Satellite A660 - 11 M - Power Saver does not work

Similar Questions

• Satellite A660 - 11 M on Windows 7, Toshiba Power Saver does not work

  I have a Satellite A660 - 11M and I'm working on Windows 7 Ultimate

  The problem is that I download all drivers and updates but the toshiba power saver does not its installed without error and TPSLaunch (green icon) does not open when I click on it and no icon, I found in the control panel for the afterIi program do not install the package any added value!

  Under Win7, it works a little different. TOSHIBA Power saver is part of the advanced settings ower.
  Enter the power management you are using and click on advanced power options. There you should find Toshiba energy savings.

• Vista 32 bit Toshiba Power Saver does not work - Satellite L300 PSLB0E

  I have problem with Toshiba power saver - it does not work.
  I have not found a driver for Vista 32 bit here.

  Toshiba Satellite L300 PSLB0E-04R012RU VISTA HOME PREMIUM

  Thanks for your help

  Hello

  What do you mean with it does not work?
  What energy savings you used?

  The Vista operating system uses clean power options and there is no special Toshiba Power saver for Vista as for Win XP

  Maybe you tried to install the saver of energy for Win XP?

• Satellite A200 + Vista Ultimate - power management does not work

  No matter what I apply to the power management settings of the screen never goes and the PC never sleep or standby extended. Screen saver does not either - except once - yesterday, for the first time since I bought the PC in August. Has not yet done.

  I assumed that this is a bug in Vista. "Tech Guy" PC World (ha ha) cannot repair. Is it at the level of the BIOS or something else? Of course, there is an incompatibility between the OS and the hardware. Video chipset? If you choose a balanced power management, the screen slightly off if you take out the power cord, but that's all that happens. Power management is all set to default.

  It's exhausting, because whenever I want to leave the PC for a while, I have to put it to sleep manually.
  Anyone got any ideas?

  Thank you

  Peter

  Post edited by: admin

  Hello Peter

  First of all are the guys responsible for tech updates? They must offer that you support for the hardware you have and clarify also all problems, if you use a preinstalled recovery media.

  Upgrade is your decision, and it is possible that it may have some negative influence on the functionality of the OS. All this is quite complex. As you know Vista has own power management options. Toshiba install PVAT (ValueAddedPackage) and after doing this there are some additional settings.

  The question is: How did you get the OS upgrade? Did you do a clean install? Have you installed all the stuff from the download page of Toshiba including VAP?

  With other words: all the basic settings on energy consumption are defined in the BIOS. AFAIK in Vista is the management of clean energy implemented and Toshiba installed just a plugin. If these rudimentary BIOS settings are not changed, I guess everything works fine. Change the settings of the BIOS with an update, I can imagine that different settings will not work correctly.

  Hmm, that's really not easy to say what you can do. Maybe check for the last update of the BIOS and after doing that it is trying to put the clean install of Vista Ultimate. And, of course, you must install all the stuff from Toshiba following the document of instructions for installations.

• Satellite A660 - 11 M - brightness adjustment does not work after hibernate

  Sometimes, I find that you use F6, F7 to control brightness does not work. This only seems to happen after a fresh reboot, but after being out of hibernation.

  I am running Win 7 Home Premium 64-bit and using the latest NVidia driver (obtained from toshiba yesterday Web site): 8.16.11.8988

  A way to solve this problem?

  Hello

  From my own experience, I can say that all the FN buttons work perfectly after hibernation, standby, restart, etc.. No problem at all!

  I put t know what is the problem, but in your case would be to reinstall the package of added value and utility to Support Flash Cards. Two tools to control the FN key functions and can be downloaded from the official page of Toshiba.

  But before you reinstall it, remove older versions first. Then install VAP, restart and finally Flash Cards Support utility.

• Satellite L300 - wireless switch power switch does not work

  I installed XP on my L300 - 110 (PSLB0E), cause I don't like Vista. I installed all the drivers, and everything is quiet OK. But one thing little annoying me - wireless, switch, it does not work. So I can turn on Wi - Fi only by pressing Start-> connections and so on.

  I need help! Who can tell me, what driver or software do I need to install? Thnx a lot!

  Hello

  Do you mean the hardware switch on the side of the fron of the laptop?
  Normally this switch still works because he founded material s and must always be defined on IT if you want to use the WLAN and OFF to disable WLAN.

  Have you tested the switch on OS preinstalled Toshiba? Maybe it's a hardware problem

  Make sure that the latest drivers are installed!

• Satellite U400-12R: Toshiba Power Saver does not appear in the taskbar in Win XP

  I have some problems with the utility - Toshiba Power Saver on XP.

  After installation, the program is not displayed in the taskbar and when I stopped the operating system - it is an error with TPS.

  Windows xp sp2, the pilot of GST is taken from the official website of toshiba.

  Can someone help me?

  Hello

  I U400 and Toshiba Power Saver, I installed and it works great!
  Have you tried to install it again?

  You should do this!
  Remove the previous installed GST and restart the laptop.
  Then download the TPS right and compatible and install it again!

  Check it!

• TOSHIBA Power Saver does not work with the limited user account

  Hello
  This same question has been posted in 2006 - not by me - with no successful response. I try again.
  If you create a user with the account of restrictions (member of the local USERS group) under XP, it cannot manage or power options Windows embedded and the Toshiba Power Saving tool.
  I managed, working on the file and registry permissions, to have power options Windows works. But I can not yet launch the Toshiba Power Saving tool, it always skip - rises the box 'you have no rights. "

  Is there really anything I can do to work around this problem?

  Thank you

  Yes:

  Log in as administrator
  Run the Toshiba Power Saver
  Go to "configuration Options".
  Check "Allow Limited user to change settings"

• Satellite A660 - Broadcom internal wireless adapter does not work

  Hi all

  My first post to this forum - I have a new laptop of Toshiba Satellite A660 - only had for about 4 weeks and it turns out be a disaster for me...

  Firstly - I spend weeks getting everything on and configured as I want - then the hard drive begins to die...

  I just returned it service center Toshiba and NOW wifi has stopped working...
  Internal broadcom wireless adapter doesn't work - but according to windows and built-in Diagnostics it works...

  HOWEVER - when I try to use wireless with the built-in adapter may not detect all wireless networks...

  I then plug in my adapter netgear usb wireless backup and I can pick up and connect both of my wireless home networks...
  I am moving abroad in a few weeks and need to know that my laptop will work/be reliable and not have any problems-if anyone can help me with this, it would be much appreciated.

  John.

  Before starting the scan for available wireless networks you have activated WLAN card correctly?
  Orange is WHAT turned on WIFI?

• 10 TECRA, toshiba power saver does not work on vista

  I can change the options of the program of toshiba power saver 3.2.0 as cooling method (performance, max, optimized, cooling performance optimized battery) in the parameters Panel / battery /... or directly in the BIOS but
  -values in the bios and in the control panel settings are not interconnected
  -regardless of the value (in the bios and in windows settings), there is no noticeable change in the method of cooling with the fan speed
  -There is a warning message in the battery Control Panel, who said: the changes are not allowed with toshiba power saver program.

  You are logged as administrator? Maybe your user account is limited.

  Also update the BIOS with the latest version. You can download it from the Web from Toshiba website.

• Satellite A660 - 11 M: the display does not work with nVidia drivers

  Hello world.

  First of all:

  I use the default pre installed SB (w7-64) and nothing more is installed on it, except the toshiba software.

  The problem is that, while I use the default driver installed that everything works well, if I update the nvidia drivers, I can't change the brightness more.

  It cannot be changed by fn + f6/f7
  cannot change it in windows through "brightness".
  no change in the power management profile.

  (I can put different brightness levels, but nothing is happening!) (I hope you understand what I mean)

  the only way to do it is using nvidia Control Panel.

  even if use windows utility to update windows drivers download the same drivers and there is the problem.

  the only way to fix it is to reinstall the default driver.

  but I don't want to use the prehistoric driver!

  How can I do to fix this? is this a known issue?

  Thank you very much for your help!

  Hello

  Since the nVidia page nVidia drivers are not pre-tested and not certified by Toshiba, it s not recommended to use these drivers.
  You must use graphics drivers of Toshiba because the drivers are modified and created for the use of the laptop. These drivers support own device of thermal protection that protects the graphics chip.

  I think that the issue has nothing to do with the Toshiba FN button software because brightness can be affected, even using Windows 7 power management

  I recommend to go back to the original drivers Toshiba!

• Satellite A100: Toshiba Power Manager does not work

  Hello everyone!
  I just installed Vista on my laptop (originally I had Win xp on it)
  First I installed video drivers from toshiba.com
  Then I installed the bios update and additional package toshiba.
  But the toshiba Power Manager does not work!
  Vista uses only its tools to manage the battery.
  Can you help me?

  Thank you!

  Why do you offer the Power Saver doesn t work properly?
  You are getting error messages or what?

  The Toshiba for Vista energy saver is not the same as for Win XP.
  You can find some additional options in Vista power options!

  There, you can choose between 3 different power option.
  Choose one and click on the link below changes the power options

  The new window should appear and you can click on change advanced power settings link.
  In a new window, you can see the Toshiba Power Saver Settings.

  Good bye

• the light on the power button does not work. How can I activate it?

  HP pavilion dv7

  Windows 7.

  the light on the power button does not work. How can I activate it?

  If the key light is not lighting up, then more than likely that the LED is just out for your power button. If the laptop is still under warranty, you can it be repaired or replaced, but as long as its not causing you any serious issues, I worry too much with it.
  
  BRAVO is just a system we use to say thank you to informative messages.

• power adapter does not work

  I bought this point aprox. 9/10 months of Tesco, so I don't know if I have coverage?

  Printer all-in-one of HP Photosmart Plus - B209a

  power adapter does not work and I am loan owner hp printers and don't want to splash out on another.

  Help, please...

  Hello

  You should still be under warranty, but if not, you should be able to buy one from HP parts Surfer.

  I hope this helps

• Screen saver does not work properly

  My screensaver pc does not work properly.

  Hi NavjotChhina,

  ·         You get the error message?

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  The screen saver does not work on a Windows XP-based computer

  http://support.Microsoft.com/kb/916256

  Screen saver may not start in Windows XP

  http://support.Microsoft.com/kb/326719