Satellite A65-S126: could not find the RTC battery

Similar Questions

• Satellite L350 - 16L: could not find the SATA drivers to install Win XP Pro?

  I want to install XP Pro.
  Can not find a driver for a SATA drive. nLite will incorporate into xp driver SATA and install XP and then install any driver and the program.
  You will connect to the SATA driver, please

  I don't know who is right.

  Thank you

  Post edited by: splicanin

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=39465

  Jimi posted a link to the worm: 8.6.0.1007 Intel Matrix Storage Manager, which includes the necessary SATA drivers!

  Good bye

• Satellite A200-PSAEO: could not find the card reader driver Vista

  Hello.

  I have the Satellite A200-PSAEO and I can't find the drivers for the card reader for Windows Vista.

  Any ideas?

  Thank you very much.

  Hello

  What of the installation of the Flash Media Driver v 2.0.0.6 released on 31-01-08?
  The Flash Media driver is driver for your bridge Media Slot.
  This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.

  You can find on the page of the European driver Toshiba Satellite A200 PSAE0 download area.

  ;)

• Satellite M70-122: could not find the network controller driver

  Hello! I can't find a driver. Any body can help me.
  Model M70-122.
  Thank you.

  Hello

  Have you checked the download from Toshiba site for the driver LAN?
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  You must select the Satellite M70 (PSM70) to download the right driver LAN.
  Also try to also install the Wlan driver because this device is certainly the Wlan card.

  Good bye

• Satellite A500-15N: could not find the network adapter XP driver

  Hello world

  I just blown away vista on my new A500-15N and installed XP + SP2.
  The installation went well but I have some problems with some devices does not.

  They are: 3 x of the device Base, 1 x Ethernet, 1 x network controller controller system, 2 x PCI device, 1 x controller Bus SM, 1 unknown device x and 1 x video controller (VGA Compatible).

  I thought that I would be able to load network card drivers in order to allow access to the internet and then be able to download everything, either automatically, or manually. But I can't have any network card to load drivers!

  After loading some on the Toshiba web site, it makes no difference.
  I deleted and then to detect automatically the network card in Device Manager, but I can't find any drivers installed to run.

  Anyone know what I can do to fix this, or any other issue?

  Thank you

  MrAngry

  Hello

  Do you need the card network LAN driver Wlan or both pilots?
  As far as I know the piece of LAN card is Realtek (1 Gbps) and the Intel 5100AGN WLAN.

  The WLan driver can be found here:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads
  Intel PRO/Wireless 3945, 4965, 5100, 5300

  The driver LAN on the Realtek page:
  http://www.Realtek.com.tw/

  You can consult the page of the European driver Toshiba. Other series of laptops use the same Realtek LAN card and the driver should work too.

• Satellite L500 - could not find the SRS audio device

  At the start of my Satellite L500, a message appears saying - could not find the device audio compatible srs. This has happened when I upgraded to windows 7.

  Can someone tell how to fix this?

  Hello

  I have the Satellite L500 also but I couldn't t notice this problem. SRS audio device that has something to do with the audio driver, I think.

  What do you think to update this driver? You can get it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Before installing the latest version I recommend you remove the old first. Do a restart and install the most recent.

• Could not find the time stamp option in the historic window

  Could not find the option "date of visit" in the historic window as described in "ehow" for Firefox

  This is the most recent column visit.

  Have you looked in the menu ' views > show columns "in the library?

• Satellite P100-160: could not get the proper functioning

  Hello

  I was wondering that if someone had had experience of this problem - the sound on my laptop did not work.
  However when I go into Control Panel, windows tells me that the card its conexant high definition smartaudio HD2 works.

  If I try to download the sound card again, an error message comes up saying "" driver installation failed: could not find the device of media for this driver. ""

  Strangely, the sound will then work fine.
  But the problem returns to the restart of the computer.

  Does anyone have advice or suggestions?

  Any help much appreciated.

  Hello

  The laptop supports the Conexant High Definition sound card and therefore the Conexant audio driver should work and can be installed.

  What operating system do you use?
  The operating system is up to date?
  Have you tried the Toshiba Recovery disk?
  Have you tried to reinstall the OS again to check if the OS is not confused upward?

• Deployment of sbRIO 9606 chassis LabVIEW (sbRIO-9606): (Hex 0x80DF001E) could not find the plug-in for this deployment item. Make sure that the appropriate software is installed.

  Hi guys,.

  I have problems getting my sbRIO 9606 to deploy.

  Everything's fine until during the deployment process, I get this:

  Deployment of sbRIO 9606 chassis (sbRIO-9606)
  LabVIEW: (Hex 0x80DF001E) could not find the plug-in for this deployment item. Make sure that the appropriate software is installed.

  I tried to reinstall LV (ensuring that FPGA & RT deployment options are checked) and the 9606 software shipped, but it made no difference. I'm still waiting my next serial key by NOR, I have to wait that I recorded it before I can deploy?

  Please find attached the screenshots of my:

  • License Manager OR
  • Overview of the 9606 MAX
  • My project folder
  • Dialog box deployment where the error is displayed.

  -Adam

  Hi Tim,.

  In time real 11 is installed according to the recommended software battery installation program included on the disc NEITHER RIO provided in the starter pack.

  The problem is that the recommended Software NI Scan Engine 3.0 installation program.

  The sbRIO 9606 does not support scanning engine.

  Once the scanning engine support has been uninstalled, I could deploy on my 9606.

• could not find the drivers for window7 32 bit 15-d018TU hp

  Dear Sir, I recently bought 15-d018TU with window 8.

  I installed 32 bit Windows 7.

  but I could not find the drivers for window7 32 bit.

  I need drivers now

  1 network cards

  Bluetooth 2 controller

  3 network controller

  4 PCI simple communication controller

  5 SM bus controller

  USB 6 bus controllers

  7 Ethernet controller

  Hello:

  You should be able to use all the W7 32-bit drivers and software from the HP Probook 450 G0 on your model, except the audio.

  Your model uses the Intel HD graphics driver.

  DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5359407&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4052%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Audio: Accept the agreement.  Download and install the driver first on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• HP Pavilion 15-p031st: I could not find the drivers for Win7

  Hello!

  I could not find the drivers for win7. Except these things, my computer works perfectly with win7.

  BCM43142A0: USB\VID_0A5C & PID_216C & REV_0112 (I think it's a bluetooth driver)

  Unknown device: ACPI\HPQ6007 (I don't know, but it is a driver of Wi - fi button)

  Driver Finder online from HP could not find those too. I don't want to use win8 on my laptop because ı couldn't figured out. So please help as soon as possible...

  Greetings from the Turkey

  Hello:

  You need this driver for the 6007:

  This package provides the HP 3D Driveguard software (HP ProtectSmart hard drive Protection) for the laptop models running a supported operating system. HP 3D Driveguard protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp67280.exe

• Just upgraded to Windows 7 Pro. Could not find the normal system games (solitaire, spider solitaire,... etc.). Where are they?

  I have just upgraded to Windows 7 Pro.  Could not find the normal system of games (Solitaire, solitaire spider, mine sweeper, etc.).  Where are they?

  Go to control panel > programs and features > turn Windows features on or off and place a check next to games and click OK. Carey Frisch

• When I open my browser Google Chrome I get error "could not find the translation file:...\pivot.ini [WPCTRL95] does not work.

  Hello

  I have the same problem. The error message appears when I open my browser Google Chrome (Yes, only that browser). The full message is: could not find the file:...\pivot.ini translation [WPCTRL95] will not run.
  What kind of changes? As far as I know, I did not bring changes of lipids to my computer or programs. The thing is that I for a moment, and I don't recall the exact moment when it appeared.

  Hello

  Please take a look at the thread similar here with a solution as possible.

  I hope this helps!

• Retrieving error - could not find the path of the image... M:/RecoveryImage/install.wim

  So, I went out and bought the USB on the gateway site to restore this laptop again and when I tried to do, he says recovery failed - could not find the path of the image M:/RecoveryImage/install.wim.

  I contacted support and they issued me a replacement USB drive, I get the same failure.

  I diagnosed the HARD drive and it passes.  I used diskpart to 'clean up' the disk drive HARD all nothing doesn't.

  [Under the direction of privacy] order number

  What gives?

  Acupro1,

  I you sent a PM with respect to research purposes.

• Impossible to install XP SP3 (could not find the file specified)

  I looked at and followed the steps described in

  Article ID: 950717 - steps to take before you install Windows XP Service Pack 3
   
  I do not have

  • Microsoft Shared Computer Toolkit
  • Pack MUI Remote Desktop Connection (RDP) 6.0 (update 925877 for Windows XP)

  I tried to install SP3 with and without my Antivirus, Antispyware and firewall running programs (several times – 4, 5, or more).  Each time, I get an error staing "could not find the specified file."  Then after being told that SP3 can not be installed and that "Windows XP has been partially updated and may not work properly", I have to restart my system.

  I also followed all the steps in this article (Article ID: 950718 - how to troubleshoot an installation fails in Windows XP Service Pack 3) and still the same thing as above.

   

  I tried to download SP3 directly from the Download Center - same results as before.

   

  I started the BITS service and tried again - same results as above.

   

  I've disabled auto updates and removed to software distribution (download renamed folder as shown) - same results as shown above.

   

  I tried to restore my system to an earlier date - 4 these attempts using different dates and set points during the last wee - ALL have failed.

  I also tried the proposals 1 to 3 in this article (Article ID: 950249-how to remove Windows XP Service Pack 3 from your computer), and none of these steps worked.

  I spent over 8 hours today and yesterday a couple just trying to solve this problem and still don't get anywhere.  I am beyond frustrated at this point.  I know that say Windows can not work properly, and I need my computer to do my job.  Any help would be appreciated.

  You could do a repair installation with a CD of Windows XP with SP3 integrated already.  However, unless this is a new installation that you have installed SP2 on so you could get then SP3 installed on it - you have obviously been broadcast for some time without a lot of fixed security and tastes and your system could very well be stripped because of this.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 11 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you need to do before you install Windows XP SP3:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  Come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.

  Once the computer has been put by the top meat grinder (do it all, like data. even if you JUST did some of them) - download you ' HE Installer "SP3, save it to your desktop, restart and login as an administrator and run this file, following the signs.