Satellite A660 - 11 M - Memory Upgrade - problem

Similar Questions

• Satellite L10-117 and memory upgrade problem.

  I installed the module of ram kingston 512 MB dedicated for my laptop and my system does not start. Laptop does not see its partition with windows. I tried to salvage the dvd system and he does ' t help. Recovery is going ok but after restart problem is the same. I also tried to install this memory module 256 MB (factory installed), and then my black LCD screen and the computer won't shut down. Akku only delete help to extinguish.
  I tried all combinations of this module in the memory 1 and 2 location.
  I use 1.8 BIOS and there I see almost empty memory.

  Hello

  If you start the unit with the original just module becomes so everything ok?

• Satellite A660 - blurry fonts after upgrade IE9

  I have the Satellite A660, and when I've upgraded to the new version of IE 9 fonts are blurred in FB and some sites, very difficult for the eye.
  Toshiba hasn't aired new readers for Nvidia 330 M t be... any help appreciated.

  Hi wsb

  You're really amazing. I've been reading your posts and I m wondering really how anyone can have as many strange questions on the laptop. I have Satellite A660 almost 8 months now and I didn't notice a single problem.
  What you do with your machine?

  It is not easy to understand your question blurred fonts, but try to change the zoom for IE9 options or play around with other options.
  Have you noticed this problem with IE9 only?

• Re: Satellite A660 - no boot after upgrading RAM

  I just picked up 8 GB of RAM for my Satellite A660, CM3X4GSD1066 Corsair 4 GB PC-8500 (1066 MHz) 204 - pin DDR3 SO-DIMM RAM CL7.

  The system publishes end and the 8 GB appears in the BIOS, but once that his erases post and passes to Windows loading it stops on the black screen, the cursor blinks several times then it stops. I left for about 5 minutes and it starts through.
  Help, please.

  I replaced the 4 GB sticks and it works fine.

  Hello

  To me it sounds like it's modules are not compatible or have bad sectors
  As Akuma writes, these performance modules are risky in notebook because you don t have options to change the values of latency than on desktop computers. So, I always prefer to upgrade computer laptop RAM Kingston modules.

  But before that you buy other modules, try a BIOS update and load the default settings.

• HP Compaq 6000 Pro SFF: HP Compaq 6000 Pro Compact (SFF) - memory upgrade problems

  < <! UPGRADE MEMORY SHOULDN'T BE COMPLICATED! > >

  Chassis: HP Compaq 6000 Pro Compact

  Processor: Intel Core 2 Duo @3. 00 GHz

  RAM: 2 x 1 GB

  OS: Windows 7 Pro 64-bit

  I can add more technical info on request.

  Recently saved this PC of my friend tries to throw it. Everything is fine with the PC. It works perfectly and there is no material visible failure wihtin the PC either. He just bought a new and had no need for this one.

  Before turn me this into a House mutli-purpose server, I decided to upgrade the RAM.

  So I did some research and found this page: http://h10032.www1.hp.com/ctg/Manual/c01883661

  DDR3 240-pin DIMM 1333 MHz non - ECC, Max 4 GB per DIMM slot, Total Max 16 GB module.

  I went and bought RAM Corsair. Link to the product: http://www.corsair.com/en-us/cmv4gx3m1a1333c9

  I decided to get 2x4gb and upgrade later if I felt the need.

  I was happy to install in the PC. one in DIMM 1 slot and the other in the DIMM 2 slot.

  BEEP BEEP BEEP BEEP BEEP!

  I thought that maybe the slots are wrong, maybe they have to odd numbers then numbers.

  So I changed the RAM of DIMM 2 DIMM 3.

  Once again, the annoying ringtone.

  I even tried leaving just the 4 GB DIMM 1 and tried to start the PC, but nothing helped.

  I tried a lot of different combinations with the end result is 5 annoying beeps.

  After that I thought that maybe, just maybe, an update of the BIOS can change things.

  So I installed Windows 7 (I can't stand Windows. Arch Linux FTW) and performing a BIOS update.

  I then installed the new RAM again. Yes... frickin 5 beeps AGAIN.

  I am extremely disappointed at this point. I spent already $ 70 on a computer with free access.

  I read the forums here, but I couldn't find a thread with a solution for me.

  Is there anyone on this forum who could lend me a helping hand?

  Any information would be gladly appreciated.

  PS Please report any stupid error, I did. Stick and stones could not curb my bones.

  Hello:

  See this related post... the elite 8000 is basically the same model as the Pro 6000.

  Resources memory very finnicky needs...

  http://h30434.www3.HP.com/T5/desktop-hardware/memory-upgrade-for-8100-elite-CMT-with-TwinMOS-2x4GB-512x8/m-p/4918937/highlight/true#M95301

• Satellite A660 - how I overcame the problem BIOS Setup updated?

  I have a newish (Dec 2010) Satellite A660, brief model PSAW3E number, Windows 7-64 bit.

  TEMPRO tells me that there is a new update of the BIOS available. I downloaded the bios-20110124091612. However when I run the update fails. I have the redownload and try again and get the same error. The error is:

  A pop-up window and in the banner of the very high it states: installation UEFI Winflash 0.02. The error message in the window is:

  "There is an error occurred, please check below the elements."
  The version of the BIOS above 190.
  Battery capacity over 10%
  AC is fixed. »

  The only option is to select the "Finish" button

  Is that what is anyone able to help?

  Concerning

  Red kite

  Hi Red

  I n t have this model of laptop and cannot test BIOS update but I want to tell you that the update of the BIOS is not necessary if your system works well. If your system works well und stabile don t change anything.

  In any case, I hope that someone with the same model laptop can confirm this error happens on this model of laptop.

• Veriton M498G memory upgrade problem

  I'm trying to age 5 years Veriton M498G memory upgrade my son of 4 GB to 12 GB now when I upgaded to Windows 7 64 bit.

  The original 2 GB key still works fine and the 2 GB key that I added back a bit works very well too (4 GB total).

  But when I remove all the sticks and put in a new 4 GB stick the computer crashes in the POST just after the BIO 1024Mo of RAM (!). Looks like that the BIOS does not like the 4 GB stick! Compensation of the BIOS did not help.

  Back original memory makes the computer works perfectly.

  I am well aware of the memory manufacturer/type compatibility issues.

  I tried 4 different memory of 4 GB sticks from 2 different sources with no luck.

  My questions are:

  1. the Veriton M498G motherboard or BIOS has any limitation on the size of the memory card?

  2 I missed a setup or configuration to let the BIOS see the 4 GB memery stick?

  3. a more recent BIOS help? (the computer uses the original BIOS from 2011)

  4. is there a solution runs the endless trial and error of purchase and return of USB keys?

  The system is:

  Acer Veriton M498G

  Processor: Intel i3

  S/N: PSVAQ03005 *.

  MFG date: 18/01/2001

  Thanks for your help.

  Michaud

  [edited for the protection of personal information - please do post any personal or unique information such as but not limited to all names, email addresses, telephone numbers, full of serial numbers, etc.]

  Hello

  The crucial memory modules too.

• Satellite 2140cds MEMORY UPGRADE PROBLEMS

  I currently own a 2140CDS satellite with 32 MB of ram standard.

  I bought a module of memory of 128 MB (128 MB 144pin SODIMM PC100 3.3V CL = 2) of technology crucial to take my ram up to the maximum of 160 MB.

  When I install the RAM, the computer doesn't recognize it, and I get no error while starting the system, the system shows still 32 MB

  I had verified memory module and it works well, I had my slot memory computers checked to see if he had any problem with it. The computer and the module of memory seem to have no failure.

  Can anyone give me a hint or help to solve this problem.
  If I need to use memory from another provider IE KINGSTON

  Concerning

  Scott Bremner

  Hi Scott,.

  I suggest these two modules autour swapping or just use the new 128 MB module to the main location.

  Also, make sure that the modules of memory are firmly and correctly locked in place.

  The normal recommendation is to use only authentic RAM Toshiba modules, but personally, I use the RAM modules that I got from ORCA, so I don't think that there should be no problem with your crucial.

  HTH

• Satellite Pro 4300 - memory upgrade problem

  Hello

  I know that the issue has been already discussed several times, but it seems that none of the solutions or suggestions posted earlier apply to my situation.
  I recently bought an old Toshiba Satellite Pro 4300. The laptop has a slot filled memory of 64 MB module of the system's total memory was 128 MB.
  Because in my opinion, the system has worked to slow down, I decided to buy an additional memory module. I bought 128 MB - module TOSHIBA PA3005U k and placed in the slot B

  I was very surprised when I found that, after the upgrade, Windows showed that the total memory is 192 MB.
  When I put the 128 MB in the slot module is and the old module of 64 MB in the slot B - the surprise was even bigger, given that windows showed only 128 MB.

  I first thought that the slot B is defective, but in this case, it would be impossible to get in the first place the 192 MB. Then I thought that the new module of memory was either defective or it was 64 MB instead of 128 MB, but this option is also likely, according to my observations. Furthermore, I checked with EVEREST software system and it recognizes the new module as 128 MB module, but does not see the old 64 MB module.

  The situation is quite strange. Does anyone has an idea whay happens?

  Kind regards

  Sebastian

  To my knowledge, the 4300 Satellite Pro can be upgraded to 320 MB max.
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=5769&ft=m&St=3

  64 MB module which was fitted with your laptop should not be removable.
  So in this slot ONLY this 64 MB module could work properly.

  I know it's strange but the computer world is sometimes strange ;) you know :D

  Greetings

• Satellite C75-A-144 - Kingston memory upgrade problem

  Hello

  I recently bought a laptop C75-A-144 and wanted to do an upgrade with the bar of memory KINGSTON 4 GB (4GB 1600 Mhz DDR3 Non - ECC CL11 SODIMM SRx 8).
  Unfortunately, the laptop does not start with this module installed. I checked the module in the other laptop (differrent manufacturer) and it works well.
  Then... there at - it some compatibility problem with Kingston memory modules and model C75-A-144?

  In addition, because I really want to do this upgrade, can someone give me a list of the modules that will work with this laptop?

  Thanks in advance for your help.

  According to specification for laptop, that your computer can be upgraded up to 32 GB of RAM.
  Compatible RAM modules (verified by Toshiba) followed part numbers:
  2 GB DDR3L-1600-PA5104U-1M2G
  4 GB DDR3L-1600-PA5104U-1M4G
  8 GB DDR3L-1600-PA5104U-1M8G

  Check it please these part numbers and use them to order of RAM.

  In the past I ve used memory modules RAM Kingston for upgrade and there is no problem at all. Maybe you're trying to use Rams with different specifications.

• Satellite M50-165 memory upgrade problem

  Hello
  I realized that I bought a model that is only sold in Saudi Arabia. This is the model of Satellite M50-165. I want to improve the memory, I bought memory from EBAY who said it works in M50 sieries, but he did not.

  I read all the manuals in Toshiba, tried to contact by phone, they said that they do not have this model.

  in any case, I'd appreciate any help in that matter, as I am looking to upgrade the system to its full potential, I guess 2 Giga.

  This description of the model:

  Model name: Satellite M50-165
  Model PSM50E-0NX02JFC number
  MP 740/512 / 60 G 54/14WBT/DS2/LM/W
  Series No. 26271662 K

  It's memory, that I bought from EBAY dealer:
  http://CGI.eBay.com/WS/eBayISAPI.dll?ViewItem&item=120193991955&ru=http%3 A%2F%2Fsearch.ebay.com%3A80%2Fsearch%2Fsearch.dll% 3Ffrom %3 DR 40% 26_trksid %3 Dm 37% 26satitle %3 D 120193991 955% 26category0% 3D % 26fvi %3 D 1

  Please advice me!

  Hello

  you bought the bad RAM. You need DDR333/PC2700 memory for your machine (which is expandable to 2 GB). If you're lucky, then return/sell memory and buy a RAM with the specifications described above.

  If you still have some questions then just ask.

  Welcome them

• Satellite A105-S2051 memory upgrade problems

  Sorry for the huge block of text...

  This is not my computer, but a problem I need to fix nonetheless.
  I use a Toshiba A105-S2051 and I want to upgrade memory.

  When I have the original 512 and a 1024, it works perfectly, and I can move them to a port without problem.
  I also have a PNY 1024 that I can replace the other 1024 with and it works perfectly even in the two ports, but when I put the two 1024, it does not work (starts and stops quickly and repeatedly).

  Similarly, even if I let one of the 1024 in but remove the 512, computer does the same thing.

  Is the computer laptop for any reason + need + 512 to work?
  This is no logical sense in the PC world, but I have no idea on laptops...

  Hello

  Just a question: last chart shows an empty slot.
  Can you please check if the laptop works with all modules placed in this slot machine only?

• HP Envy 850-065SE: memory upgrade problem

  HP computer: Envy 850-065SE (memory 4 locations)

  Memory: G.SKILL RIPJAWS V F4-2133C15D-32GVR DDR4-2133 CL 15-15-15-36 v 1.2 2 * 16GB

  I just bought 32 GB (2 * 16) G.SKILL RIPJAWS V F4-2133C15D-32GVR DDR4-2133 CL 15-15-15-36 v 1.2 memory to upgrade my HP desktop computer (model 850-065SE of envy). My office has a HP mother 2B3A and i7 - 5820 k and HaswellE chipset. The memory of the plant is of Samsung brand with configuration DDR4-2133.

  When I replaced the memory of samsung (trademark) with G.SKILL ones, the computer cannot start with black screen. When I've switched back to factory memory, the computer is back to normal.

  That means G.SKILL RIPJAWS V 16 GB memoryis is not compatible with this HP computer motherboard? or upgrade the BIOS can solve this problem? or do I return these memory and get 8 GB * 2 instead? Your comments are much appreciated.

  This model is limited to only 4 GB and 8 GB modules in the slot.

  B21 HP

  CL15 - DIMMs, 4 GB, PC4-17000, 798033-001, DDR4 COMPLY_2.07

  CL15 memory - DIMM, 8 GB, PC4-17000, 798034-001, DDR4 COMPLY_2.07

  You can buy online modules of 8GB.  Look at the technical on this point.

  https://www.CDW.com/shop/products/Kingston-DDR4-8-GB-DIMM-288-pin/3912220.aspx#Po

• Satellite U840 10 m - memory upgrade

  Hello

  I don't know if I'm in the right place because all other threads are videos with a response, and it is a question. But if I'm not, please point me to the right place.

  I have a Toshiba Satellite U840 10 M with 4 GB of RAM and I want to move to 8 GB. Can someone tell me where I can find information about how to install an additional memory module?

  Thank you
  Gonçalo

  Hello

  You can use DDR SDRAM 4 GB modules III memory SO-DIMM 204-pin
  You can use the modules of DDR3 1333 MHz or 1066 Mhz
  But the speed of the memory depends on FSB (front side bus)
  If the FSB would support only 1 066 Mhz, 1333 Mhz modules would be clocked down.

  Upgrade is tricky, because all covered plastic at the bottom of the unit must be removed. His guarantee of 13 live. If you need to remove all 13 screws to remove the cover and access the memory.
  As far as I know you can lose the warranty, remove the cover and would therefore ask a technician to do this work for you.

• Satellite P100 - 160 PSPAAE - memory upgrade question

  Hello

  can someone tell me if it works in my Satellite P100-160
  Part number: PSPAAE-01D00UEN

  Kingston memory - 2 GB - SO DIMM 200 pin - DDR II
  Storage capacity 2 GB
  Upgrade to generic Type
  DDR II SDRAM technology
  Factor of form SO DIMM 200-pin
  Memory speed 533 MHz
  Verifying the integrity of data Non - ECC
  Latency CL4 Timings
  Features without buffer memory
  Supply voltage 1.8

  Thank you
  TREV

  Why not?

  Satellite P100 supports the DDR2 533 MHz (PC2-4200) 200-PIN SODIMM memory modules of the series.

  You can switch to 4 GB max.

  See this page:

  [Memory for Toshiba Satellite P100-160 | http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=28327&ft=m&st=3]

  You will find compatible module.