Satellite A60: error messages on blue screen appears all the time

Similar Questions

• Need to solve an Error Message 7B - blue screen of death/boot loop

  Hey community,.

  I need help. I'll try to find a way to resolve the error message on blue screen 7 b on a laptop HP Compaq 6710 b using XP, but he took trapped in a loop of boot BSOD and I can't access the command prompt to try to fix it. The situation is further complicated by the fact that the laptop has never been saved, and there is no XP discs for me to reinstall from.

  Wipe the drive and starting over is not a huge loss, but I need instructions on how to do that, without being able to use the last good config or the factory restore to XP disks.

  I'm sure that this information is on the internet somewhere, but the search engines sent me on a wild goose chase and I really hope I can solve this problem myself. I've only worked with Vista and need guidance on this.

  If anyone knows what to do, Please HELP! Good karma coming your way!

  Thank you

  Sryan2930

  Usually, I get this error when you try to transfer a hard drive from one pc to another, or after replacing a motherboard. The problem is probably the chipset/mass storage drivers.
  I had limited success by starting in safe mode and (re) install the drivers downloaded from the manufacturer's website.
  Here is the link to help you: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=3356622&taskId=135&prodTypeId=321957&prodSeriesId=3356620&lang=en&cc=us

  I hope I helped!
  Brian

• Character marking does not appear all the time in the outline Panel. How is it?

  Character marking does not appear all the time in the outline Panel again once I tagged them manually. How is it?

  Salvation of Jazz,

  Character marking does not appear all the time in the outline Panel again once I tagged them manually. How is it?

  Sorry for this negative experience. It is a known problem. Add your voice to the bug here: http://adobe.ly/ReportBug

  Thank you

  Kevin

• After you run the workflow in minor data, then the window "start" made its appearance all the time and don't can't stop it

  I installed the oracle11g and configured the SQL Developer minor and the data correctly, but when I run a workflow, the window 'departure' appears all the time, can't walk in the phase of runing and also can not stop. For now, the only thing I can do is to kill the program in the Windows operating system.

  Sometimes, when I kill the program and restart and restart run the workflow, it may be normal.

  So, I would like to know why and how to sovle it?

  Yes, there is a simple solution:

  "To ensure that Workflow tasks Data Miner is visible in your user interface".

  It is the window that displays the list of workflows that were run during the last day, and also all workflows running active and their completion percentage.

  If this window is visible, if it is not blocked from viewing by another tab, then you will avoid your problem.
  If you do not see the window tasks of Workflow Data Miner at all, then go to the menu: Tools-> Data Miner-> make it Visible.

  That should it appears in your user interface, then you should just make sure that it is fully visible.

  SQL Dev 4.0 final version will be released soon, it will be difficult, so this problem is no longer a problem.

  Thank you, Mark

• Satellite A200 - error message on Bule screen when I do something hard

  I have a laptop is the details below

  * Name model: Satellite A200 - 11 C *.
  * Model No.: PSAE0E-00X00KAR *.

  I installed Windows XP (Service Pack 2) on this subject. After installation, when I try to play video file or search for viruses or to work for a long time it displays a message on blue screen. The Message is as below:

  * A problem has been detected and windows has shut down to avoid damaging your computer
  * If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: *.

  * Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.*

  * Check with your hardware vendor for updates to the Bios. Disable the Bios memory options such as implementing caching or shading. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select Safe Mode.*

  * Technical information: *.

  * STOP: 0X0000008E (0XC0000005, 0X00000000, 0X8057064A, 0XA95718B8) *.

  Starting from physical memory dump *.
  * The physical memory on the drive of dumping: *.

  According to the message, I update the WOOD, but I still facing this problem?
  Waiting for your response.

  Russell

  E-mail: or * [email protected]

  Hello, Russell

  A few days ago, I have similar problem on my Satellite P200. After you install a third-party application, I got BSOD every time when this application loads. I tried anything possible. To start in safe mode and change the boot options, OS restore to an earlier time using System Restore tool. I also tried to remove application preinstalled in safe mode but nothing has helped.

  In the end, I installed OS using recovery DVDs.

  So, in my case, I was sure why this happens. What is with you? This happens if you use some applications? What player and antivirus do you use?
  The same happens when you try to use Microsoft's Disk Defragmenter?

• problem on Windows vista 32-bit: blue screen appears and the system reboots automatically when you work

  signature of the problem:

  problem event name: bluescreen

  OS version:6.0.6001.2.1.0.786.3

  Locale ID: 16393

  More information about the problem:

  BCCode:10000008e

  BCP1:C0000005

  BCP2:94B525C6

  BCP3:9BA92C14

  Product information

  Product number: NC646AA

  Series No.:CNX9030FZ9

  HP Pavilion Slimline s3560in desktop PC

  Hi mkm.

  Were there any hardware or software changes made at the time the blue screen appeared?

  I suggest to close the PC and remove all devices in addition to the screen, the keyboard and the mouse.

  If the computer works without a blue screen for a reasonable period of time, you can start to add them one at a time to see if a specific device that is causing the error back.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• conmputer crashes and blue screen appears and the computer restarts

  my computer guard crash blue screen appears and then the computer restarts, reinstalled windows xp and the problem persists

  If you reinstalled Windows, then you can be sure that it is hardware related.

  The three most likely culprits are the processor, graphics or RAM card. Unfortunately exactly identify the problem will always be tricky unless you have access to the spare parts that you can switch to turn.
  Neil
  www.nwarwick.co.UK

• Satellite Pro 4600: Win2k with SP4 - cooler run all the time

  Hello

  last week, I bought a used Toshiba Satellite Pro 4600 PIII, 1 GHz, 512 GB of Ram, WIFI and DVD burner. Great machine so far.

  After that I changed the FAT32 file system to NTFS and reinstalled Win2K/SP4 cooler runs all the time.

  TaskManager says that "THOT_KEY.exe" uses up 99% of the CPU power. Disabling this service reduces the power of the processor and the cooler was quite, BUT didn't really helped - lots of keys does not work.

  I ran a few utilities to disinfect as Kaspersky, NOD32 etc. to ensure that Ia´ve not taken some malware.
  Should I try a bios update or change some settings?

  Any ideas?

  Thanks for help

  Hello

  AFAIK the THOT_KEY.exe belongs to the Toshiba Hotkey utility that controls the various key functions.
  If you disable this service, you will not be able to use the FN keys more.
  I m not 100% sure why this service uses 99% of CPU performance, but perhaps that it s not completely compatible with the W2K service packs. Where did you download this utility? I found it on the page of Toshiba Europe!

  In my opinion, you should try to reinstall the system again. This is probably the key!

  Good luck

• I can't get into xp. a blue screen appears with the 0x0000007e error code

  I went to a blue screen.  Can I make the Windows/sysrem22/hal.dll file is missing or damaged.  I made a copy of the file on a CD from another computer, but I don't know how to load it on my desktop computer.  It doesn't work in either safe mode.  I hope that if I can get this file copied to my desktop, everything will be OK.  Help, please.  Jon

  Hi jon56b,
   
  Follow the steps listed in the article given below to resolve this issue:
  How to troubleshoot a Stop error 0x0000007E in Windows XP
   
  For error "hal.dll is missing or corrupt", you can consult the following article:
  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

• Blue screen appears on the Satellite A500-1DN - BCCode 116

  Hi all!

  I have a problem with the blue screen:

  BCCode: 116
  BCP1: FFFFFA8007B833E0
  BCP2: FFFFF88004C1DF90
  BCP3: FFFFFFFFC000009A
  BCP4: 0000000000000004
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  I have reistalled drivers but nothing :/
  What is the problem with my computer?

  Hi mate

  I have read a lot about the BSOD and BCCode 116.
  Some have said that this is the problem could be related to the graphics card driver
  Some others have said it could be a RAM problem

  I recommend you to remove/uninstall the graphics driver and use the graphics card driver Win 7 by default for testing purposes.

  You should also check if your BIOS is up to date.
  If this is not the case, do an update.

• tried to install a new copy of Windows XP Home. Everything is OK until the final phase, when the "blue-screen" appeared during the installation of the drivers.

  Installation of xp and blue screen of death

  Hello

  I recently formatted the partition boot and recovery of a laptop Medion2230, then merged the two partitions in a single NTFS partition.  Don't ask why, it's a long story.

  Then, tried to install a new copy of Windows XP Home.  Everything is OK until the final phase, when the "Blue Screen of death" appeared during the installation of the drivers. Restarted and installing XP as normal to repeat the first onboard staged and went to the "blue screen" at the same point as before.

  Using some diagnostic software, I reformatted the drive again, loaded XP set up and I had the same problem.

  Someone knows what to do?

  Thank you allionii123

  Now solved and pc with Windows XP home.

  Discovered a trick online, who said that at the beginning of XP installation, press F5, and this leads to a screen option - select 'standard pc' and continue with the installation of XP.

  (Again), formatted hard drive ran XP installation and followed above point.

  Worked the first time.

  Thank you very much for your advice.

  I think you can pressing F5 or F7...

  How to impose a layer of HAL during an upgrade or an installation of Windows XP

  Impose a HAL

  To prevent Windows XP to automatically determine the system HAL during the upgrade or installation of Windows XP, you can manually force in a system HAL. To impose an Abstraction Layer HAL during a upgrade or installation of Windows XP, follow these steps:

  1. During the phase in text mode of Setup, when you receive the message at the bottom of the screen, press F5:
     Press F6 if you need to install a third-party RAID or SCSI driver.

     Note If you press F7, the Standard PC HAL loads and the ACPI enforcement is bypassed.

  I would not need this except in the systems of many older and low end... :-(  After all, in the same article, for Standard PC they say: "the CPU can be a 386, 486, Pentium, Pentium II, or Pentium III '...

  Thanks for letting us know what you were doing.  Do you have all the necessary drivers after loading Windows XP?  I would not recommend using the default drivers for any hardware - always see what the manufacturer offers on their web page for each component of your system - card motherboard chipset, audio, video, network devices, etc.

• Desktop computer crashes frequently. Sometimes the blue screen appeared on the start and the unexpected shutdown of the system.

  It's the hijackthis log, you'd appreciate it could analyze and advise the problem of my office:

  [Deleted HijackThis report]

  Hello

  Try these troubleshooting blue screen techniques.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  information on errors such as STOP and information such as IRQL_NOT_LESS_OR_EQUAL codes or
  PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Gets the error on a blue screen: SYSTEM_SERVICE_EXCEPTION with the new computer to the gateway Windows 8.

  Former title: SYSTEM_SERVICE_EXCEPTION errors

  I bought a new gateway right after the beginning of the year. I bought it at walmart. It's a gateway with windows 8. I get error messages that e.g. SYSTEM_SERVICE_EXCEPTION. I'M NOT A PERSON TO COMPUTER SAVVY... Help me!!! These systems should come with a program that automatically corrects these problems. Especially when they are new... Please help or tell me how to solve this problem.

  AS

  These related to the driver screen Tourch xtouch.sys of eGalax_eMPIA integration technology.  I'd install the most recent driver available.

  Bugcheck 1000007E, {ffffffffc0000005, fffff80002ed2525, fffff880063d04c8, fffff880063cfd20}

  Probably caused by: xtouch.sys (xtouch + 4 d 86)

• Stop error message XP blue screen 0 x 0024

  Hi cybertek,.

  OK, I followed it all through, but my situation is slightly different. All I can get to is the start, regardless of menu if I use a bootable cd (I tried the method of PE Builder) or the original Windows disc. no safe mode or anything. I run Hard Drive Diagnostics in the Boot Device Menu, which gived me fail - Return code: 7 on my Samsung hard drive message. My only alternative to try and get my files on the hard drive from another PC or is there other alternatives? I also have a selection of ' boot of the score of "available in the menu boot device if it can be used somehow

  Not, in my opinion. I try and retrieve files as soon as possible as described previously. Chkdsk /f is infamous for the loss of data on the fault of readers (and sometimes OK ones) so I'm not messing around with it until you try to get your data. MS - MVP - Elephant Boy computers - don't panic!

• "Out of range" error message on my screen just before the record screen

  Having this little bug quite annoying, when I boot Windows 7, it starts to load then all of a sudden my monitor will go just black and an error "out of range" will pop up. I tried everythinggggg I know to solve this problem, connected in safe mode and updated all my graphics drivers and no still no chance. Currently in safe mode as we speak. I think it's something to do with my resolution, graphic card. I have a Nvidia 9600 GS.

  Please helpppppp

  I tried re - install the new drivers from Nvidia again this morning and suddenly seem to function very well, didn't really do something different yesterday. Just started in a lower resolution, and then downloaded the driver for Windows 7 (64 bit) of the Nvidia site.