Satellite A500 - problem with the monitor after restoration
Hello
I have a Satellite A500. He has a problem with the monitor for a while, when you turn it on it's all lines etc. and you can not read but once the laptop to boot completely it is fine. My problem is that I wanted to do a restore, but I couldn't because the screen problem it started so I plugged into an external monitor and perform the restore. That has worked well.
But now the laptop recognizes any my laptop screen. When you go to view it offers no other monitor choice other than external, I used for the restoration. I downloaded the display driver but nothing has changed.
ANY IDEAS?
Thank you
(I have the disks for the restoration, if that helps.)
> There a problem with the monitor for a while, when you turn it on it's all lines etc. and you can't read
If I understand you right you can see when laptop starts and you see Toshiba welcome screen. Is this good?
When you enter the BIOS settings you see thise lines too?
Later, when you see the desktop on the external monitor, you can use the FN + F5 key combination to switch between an LCD and external monitor. Please try to use it and post comments if it works or not.
What operating system do you use?
Tags: Toshiba
Similar Questions
-
Satellite A500 - problems with the temperature of the GPU
The thing is playing Age of Empires online I started having problems with the temperature of the GPU. When you run the AIDA64 the CPU stress test can hold up well, but after 35 minutes the test what AIDA suspended while the GPU fan can't seem to download their revolutions, (I guess that if there was that a rise in temperature would increase the speed of rotation of the fan, don't).
I consulted the manufacturer of the GPU, nVidia, (the graphic is nVidia GeForce GT 230 M) and tell me to contact Toshiba for other options, since, according to them, the problem is not the GPU.
Any ideas or suggestions?
You use your laptop to factory settings?
Have you installed something that may be responsible for this (non-Toshiba display driver)? -
Satellite A500: problem with the driver of sound and display after update!
A500 Windows 7-64 bit
I download the latest driver (6.0.1.6048) sound and display driver (8.16.11.8973) and I have a few problems.
The colors are too bright and the sound is too deep (as the middle are too low).Hello
Then why you n t go back to earlier versions of the driver?
In your case, I would recommend setting the operating system at the point of time at first, until you have updated the drivers.
Usually, this should help to recover the old drivers again.Welcome them
-
Satellite 1905 - problem with the touchpad after awakening from Hibernation/standby
Greetings.
I've known a few interesting problems with my Satellite 1905 - S301.
Whenever he wakes up from hibernation/standby my touchpad stopped accepting "taps" as a click on the left button of the mouse. It works normally with finger motion detection, but stops at all but it is quite annoying to restart the machine whenever he returns from hibernation mode.I've done a small workaround and after I close the laptop lid still works but this isn't the way it should work, I would have preferred that she either Hibernate than running for 10 hours without any sense;).
Can someone give me the solution to this problem, please?
Thank you in advance.Kind regards
AkarHello
I agree with you. It s very boring to restart the machine each time to use the touchpad.
This problem appears on the first day?I think there might be a software problem and, possibly, the new installation of operating system recovery CD Toshiba could help.
I know, the complete installation is not the best solution, but it might help.You should also check you the touchpad. Satellite 1905 - S301 was designed for the U.S. market and so I checked the American website for available drivers.
It seems that 5.3.203.2 is a newer version of the Alps touchpad driver for Windows XP.I suggest to reinstall the touchpad driver and check if there is no improvement.
-
Satellite A500 - problems with the creation of recovery disks
Hello
I bought a Satellite A500 yesterday and now I'm trying to create the recovery discs before anything else.
However, towards the end of the 1st DVD I get an error message saying "Faile dto open the next file. e:\Boot\BCD (0201123-F1-00000000 error code)"and then when I click 'OK', the DVD is ejected giving a message"unable to create recovery 1' media. Physical examination, I noticed that the DVD is written almost entirely.Any advise on this? In addition, in the interface, it shows a USB option and says to insert a USB media with more than 7 GB of free. That I can use it to create the recovery disk? If Yes, when I reinstall windows 7, this allows as a bootable drive?
Greately appreciate any help on this matter. If it is defective, I want to return as soon as POSSIBLE.
Thank you
Mercier.As far as I know, that you can not use external device for recovery, it is therefore very important create recovery DVDs.
Try to create the recovery disk using only DVD-R media. Use high quality media like TDK or Verbatim.
Last month, I've created on the Satellite A500-157 recovery discs and everything went well. -
Error message indicating the problem with the monitor of devices in Windows XP.
Original title: Device Monitor
Error message indicating the problem with the monitor of devices in windows xp. How to fix?
Hello
1. when exactly you receive this error message?
2. What is the brand and model of your computer?
3. What is the exact error message that you receive?
Please provide us with more information about the issue so that we can provide you with the necessary assistance.
-
Problem with the rules after upgrade of the VM in foglight cartridge
Hello
There is a small problem with the rules after that I updated the VM cartridge level.
In the default rules, I changed a few settings so that they will act as I need.
However, each time I upgrade VM cartridge my rules are off and marked as backup.
The question is: is there a way to upgrade the cartridge and keep my active rules after upgrading?
Best regards
Victor
This is the normal behavior according to this KB article
https://support.quest.com/SolutionDetail.aspx?ID=SOL105872&PR=Foglight
105872 knowledge article
Title
Backup rules fill in the dashboard management rule after Foglight upgradedDescription
After that an upgrade of Foglight was conducted, several backup rules are created for rules that have been published before the upgrade. For example:
Cluster VMW IO network
Cluster VMW IO network (backup)Resolution
During the upgrade procedure, the FMS has detected that some of the original rules have been changed in some way. It copies the rules previously upgraded in backups, before trying to merge the contents of the update rule in the former.
Assuming that the FMS works as expected, the rules of backup can be deleted. However, it is best to confirm this in the respect of the rules first before making deletions.
When editing rules, particularly rules OOTB (out of the box), it is recommended to copy the original rule, disable the original rule and edit the copied rule. This should reduce the risk of the problem described in this Article.
Golan
-
Premiere Pro CS4 - problem with the monitor program.
Hello. I am not able to solve the problems with the monitor using PremiereProCS4. When I drag a photo (also only one photo) in the timeline panel and read it in the monitor program, vision in the monitoring program is not monitor of race: black or a small part of the picture appear... sometimes changing colors. ASUS P5QPRO Intel 9550 and Sparkle Nvidia GeForce 9800 GTX + 1024 DDR3; directX and the latest gpu driver are installed. Different configurations of Strath discs have been tested. Where I'm wrong?
Although largely in the max. PrPro range, which is always likely to much larger size than that required. This ARTICLE will give you general information and a workflow possible.
Coming from the camera, JPEG should be RGB already, so no problems with CMYK.
Good luck and hope that helps.
Hunt
-
ThinkPad X 230 Windows 7-64: problems with the screen after updates
Hi all
I have a problem with the Thinkpad X 230. After a recent update of Windows 7 (64-bit), the screen resolution is set to 800 x 600 and brightness to the minimum. FN + F8/F9 does not work. The brightness is uncontrolled. I had to restore the system before the update.
How to solve the problem, do anyone know?
Thank you!
Isosik
Hi Isosik,
Welcome to Lenovo Community!
According to the request, we understand that you are facing problem with the display resolution on your ThinkPad X 230.
If you have updated the drivers from Windows update, sometimes this kind of problem occurs with windows generic drivers for cause of driver incompatibility, suggest always update drivers only via the ThinkVantage System Update utility. Update only the application of Microsoft Windows Update.
You can also manually download the drivers from the Lenovo support site.
I hope this helps.
Best regards
Agnes Kumar
-
Satellite A200 - problems with the AC adapter / CC
Hello
The problem concerns a Satellite A200 (PSAF6A-02H01N).
Recently, there was problems with the laptop, taking several attempts to boot to Vista, it would lock up while loading or just hang and freeze just after loading Vista.
But once it was up and the laptop running would be happy working for hours with the AC adapter is plugged in.The problem got worse now and the laptop will not load Vista end without crashing.
We have now reduced the computer down to have only a problem when the power adapter is connected.
The laptop battery will charge normally with the AC adapter is plugged in and the laptop on standby or off.The problem persists with the AC adapter is plugged in and the battery removed.
The laptop will start and run perfectly with battery and no power adapter plugged. Once the AC adapter is plugged in the laptop indicates that the battery is charging and then after a few seconds it crash or freeze and the only escape is a full stop.
The laptop will not work under the battery power for 30 minutes max.
I checked the output voltage of the AC adapter and this seems to be a consistent 19.4 Volts.Is this only a problem of AC adapter or the problem with the laptop?
Thanks in advance...
The Canada Gazette
I lifted the previous discussions on this problem and found one that was very similar, but unfortunately the user decided not to find the problem of the road, save money and buy a new laptop instead! Hmm. !! .. seems to me like this might be a prob. material. Maybe a new motherboard?... anyone have an idea of what are the costs for that perhaps? .. an ASP or decent technician backstreet?...
-
Problem with the touchpad after upgrade to Windows Vista
After that I've upgraded to windows vista I had problem with the touchpad, that I'm not?
Can U help me!
Maybe when you tell us what model of laptop you have. ;)
-
Satellite U500 - problem with the cooling system has been detected
I have a Toshiba Satellite U 500 series, and I just got a message saying "a problem with the cooling system has been detected. Please turn off the power immediately and return it to service.
Before that, I would like to know if anyone has had this problem and if there is a software solution?
HIERARCHICALCheck HERE to see if anyone else had this problem in the past.
-
Problems with the condenser after the recent update tool
We have problems with the condenser so tool. The filter works correctly, but after a 'white' to use (looks like most exposed) rectangle remains in the image that cannot be deleted. We tried different layer modes without success: it does not react or the rectangle disappears but both the effect of the filter. Seems to be a bug (?) - Please help us as soon as possible. Thank you!
Hi meuschke,.
Our engineers are working on this issue, in the average as you try the below work around.
After you change a 16-bit image using the Liquify Filter, edited areas are lighter than the rest of the image.
Solution
In the meantime, there are two solutions:
Use pictures 8-bit instead of 16-bit images with fluidity
Disable the GPU use to liquefy holding the key Option (Mac) or Alt (Windows) key down while you select the Liquify Filter in the menu filter.
Related link: with the help of fluidity on the results of the 16-bit image areas clearer around changes
Let us know if that helps.
Kind regards
~ Mohit
-
Re: Satellite C650 - problem with the devices connected to USB ports
Hello
Can help someone, I have a C650 and everytime I try to connect to something to him via the USB ports, it is not "found" by the computer?
The other night, I tried to get pictures on my phone but it wasn'; work and I put it down to a problem with the phone, but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.
The laptop makes a beep sound as it would on an extraction device when you plug... I hope that makes sense. So I am now assuming that the problem is with my computer, is there something I can do to fix this?
Thanks in advanceSorry should add - it's like nothing is plugged at all when it is, and it happens on two USB ports, not just one...
Post edited by: leahhw123
Hello
What happens with plug n play like USB mouse device?
You are able to use an external USB mouse correctly?> but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.
I guess this could be a problem with the software or drivers installed.I searched a bit and his city that he has a software is compatible with windows vista/2000/xp. Win 7 is not mentioned do not know if this could be a problem, but in your case, I recommend asking the support of this software product for some advice.
In addition, you can try to install this software once more, check whether this USB problem appears again.
-
Problem with the gallery after update 2.3 music
Hello
Recently updated my XperiaX10i (French version, not operator sim locked). No problem with the update itself and the phone seems to work fine.
But, the music gallery has first not detected music files already in the sd card 32 GB (no problem for photos, videos or other files), and does not so load in the library. I had to download them all again through Media Go and now the library shows them, but album covers are not more in the album list as in version 2.1, which was very convenient for the selection, however the sleeves appear in the background during playback of a track: this looks more like a bug than anything else.
I am also missing the first Quick Launch bar application for Wifi, Bluetooth, GPS, sync and the brightness of the screen, it seems that the launch of all these features to go into the settings file now.
In conclusion, I hardly see what exactly improved on this phone since version 2.1. except maybe the speed and the quality of the screen display.
Update from 1.6 to 2.1 was a total revolution in comparison.
Power control widget is always there
Maybe you are looking for
-
Toshiba virtual Store account Reset - 35408
Eliminated appreciate 35408 personal account number. Thank you.
-
Is my Toshiba Tecra A10 authentic?
Hello I'd like to find out if my Tecra is authentic? There are so many construction problems, that is not authentic? Little chance but just in case... Thank you
-
HP Photosmart C4480 all-in-One takes forever to print
HP Pavilion dv6-6061eo laptop Serial number [personal information deleted] Prod, number: LQ769EA #UUW Printer: HP Photosmart C4480 all-in-One connected USB Operating system: Windows 7 - all updates - updates of August incl. -ETH on Troubleshooting do
-
I need XP Tablet edition... where can I get iso, or whatever it is?
Anywhere I can xp tablet edition iso? Not trying to promote piracy, I need just an iso and I alreeady have key.
-
move or copy folders Windows Mail
How to send an entire folder of emails from Windows Mail to another computer - or send a copy of the entire folder to another computer? I'll leave a computer and I want to migrate the content of emails to a new computer, but should always be to send