Satellite A505-S6922 - how to install Windows 7 drivers?

Similar Questions

• Satellite A210-15Y - how to install Windows XP?

  I had Windows Vista and I improve it with Windows 7. Now, I really want to install Windows XP.
  When I put the Windows XP CD in after awhile I get a blue screen whit an error.

  pls tell how to install Windows XP on my laptop and if I need some drivers do pls put links of whereIi can get them.

  PS Sorry for the bad English

  Hello

  I think the problem is that you tried to install Win XP without installation of the SATA driver.
  The A210 need driver SATA to recognize the HARD drive.

  You can also check the BIOS settings. There should be an option called SATA mode.
  This can be set between AHCI and compatible and this will allows you to install the Win XP without the first installation of SATA drivers.

  Also check the other threads here in the forum on the same topic!

  PS: It is advisable to use Win XP including SP3! You can include the SP3 using nLite software!

• Satellite u300 (PSU30E) - how to install Windows XP?

  My Vista broke down so I removed and installed ubuntu, which works very well. However, I would like to install a windows on this as well. Because I lost my disk of vista I tried with XP. It worked fine with virtualbox virtualization but when I tried to install it properly it worked as it is enjoyable. I got an error message during the installation process «Setup has not found any hard drive» I tried "slipstreaming" a storage on the installation as disk driver advised on this article:

  http://www.howtogeek.com/HOWTO/Windows/resolving-Setup-did-not-find-any-hard-disk-drives-during-Windows-XP-installation/

  But laptop refuses to install from the newly formed disc and if I was still facing the same problem. Another option that is described in the article was to disable the native control of SATA BIOS. However, my laptop only has trusted Core BIOS Phoenix that do not allow to make these changes, and if I read between the lines of this topic:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=175764

  .. There is no way to access this kind of parameters with my current BIOS. So my question is then. Is it really impossible to install windows XP on this computer without floppy drive where you could put a SATA driver or is it possible to work around this problem? Vista is such a disappointment to me that I might have to consider buying windows 7 if it does not seem likely that XP starts to work, and in this case, I am afraid that the power of this machine is not sufficient for this operating system.

  All good advice about what to do?

  Hi Kylanmies,

  The magic word is Intel Storage Manager. This package contains the SATA drivers you need, and you are able to install Windows XP.

  Here are a few interesting articles from Toshiba on this subject:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  In addition, visit the forum... You will find hundreds of threads according to me.

• Re: Satellite P200D - 11L: how to install Windows XP

  I have a laptop Satellite P200D - 11L for about 5 months and it has preinstalled windows Vista.
  I can't stand them.
  They crash every 5 minutes and they consume all my resources for no reason!
  I can't run any program for my work that I used to run under XP without problem because of the incompatibility.

  I just discovered that I can not play games for reasons of incompatibility.
  I can play games that are very new, and of course these games play well due to lack of resources.
  I'm desperate. I tried loading XP on it, but it just stops when I boot from the XP one cd will not open again.

  I need to install urgent XP but I don't know how.
  Please give me a few steps or a few links so I can get rid of this bad software called vista.

  Help!

  Hello

  I think I know what you the problem might be.
  First you must make sure that you Win XP CD contain the SP2.
  I know the different problems that might appear during the installation of XP if a SP2 was not included. If you XP CD doesn't have a SP2 then use the program nLite to built your own XP CD with SP2.

  In addition your P200 supports the SATA controller and you will need to install the first SATA driver (among others).
  It is not very difficult. You need the Intel Matrix Storage Manger.
  During XP Setup, press F6, and then you could include the the USB FDD drive SATA driver. Search this forum for more details. There are many useful discussions.

  This crib of storage can be downloaded from the Intel Web site or on the European driver from Toshiba website.
  Unfortunately, for Satellite P200D XP drivers are not available on the Toshiba page at the moment and I think you should try some different P200 series drivers.

  Good bye

• Satellite Pro M70 - how to install Windows XP?

  I bought a Toshiba Satellite Pro M70 of second hand and I want to reinstall WinXP.

  I did not have the Toshiba Recovery CD but I have a my own WinXP disk. It would be OK to reinstall Windows with my own WinXP disc?
  If the answer is Yes, should what order I install the drivers

  Your help is appreciated

  Hello!

  In my opinion it's is not a problem if you use your own Windows XP to install it on the laptop that you can do this of course.

  Have you checked the Web from Toshiba site?
  You will find a document setup instructions for Satellite Pro M70. This is a list of the recommended driver and the order of installation of the tools. Check it!
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• How to install windows xp over vista on a toshiba satellite A200 1YO

  How to install raid/scsi drivers and get rid of vista for good

  you will need

  AT ¢ A? Â ¢ 1 USB external floppy drive
  AT ¢ A? Â ¢ 2 diskettes
  AT ¢ A? Â ¢ 1 set of drivers for the hard disk on the computer
  AT ¢ A? Â ¢ a legal copy of windows xp pro

  WHAT DO WITH DISKETTES

  COPY THE DRIVERS DON'T CUT AND PASTE

  AT ¢ A? Â ¢ DISC 1 and place the drivers required on disk, because they did not all folders
  AT ¢ A? Â ¢ get DISC 2 and make a folder called $OEM$ and in this folder make another one called TEXTMODE then in this case insert the drivers you have in disc 1

  Installation of the drivers and windows xp pro
  AT ¢ A? Â ¢ when windows asks you to press F6 to install the raid drivers, press F6
  AT ¢ A? Â ¢ DISK1 then enter the floppy drive
  AT ¢ A? Â ¢ when it prompts you to press "s" to install the raid and storage controllers...
  AT ¢ A? Press and A ¢ press "s" again to enter on the same raid driver, you just tell windows to use
  AT ¢ A? Windows ¢ A say while there already drivers for the raid controller
  AT ¢ A? Â ¢ press the appropriate key to tell windows you want it to use own disks instead of windows drivers
  AT ¢ A? Â ¢ after loading the disk drivers
  AT ¢ A? Â ¢ wait for windows to ask you once again the drivers then insert DISC 2
  AT ¢ A? Â ¢ and windows finally installed vista WENT you need drivers for any hardware of your computer system, but they should be easy to get from the manufacturers website

  I used this method and it worked with a Toshiba laptop satellite a200 1yo with no problems

  PLEASE LEAVE COMMENTS ABOUT HOW YOU GOT ON TO LET OTHERS KNOW THAT THIS METHOD WORKS THANKS

  Post edited by: tamwilson

  How to install raid/scsi drivers and get rid of vista for good

  you will need

  a? ¢ 1 USB external floppy drive
  a? ¢ 2 diskettes
  a? ¢ 1 set of drivers for the hard disk on the computer
  a? ¢ a legal copy of windows xp pro

  WHAT DO WITH DISKETTES

  COPY THE DRIVERS DON'T CUT AND PASTE

  a? ¢ DISC 1 and place the drivers required on disk, because they did not all folders
  a? ¢ get DISC 2 and make a folder called $OEM$ and in this folder make another one called TEXTMODE then in this case insert the drivers you have in disc 1

  Installation of the drivers and windows xp pro
  a? ¢ When windows asks you press F6 to install the raid drivers press F6
  a? ¢ DISK1 then enter the floppy drive
  a? ¢ When it prompts you to press "s" to install the raid and storage controllers...
  a? ¢ Press "s" again and press enter on the same raid driver, you just tell windows to use
  a? ¢ windows will say while there already drivers for the raid controller
  a? ¢ Press the appropriate key to tell windows you want it to use own disks instead of windows drivers
  a? ¢ After loading the disk drivers
  a? ¢ Wait windows will ask the drivers again and insert DISC 2
  a? ¢ and windows finally installed vista WENT you need drivers for any hardware of your computer system, but they should be easy to get from the manufacturers website

  I used this method and it worked with a Toshiba laptop satellite a200 1yo with no problems

• How to install Windows XP Home on my Satellite L500-1ZP?

  I formatted my Satellite L500-1ZP (PSLS9E) and thought DLI install win xp instead of win7 (do not have the disk/partition backup)
  now, when I start it with the cd of windows XP blue screen 'windows setup' inside start but when its finished loading, it gives me an error code:
  ' * STOP: 0X0000007B (0XF78DA63C, 0XC0000034, 0X00000000, 0X00000000).

  I read somewhere that I need to download SATA drivers for my laptop and do a disc to install windows xp with the SATA drivers on it?

  I tried to get these drivers, but I don't know that I have need and how to do the installation disc
  I copy my original windows XP Home cd and put the drivers in a folder somewhere on the disk?

  I hope someone can resolve my problem because the laptop is just over a year, and I don't really want to buy a new...

  I just hope that you created the recovery DVDs until you started to install own OS. After clean operating system installation you not longer have access to data recovery.

  You are right. For the installation of Windows XP Home edition, you need SATA driver. How to install Windows XP Home edition on the new laptop models that you can read on http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm

  In the end, I must say that your last sentence is pretty confusing to me. You bought the laptop designed for Win7 and you want to use the old WXP on this. Do you really think you need to buy the new laptop if you want to install Windows XP Home edition?

• Re: How to install Windows XP Home on a Satellite L40 - 17R

  I bought a laptop Satellite L40 - 17r without Windows installed and the store didn t give me all the drivers also.
  When I check your "how to install windows XP on a L40.pdf. It says to download the driver package that I can't find on your website.

  I have a Windows XP Home genuine SP2, but I can t install as WXP does ' t find the hard drive.
  I'd be the appropriate driver package to install Windows XP on my laptop.

  If I have an external floppy drive can't, I used a USB drive external hard also add the necessary drivers so that Windows XP can see my hard drive (160 GB HARD DRIVE (5400 RPM) SATA).

  Thanks for your response
  Xavier

  Hello Xavier

  I think installing WXP on L40 laptop is most asked in recent months. I recommend to check this forum category and you will find answer to your question. If you have no floppy, it shouldn't be a problem at all. Solution is Nlite software.

  Use as search terms in the advanced search option and you will find so many threads with exact explanation on its use.

  http://www.nliteos.com/nLite.html

  If you still have any questions please post again.

• How to install Windows XP on the Satellite A200 - 20 c

  Hello!
  I have a problem with my Satellite A200 - 20 c. I want to install Windows XP Home edition, and I can't find the drivers on the hard drive. Where can I find it? How to install Windows XP Home edition? Could someone help me?

  Hello

  I see that you didn t read some messages in the forum here. There were so many threads on your problem created and discussed. You only need to use the search function "Search Forum Boards" and type something like "A200 WinXP" or "WinXP Sata" and you'll get more then enough threads/posts where your problem was already discussed and resolved.

  Hope yoúll find what you need.

  Welcome them

• Re: How to install Windows Xp on pre-Vista laptop Satellite A300?

  Hello

  I am now faced with a problem when I try to install windows xp on my pre-operating system Windows Vista laptop...
  A300 when I entered windows xp disk and boot from the cd/dvd... There is an error telling me that: you have viruses on your hard drive or scanner virus, or something like that, but I test the same OS disc in another pc and his work I also Gdata IS 2012, and I think that his restriction from toshiba or I don't know , but it is very important to install windows xp...

  I hope help you how to install windows xp on my laptop.

  Concerning
  John

  Hello John

  It is not easy to understand the whole situation, especially the part with the virus.
  In my opinion, Windows XP Home edition installation should not be problematic.

  What you need is Windows XP Home SP2 or SP3 and driver SATA edition disc. Without SATA driver disk HARD will be not visible to Windows XP Home edition.

  More info on what you can read on http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=38

• How to install Windows USB on the Satellite L50D.-c 10.

  How to install windows 10 usb?, model L50D-C

  https://www.YouTube.com/watch?v=psPWQy3-5B0

  Might help u

• How to install Windows 10 on mac not supported

  Hi all

  I have a MacBook Pro 15 inch 2011 lag and I try to install Windows 10. I've tried 3 different methods. I can provide more information if necessary.

  I had running Windows for 10 minutes (2 reboots) until he got stuck on the screen to start due to an unknown error (probably error compatibility)

  I am currently give up and try to install Windows 7 instead, hoping that he'll be fine

  If any of you guys have any suggestions please tell me this is greatly appreciated!

  I am currently give up and try to install Windows 7 instead, hoping that he'll be fine

  I don't think that you can install Windows 7 with Boot Camp on El Capitan:

  • A Microsoft Windows installation media or disc image (ISO) containing a 64-bit version of Microsoft Windows 8 or later *.

  From: How to install Windows using Boot Camp - Apple Support.

  Windows 10 is simply too new for your Mac, and Windows 7 is too old. It is quite a difficult situation. If you really need Windows, you would need to get a copy of Windows 8, or put to level to an earlier version of Mac OS X with a version of Boot Camp that works in Windows 7.

• How to install windows 8.1 iMac (27 inch, mid 2011) without DVD drive and race El Capitan

  Hello! How to install windows 8.1 iMac (27 inch, mid 2011) without DVD drive and race El Capitan?

  I read everything I could on the subject and could not get the Boot Camp Assistant to create the USB key. Can you help me?

  Boot Camp Version 6.0.1

  If you run the wizard of BC, are you give the possibility to create an installer from USB? Did you change Bootcamp Info.plist file?

• Re: Portégé R700 - how to install Windows 7 on new SSD?

  Hello!

  I want to change my HDD in Toshiba Portege R700 to SSD. How to install Windows 7 on this new SSD? I don't have any Windows installation disc.

  Or that it will be possible to move the partition of the old HDD to new SSD (using Acronis, I could move the partition on the new HARD drive)?

  I've heard of partition offset and this SSD block should be the same as FAT cluster (the same alignment).

  All advice? (I know should I defragment my HARD drive before moving :))

  Hey Buddy,

  > I do not have any Windows installation disc.
  Create the Toshiba recovery disc as mentioned in the manual of the user before you exchange the disc, then you have a Setup disk. The Toshiba recovery disc will restore parameters of the box with all the drivers and tools. It can be used on each disc and how many times you want.

  After this change the drive and start the Toshiba recovery disc. Follow the instructions on the screen and everything will be installed.

  Check this box!

• NB100 - how to install Windows 7 without CD player

  Hello. I was wondering if anyone knows how to install Windows 7 Pentecost on a CD player.

  I have an external HARD drive.
  Is - this posibel to make an image on this one to boot from?

  Hmm, I think that's not possible.
  I know that it was possible to install Win XP without the disc.
  You simply copied the folder integer i386 to the HARD disk and executed to the Winnt. EXE

  I have no experience with Win 7 but I also didn t find details that something like that would not be possible so I guess that's not possible