Satellite A60: Unable to connect to the internet via a modem - no dial-up

In my Satellite A60, WinXP Home, when I try to connect to the Internet via the modem of Toshiba, I get error 6: handle not valid, and after a few attempts, I get error 50: all devices connected / request not supported.

Device Manager / network / card Asynchronous RAS displays an error (black exclamation point on a yellow background).
The driver is asyncmac.sys = MS Access Remote network serial driver.

I have:
-tried to uninstall the RAS asynchronous card, but no luck, didn't say it may be necessary to start
-modem uninstalled / reinstalled
-update of Windows XP through windows update
-update of the bios / modem / network drivers from Toshiba

No luck, the RAS asynchronous card error is still there.

Any suggestion?
Thank you
Alessio - Italy

Advertisement

I think that this problem is Windows XP and map Asynchronous RAS, not the modem.
The modem correctly composed the number, negotiates the user and the password, and then I get error 6 and 50.
On the internet I found this tip for uninstalling and reinstalling the RAS asynchronous card:
http://forums.practicallynetworked.com/showthread.php?t=6781
I followed the instructions and run RArepair.exe.
It uninstalls and reinstalls the map Asynchronous RAS, but RAS is still in error (the yellow field in the Device Manager).

Tags: Toshiba

Similar Questions

  • Unable to connect to the internet via a modem router - Satellite A200

    Thanks to Xardas, I was able to successfully install Windows XP Pro, but not everything is working as it should. Of immediate concern is my inability to connect to the internet (DSL) through the installation of the existing modem router that I use. How can I check that the ethernet drivers work? … My Satellite A200 does not - connect the appropriate port light does not illuminate.

    Oh yeh. I noticed that whenever I start (boot) a "Wizard" pane appears informing me that new hardware was found and that the drivers have not been installed but it doesn't tell me what the new material is! At the same time, there is a separate pane that announces that the drivers have not been installed correctly.

    Of course, I can use the computer as it is, but before letting my wife loose on this subject, I would like to get rid of anything that can give her cause to panic.

    Where are you Xardas?

    Check please the Device Manager and all the entries listed under network adapters. LAN card is listed there?

    Have you installed driver LAN?
    What A200 you exactly (A200-xxx)?

  • Unable to connect to the internet via ethernet.

    Unable to connect to the internet via ethernet.

    You have published a statement... is not an issue. You have a question?

    Do you mean that you try to use Ethernet for Internet connection? OR are you asking how to connect to Internet if Ethernet is not possible?

  • Satellite L20: Unable to connect to the internet using mobilephone & dongle BT Mecer

    Hi all

    Mine is an edition of Satellite L20.
    I recently installed XP Professional Service Pack 3. I connect to internet using my USB cable with my Sony Ericsson C702 (use the phone as a modem).

    Since there is no bluetooth built into my laptop.
    So, I bought a Mecer bluetooth dongle. I installed the bluetooth software. Can I transfer data between my laptop and my mobile phone via bluetooth.

    Now the problem is I can not connect to the internet via bluetooth. I opened my bluetooth IVT software and paired my laptop and mobile computer. Then I opened my Sony ericsson suit and looked for my mobile finds, my mobile and still once he pairs with my cell phone and when he tries to connect with my mobile phone its shows "device cannot be detected, try again." I tried to reconnect, not matching and pairing it several times, but no use.

    I also found one thing, just after it displays "Device cannot be detected," a pop-up message "SEPCSuite.exe has encountered a problem and closes the window with options."
    1) send to microsoft
    Including 2) send.

    What can we do to fix this problem?

    No idea...?

    See the website of your provider of Bluetooth software to help. This forum is for Toshiba Software only.

  • Unable to connect to the Internet via a Linksys Wireless card

    I used a Linksys BEFW11S4 for several years with no problems.  A PC is connected via a network cable and the other (Dell laptop) used a wireless adapter Linksys that plugged into the laptop (model of Linksys WPC11 ver (4).  All my computers using Windows XP with the latest service packs.

    I plugged the Dell laptop to the router via a cable to transfer files faster than the network B.  Then, when I disconnected the cable and reconnected the wireless card, I was unable to use the Wi - Fi connection to connect to the internet.  Wired works very well, is not wireless.

    Windows reports a good wireless connection to the router, but the machine is unable to connect to the internet using the wireless card.  It can connect to the internet when using a network cable, however.

    Pings what either using the Wi - Fi connection failed (expired).

    I used another laptop (a more recent Toshiba with a wireless card built-in) to connect to the router and it works very well with the connectivity wired or wireless.  No problem switching back with this machine.  So, the problem is not with the router or the router configuration.

    I was through the forums and seen a LOT of people seems to have the same problem with these Wireless Linksys routers.

    I tried to use the Easy Link software to configure the machine, but: (1) Linksys updated web site is not valid, and (2) with the www.linksysfix.com/ela site that directs users to the software is also invalid.  Linksys technical support seems to be lacking.

    I went to the usual network setup menus and two laptops seem to be configured the same way, again, we're working wireless and we do not.

    I would appreciate solutions others have tried and who has worked with this problem.

    I reinstalled the drivers for the Linksys card and it does not work.  Windows recognizes the new hardware card, reports that it is connected to the router, but still no internet connection

  • Unable to connect to the Internet via my iPad "Personal Hotspot"

    Hello

    I am connected to the internet via my Personal Hotspot iPad2 connection and my laptop... works very well, as you can see... BUT when I do a search on my cinema system Sony Home the wifi hotspot does not yet show upward!

    How can I connect to my Personal Hotspot iPad2?

    Thank you

    Phill

    Hi Phill,

    A Hotspot is limited to a certain speed by the operators. Access point might not meet the requirements for streaming the video data on the Internet.

    So, the Home Theater system cannot be connected to the Hotspot.

    The Internet speed should be 2.5 Mbps for SD videos streaming and 10 Mbps for streaming HD videos.

    If my post answered your question, please mark it as an "accepted Solution".

  • Unable to connect to the internet via a cable brodband or dsl computer laptop HP pavilion g6

    good day to you all...

    Please kindly help regarding me my problem... I deleted my local c drive using a third-party gparted application... I did this because I do a partion before I reformat my laptop HP PAVILION G6... then I have already installed windows 7 on my laptop, but my problem now I can not connect to the internet via broadband or ADSL cable... can you please help me find a solution... also, my wifi does not work before and I found the wireless LAN driver here I download yesterday... now wifi works...

    Thanks in advance

    Hello

    Please download the driver from the internet of the HP website steps below.

    1. Go to the web page software downloads & HP driver for your model.
  • Unable to connect to the Internet via AP WAP54G through a BEFSR41 wired router

    I'm puzzled. This connection was working fine but something changed... I don't know how he did. I connect to the internet via a WAP54G through a BEFSR41 to a cable modem. I checked all the settings and even reset several times but nothing helped. I can connect wireless to the WAP54G but no internet connection. The signal strength is excellent. The Vista wireless interface signals that I am connected but only locally with no internet relay. What's wrong? What I forgot. Any help will be greatly appreciated.

    Solved the problem. Seems a sequence to these pair of power and even if I cycled power, I did not properly. Also, I created a new wireless network to ensure that nothing is associated with the former network that has been tampered contributed to the issue.

  • 2009 time capsule cannot connect to the internet via a modem

    I had my 2009 Time Capsule or airport works very well with the modem from my ISP for years. I use the TC a hub wireless and backup. The upgrade of the modem: no problem. Over the weekend, there was a failure of the internet that has since been corrected for days. Since my TC failed to connect to the internet via the modem. I can get online via an ethernet cable from the modem to my two computers (one is a janky PC, the other bought a MacBook Pro in 2015), so I know it's not the modem.

    I turned off and reset the modem several times. I turned off and reset the TC, repeatedly. I've reconfigured the TC twice per the instructions found in other discussions here. I _may_ not having the latest version of the software installed, but this has never been a problem in the past. Reconfiguration will display a green light, but in the diagnosis of the airport, it shows that it has not Internet even when connected via the Ethernet cable to the modem to work. Icons wireless on my laptop an exclamation or a warning icon.

    The cable operator suggested that sometimes the router manufacturers 'close the ports' and must be reopened if the connection is down for awhile. It makes no sense to me, but I'm not very technical.

    Any thoughts? Thank you very much

    Renee

    What is the number and the model of the modem?

    There is a connection by Ethernet cable from the modem to time Capsule. The cable is connected to which port of the modem?  The cable is connected to which port on the Time Capsule?

    If you open AirPort Utility on your Mac... (Finder > Applications > utilities > AirPort Utility)... is displayed the image of the time Capsule?  If Yes, when you click on the image, a small window pops up with an edit box... or... an option for installation manual appears at the bottom of the window?

  • error when you try to connect to the internet via a modem usb - 6 error: the handle is invalid

    error 6: the handle is invalid - I see this error message when you try to connect to internet via usb modem

    I'm using windows Vista Home Basic and attempts to connect to the internet via a usb Huawei modem.

    but when connect this device on windows xp pro his works very well.

    but with vista I see this error msg

    The handle is invalid

    any idea to solve this problem?
    Thank you

    You can get in trouble with your device drivers, firmware and/or software.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you shouldat least make the modem and everything you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

    Try to uninstall and then reinstall the modem again.  Remove the modem through Control Panel > phones and Modems, then uninstall the modem in Device Manager. Once the reboot is complete and it is reinstalled it should work (as long as you use the update of the above paragraph).  Make sure that you uninstall in this order.

    Are you sure that the modem is compatible with Vista and the rest of your system?  What is the manufacturer, brand and model?  You can find here:http://www.microsoft.com/windows/compatibility/windows-vista/.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Satellite L - unable to connect to the internet

    My laptop for some reason any does not connect to the internet!
    When I run diagnostics it says that there is something to do with the Windows Firewall, but when I have my remarks with the firewall that it used to always let go me on the Internet even if a connection is present.
    Restore factory will help?

    I also have the restore CD/DVD thing, but I'm a bit confused as the product key on the bottom of the laptop is different than at the back of the CD case.
    At first I thought that it would be grandpas CD/DVD as it also has a Toshiba Satellite but when I compared its product key on the CD/DVD was different.
    Is how important it?
    If this is not the case, when restoring to factory settings what product key can I use the CD/DVD or on the bottom of my laptop?

    Please help I need 2 fix this problem quickly, as soon as possible!

    Hello

    If you want to install the operating system and to have the factory settings, again, you must not enter the activation key. It is already enabled for your laptop model and you can use it so often desired. Please don't be confused on this issue. Everything is OK with him.

    What about your Internet connection?
    As you wrote: for some reason any does not connect to the internet!
    If you do not know the reason how should we know it. ;)

    If the network adapter is properly installed, I guess some false parameters are responsible for this.

  • Satellite L650 - unable to connect to the internet after the clean install of Windows 7

    Hi guys

    IM really angry because I just finished installing a new copy of w7 on my laptop (upgrade home pemium to proffesional) and now the ONLY way I can connect to the internet is via a usb device.

    I even tried ethernet and no luck.
    The screen display resolution is also mucked up.
    What can I do?

    Also reset it to factory settings make me reinstall it home premium?
    If so I'll do that but I need to know if this is the case, please

    its a PSK1JE L650 btw

    Post edited by: bilal98

    > I tried Ethernet and no luck.
    > The screen resolution is also mucked up.
    > What can I do?

    You must install the necessary drivers.
    For internet connection, you will need to install the LAN and WLan driver.
    To get the best display resolution install display driver

    > Also reseting it to the factory settings let me reinstall it home premium?
    > If so I'll do that but I need to know if it does, thank you

    Looks like you have already done this as posted here:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=68031

  • Unable to connect to the internet via the Time Capsule 2 TB router

    Hello

    I can't connect wireless to the internet using my Time Capsule (see 7.7.3 running).

    I mainly use a macbook air (so no ethernet jack) running El Capitan 10.12.2 but the problem also occurs with our iPad and iPhone.

    The system has worked for a few hours after the initial Setup, but our ISP crashed and I was not able to make it work since their entry online. I've used a Linksys router.

    ISP is done via a wireless connection. The provider can see my antenna and an Apple device connected to it. I have a static IP address with DNS assigned.

    My airport utility shows green for the network connection and the internet but no Web page will open.

    I did reset hard and reconfigurations a few times which one where I left the modem to the router cable disconnected until I got the full configuration.

    The wireless network is using DHCP with DNS assigned to a beach.

    Router mode is DHCP and NAT.

    Any ideas would be appreciated.

    There are a number of situations where the TC will simply not work.

    I have a static IP address with DNS assigned.

    If you have configured the Internet of TC tab with static IP address?

    Would it not be possible to get the address IP via dhcp... have you tried?

    Wireless modem is connected by ethernet to your TC? Also, the modem is a router that is bridged?

    I really need to see the numbers... but it's not good to put the public IP address here... xxx on the first two bytes and just give me the rest... as long as the IP and gateway are the same.

    Or send it to my email address. (see my profile).

    Your linksys might work, but the CT will not... This happens because Apple does not provide sufficient flexibility to allow the wireless Internet service provider. (Or Satellite or fiber or some ADSL).

    But it can also be a problem with the network... we have problems with the WAN port with some modems.

    Does the ethernet connectivity light come on, when you connect the modem to the WAN port on the TC?

  • Tecra A8 - unable to connect to the Internet via a cable

    Hello!

    I can't connect my laptop to the Internet via cable. The laptop does not recognize when I put the cable. Recognize only the wireless connection.

    Can someone tell me, what is the right software that I need to install in order to have cable internet?

    Hello

    Normally you n t need a software to connect to Internet or router. You should only check the TCP/IP settings. This means that if you have a router that supports DHCP default settings should be allowed, otherwise, you will need to set static IP addresses. It s based on your router configuration.

    What OS do you have right now?
    Is the OS installed Toshiba now or another OS?

    You can also try to update the network driver which can be downloaded from the Toshiba page.

  • Unable to connect to the internet via a Netgear router

    Original title: Hello, my HPwill not recognize my Netgear address

    My roommate paid late clearwire and clearwire held my HP for Robert. Eventually my computer wouldn't put my netgear on the address bar signal.

    Hello

    1. you receive an error message?

    2. what operating system installed on your computer?

    3. what happens when you try to connect to the internet?

    Provide more information to solve problems. Refer to this article How to ask the question: http://support.microsoft.com/kb/555375

    Also refer to this link and check if it helps: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-finding-wireless-networks

Maybe you are looking for