Satellite A60 becomes warmer and slower and finally turn off

Hi all
My A60 is 18 months old. In January of this year, he had one main card replaced because he decided to put it off and wouldn't restart. At that time there laptop was on the Toshiba warranty that no problem. Unfortunately after almost a year he has warm and moved offshore again. What you think, a defective machine or a qualified repairman missed a real source of trouble.
Will be grateful for any ideas or suggestions.
Thank you
Concerning
Bartek

I agree with Tobi. Probably there is more dust inside and the unit cannot be cooled properly. First thing you can do is to clean the device. The construction of the laptop, you can see if cleaning can be carried out alone or not. In your case I think it will be better to do it on the vocational track.

Tags: Toshiba

Similar Questions

  • Satellite S203 becomes hot and unplug

    My Toshiba Satellite s203 becomes hot and disconnect. The use of fan to begin with. Copper hose gets very hot. It cuts after 1-3 minutes second time after 15 seconds. What can be the reason?

    The battery has no power, but the PC is connected to the wall. Please help me.

    Leif

    > What can be the reason?
    Your laptop is probably full of dust and it cannot be cooled correctly. These symptoms are typical for dirty notebook.
    So, buddy, it's time for the cleaning of the laptop. ;)

  • After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.

    After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.

    Possible explanation.  It is likely that batteries, so fresh, can be irregular in size.   The uncertain connection would therefore tend to lead to a failure to blink and you declare.   Read my thing...

    Batteries.

  • My Ipad air2 does not start.  Tried hold it together switch with on/off switch.  Apple logo appears for about 15 seconds and then turns off again.

    My Ipad air2 does not start.  Tried hold it together switch with on/off switch.  Apple logo appears for about 15 seconds and then turns off again.

    Is there another way to start the IPAD?

    Try the steps here:

    https://support.Apple.com/en-us/HT201412

  • my iphone 5 works if connected to my charger, when I unplug it it stays on for a minute and then turns off, I can activate it after that but it turns off again. you wonder if it's my battery. I have already restored the phone, but it did not work. Help

    my iphone 5 works if connected to my charger, when I unplug it it stays on for a minute and then turns off, I can activate it after that but it turns off again. you wonder if it's my battery. I have already restored the phone, but it did not work. Help

    Most likely, the battery is broken. With AppleCare +, a replacement of the battery is free. However, without AppleCare +, a replacement battery will cost $79.

    Apple-Support - iPhone - battery and power: https://www.apple.com/support/iphone/repair/battery-power/

  • G530 flashes like 6 times and then turns off

    G530 earned months; "t lights up. Battery out and tried to turn it on with just power adapter and nothing happens. Battery put it back in and turned on only plugged while and battery lights up and blinks about 6 times and then turns off. Nothing on the screen not boot windows or anything like that?

    Remove the battery and try to start your computer. If it works, replace the battery and try again.

    If she does not press the 'power' for a few seconds, don't still no sign, contact lenovo support and ask for replacement.

  • Windows Firewall: I installed eset esmart security and it turned off my windows firewall

    I installed eset esmart security and he turned off my windows firewall and itself has a personal firewall, I would like to know what does enter the windows firewall too or not?

    Golden rule: one firewall for a computer.
    On this basis: abandon the Windows Firewall.

    t-4-2

  • mouse Bluetrack 4000 light turns on normally and then turns off on problem is not the battery

    mouse Bluetrack 4000 light turns on normally and then turns off on problem is not the battery.

    Hello

    1. your wireless mouse does not work?

     
    I suggest that you follow all the steps of the article which will help you solve the problem
     

    Troubleshoot a wireless mouse that does not correctly
    http://support.Microsoft.com/kb/321122

  • Hey guys, I just reset my mac OX system and wiped and Adobe, turned off my computer. I can go through re install with you?

    Hey guys, I just reset my mac OX system and wiped and Adobe, turned off my computer. I can go through re install with you?

    [Duplicate message deleted... post the same question more than once is confusing... MOD]

    [This is an open forum, not a direct line to Adobe support... you have to wait a response]

    You install exactly in the same way you did the 1st time... Put your disc in the drive, and enter your serial number when asked

    .

    Download & install instructions https://forums.adobe.com/thread/2003339 can help

    -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

    -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

    -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

    -you will need to enter your original serial number during the installation for non-Cloud programs

    - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

    Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  • Satellite A60-302: black and white photo on TV

    Help

    I have connected my Satellite A60-302 to my TV using brand also SCART S-VIDEO AND TWIN PHONO LICENSE that I bought from maplins. Transfers of image and sound on TV when I press Fn + F5 buttons but the image is in black and white, the sound is ok.

    I tried the color on the tv settings but it makes no difference, any help would be appreciated

    Hello

    The color on the TV settings won't help. Check please the port on your TV settings. As far as I know by the use of the pot from S-video to TV, it must be enabled properly to get the color. I put t know exactly how it works with cable SCART, but check out several channels if you should enable the option of scanning on your TV.

    I also hope that you bought the product of high quality.

  • Satellite A60 summary failure and press a key to continue

    I have a problem with my satellite A60.
    I had the computer for about a year and a half and have never had any serious problems with it of any kind. However, last week the keyboard started to fail, first with only a few keys, then the full keyboard.

    It never bothered me much because I'm quite familiar with the Toshiba computers. So I connected an external keyboard, and I was back in business.

    I used it very well so far but I put the computer into hibernation last night and when I woke up this morning he said "resume failure and press a key to continue."
    I have keys and nothing happens, it just stay on this screen. I try to access BIOS by pressing ESC when I turn on the computer and the priority is set at STARTUP DO not RESUME, hover, it won't let me highlight to change anyway. The computer won't let me boot from the cd. Basically, it's just stuck on the screen and that's all.

    I wonder if there is another way to get around this or is my computer ended for good. I was running fedora linux at the time of the accident.

    Seems difficult but not insoluble it s...
    It resembles a hardware problem, but I won't for sure.

    This keyboardthing can be a defective keyboardcontroller, because your description of the error is describing a similar case that I got with my camera.
    I send the machine to my local servicepartner and they exchanged my motherboard and keyboard and after repair of the error, I had never bothered me again.

    Just a quick question: some fluids come from on your keyboard?

    Have a nice weekend

    Welcome them

  • Satellite A60-142: motherboard and DC Jack

    Hello

    I need someone to help me.

    My laptop broke down a few months ago because of the CC is broken. I'm looking for the DC JACK model, necessary for the laptop, but as long as I have searched the web, I couldn't see everything. I bought one on ebay (USA) for the A60 series, but is not compatible with the European model of S60 142 I.

    Anyone know where I can find, or can I discovered the true model DC JACK I need?

    Thankls in advance!

    Kind regards
    Alfonso

    Hello

    If you have a European Satellite A60 notebook, then you must contact the ASP in your country to order the compatible DC Jack.
    The authorized service provider who is responsible for your country could order this tiny part directly from Toshiba.

    Best regards

  • Satellite M30 - beep Constant and powers On / Off by itself

    Last night I turned on my laptop Satellite M30 Special Edition and the login page appears, as usual. However, after entering my password the screen just went black and is stuck like this. After waiting a few minutes, I turned off the computer (hard restart my only option) and that's what Toshiba technical support told me to do the last time this happened (a few years ago). This is where the real trouble started.

    Tried to come back on the computer, but in addition to the white screen now is a constant beep sound (like a key is stuck perhaps). The only way to make the beeping stop was soft reboot of keys, which I did several times. CTRL-Alt-Del would stop the noise and computer would shut down for a few seconds, but then immediately join the beep goes again. I finally managed to get it remains powered off mode, which is the way he currently remains.

    I tried to unplug the AC and remove the battery and nothing, which makes sense. Just AC, he did the same thing, so try does not seem to be a battery problem. Tried to power a few times and always the same situation - white screen, the beep and the need to hold the power button for a few seconds get the machine to stop and stay off.

    Help, please!

    June

    P.S. I contacted support and they suggested to bring it to an authorized service center, but I don't want to pay large sums of money to fix something simple and and I don't want to pay for a serious problem that can't really be healed/fixed. Any advice or suggestions on what could be wrong would be greatly appreciated.

    Looks like a hardware problem - probably the motherboard. The only solution would be to take it to a repair center.

    I hope it's just a change in minor liquid that has damaged the keyboard, which should not be expensive to replace.

  • NB550D boots in black of the screen and cannot turn off even

    I had my NB550D for only less than a month. I've updated the memory to 2 GB and the Op to Home Premium system, but nothing else. It's on auto update on security issues, and I remained with the McAfee protection which was pre-installed (and paid for a year).

    All is well until a few days ago when you turn on, I just got black screen. Could hear the fan and disc well. Finally pressed the power button, nothing changed, has waited a bit, pressed again and it is off. When I pressed once again he came as usual. Used several times in the last two days and has been very well. Now today I get black screen again and can hear the fan. When subsequently, I pressed switch, I heard snoring disk but still black screen. Since then, tried pressing on/off switch from time to time but no change at all - can't turn off!

    Anyone has any suggestions please?

    Flingel

    I read in another forum that the answer must take the battery (having already taken the sector) so it will die and then press on and press and hold power for 30 to 60 seconds. I had nothing urgent to do let him die naturally when the battery is missed rather than take out the battery when it was on. Then, I held the power button for 60 seconds, plugged in and turned on. It starts very well now, but of course I don't know a) the question of whether it is because I held the power button in 60 seconds and b) on the question of if same thing will happen again, so if anyone has experience of this behavior, I would be grateful for comment.

    Thank you

    Flingel

  • Win 7 x 64: No. WWAN after the resumption of the mode standby and Bluetooth turned off

    Hey guys,.

    I had this problem for a few weeks 1-2, after the exit of the mode ensures my WWAN - the Sony Ericsson 3507g - modem is invisible and my Bluetooth is disabled.

    WWAN: the light is off, there is no switch on the screen Fn + F5 and power off/on with the hardware switch does nothing either, after a reboot, that everything is back to normal again until you go back to sleep. A few days ago he suddenly perfectly well but when I had to restart, the problem is back.

    Bluetooth: the adapter is always disabled after sleep and sometimes after a reboot, I can not find a model to know when this happens exactly... but I have since my WWAN modem is upward I can't help but wonder if it has the same cause...

    I already did a complete new installation of Windows 7 Home Premium x 64 today and I'm under the latest Vista drivers, because those who do not work with the Ericsson Wireless Manager Windows 7, they ran flawlessly for a few weeks, so that they should not be the problem...

    BOT of the above issues is dealbreakers for me because I'm using WWAN all the time and I use a Bluetooth mouse... then... Please help me ;-)

    Thank you in advance,

    Stefan

    I think I found the culprit: the last time I had this problem I didn't know what was the reason.

    After that the above post I got it works fine until recently it suddenly reappeared without having done me anything (Finally, I've done something, but I couldn't understand that).

    I installed a few games, but nothing about the wwan adapter.

    I also had the same problem to launch a vanilla Ubuntu 9.10 x 64.

    Finally it dawned on me that, just as the problem the first time, I had also installed Ubuntu. I think that something about the way that Ubuntu handles the umts modem makes it behave this way.

    This time (since I seen Ubuntu as the reason yet and I couldn't understand anything more), I opened the Thinkpad and looked for clues as to why this was happening - loose cables and all that - but nothing was wrong. I also disconnected the small backup battery for a few minutes to reset all the BIOS (except the part that is not volatile of course) - who probably had the same effect as turn off/turn on the modem I/O on-screen that solved the problem last time.

    Then, I rebooted, entered the BIOS, responsible for the default installation with F9 and it suited my needs. Since then he has worked flawlessly again...

    I'm not sure that Ubuntu bad, but it's the only logical explanation, and I think that's the reason why some mistreatment of the modem which required a "reset" on the base material, it is why a complete reinstallation of Windows did not do one thing...

    For now, I can just advise all users T500 WWAN to avoid Linux - Ubuntu, especially - at least until understand you what causes the strange behavior.

    Just my 50 ct other people with the same problem so some ideas on how to solve this problem.

    Stefan

Maybe you are looking for

  • Satellite A300D-17F runs slower than expected

    Satellite A300D-17 F Hi friends Since I bought this machine, I am not happy.There is a problem: he works so slow than other laptops and they have inferior properties.I don't understand. I almost have to break. I've done all the tips (uninstall tempro

  • Can't reinstall Windows Media Player - HELP!

    I use Windows Media Center edition 2004.  Lately my Windows Media Player has stopped working.  I get a message to re - install.  My WMC 2004 records are stored out of State, and I can't seem to them.  I tried to download Windows Media Player 11, but

  • Can't hit an IP address

    Hello, I'm a complete noob to both BlackBerry and Java.  At my first application today is writing. I'm trying to send information to an internal IP (internal to the company).  It works from the Simulator, but since the real BlackBerry, it says "Timed

  • B8320 and blackBerry Smartphones yahoo mail

    Hi all I have a bb 8320 and I want to read... send my e-mail address in my bb... How can I do? I expect your idea... Thank you

  • Why can I not select the entire Repeater object?

    I have a feeling that it is a simple question:I use a Mac Pro with 10.10.5 and AE 2015.0.1 Release.When I add a Repeater to a shape layer, I can not select the Group of repeated objects (via the bounding box) ('parent' and 'children').  It only allow