Satellite A60: Not possible to install hotkeys & power saver - code: 0x7E

Similar Questions

• Satellite P300D - 15 c - cannot install Toshiba Power Saver

  TOSHIBA Power Saver for W - XP cannot be installed.
  Installation error messages: fatal error, abandoned facility. 0x2
  Try to remove the part which is installed (visible in Add/Remove Programs), gives the same error message 0 x 2.

  Under programs > Toshiba only the help file 'Power Saver Help' is visible, but is not accessible.

  Can someone help me?

  Pieter

  Hi mate

  Drivers and tools must be installed in the correct order!
  I googled a bit and found this order of installation for this laptop model:

  Windows XP Service Pack3 (RTM)
  2 KB898458 KB898458
  3 KB936181 KB936181
  4 KB936782 KB936782
  5 Sun Java 2 Runtime Environment V1.6.0_06
  AMD 6 RS780M/MC, RX781 + SB700 Chipset Module V5.10.1008.8
  7 AHCI Driver V3.1.1540.61
  Processor AMD 8 V1.3.2.0 driver
  9 AMD video driver V8.479 built-in
  or
  9 AMD M82 / M86 video driver V8.477
  10 Conexant CX20561 Audio Driver V3.47.1.50
  11 Marvell 8040/8072 LAN Driver V10.57.4.3
  12 Synaptics Touch Pad Driver V10.1.7.0
  or
  12 ALPS Touch Pad Driver V6.0.305.11
  13 V7.73.0.0 Conexant Modem driver

  Reader of cards 15 O2 OZ129 V3.23
  16 modem region Select utility V2.2.3.2 (RST223MAC02)
  17 driver Atheros Wireless LAN Driver V7.6.0.200.0.x32_wCAT
  18 Atheros Client Utility V7.0.1.98.0.x32_wCAT

  20 V6.2.238.0214 Chicony camera software
  21 Bluetooth Stack for Windows by Toshiba V6.10.07T.2
  22 Bluetooth Monitor V4.02 (Build20080122)
  23 TOSHIBA SD Memory utilities V1.8.1.3
  AES1610 24 Authentec Fingerprint Utility V7.10.1.0/V2.1.11.0
  TOSHIBA ConfigFree V5.90.09 25
  26 TOSHIBA Assist V1.03.00upd4
  27 CD/DVD Drive Acoustic Silencer V1.00.008
  PC Diagnostic TOSHIBA 28 V3.2.8 tool
  29 TOSHIBA Touch ED V3.0.3.0
  30 TOSHIBA Hotkey Utility V3.0.3.0
  V3.0.3.0 utility TOSHIBA 31
  TOSHIBA 32 Control Utility V3.0.3.0
  33 Toshiba Power Saver V7.04.02.Q
  34 Toshiba zooming Utility (smooth view) V2.0.0.24c
  35 GST Init V1.0.4.1

  * Note *: not all listed drivers or tools are released on the Toshiba driver page
  So install only those drivers and tools that are available on the page of the Toshiba driver and follow the order listed above.

• Satellite A60 - treatment control of speed under Power Saver

  Hello!

  After I had removed the WinXP preinstalled and installed a normal Windows XP - SP1, I can't control my processor speed more. This option became simply not available in the energy saving program.
  Also, change the processing speed in the BIOS for 'always low' has no effect on it. It seems that Windows simply ignores this setting.

  I tried different third party programs to control the speed, but it did not help.

  Any idea?

  Hi lop
  It's very strange. I really don't understand how this can happen. The recovery CD with Windows XP Home SP1 edition home. It must be the same. Have you installed the right tool electric saver for this unit (TOSHIBA Power Saver V7.03.02.I)? The order of installation is also very important and you can find the file txt on CD Utility & Tools.
  Try reinstalling the energy savings. Can you please tell me why you want to put down? Power of sawing?

• Not possible to eliminate the Power Saver Utility of the OS

  There are energy saving TOSHIBA began to act up. So I decided I want to reinstall. I downloaded the utility and power of the toshiba download page saver driver. I tried to uninstall the TOSHIBA Power Saver by using Add/Remove Programs, but I get an error:

  Error 1316: A network error has occurred trying to read the file C:\WINDOWS\Installer\TOSHIBA Power Saver.msi

  I went to see if this file still exists, and it does not work.
  Currently, the utility is only half uninstalled, I can't use, but its still in my Add/Remove Programs list.
  Could someone tell me what I need to do to properly uninstall the utility?

  Thank you
  AZ

  Hello

  First of all, if you want to install energy-saving if the driver must be installed in the first step, then the standby electricity utility.

  If you cannot remove the standby electricity utility form OS so I guess that there is something wrong in the registry or / and some files are missing to begin the removal process.
  In this case, there are not many possibilities.
  You can manually remove it form the HARD drive and then remove the power saver entries in the registry.
  You can use the regedit command to start recording.
  Here, you can use the search option for research inputs to power saver.

  But I can't justify it will help again to install energy-saving.

• Satellite A11-998: fatal error Power Saver - code: 0x7e

  I recently bought a Toshiba Satellite A11-998. I upgraded the operating system of Windows XP MCE to Windows XP Professional. As some of the drivers were not picked up, I was download the latest drivers from the Toshiba site, but when I install the Toshiba Power Saver, utility, I get the following error;

  "A fatal error has occurred. The program will end. "Code: 0x7e.

  The only option I is 'OK '. When I start the machine and Windows journal, I was invited with the same message, even, when I try and uninstall the energy saver utility. Is it possible to completely remove the utility, or can anyone suggest how to solve the problem. Any suggestions much appreciated.

  See you soon

  It seems that there is no general solution for this problem.
  I found some comments on the similar problem, and it seems that the Toshiba recovery CD installation will eliminate the error message.

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=11238&MessageID=40588
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9573&MessageID=33773

  But how did you install the entire operating system? Did you follow the installation instructions on the page of the Toshiba driver?
  The order is very important and necessary if you want to install the Toshiba applications on your operating system.
  I also discovered that the laptop uses Power saver power saver utility and driver.
  I think you need to first install the driver and utility.

  But everything should be described in the installation instructions

• It is not possible to install Adobe Flash player 11.1

  It is not possible to install Adobe Flash player in the browser, it works without problem?

  There are 2 versions of Adobe Flash:

  • an ActiveX version for IE only
  • a plug-in version for most of the other browsers including Firefox
  • On a Windows system, you must always update both individually.

  You have the Plugin version 9.0.45 installed Firefox - a very old version. In modules > Plugins you should see "Shockwave Flash (version)".

  Make sure that your Plugins often-> http://www.mozilla.org/en-US/plugincheck/

  • We know only the Plugins the more popular/used by this page
  • page detects only installed, activated Plugins

  Install or update Adobe Flash

  1. With Firefox, click on the following link and SAVE the download on your desktop, so you can find it later. Clear all of the items on this page that you do not want to download (i.e., "McAfee Security Scan Plus"):
     • http://get.Adobe.com/flashplayer
  2. When the download is complete, close Firefox (file > button OR exit Firefox > exit)
  3. Click or double-click the file that you just saved on your desktop
     • In the install window that appears, select the check box to the left of "I read and...» "to place a check mark in the box of
     • The button 'Install' in the lower right corner is now highlighted, click it.
     • Installation is quick.
  4. Launch Firefox and test your installation here: https://www.adobe.com/software/flash/about/
  5. To the update/install the ActiveX for IE onlyversion, repeat the process, but use IE to go to the site above.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plug-in for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Satellite M70-151 - not possible to install new HDD

  Hello

  I have a problem with my Satellite M70-151. bunch of old hard drive (100 GB Hitachi) reached the Windows XP screen then just ends with a blue screen a turn off laptop, immediately. I had to restore my data with an application file-rescue of another PC. It was not possible to start from old hard drive yet.

  Then I bought a Western Digital SATA II 250 GB hard drive that put my Windows XP CD in DVD player installed and tried to start. The laptop turns off as soon as the laptop computer tried to access the HARD disk.
  Thought, it was question of SATA II disk and tried a Samsung 160 GB Sata I - same result.

  BIOS recognizes the correct drives.

  If I try to boot from old hard drive, it shows the issue I mentioned first, but as before it reaches the Windows XP Boot screen before moving on to the blue screen before turning off the laptop. So start goes further than the boot with new hard drives

  The Windows XP CD I used is not the restore CD that came with the laptop, but a normal license.

  The heat is not a problem, I cleaned the CPU fan there is enough space to breathe the cold air mobile, the temperature is ok.

  * My questions are: *.

  Is there any special application running on laptops satellite, like special software of Toshiba, perhaps Backup, should I be aware of?
  What I need to preformat the hard drive, Toshiba-Hardware will recognize the hard drive?

  It would be great to get help on this issue, because I'm out of ideas. Thanks in advance!

  André

  Hello Andrew

  This behavior is very strange. I have some old Satellite M70-159 with 100 GB HARD drive. I also tested how it will work with a 250 GB HARD drive and all is well.
  On two drives, I have installed WXP using the Toshiba recovery image.

  I answer your two questions No. to install Windows XP Home edition on this model of laptop you don't need some special Toshiba application or a piece of software.
  HDD should be recognized correctly by the BIOS and the Windows XP Home edition installation procedure should work well.
  What you can try is to set the BIOS to the default settings and try again.

  The strange thing for me is that judgment. The blue screen tells me that there may be some serious hardware problem, the HARD drive controller might be. It's really not easy to say with certainty what can be the problem.

• Satellite A30 - not able to install Power Saver on Windows XP Professional

  Hello, I need help, I had to install win xp prof on my a30, but I can not install the intelligence tool that I downloaded from this page. the tool tells me "You can not install this version of Power Saver on your system", but it has the latest version for windows xp on this page of toshiba. is the family sleep only for windows xp tool?

  Hello

  No, the saver powers should also works and run with Win XP Pro.
  There is no difference. All the tools that work on XP Home are also compatible with Win XP Pro.

  Did you receive the tools and Utilities CD? You can use this version to

• Satellite C660 - not able to install the driver for chipset WXP

  Come on!

  I installed WIN XP on my Toshiba Satellite C660 laptop and downloaded the drivers for windows XP, but I'm not able to install the chipset and display drivers.

  It says "this computer does not meet the minimum requirment for the installation of this software.
  Setup will now close '.

  Can you help me, please?

  Hello

  What C660 (C660-xxx) do you have?
  Have you installed Windows XP Home Integrated SP2 or SP3?

• Satellite C855D - not possible to enable virtualization in the BIOS

  I just bought a portable Satellite C855D with a processor AMD A8 - 4500M. The processor supports AMD - V, but it is disabled in the bios. It seems that Toshiba has removed this option from bios InsydeH20 Setup and it is not possible to activate this feature.

  There is no work around for this problem? I bought this laptop for my studies and it will be returned if it is not possible to run 64-bit virtualization.

  I doubt that you will be able to allow this future if it is not taken in charge by the BIOS

  However, you can always try to update the BIOS, where an update would be available

• Satellite P200: Problem installing XP Power Saver - SOLUTION

  Hello

  For people who were having trouble installing the utility of Toshiba Power Saver on Windows XP, I found a solution for you.

  Download the XP drivers for model Satellite P300 energy saving and you will absolutely find, just make sure you have the driver for the installed first P200 energy saver!

  I hope this helps you solve your problems

  Yours,
  Neo-tech

  That s a nice info.
  Thanks for sharing this with us.

  Good bye

• I can't install Toshiba Power Saver on my Satellite M45-S169 - Code: Ox7E

  I can't install/reinstall/remove/run Toshiba sleep on my Satellite M45-S169. After I reinstalled the system (now it is Windows XP Professional SP2). When I tried to open Power saver via Control Panel I saw denied it, and every time that I reboot the system, I get the error message:

  Toshiba power save
  A fatal error has occurred. The program will end.
  Code: Ox7E

  I can't delete or reinstall energy saver. Can I try to run saving for Windows XP SP2 applies for other laptop models? I couldn't find one for my model. That one will fit? Any other solutions / advice to the problem?

  Help, please

  Thank you very much, Oksana

  Hello

  First of all, you knew that this laptop was designed for the U.S. market and all the drivers, tools or any other Toshiba utility should be used on the Toshiba site we.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  Please make sure that you have already installed Toshiba ACPI common Modules before as you continue to any other Toshiba Software installation.

  An important tip; the Toshiba power saver profile must be selected in the Windows power options! Don t forget!

• TC 7.3.1 not possible to install on endpoints

  Hello

  We ran into Bug CSCur63326 presentation question on / off with TC and MCU codec.

  According to the Bug, the problem came in TC7.2.1 and must be fixed in TC 7.3.1 which is downloadable since Tuesday.

  So, I downloaded the SW for a variety of endpoints that we have.

  Unfortunately, it is not possible to upgrade to this version, any version prior to, or what type.

  Once the SW is downloaded and the installation starts, it does not directly after:

  'Check the signature on the firmware image' begins. According to the "installimage.log" of the codec it says failure of the verification of signatures! »

  When I tried the same thing with my EX90, connected on the public internet behind a DSL router, verifying signature takes forever, but the update is successful.

  Someone at - it an idea?

  Best regards, hans

  Hi, check again you get the download software appropriate for your codecs. Even if they all run TC software, there are different flavors, so be sure that corresponds to the ID software (such as s52000).

• How can I install Toshiba Power Saver on my newly installed Vista?

  So I have a PC laptop Toshiba A100 and I just upgraded the operating system factory (XP), Windows Vista default. Anyone know if it is possible to adjust the brightness of the screen in Vista without Toshiba Power Saver? Or y at - there a way to download Power Saver from Toshiba for Vista? Thanks for any help!

  Hello

  In Vista, there is no Toshiba Power Saver as under WXP and now many parameters have been taken on Vista power settings. With other words Toshiba Power Saver is not like in the version of Windows XP Home edition. The Toshiba Power Saver is now part of the package of added value.

  When this package is installed you can set the screen brightness as before using FN + F6, F7 key combination.

• Receive the error message when you try to install Toshiba Power Saver

  Toshiba power saver recently stopped working - I deleted and it redownloaded this site, now whenever I try to start the installation, I get a message "Cannot be the computer id" and stops the installation.

  For the first time post here so if I'm on the wrong forum or you need nothing else apologies in advance.

  Hello

  where you´ve have downloaded the powersaver? Maybe you downloaded a bad for your machine. It s absolutely important to download EXACTLY this software that fits your type of machine.
  When you download stuff on toshiba Web sites you will have to keep an eye on the version on your machine (for example the Satellite A100 - 552-> download software of type '552' of the Satellite A100 series).

  Sometimes, this solves a lot of mistakes and clarify some not very nice situations.
  Please, more details on your problem. :)

  Welcome them