Satellite A65-PSA60U has video problems

Similar Questions

• Satellite Pro A120 has network problems

  Mr President.

  I, Jayarajan.C.N, working as an Assistant Executive Engineer in the Kerala State Electricity Board, Kerala, India.
  We had a laptop brand Thoshiba (Satellite Pro A120 type; PTA83L-08L02N model number; SL.no. Y6131B1488H) as part of a package of type brand MD - 2000 Tesient relay.

  We use this laptop for other official purposes also. It works smoothly.

  But we were faced with the following problems:
  1. we could connect the computer laptop in Local Area Networking with other desktop computers and laptop. But we could not transmit or receive data from the other computer.

  2. we could connect us the laptop to the network in ad-hoc mode wireless and the laptop showed the link as 'excellent '. But as in the case of LAN, data may not be transferred or received.

  3. we tried to use dial-up modem to the laptop. But we do not have internet access. The error showed was 'busy line (error 676) '. In fact, the line was not busy.

  4. we checked to access internet using Reliance Netconnect USB modem after installing its software. He also failed in showing the "username & passwords are wrong in this area.

  5. I added an init string in the Toshiba modem commands: AT & FX1. But before that, I made a mistake. I installed the Client Services for Netware. After that, the connection mode was changed. But I don't know how to uninstall "client services for Netware". I selected the account control user - change the way users log on or off, I received the following message: "client for Netware has disabled the display of welcome and quick user agrees." To restore these features, you must uninstall client services for Netware. As I said before, I don't know how to uninstall the same. Now during log on, I have to use ctrl + alt + delete to log on.

  After you have added the string init AT & FX1, I have only seen the modem trying to catch the net until the "veryfying username and password. But he could not catch the net. Please note that I had installed the client services for Netware. I saw that the modem has been "connecting" even after a few minutes and I noticed the system reacted very slowly.

  In short, we cannot achieve any type of networking and by error logging has been changed...
  We ask your advice detailed without delay.
  Thanks in advance.

  Regarding
  DANIELA. C.N,
  Assistant Executive Engineer,
  [email protected]

  Hello

  Please don t be angry with me, but this is a user-forum user and please don t expect magical solutions or answers.
  However, I will try to give some suggestions.

  1.) Please check if you are in the same workgroup or domain and check if you have set the right rights to folders. In addition to check all the parameters of the firewall and possibly disable it please!
  (2) see point 1)
  3.) found a Microsoft document describes this error message:
  http://support.Microsoft.com/kb/187215
  or
  http://Xtra.co.nz/help/0, 5721-2513242, 00.html

  (4) Please check the user name and password. Please note; It case sensitive s

  (5) If you want to remove the Client Service for Netware, click on START/SETTINGS/CONTROL PANEL/CONNECTIONS NETWORK. On your CONNECTION to the local AREA NETWORK right click, select properties and click on it, then highlight "CLIENT SERVICES for NETWARE" and click the "UNINSTALL" below

• Satellite M50 - LCD has serious problem

  Hi all

  Thanks in advance to anyone who takes the time to read this. I had my * Toshiba M50 * since 2006 and it's been great throughout. Until recently, the screen started to play up - he would go a little 'reverse', everything gets whitened with lime and blurry but legible - just. Very boring and very difficult to describe. I can post a picture if someone isn't what I mean. I found that if I applied pressure to the upper center of the screen it would come right. I thought it was just a loose connection and that the machine is out of warranty, I pulled out the LCD Assembly and I think I've done worse, not better. Now the screen is always white, and images appear reallly slow, especially when replacing resoultions and video modes.

  I guess the General issues I'm throwing here: it seems a common problem, and it does not require a new LCD? (I think that the inverter is fine). Replacement LCD are easy to find? Are there tests 'elimination', I do it myself? I confirmed that the external graphics port is working.

  Could this be the reason finally buy that MacBook?
  Seriously, any ideas are appreciated.

  Marcus Prebble
  Sweden

  Hello Marcus

  Have you tried testing with external monitor?
  It will be interesting to know if the same appears on an external. If not then is probably defective and must be replaced.

• Re: Satellite A300D-13 has: problems starting - starts not or only black screen

  Hello, I have a Satellite A300D-13 has and the problem is, when I try to start the laptop for most, he tries to boot from the hard drive or the DVD drive but then he just stops and starts again immediately to do the same. In this case 4 or 5 times. Once it seems that it starts well, but the only thing I see is a black screen. And the keyboard does not work either.

  If I try several time with closing by pressing the power button (you know who I mean), I managed it starts normally (but such a situation is always annoying). Moreover, it seems that this happens only when I did use the laptop for a while. So maybe it has something to do with the temperature. But more or less 20 ° C in my room.

  In the Bios I have change the boot order of the sources (I can't change it much more)

  I am grateful for any kind of help.
  Thank you for your cooments in advance

  Hello

  The issue could be related to software, but also for the hardware problem.
  But first, we have to check if it s a software problem.

  You are using the original operating system preinstalled by Toshiba. Is this good?
  AFAIK the most recent series of laptop is equipped with HARD drive recovery option.
  In this case, the Toshiba Recovery DVD has not been delivered with the laptop but there is an option to create a.
  HARD drive recovery option can be used to reinstall and update the operating system.
  I would recommend to repair the operating system and reinstall it again by pressing the F8 key. The Advanced Startup menu should appear and then you must choose to repair your computer.

  This option will start the recovery procedure and the BONES to relocate again.
  Please check if a new facility will improve the situation with Notepad.
  In addition, it would be desirable to update the BIOS, if a newer version of the BIOS is available on the European driver Toshibas page.

  If this suggestion won't help you then whole notebooks material must be check by a local ASP.

• Satellite L300D-11 a - reader problem DVD and blue screen

  Hello

  I'm going out of my mind: o.

  My Satellite L300D-11 has been delivered with a Windows Vista Home Premium, but I recently did a clean installation of Windows 7 Home Premium 64-bit.

  Since then, I have had problems with 'Blue error screen' come randomly. Bought and installed a registry clean program, but that did not fix the problem. Anyone else with this problem - and a possible solution.

  And now, my big problem. My CD and DVD drive crazy me; (o) it's a rug * a DVD-RAM UJ-850 s ATA and my internet research I found that many carpet * an owners have had the same or similar problems. My drive won't regonize or CD play/play. DVD with videos or programs, I can play. CD burning is not possible and DVD burning is sometimes work and other times not.

  I have read on different patches is displayed - also here on the Toshiba - not of the suggested solutions forum works for me - the new solutions I could try.

  Seriously think about buying a USB external DVD drive - but can be it someone please tell me why Toshiba does not get their B fingers * and find a solution as it sews Sony did it.

  I look forward to any reply; (o))

  Someone told me about this quote - "does not it was easier - works on getting smart! I need your help to get smart; (o))

  Hello

  I understand that it was ok with your laptop before installing Windows 7. It is so related to hardware problem software. Can you tell if it was original iso of windows 7 or the Assembly. Have you installed all the drivers for the Toshiba driver page and the maintenance of the right installation order? What burning software do use?

  Have you done this procedure mentioned in this forum:

  Go to Device Manager and remove the drive from the list of devices CD/DVD.
  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  Reboot the laptop and wait for the CD/DVD drive would appear once again

  Answering these questions may help to understand your question.

• Satellite A65 will not start and I get only the blue screen!

  When I start my satellite A65 a blue screen comes up saying "a problem has been detected and windows has shut down to prevent damage to your computer.
  It says to check if I have enough disk space or to disable or update the driver, if a pilot has been mentioned in the stop message... or to check the updates to the bios...
  I can type everything that said if I need, but the jist

  The world is - that sound familiar at all?
  It may be because I was not updated enough when he told me to.
  It does not start, not even on safe mode, and it won't let me not restore, which I would be perfectly willing to do at this point.

  help, please
  Joly

  Hello

  The blue screen of death usually occurs because of the serious software problem or due to malfunction of the equipment.
  In your case, it looks more like something wrong with the hardware. Why, because you're not able to restore the laptop from the recovery CD Toshiba delivered!

  Need buddy? I think that the laptop should be verified.
  Try to contact an ASP in your country and ask for later handling.

  Good luck

• Re: Satellite Pro M10 - strange Boot problem

  Hello.

  My Satellite Pro M10 has developed a strange problem. It will power with its installed hard drive.

  The yellow light beside of the plug symbol starts flashing. When there is no hard drive not connected, or another hard drive from another trendy laptop it starts fine?

  Please help, thanks in advance,

  Destro

  I don't know how to help you. HARD drive changes and everything will be ok.

  Is - this original hard drive that you got with your laptop?

• Satellite P50 - C - 17 M - problem with games

  I just bought a new Satelitte P50 - C - 17 M with inteL HD integrated graphics cards and also an external of 950M from Nvidia geforce gtx I guess?

  I'm really not good at this sort of thing, anyway I chose it cos it was cheap for its specifications and also 8 GB of ram, I thought it would be good for a game until I buy a desktop computer. Ive changed all things need in Nvidia Panel so all my games and applications are using the graphics card from NVIDIA and I've also clocked it form 993 GPU in 1124, which is the highest before he goes to the overclocking I think.

  First I tried to play the way of exile and I was happy to see my FPS up to 250-300 fps, but then I kept getting spikes up to 10-20 fps that was not logical. I tried to find a solution online and people were saying that the game has race problem on Win10, but even when I ran it in compatibility with 7 or 8 it continued doing the same drop in FPS.

  So last night I tried to play FFXIV and kept the same past.

  My constant fps were 59-65, but then I would have up to 10-12 points. I asked my friends and they told me that my laptop probably evolves to the internal graphics card during the game on his own so the FPS will be declining.

  Is the any landmark known for the problem :/?

  Thanks in advance.

  In Christmas 2015 buy a laptop Toshiba Satellite P50 - c - 11 k.

  It was 2 times by the technical service for various reasons and 2 the main reason was properly fixed (a failure of hard drive and another failure on the LCD)

  Recently, I got in touch with the service center for a problem, I think that I started to use the computer. The computer has a large processor and a large graphic and when used separately team offers exceptional performance.

  But I have a big problem that makes it impossible to use it normally.
  At the point where I use the computer with any of the games I bought legally and cerciorandome that the equipment meets the performance requirements of leftovers too.

  Early on the game should be noted that the team starts to heat a lot, after 5 minutes starts to slow down excessively. Monitoring the software using the following can be seen:
  -FPS (frames per second) generated by the game remains stable for the first 60 minutes, running with absolute normality
  -The temperature of the CPU starts to soar, reaching his limit of 105 ° C 5 minutes
  -At this time, the FPS success until 10/11, remaining so until the processor retrieves the temperature of 80 ° C
  -FPS return to their normal level of 60 a few minutes more, everything works perfectly during these times.
  -At the time where the processor returns to reach 105 10/11 FPS again until that process is repeated constantly.
  -This error is played every 2 or 3 minutes of play, indifferently, resolution, quality graphics and everything what you can get for configure options of the games.

  Looking for information on different websites on the problem and its solution have found different information that points to a serious problem of computer design.
  Because the CPU and GPU share the same broadcaster at a time that the graph starts to render passes to the temperature of the CPU's are not fast enough to cool the coming collapse.

  http://laptopmedia.com/review/Toshib...per-mid-range/

  I raised this issue with the service the customer of Toshiba in Spain for a couple of times. The answer is:

  «The information I have available, they indicate that the laptop has been tested and left our cumplindo Center repair factory specifications.»
  We can do nothing else in your laptop because it meets all our references and diagnostics. "

  I feel that they do not read my emails

• Satellite A65-S1062 battery does not charge

  Hi all

  I bought TOSHIBA Satellite A65-S1062 a few days, but it was not new.
  And now I have a problem with loading the battery = (first of all, I reinstalled the operating system (windows xp sp2) and tried to install all the drivers, but I had problems with 'save energy'.

  Initially the indicator in the Panel showed 6% of load and wile installing the programs that I checked the indicator, is perhaps half an hour, he showed at 7% and everything would be ok but within an hour he showed me the 0%, and it does not change for 2 days already.

  I checked my computer with "everest" and he showed the wear level - 25%, but what is interesting, it shows the different load (150 mW to 20000 mW) capacity rate appears as 150mWh (0%).

  See photo here [http://i024.radikal.ru/1005/71/195d9b23719f.jpg]

  PS: I'm sorry for my English, but I'm originally from the Ukraine and cannot speak fluently.

  Hello

  In my opinion the battery is malfunctioning because it s old.

  My 6-year old s battery no longer works it shows what he s is fully charged, but the laptop can run only 1 min using the battery power
  After that the battery is empty.

  It s nothing unusual! Sooner or later each battery would die!
  I think that you need to replace the battery, I think it should help

  Welcome them

• Re: Satellite A65 will start not because of recovery CD formats the HARD drive?

  1. my Satellite A65 WinXP seems to be corrupted and does not start.
  2. my system is dual-boot, Windows XP (16 GB) and Xandros Linux (24 GB)
  3 Xandros boots. Windows XP has been removed from the start menu.
  4. If I run the Toshiba Recovery CD, it will enter and reformat the whole disc or only the first partition WinXP?
  5. are there instructions online for the recovery CD?

  > 4. If I run the Toshiba Recovery CD, it will seize and reformat the whole disc or only the first partition WinXP?

  Well, if you have an older version of recovery which provides two options; standard recovery and recovery expertise, so you could choose the partition on which the operating system must be installed and ONLY that partition is erased and formatted.

  But if you, recovery CD doesn t contains options then the recovery CD will format the entire HARD drive!

  So be careful

  > Are there instructions online for the recovery CD?

  Search this forum for similar issues. There are a lot of comments that might help you

• How to connect by Satellite L300-1 has 3 on TV?

  I have laptop Satellite L300-1 has 3, and I can not show pc image to screen LCD TV Philips 5603d.
  I tried with the vga (pc) in RGB (TV) cable and with connector vga, DVI and DVI to HDMI on the side of TV, but nothing happened. Is it possible to see the image on the TV?
  I need software for that, or I did something wrong?

  Thank you!

  Hello

  All LCD televisions have several video - in different ports and what you should try is to use the VGA-to-RCA cable.
  Your TV must have port cinch. Connect your laptop to the TV, turn on RCA TV port and then use FN + F5 key combination to switch the LCD TV.

  Please let me know if this work.

• Satellite L300-1 has 3 and WXP - computer laptop is very slow

  I installed Windows XP computer laptop Satellite L300-1 has 3.
  After portable installation is very slow, I think that the problem in the SATA driver.

  Please send me the driver SATA for Windows XP Home edition, or please give me the solution.

  Thank you

  Hello

  May I ask how you installed Win XP?
  Did you change the SATA mode on compatible in the BIOS settings?
  If yes then this problem is related to the missing SATA drivers!

  You can find the SATA drivers in the Intel Storage Manager which is placed on the page of European disk from Toshiba!

  Launch the .exe with the settings file a p

  For example (the files will be unpacked in the storagemanager folder):

  c:\downloads\iata_cd.exe - a c:\storagemanager Pei

  An accurate description, you will find in the Readme! Read it!
  Then you will get the unique file which could be included for Win XP CD using nLite software!

• Satellite Pro U300 Expansion Chassis problem

  Hello fellow users.

  I am trying to use an expresscard with my satellite pro expansion chassis. Problem is that in Device Manager, I am getting error code 12 for PCI bridges in the chassis and the error code 31 for the PCI bridge on the card I want to use in the expansion chassis.

  I installed latest version of the BIOS but cannot solve the problem.

  Slot for Express card in my computer is fine because I use an Ethernet Express of 1 card G without problem.

  Hunting on the web, it seems that the problem is related to the BIOS being unable to handle the number of PCI bus in the system, refer to the knowledge base article 942959 Microsoft. This article explains the problem and how to Vista and W2008 reslove.

  I am running XP and work around, that they said, does not work. Upgrading to Vista is not really an option as software I want to use is not yet the version for Vista.

  My only options left at this stage are fresh install XP to see if it corrects the problem, or vista fresh install and hope I want to use drivers/software works under Vista.

  Has anyone else seen this problem, got any other suggestions.

  Thank you very much

  Hello

  your problem is unusual, but what I want to know is: which model / manufacturer, what is this expansion chassis?
  It would be interesting since without knowing what we´re talking expansion chassis, it would be difficult to know where exactly the problem could be...

  Greetings

• Satellite A65-S065 - button Power LED is blue & amber at the same time

  1st off I have a S065 A65 and worked well after a replacement motherboard, my fault, he had to be replaced.

  In any case, I have the power button LED is blue & amber LED light up at the same time. Anyone has any idea as to what it means, or maybe I'm going into something, I don't know what it is and it should be reset at the back. Any ideas?

  Thank you
  Ben

  Hello

  I checked the manual of the Satellite A65 and there I can find information that the Power LED blinks orange indicating the machine is in standby mode. So for me it sounds like that your laptop is in sleep mode.

  What happens if you click Start > stop and choose the closing down in the menu drop-down? Normally, the power LED button must be turned off and also the laptop is in sleep mode.

• Satellite A65 - Crash during the upgrade of the BIOS. Not now boot.

  I have a satellite A65 s-1064, and I was upgrading the BIOS from windows. Suddenly, the computer turns off, and I thought that it meant that the update was made. I pressed the power button, and booted the laptop, but remained at a black screen. I thought maybe the BIOS was always something, so I left for a while. After an hour, I returned to find even on the black screen.

  I pressed the power button to restart, but nothing happened. I finally had to pull on the power cord and the battery. Once I did, I plugged it back in and put the battery in, but nothing happened. No battery charging lights. No power lights at all. Nothing happens when I press the power button. My question is, could do a BIOS upgrade failure, and could I somehow reflash the BIOS without power?

  Hi Brandon,.

  It is very unusual for an upgrade of the Windows BIOS cause this kind of problem. Normally, the power subsystem is quite independent of the BIOS.

  Is there a reset button that you can use to reset the system your A65? (Sorry, but I'm not familiar with the A65). If so try to press it to see if this will allow you to restore the power of your laptop.

  If you get no power at all (try removing the battery and then connect to the AC adapter), then it is possible that the power supply or the motherboard did not in this case, you will need to contact an approved Service Agent for the laptop repaired.

  As for your question about flashing the BIOS without power, I'm afraid that this is not possible. You will certainly seized the restoreds power to your laptop you can proceed with your upgrade of BIOS.

  HTH