Satellite A60: How to recover my photos from the XP HARD drive

Hello

Please someone help, I'm desperate...

Just tried to load WXP Pro Upgrade on Toshiba laptop (model PSA60E - 0300 217Y) of the publishing house. Before closing itself restarted. Now, Miss me the SYS/config file.

I know, I know... should have saved, but not... have a lot of photos of family, which my wife would kill me if I don't get back.

Got any ideas... can I reload MS Pro Home on a separate partition and then get the pictures in this way?

I tried a link Hot, you can see the My Docs, but 'access denied '.

Any help would be appreciated with gratitude
Thank you
Lewbop

Hello

If you use an original Windows CD, you can try using the repair console.
Simply start from the CD and during the installation of the procedure uses the R key to start the console.
Then you might be able to access the HARD disk, and you may be able to copy the missing files from CD to HARD disk. But it's embarrassing

Alternatively, you can try to reinstall the OS again the installation program allows you to create a partition and after installation, you can try to access the other partition where the pictures were stored...
So maybe it helps

Tags: Toshiba

Similar Questions

  • How would recover my photos from my old hard drive?

    Original title: Please help.
    How would recover my photos from my old hard drive? I have the old and the new hard drive in the Tower?

    Reach... Start / /My computer... and you must
    See the drive letters for the two hard drives.

    Just copy / paste... old record again.

  • Satellite L300 - how to reinstall Windows Vista on the replacement HARD drive

    Hello

    My HARD drive has stopped working on my PSLB9E. He started making whirring noises and wouldn't start. all tests show it does not. Now I guess I need a replacement for HARD drive and watched a TOSH MK2565GSX or other similar. Problem is I can't find my Windows key anywhere.

    It is can get the key to Toshiba/Microsoft giving them all my contact information or do I have to buty a new HARD drive and install a copy newly purchased Windows on? If Yes, then I'll put W7 on I guess.

    Thanks in advance for any help I receive!

    SB

    > Problem is that I can't find my Windows key anywhere.
    The preinstalled Windows operating system and the image that is placed on the Toshiba recovery disc were already activated and therefore the serial key is not necessary.
    If you don t have the recovery disc, so you can buy this drive here:
    http://backupmedia.Toshiba.EU/landing.aspx

    It s not expensive; 30 euros I guess.

  • I imported my photos from an external hard drive in Lightroom, edited my photos but then...? !

    Adobe,

    I imported my photos from an external hard drive in Lightroom, edited my photos and when I decided to export the originals had not been updated and deleted photos were not deleted. How I set up so that once I have import photos, edit and export they are then placed in their original case reviewed and updated?

    I managed to export photos to another file, but they were exported with an Adobe.xmp file. What is it and is it necessary?

    Thanks for your help!

    OK then so when you export edited LR images to tell the Office I do not need to use xmp files unless I want then to re - edit still say in Photoshop or another app?

    You don't need the files xmp during the passage of LR to Photoshop. Right click on the image or in the develop module, click Photo > edit in... According to what you have set in the preferences of the image then opens like FFT, JPEG or PSD - 8 bit / 16 bit - and the new TIFF file for example automatically will return to sitting next to the original RAW LR library. If you are exporting a RAW file edited to the desktop to JPG/TIFF then changes will be permanently stamped in the EXIF of the created files.

    Basically import my Raw files on the drive from Carmera card, then in LR. Edit in LR, finishing and export again say in the office. Keep or throw originals that I please...

    Yes, but why would you throw your originals? You can later return to the original and the re - change all over again new experiences learned etc..

    Can I see the modified pictures made in Photoshop in LR later?

    Yes, see first paragraph above. If you already have a file in LR, take it in Photoshop as a JPG/TIFF/PSD, it will be automatically reduced in LR. If you modify a file outside the LR and that is not already in the LR library, say by locating the RAW file in Explorer and then open it directly in ACR/Photoshop, then LR will have no idea what you did except in LR, you choose to import the image later. Remember though, this is one of the examples where you will need to configure save metadata in xmp (at bridge) so that when you import the edited outside the file RAW LR, LR will read the xmp file changes and save it in its own database.

  • I spilled coffee on my Macbook Air and does not illuminate.  How to transfer files from the external hard drive to backup my new Macbook Air?

    I spilled coffee on my Macbook Air and does not illuminate.  How to transfer files from the external hard drive to backup my new Macbook Air?

    If you had a Time Machine backup, you can use the Migration Wizard and connect your new Mac on the external drive which has the Time Machine backup: move your content to a new Mac - Apple Support

  • I bought a new computer, installed LR5 and import photos from a remote hard drive. Photos is finer, but all my Collections disappeared.  Is there a way to retrieve my Collections?

    I bought a new computer, installed LR5 and import photos from a remote hard drive. Photos is finer, but all my Collections disappeared.  Is there a way to retrieve my Collections?

    The Collections are stored in the LR catalog. If you had previously copied to your catalog on the other computer to the new all your collections would have been there.

    Now that you have the images on the new computer, 'IF', they were placed in the same folder structure (IE even the folder names and locations) then copy through the original catalogue "should" include your collections. If they are in the names of different folder or on a different drive letter or name of the player, then you might be able to use the feature to locate Images to find them.

  • How can I tell my catalog of lightroom that Ive moved my original files on a drive hard new, so it will apply all the settings for photos in the new hard drive

    How can I tell my catalog of lightroom that Ive moved my original files on a drive hard new, so it will apply all the settings for photos in the new hard drive

    Right-click on the folder name and choose the location of the update folder.

    See fig 8 to the attached link:

    http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

  • How can I copy music from an external hard drive in a folder of music on my Mac

    I used to have a Zune and all my music (about 5000 songs) was on my pc.  I copied all this music on a responsible and external hard drive to my iTunes library on my Mac, but I can't play unless I connect the external hard drive for Mac.  Whenever I try, I get the! and a message that the file is not found.

    Is it possible to download the songs from the external hard drive in a folder on my Mac so iTunes will be able to locate them?

    With the drive connected, open iTunes. Click the file menu and organize the library.

    (138107)

  • How to transfer files from the old hard drive to a disc new hard, old hard disk has been removed?

    I had a hard disk going bad. Installed a new hard drive and the need to transfer files from the old hard drive. I have an external enclosure for the old hard drive and can connect by usb port.

    The process is fairly simple once you put the old drive in the external box. You can use the usual methods of copy and paste in Windows Explorer. If you copy files, complete folders, you can take a look at RichCopy.

    http://TechNet.Microsoft.com/en-us/magazine/2009.04.UtilitySpotlight.aspx

    Tom Ferguson

  • I have my photos in the F drive an external drive. LR5 records my photos in the partitioned hard drive, D drive in my computer. Why I can't change the dafault in LR5 player?

    I have my photos in the F drive an external drive. LR5 records my photos in the partitioned hard drive, D drive in my computer. Why I can't change the dafault in LR5 player?

    When I 'import' a RAW/DNG file, the file gets automatically saved the item COPIED in my D drive under "My pictures" folder This info is available on the left panel. Instead, I want the file to go in my F drive which is my external hard drive.

    Lightroom help: explains how to import photos to a specific location. Scroll down to section 5, «Say Lightroom where to put your photos» Lightroom help | Import photos from a camera or card reader

  • How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?

    * Original title: windows 7 download

    I have a laptop dell M4400 with windows 7 pro OA. HARD drive crashed and I replaced with a new one. How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?

    It has probably comes with Windows 7 Professional 64 bit.

    You can download a copy of Windows 7 Professional using the following instructions (update of Microsoft recovery software supports downloads with the COA key):

    How to: What are my options for Windows 7 reinstall media?

    Make sure you scroll down and read the section:

    What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

    You can also use Windows 10 too as you have the right to it as a free upgrade:

    • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
    • Reboot several times, and then try again.
    • Disable the general USB peripherals (for example - smart card reader).
    • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
    • Perform a clean boot, restart, and then try again.
    • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
    • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
    • If this does not work, try using the. ISO file to upgrade if possible.
    • If you are connected to a domain, go to a local account.
    • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Unable to transfer data from the laptop hard drive external/pendrive.

    Dear Experts,

    Unable to transfer data from the laptop hard drive external/pendrive.

    Each time that tried to transfer meesage seems to the authorization of the administration.

    Kindly help me to solve the problem.

    Concerning

    Hello

    Follow these steps and check:

    To take ownership of a folder

    a. click on the USB key you want to learnand then click on Properties.

    b. click on the Security tab, click Advanced and then click on the tab owner.

    c. click on change. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    d. click on the name of the person you want to give to the property.

    e. If you want that person to be the owner of the files and subfolders in this folder, select the owner of subcontainers and objects replace check.

    f. click on OK.

  • starting from the second hard drive to a dv7 6199sl

    Hello.

    I noticed that my dv7-6199sl space for a second hard drive. There is the caddy but not on cable. Before you buy the cable

    (I don't know where yet, maybe HP spare parts site) I need to know if it is possible to boot from the second hard drive with my laptop model. Thanks in advance.

    Best

    John

    Hi John,.

    My best guess would be that the USB 3.0 ports require a driver to work correctly, try to boot from it (when the driver is not loaded) may not work - this isn't a definitive answer, but I do not know of bootable recovery media certainly has problems booting from a 3.0.

    Regarding the wire to the second HDD, I would suggest sending a request thereon to HP to the Email address in the form below.

    http://h20141.www2.HP.com/hpparts/contact_us.aspx?mscssid=1DF92190D24F41BD8DFAF888728F5EBA

    Kind regards

    DP - K

  • Cannot access the files from the internal hard drive that has been converted to drive external hard after the motherboard is dead

    I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

    I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

    Uhm... I think the issue here is a misunderstanding of what you watch.

    If you want to access your files from the old hard drive - you need to look in the right place.  If the old system was "Windows 7", "Documents and Settings" is the * wrong * place to look and "Users" would be the place to go.

    You * will * take ownership and change permissions on ALL (you want to propagate to all subfolders/files when do - to save time) in order to get them properly.

    New-->: Windows Vista/7 would have your files located in the directory 'Users' of the root of the drive - and then under your username.

    • \USERS\\Desktop\
    • \USERS\\Downloads\
    • \USERS\\Favorites\
    • \USERS\\Documents\
    • \USERS\\Music\
    • \USERS\\Pictures\
    • \USERS\\Videos\

    ... etc...

    Documents and settings to WIndows Vista/Windows 7 is a symbolic link and would lead to what you see if you tried to use it.

  • How to recover deleted photos from removable drive

    Recover deleted photos from removable drive

    I deleted inadvertently of photos of a chip of memory in my removable disk file.  How can I find them?

    I deleted inadvertently of photos of a chip of memory in my removable disk file.  How can I find them?

    ===================================
    The following freeware may be able to recover files
    of the memory card.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Recuva - file recovery
    http://www.Recuva.com/

    Using Recuva
    http://docs.Piriform.com/Recuva/using-Recuva

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

Maybe you are looking for

  • Satellite U400-144 - Vista cannot return

    Hello everyone I got this new Toshiba Satellite U400-144 (PSU40E), came with Vista home and worked really well until I decided to install Linux. Everything was going fine until I had my HARD drive partitions, when I deleted my 1.5 GB partition, which

  • Satellite Pro A200-1MA: blue screen STOP: 0x000000D1 Error

    Hello I have Toshiba Satellite Pro A200-1MA and Vista 32 bit. My problem is: when I work on my internet laptop notebook and use blue screen shows: http://img142.imageshack.us/my.php?image=dsc00238yh0.jpg and resets. Sometimes not regularly, but often

  • No Signal Message

    I have this type of screen, below, that I have linked to a Directv receiver with an HDMI cable.  I have the settings on HDMI.  I can't look at a pay-per-view HD movies, but I can see everything in HD.  Initially I thought that the problem was that I

  • My Word documents have all been restored to Wordpad.

    My hard drive failed and I recently had to recover/restore my documents of Carbonite.

  • Windows updates installed and now I can not start vista normally

    Hello, I have a problem starting my OS after windows updates to install. I have a laptop Dell Studio 1737 running Windows Vista SP1 x 64 I installed the windows updates and they are normally installed on the closed part (steps 1 and 2 of 3) but the c