Satellite A60 memory upgrade does not help

Hi, I have a Satellite A60-793 and I want to upgrade the memory by adding a 512 MB of memory currently installed.

I tried to install a 512 MB DDR PC2700 333 MHz SODIMM module, but the system does not boot to the top: it emits a long whistle blow and then stops automatically. If I remove the module, the system starts properly.

I have already updated my BIOS, I here something more, I can do to make it work?

You simply used bad, faulty or not fully considered supported modules.

Recommend to test it with another new

Tags: Toshiba

Similar Questions

  • Satellite A60-122: screen does not work - rest black

    Hello!!

    Can someone help me please on a screen problem? I have a Toshiba Satellite A60-122 and when I turn it on the screen does not work. It remains black as if the power of the laptop was turned off. I tried to connect the laptop to an external monitor, but it still does not work. I have no more ideas of what can do to make it work.

    I already told to format the pc with the cd of restoration but without an image, it is impossible to do anything...
    Thank you

    Isabel

    Hello Isabel

    I'm not an expert, but if there is no image on LCD internal display and the external monitor, I assume that there is a problem with the graphics card. I think you should contact the customer Service of your country partner and let check the device.

    I also hope that the warranty is still valid and if something needs to be replaced they will do it for free.

    Bye and let us know if you have more information about it.

  • Satellite A60-174: USB does not work

    Hello I do not know if this message correctly this time... and I first apologise for my bad English speaking please.

    I just bought a second hand Satellite A60-174 (without installation CD). It has been completely formatted and installed again before the sale, but bad (some drivers were missing).

    I now have a problem of USB ports. Do not connect devices such as a mouse or even a 'simple' external HARD drive, but to connect to another external HARD, a multimedia disc: TVIX 3000 and a tablet/hub USB (powered by USB labtop) ventilation.
    I tried an update for the drivers of USB ports, whenever I am asked to give a CD, no update via windows update (when I configured correctly update windows in system properties).

    I see in the control panel:
    -PCI to USB host controller standard scope
    -OpenHCD... two USB host controller standard

    But after executing "Myconfig.com" gives the results
    -ATI techn... Inc.: OHCI USB Controller #1 and #2
    -ATI Tech... Inc.: EHCI USB controller
    -ATI Tech... Inc.: SMBus

    Why this difference?

    Don't you think that it is the motherboard driver? If so is it possible to update it without having to format and reinstall everything?

    In the list of drivers for the A60 (PSA60E) it is controller EHCI driver, or driver of motherboard.

    Thanks a lot for the other answers youy

    PS Some useful information:
    Operating system XP Pro SP3
    BIOS version 1.70
    SMBios version 2.3 (?)
    Chipset North bridge ATI Radeon 7000IGP
    Bridge South ATI IXP 200

    Post edited by: anne34

    Hello!

    Do you have the yellow marks in Device Manager?

    On the Toshiba site is the order of installation, drivers must be installed in step by step. I think that the display driver contains the driver for the motherboard. If you need to install these drivers.

    And Yes, the information in the Device Manager and myconfig.com are the same.

    I think that there are one or more missing driver. To verify the installation if instructions you have installed all the drivers.

    Good bye

  • Satellite A60-106 keyboard does not

    I have the laptop above that I took apart to clean the fans. I had to remove the keyboard to do this, and when I put back it together that happened something strange. The first time I started it only half the keyboard worked. I took apart again to check the water and he was sitting and implemented correctly. When I turned this back, reworked keys.
    However, I have noticed when it lights up, caps lock light flashes as it should. However, I can't enter the BIOS or windows boot menu or type nothing when the operating system is loaded.
    I bought a new keyboard now and it does exactly the same thing is not that.
    The USB keyboard works well and I noticed that when I put the caps lock on the caps lock on the keyboard of the laptop also comes on but the keyboard still does not work.
    I downloaded the latest toshiba Web site bios but when I try to start it (this is a windows-based program) it says 'UpdatePlatform failed '. It is the correct bios found here: http://support.toshiba-tro.de/tools/eula/info_eng2.asp
    Here, any advice would be appreciated.

    Hi dude

    > I have the laptop above that I took apart to clean the fans. I had to remove the keyboard to do this, and when I put back it together that happened something strange.

    Have you deleted parts more than only the keyboard to clean the cooling module?
    I guess you did!
    What to tell my friend to me it looks like a hardware problem and it seems that you have done something wrong during disassembly, but portable.

    I put t thing that could update the BIOS helps you because it doesn't look like a BIOS problem. Why? Because it looks like the laptop successfully ran before the opening!

    In my opinion, that you should contact a mobile technician as a common user like you who have no experience will not be able to remedy!
    The ASP can help you. Guys have more experience and use special tools to locate the failure!

    Good luck

  • Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

    Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

    Hello

    Check with Toshiba support, online documentation and drivers (update or reinstall), and
    ask in their forums.

    Toshiba - Forums
    http://laptopforums.Toshiba.com/

    Toshiba - Contacts
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

    Toshiba - drivers - access your model
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

    Toshiba - Support
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    ========================================

    How to activate Audio devices hidden in Vista and Windows 7
    http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

    Connect one microphone, music player or other audio device to your computer (you want to be sure
    the mic input is enabled)
    http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

    -----------------------------------------------------------------------------------------------------------------

    Pilots may also need to be updated:

    Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
    Audio (this is an example and you can have an other name/maker).

    Make sure you write down the description and model double click top - tab drivers - write version. Now
    Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
    CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

    If your driver shows 06 you have the default windows and part of the question.

    Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
    Put them - right click on Reboot - RUN AS ADMIN -.

    Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
    and then install the latest version. Restart and check after each test, not
    rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
    installed shows upward on the tab of the driver.

    Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    ---------------------------------------------------------

    After the updated driver.

    Click with the right button on the speaker near clock - recorders - right click in the box - check see the
    Disconnected devices and show disabled devices - check your micro - highlight
    then on lower right properties. Make sure that the appropriate injector is selected and check
    other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change
    .

    Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
    is the RealTek Audio Manager, yours can be quite different name if you have one.

    How to activate Audio devices hidden in Vista
    http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

    Connect one microphone, music player or other audio device to your computer
    http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

    Problems with sound and audio or no sound - a Mr Fixit
    http://support.Microsoft.com/GP/NO_SOUND

    I hope this helps.

  • 9.3.5 on iPhone 5 camera upgrade does not

    I just did the upgrade to IOS 9.3.5 and now my camera is freezing on the Photo and place but time-lapse and video works perfectly. Is this something to do with the upgrade? I did a reset, but this does not solve the problem.

    Try to hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears. You won't lose anything.

    If that doesn't help, try a system restore. First save your device via iTunes. Also import your photos on your computer and copy all the data if possible. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

    https://support.Apple.com/en-us/HT201252

    If the steps above do not help, you may need to test in an Apple store.

  • Satellite L750 - 17 p does not load Windows

    Hi all... I have a Toshiba Satellite L750 - 17 p, since a few days now, when I turn on the PC after the toshiba logo I get the loading screen and the window ms back with the inscription: system32 / drvload.exe
    MS-DOS screen remains empty and the computer doesn't load... could you help me?

    Are able to repair the system using the Windows own repair options?
    I guess you are using Win 7 because this system has been pre-installed by Toshiba.
    Switch on and press F8. Here, you choose the first option called fix my computer.
    Now you should be able to choose between several options. I think you should try the first option that allows you to automatically repair the system.

    If this option does not help, try to set the system on the last good configuration/status running

  • Satellite C - DVD tray does not open properly

    My Satellite C DVD tray does not open properly. It opens only after several times.

    Can someone help to solve the problem?

    Thank you very much
    Dalug22

    Please check this thread:
    https://Forum.Toshiba.EU/showthread.php?82344

    The ODD (optical disc) contains a small ejection hole. You can insert an object like a paper clip to open the ODD plateau

  • Satellite A300 - easy (key) does not not after SP2 update

    Satellite A300 easy (key) does not...
    I have recently upgraded my Vista SP1 to SP2 (do not know if this is the problem, but I'm pretty sure that's not)

    Yesterday, I discovered that my easy keys no longer work. Lights are out, when I press the keys, the light comes on and goes off again as they do normally, but no reaction on my screen (can not turn on any light without restarting my computer and select turned ON manually cannot transform media of windows opened by the touch and play the key do not work).

    Is it supposed to be a driver or something for this?

    Sorry for the bad English...

    Hello!

    A few days ago, I had the same problem on my laptop Qosmio. Lighting keys stopped working after installing some updates and the 3rd application programs the keys no longer works and also the lighting.
    At the end of the story, I had to reinstall Windows :(

    In any case, now, you should try to reinstall the Toshiba value added Package. He controls these buttons that you want to say and you can find it on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Before installing you need to remove the old version first, restart the computer, clean up your Windows with CCleaner for example, restart again and then install the new VAP.

    Good bye

  • Link to BIOS 1.50 for Satellite C660D-13 q does not (404 error)

    Hello

    Link to 1.50 BIOS for Toshiba Satellite C660D-13 q does not (error 404) - file not found.
    How can I get this file after all?

    Who should I contact for this?
    Any help email address?

    Thank you

    You are right. the link says 404 error.
    To be honest, it is not for the first time something like this happens, but after a few days, everything was OK again.

    Try to download this update in a few days. I hope it will be fixed.

    By the way: you have a few problems installing the BIOS update should be made as soon as POSSIBLE?

  • Satellite L300 (PSLB8C-0H901X) does not work

    My laptop Toshiba Satellite L300 PSLB8C-0H901X, does not work, no power, no MESSAGE, nothing, lamp power and charge Get when pluged into anything else, any known issues? All the fixes, thank you in advance for your help.

    Of course, your laptop is completely dead. In such situation, there is no magic solution and I m afraid that you need professional help. If there is absolutely no reaction is maybe defective electronic power supply and the motherboard must be exchanged.

    As you know this is part more expensive so you need to check if this is the solution for you.
    Call, explain the situation and let it check your laptop.

  • Satellite A205: Vista & BIOS does not recognize the CD/DVD drive

    After a crash of the sudden family Vista system premium on a Toshiba Satellite A205 the system does not recognize the DVD CD - RW drive. Neither in Explorer, Device Manager, nor BIOS.

    Laptop is only a few months old.
    Have you tried the Toshiba check system - it ignores DVD disk check.
    Tried Windows Update - does not help.
    Tried registry fix - does not help.

    Cannot use the CD to reinstall all drivers - because it is not recognized.
    The DVD drive LED is on. If the disk looks ok physically.

    Does anyone have an idea what to do?

    Very strange what s
    Try this:

    Access the BIOS and set the default settings and save the changes.
    If it doesn't help then I put t see any other possibilities for contact ASP in your country for a CD/DVD drive control and possibly a replacement

    You said that the notebook is only several months old so I assume that the warranty is still valid and that's why everything has to be done for free

    Good luck my friend

  • My creative application cloud told me to update my Bridge of Photoshop and Lightroom. All updates failed. All attempts have failed. I got error 49, but again does not help. What now?

    My creative application cloud told me to update my Bridge of Photoshop and Lightroom. All updates failed. All attempts have failed. I got error 49, but again does not help. What now?

    (Other relevant data)

    I had some problems with Photoshop since the last update. Whenever I close, I get a pop up that tells me that the program has failed and is looking for a solution. Sometimes, it closes with the same pop up, when I completed a heavy task memory. I use Nik and it's at the end of certain operations of Nik she does this sometimes (rarely). I need to re - register every month because otherwise, he thinks I work with a trial version.

    Hello

    Open the Temp folder.

    Clear the contents of the Temp folder.

    Disable your Antivirus and firewall computer for awhile.

    Launch Desktop CC and try to download Apps.

    You can also consult the document below.

    Error downloading creative cloud applications

  • Oracle not available, shared memory realm does not exist

    Hello

    I have problem during the installation of XE on Windows 2003 R2 SP 2 Enterprise edition. I have uninstall oracle xe and still the same result. Finally, I uninstall the windows and start all over again, surprisingly the always the same result. FYI, we have normally no problem during installation because it is part of our system, we sell to our customers who require Oracle xe. It is the first time we have seen this issue.

    ORA-01034: Oracle not available
    ORA-27101: shared memory realm does not exist.

    Oracle XE and Auditor services is started in windows services.

    If we try to start the message occurred.

    SQL > connect sysdba virtue

    Connect to an instance is idle.
    SQL > startup
    ORA-44412: setting memory XE edition invalid or unspecified
    SQL >

    I can send you the journal oracle_xe, ora init and OpsBuildAll.log to create the database.

    When compared with the installation of work, we have seen that the size of the oraclexe folder is less, it's just 233 MB while the work is beyond 1 GB. After investigation, discovered that the .dbf files is not available in the oradata folder, I tried to copy the files from one operation but the problem remains the same, no doubt there are a lot of missing more files.


    Appreciate your help on this.

    Thank you

    Agus

    It's a shame I don't remember that one. The error message (and solution) was a similar here: {: identifier of the thread = 2322695}, with a real solution from here: {message identifier: = 10039007}
    (Just to keep an eye on this kind of mistake and to link the case...)

    I'm glad to hear that you solved the issue now, but I'm still a bit puzzled how this could happen. Possibly management of memory to the point 10.2 XE does not get what he expected on systems with Hyper-Threading or several used CPU sockets, maybe is the fact, it cannot apply/monitor limitations as expected. Still the error message is a bit misleading.
    It would be interesting to know if 11.2 XE gets along on this platform. Maybe you have time to give it a try someday? I would recommend to use 11.2 XE for a new installation anyway... ;)
    It is likely to work because no one reported an error like that with 11.2 XE and there are a few positions, mainly on licensing issues, which indicate 11.2 would also go on HT and dual socket machines, but it is possible that they still had something different on their machines.

    -Udo

    P.S.:
    @Fredrik: If our messages overlap on this reference... ;)
    @Agus: If you think that your problem has been resolved, please mark this thread as answered and all useful/correct answer accordingly, for other users looking for a similar question will be able to easily spot the positions in question.
    Thank you!

    Published by: Udo on 23.03.2012 09:15

  • An another ORA-27101: shared memory realm does not wire. :|

    Guy before you start cursing me to 'Find the fucking form' 'google before posting.

    I did all of this for the last week 1. I'm just not able to find a solution to this problem

    What all I did was searching on the forums

    I checked the file listener. No trailing slash is there, I checked the SID. It has been set correctly. Home is also set correctly. TNSNAMES.ora file is correct. All values of apt. SQLNET.ora is checked. No problem with that.

    I erased the eventviewer (Yes one of the listed forums that eventviewer being full can also cause this error), I have enough disk space.

    Oracle service starts and the listener service starts without any problem. But if I try to connect I get this error.

    I tried to restart the services, I tried to restart the machine itself.

    C:\Documents and Settings\nom > set oracle_sid = qa01

    C:\Documents and Settings\nom > sqlplus sys/oracle as a sysdba

    SQL * more: release 10.2.0.3.0 - Production on Sun Aug 15 21:40:09 2010

    Copyright (c) 1982, 2006, Oracle. All rights reserved.

    Connect to an instance is idle.



    C:\Documents and Settings\nom > sqlplus sys/oracle as a sysdba

    SQL * more: release 10.2.0.3.0 - Production on Sun Aug 15 22:29:14 2010

    Copyright (c) 1982, 2006, Oracle. All rights reserved.

    Connect to an instance is idle.

    SQL > select file #, name from v$ datafile;
    Select file #, name from v$ datafile
    *
    ERROR on line 1:
    ORA-01034: ORACLE not available



    When I connect

    C:\Documents and Settings\nom > sqlplus system / < password > @qa01

    SQL * more: release 10.2.0.3.0 - Production on Sun Aug 15 21:01:49 2010

    Copyright (c) 1982, 2006, Oracle. All rights reserved.

    ERROR:
    ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist



    I tried running the command start nolog. It is said of database successfully mounted, still I'm not able to connexiona my instance. immediate stop does not work. He said TNS ADAPTER error or something.

    I once faced a similar problem and it was related to a DBF file being deleted and oracle was not able to find it. After the issuance of orders drop (alter drop offline database datafile 13 ;) I was able to start the database. Any help will be greatly appreciated.

    Thank you
    Shakur

    PS - I'm running a virtual machine with Windows 2003 32 bit machine

    Hello

    Looking the alerts log, it seems that this data file "INFORM_01.DBF" is not available in 'E:\ORADATA\QA01 '. Come back with goodness and hopefully you're cold backup of the database or at least the application schema export dump.

    Kind regards
    Anand

Maybe you are looking for