Satellite A60 summary failure and press a key to continue

Similar Questions

• Equium A60 - failure of resume and press a key to continue

  Hello
  I have an Equium A60 which is coming up with 'failed to resume and Press any key to continue' when I turn it on. This FAILED after the battery is and it stop. By pressing a button any does nothing.

  I can't enter the BIOS if I'm fast until the message arrives, and it is set to the Startup Mode, will not resume. I tried to reset the default settings, removal of hard drives and boot from other devices, but it does not seem to happen, so I canoe perform a BIOS update either.
  Ive had the machine goes in search of a battery that I can remove or I can press a reset button, but I couldn't find anything.

  I can do, or is it totally dead for good?

  Please help me! Its a laptop second hand, but I have had it a week! ;)

  Simon

  Hello

  Could you please check if the HARD drive has been recognized in the BIOS!
  If she recognized the war you should try to install a new OS.
  Boot from the CD by pressing the C key immediately after starting the laptop.

  You can also try this:
  Simply remove the cache connector unplugged the HARD drive HARD drive and plug it in again, turn on the laptop.
  If the same message appears, simply press the SPACEBAR and check if the operating system boots from the HARD drive.

• Why do I get a message saying "no disc not detected - start insert an and press any key to continue", but none of the keys work.

  When I finished installing, partitioning, and all other actions prompted for installing windows 7 with boot camp, my mac restarted all of a sudden without promote me. My 32 gb SanDisk Cruzer Blade was hooked up to an external USB hub. My screen came up with a console that says something in the sense of ' no disc of starting (or reader) detected - insert and press a key to continue. " I then plugged my FlashDrive directly in the USB interface on my Mac. Then I pushed every button on my keyboard, but nothing happened. I then force reset my Mac and retried, but alas, it didn't work. My computer is stuck here and will not respond to anything else. Any help is appreciated.

  Please, please, please! Someone who doesn't know anything also how stupid it may seem. I can't return to OS x no matter what I try. ;(

• Satellite A50 - failed to resume, press any key to continue

  Hello

  Whenever my laptop goes to sleep is not wake up until I push the power button / stop twice. First to stop and then go and then I get this message:
  WARNING: Failure to resume
  Press any key to continue

  Please need help to solve this problem
  Thank you

  Usually bad drivers or a battery flat results in failure to resume.

  You can try a system restore to a date where HP was working properly and update the drivers for your USB devices.

  If it's any help, then maybe its time to back up your data and run your recovery disc recovery. Its good to do this once a year to keep the system clean and error-free. Windows tends to become slow and loses errornous over time, because of the power, viruses, software badly written, etc...

• Satellite 210ct does not start - insert system disk and press a key

  I have a very old laptop and want to move down. It is a 210ct Satellite. When I start upward, he goes and initializes memory and then after about five minutes, to be on that screen it said to insert system disk and press a key...

  It is not the disk hard as I tried it in another laptop and work very well. And then just sitting there.

  I really want to make it work again!

  Thank you

  Hello

  For me the description sounds like the laptop can not find an OS on the HARD disk bootable.
  The laptop trying to boot from the HARD drive and Windows has not been installed on the HARD disk or portable computer booting from the drive, but the environment is not bootable.

  Have you tried to boot from the recovery delivered CD or have you tried to reinstall the operating system?

• Re: Satellite 2450-201: insert system disk and press a key

  Hello

  I have a satellite 2450-201 my hard drive failed and I bought a new one.
  I went to do the installation of the OS that worked very well and cancelled before that I had to commit that I had to get out.

  Tried again and it wouldn't boot from the CD it kepps showing the insert system disk and press a key.
  I have attached my external, a drive with a boot in drive but no difference what I am doing wrong?

  Mark has soon

  Looks like you can't boot from the CD.
  The message insert system disk and press any key any appears because the laptop can not find any operating system and bootable CD.

  Try to insert an original Windows CD and try to press F12 immediately after that laptop was on the F12 key should activate the start on-screen menu.

  Check it!

• Satellite L300D-222: "insert the boot disk and press any key".

  Hello

  My laptop froze this morning and so I stopped it when restarting it however, I received the message "No boot device - insert boot disk and press any key", what it means?

  I didn't not get discs with the laptop, or have I made the recovery discs. The instruction manual says to press f8 when I restart and go to "menu of advanced start", but it doesn't matter. Where should I go from here, is there a program I can download that would have this disc? All my work on the computer will be lost?

  Thanks in advance for any help!

  Hello

  He looks at the HARD drive died and so the laptop can not boot from the HARD drive but request disk bootable.
  But to be sure, you need to access the BIOS (press F2) and check if the HARD drive is recognized in the BIOS.
  If it s not recognized, then you need a new HARD drive.

  The recovery disc can be ordered here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Satellite 2140CDS: message: "insert the disk and press a key".

  Hello

  I got this laptop but the necessary update. I tried to put a master drive from my other laptop to update and it came with 'error' and now when I turned it back on it does nothing about it, totally blank and rpet "insert the disk and press a key".

  I've got everything I can think but still can not do anything.

  Please can someone help?

  Hello

  What do you mean with master drive? Do you mean the Toshiba Recovery CD or what?

  It seems that the laptop can not find a source of seed and so this message appears on the screen!

  If you use a FDD drive please check if the disk has been removed.

  You must simply insert your Toshiba Recovery CD and boot from the CD/DVD drive. That's all.

  PS: Check if the HARD drive isn't too bad, as if the internal HARD drive is malfunctioning you will not be able to reinstall the OS from the CD

• Pavilion dv6 - 7095ca: no boot device - insert boot disk and press any key

  
  

  Thanks for your help and please excuse my bad English.
  Please check item 7, if you're in a hurry. This is the point with my Pavilion DV6 - 7095-CA:

  (1) the operating system is Windows 7 Home Premium (64 bit), the provided original with my 7095CA Pavilion, more updates HP until 2013, and all Windows updates until July 2015.

  (2) now I can't access the operating system and I have no interface UEFI. I can see that I press F2 at startup, just a test simple disk in BIOS f.0Une (the test shows that the disc is OK)

  (3) return in 2013 it took a drive failure. I did replace the disk and reinstall original Win7, all updates, including the HPS, win7 updates and all my personal software.

  (4) at this time, I bought a spare hard drive and did a complete copy of the disc using Partition Wizard bootable cd. The second disc has been tested and worked perfectly, with all of my personal software on this subject.

  So I have 2 HDs identical with the same system on both drives, fully working and tested.

  (5) a few days ago I came across the HP website and made a few updates, including the BIOS f.0Une (the last BIOS update, was of course).

  (6) after BIOS update ran, I received the message "no boot device - insert boot disk and press any key".

  (7) I couldn't solve the problem, so I did remove the hard drive and install my backup drive, which lay in a dry place without danger from 2013.

  (8) I turned on the computer and got the same message "No boot device - insert boot disk and press any key", and I couldn't find any way to solve this problem.

  Now I'm doing a new installation on a third HD everything works very well, so far, in the new facility and I will never buy HP again.

• Satellite A60: Resume failure on the POST

  Hey all the... I have a laptop a60 and yesterday evening he decided to hang up, then when I reset it doesn't seem to work, then he gets to the TOSHIBA screen outpost then a few seconds later, it gives me a message "failed to resume and press a key" and then just hangs...

  Any ideas?

  Hello

  You could have simply lost the start notice. Go into the bios and make sure that it is configured to boot from hard drive 1.

  Another possible reason is that the hard drive has gone wrong.
  The other main reason for this message is occurring is that files on the hard disk (such as command.com) have somehow become corrupted or deleted.
  In this case try to recover the operating system from the Toshiba Recovery CD.

  Check it out.

• Cannot start the computer, the error message "Reboot and Select proper Boot device or Insert Boot Media in selected boot device and press a key any."

  Original title: can't access my BIOS, but blocked on select boot device

  I have a laptop Toshiba Satellite Pro. I gave up some time ago and removed the HARD drive to see if has been affected by the decline, as that was my first thought. "When turned on the laptop back, the error message:" Reboot and select clean boot device or Insert Boot Media in selected boot device and press a key. My HARD drive is installed correctly, that am a qualified technician. The laptop goes directly to this error message, when turned on, so cnnot access to the BIOS. Help, please.

  Hi Ryan,

  Please contact Microsoft Community. I will surely help you this question.

  To better understand the issue, let me know if you have tried pressing the F12 key or the key that is used to start the BIOS on the computer?

  Method 1:

  You may need to press the key (which is used to start-up the BIOS) as soon as you turn on your computer before Windows starts. See the article for more information.

  http://forums.Toshiba.com/T5/Windows-7-knowledge-base/how-to-enter-the-system-BIOS-on-Windows-7-computers/Ta-p/275629

  Method 2:

  If the problem persists, I suggest you to return the item and check if it helps.

  What can I do if my laptop Windows 7 or Windows Vista does not start?
  http://forums.Toshiba.com/T5/computer-troubleshooting/what-can-I-do-if-my-Windows-7-or-Windows-Vista-laptop-won-t/Ta-p/285717

  If the problem persists, I suggest you to contact the Toshiba Support for assistance.

  http://support.Toshiba.com/support/home

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• How to fix error of bootcamp: no boot device - insert boot disk and press any key

  When I try to install windows using bootcamp No. bootable device - insert boot disk and press any key any that appears at the start of the installation of windows 10. any solution please.

  Thank you

  What is the year/model of your Mac?

• no boot found device, insert the boot disk and press any key

  Hello, recently tried to install Windows 10 through the Assistant Boot Camp, with the help of a DVD I bought windows. But I get an error saying "no devices found Boot insert boot disk and press a key" I tried to read and do all the patches, all offer and yet no results. Any suggestions or corrections us would be great!

  MacBook Pro mid 2012

  -i7

  Evo - Samsung 500GB SSD

  -Ram 16

  -Latest version of Mac OS x

  -L' use of 64 GB PNY flash drive

  Your Mac 2012 supported creating a USB Installer to help BC Assistant. Do not use a DVD, a USB Flash drive. Your USB drive must be a USB2 flash drive, if you choose the USB mode and you will need a Windows ISO.

  See also create an ISO image for Windows - Apple Support installation media Boot Camp .

• Try to install Windows 7 via USB, El Capitan, Macbook Pro 2011 but get this error "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  I am trying to install Windows 7 via USB, (El Capitan, Macbook Pro - early 2011), but this mistake "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  You cannot use a USB on Mac 2011 Installer. Please burn the ISO on a physical DVD Windows (a DVD - R Carbon SL on the rate of burning slower is better) and use it to install Windows. The file Info.plist changes only allowing the creation of USB, but does not fully support a USB Installation.

• no boot device - insert the boot device and press a key

  I am computer purchase hp laptop for 2 days. in my laptop suddenly occur in the virus so I am recovery os DVD in the driver cd and dvd are running then suddenly second writing system is interrupted and automatically power off. Why do I admin please

  I am open to my laptop and press the login button then display automatically the no bootable disk - please insert the startup disk and press a key and then in my point of view what I say