Satellite A60-106 does not start

Can anyone help? When I turn on my A60 106 it happens with a text screen that says Windows (XP) will not start and a few basic instructions. There are 5 options listed - Safe Mode - Safe Mode with network - safe mode with command prompt - known last good configuration - and start Windows normally. None of them work, computer goes to the Windows XP logo normally then flashes to the toshiba logo, after what the power seems to cut and it is up to the text with the options screen. Which if left constantly looping. All the ideas!

Hey Warren,

Whenever I encountered this behavior it is always caused by a defective hard drive. Indeed the system cannot be loaded because the required files can be read from the HD.

You can try to re - install your recovery CD system in the hope that it is just the files that have been corrupted, but if this also fails then a new HD will be required.

concerning

Tags: Toshiba

Similar Questions

  • Satellite A60-672 does not start after upgrading memory

    Hello

    I bought an additional memory for my laptop, but after installing it the PC will start is no longer, when I turn it on it makes a brief noise then nothing. After taking the memory expansion out again once, the laptop still does not start.

    Peter

    Hello

    I agree with "guy sos." There is no doubt motherboard problem now. I assume you used the incompatible memory module.

    In any case, contact the after-sales Service of Toshiba partner in your country and explain to them the situation. The address that you will find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

    Good bye

  • Satellite a60-106 does not recognise handycam

    Hello
    I got my satellite for about a month and everything works fine but when I try to transfer video to my handycam I get an error on the screen of the camera saying "usb invalid during easy handycam" sony's site is all the answers. Other usb devices work fine.
    Any help appreciated.
    Thank you
    Barrie

    Hey Barrie

    If you have a specific problem like that he will always be interesting to know what external device will connect you to the laptop (with Sony). In my opinion, it is not a USB problem but a specific question. Usually in this case the producer of the outdoor unit must have an answer.

    I assume you are using the software given by cam. Check if there is some play/edit menu and the option of USB stream and assign him normally. Usually, it is set to off and the pc doesn't see the cam.

    Good bye

  • Satellite C650 - Windows does not start correctly

    I have a Satellite C650, who does not start, when it lights there are two options, Startup Repair launch which leads to a black screen and mobile arrow, the screen remains like that until you turn it off the button stop (seriously ive left for about 10 hours). The other option is to start windows normally resulting in a blue screen and the laptop restarts itself.

    Help me please, make things worse I can't find the box that it came in which contains the guarantee and recovery disc

    Hey Buddy,

    You can start your laptop in safe mode? This means that if you press the F8 key before Windows starts and you choose Safe mode can you start Windows?

    If this isn't the case I think that it s something wrong with your Windows installation and that's why you need to use the Toshiba Recovery disk to restore to factory settings.

  • Satellite A200-1BJ does not start

    Hello

    My Satellite A200-1BJ does not start. After turning on the button it starts only for 1 or 2 seconds (flashing light, work from HDD, fan work, display blank) and then it turns off automatically. Once it happened days before but I didn't have the time to solve it and over the next few days, he has not occurred. Now, I tried to launch it more than 20 times and it still won't start.

    I tried only with full battery and also only with the power adapter. I removed the HDD, RAM, keyboard, DVD, speakers, display and a few other connector under the keyboard and it still does not start and it shuts down after 1-2 seconds each time.

    In recent months he sometimes exploded due to overheating during work so I cleaned the dust inside.

    No problem with the motherboard or power?

    Thanks for help.

    Hmmm... on this virtual path, it is not easy to say what the problem is. described behavior is the same as in cases when the BIOS is dead after failed BIOS update installation.

    Of course, it's mainboard problem but what exactly, it is not easy to say. For me, this looks like faulty BIOS.

    Have you installed any updates or anything that may be responsible for this?

  • Satellie Pro A60 EN does not start

    My satellite Pro A60EN does not start. When I turn on the power there is a slight click, but it does not read the disk. If I boot with a bootable CD, it starts the CD/DVD drive, but does not start. The HARD drive is OK, as I tried it on my desktop (using an IDE USB connnector).
    East - the CPU, motherboard or RAM?
    Any help much appreciated.

    Hello

    To find out what s wrong some diagnostic tests are needed.
    If you checked the HARD drive and if it s ok so I guess there must be something wrong with the motherboard. But it is worth checking to be sure 100%.
    The fact is that the motherboard is an expensive piece and you should check it out before you replace something.
    Sorry I put t see any other solution.

  • Why Satellite Pro A300 does not start when you press the power button?

    Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

    In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
    Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

    What should I do to get a normal departure procedure?

    When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

    When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
    The same thing happen on my Satellite A300.

  • Satellite P200-143 does not start

    My Satellite P200-143 does not start. The led lights up and the drive light flashes once then nothing. Holding the buttome 'on' for 10 second light outside.

    I tried to take out the battery for the afternoon, but no effect

    Any suggestions?

    P

    It looks like a dead last.
    The P200 is a new series and I think that the guarantee is valid. Then contact the ASP in your country and ask for help.

    Good luck

  • Satellite Pro A120 - does not start with 4 GB of memory

    Hi all

    I'm new here so please be gentle!

    I have a Satellite Pro A120, model No. PSACOE - 037014EN and you want to increase the memory 512 MB present. I tried 2 different sets of memory 4 GB (2x2gb), but the machine does not start. I tried the different modules together and on their own but still no joy.

    Where I'm going wrong? This model will not take 2 GB memory modules?

    Any advice will be appreciated.

    Best regards

    Dr. Feelgood

    Hello

    Before changing something about your hardware, please make sure that if the computer supports the new pieces of material and, therefore, you can also consult the user manual.

    Anyway, I checked this and this laptop can only be upgraded to 2 GB maximum. This means that you can use the module of 1 GB in each slot and * no * 2 GB in each slot.

    So please bring back the memory modules and buy 2x1GB. It will work.

  • Satellite L40-139 does not start

    ? 19/02/2014 18:41 - edited? 19/02/2014-18:45

    Hello, I have a problem with the SATELLITE L40-139

    the thing is when I press the power button / stop, hard drive led will begin to Flash, CD-ROM led is lit and the screen is black. I noticed that advise in the CD-ROM makes a sound ICT in the same way the hdd led flashes (when it flashes I hear a tick form CD, yes I unfolded any computer laptop).

    I can only say that I have connected my PC HARD drive and it's working., good fan is not working too, but I think it will start, after some time (as he always did)

    Notebook crash circumstances are now saying: that a year ago, he fell from 1 inch (such height ;]) I saw that the ribbon cable connecting the touchpad to the mohterboard was broken and my diidn can't start computer, I thought that there's a problem, but I forgot and left the laptop for more than 9 months (with hard disassebled and battery and cd-rom drive) and then I decided to try to turn it on.
    And viola! It works it boots etc.

    After a month of being happy, I'm drunk I couldn't sit on the Chair and I decided to sleep with my laptop on the bed, I lied right down and put the laptop on my belly and it crashed (screen freezes) so I decided to reboot, but it does not start.

    Here is a video with what I get when turning the power on it: [http://www.youtube.com/watch?v=jC0pGBBVwJk] (not Fortunately my phone fell in the mud and shifts when I record videos)

    Some people suggest I should connect an external display to see if theres no picture but the result is always the same. (Screen not even fuels not on)

    Maybe someone could help me fix without sending it to the customer service.

    See you soon.

    On this virtual path, it is not easy to say what the problem is here. Of course, you can try to do some tests and try to make some conclusions which may be wrong. After his last stop somewhere I think that there is big problem with graphics card. Of course I can't say it for sure.

    Diagnosis just exact mainboard can offer answers. I m afraid mainboard is dead and must be exchanged.

  • My Satellite 1405-s151 does not start

    Soory for my poor English
    my laptop does not start. When I press the button, the power turns on (green light) but nothing else happens. the screen, the CD-ROM drive does not work. Sometimes, the fan runs.

    Sometimes when I turn on the laptop it works but rarely

    I tried to remove the battery but nothing

    Please help me

    Is it possible to be the motherboard? I ask this because sometimes he dot.

    I would also like to know how to boot from a cdrom drive external usb?

    Thank you very much

    Hello

    This does not seem very well! Would you see the Toshiba logo red when you try to start because when you do not see the Toshiba logo there is a failure that is quite sure of the hardwaree!

    How long it works when it is started?

    Have you changed any hardware in the past?

    Tips: Your Satellite 1405-S151 is an American model.

    So if you want to install drivers or to do a BIOS update to go to the following site

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_modSel.jsp?MOID=&hideModName=true&BV_Session ID=@@@1329406085.1096615446@@@&BV_EngineID=cccea dcmjdkdldecgfkceghdgngdgnj.0

    To bye chris

  • Satellite 1800-400 does not start, or crashes after upgrading RAM

    I have the original configuration of RAM for the S1800-400 with 120 MB. I bought a 256 MB RAM with the following description: EXT256-3069/JR, MEM 256 MB RA Toshiba Satellite PRO 4600 series C650, PIII-7500/750/800 #PA3069U (I think the brand is Transcend).

    When I put this slot in the machine, keeping the original and start the computer, it does not start, either on the initial screen of freezing before downloading anything either or that goes to the screen where you can start it in safe mode, but then it does not start.

    I removed the new RAM and it works well again.

    What can be the problem:

    (1) is this new RAM is not compatible with the computer? Based on the selections of the internet service provider, it should be (it's a Portuguese company with their own memory configuration options).

    (2) the computer can work with the original 120Mo and the new 256 MB, or should it be both the same size/brand?

    (3) is there any other problem that I don't have?

    TKS

    Hi Ricardo

    I agree with feliks.
    The module is not compatible and not taken in charge can be responsible for your problem.
    The best way is to use the Toshiba recommended of the memory modules.

  • Satellite Pro L50 does not start with 8 GB

    I have a brand new L50 Pro of Satellite (PSKK3A-001001)

    Config of RAM is default of 1 x 4 GB memory DDR3 12800 1 use slot 1 slot free
    I removed 4GB and install 1 DDR3L 12800 8 GB but it does not start.
    The form of State capacity 16 GB so with 2 slots logically, that means 2 x 8 GB cards.
    He also said DDRL, which I assume is the correct type.

    The 4 GB mark was Hynix and the 8 GB is Apacer.
    Anyone have a resolution on this or know what the problem is?

    On this forum you can find many threads where people describe similar problems. In most cases the problem is compatibility modules, especially if Ram needs to be upgraded with modules produced by different manufacturers.

    According to the specifications of the laptop you need DDR3L memory (1600 Mhz).
    Talk with your dealer and ask if there's Kingston compatibility module. Kingston offers high quality and 100% compatible memory modules.

  • Satellite Pro L20 does not start

    I have a new satellite pro L20 M750
    does not start
    the thing is since the first time I tried to start it it would not start.
    I bought it over the internet and is still brand new in the plastic bag, would there be anything to make this power for the first time or it is defective.

    Thanks in advance

    Hello

    Did you check if the AC adapter is working properly?
    Initially, the battery is not charged. You must connect the power adapter to recharge the battery.

  • Satellite A200-AH1 does not start problem

    I have this Toshiba Satellite A200 - AH1 laptop computer that will not start.

    The system has 1 GB of RAM, (2x512MB).

    When I remove 1 stick, the system starts without a problem, if I replace it, and the other, the laptop boots also upwards. I tested the two ram slots and ram spent each time.

    The problem of the laptop does not start only seems to happen when the laptop has installed two sticks. I tried even to 2 different new corresponding sticks and still nothing until I remove 1 piece of ram.

    Everyone encountered this problem before?
    Any ideas what the problem may be.

    My only other option would be to install a single piece of 1 GB of ram, but I would really like a better option.

    Thanks in advance...

    > The system has 1 GB of RAM, (2x512MB).
    You got your laptop with these memory modules?
    Are you sure that you are using compatible RAM (DDR2-667)?

Maybe you are looking for