Satellite A660-17F - no option "restore to out of the box.

Similar Questions

• Satellite A660/07R - what is supposed to come in the box?

  Bought an A66/07R today but it seems they gave me display stock. How can I confirm if everything is in the box? I was expecting at least a recovery disc or software.

  Recovery DVDs is not provided with laptops. It should be also described in manuals s user document. It is also described that you create DVDs of recovery only use preinstalled Toshiba recovery media creator.

  It is not as some disc of additional software. All software are already preinstalled and is part of the recovery image (recovery DVD).

• How to restore Toshiba NB250 to out of the box?

  I have a laptop Toshiba NB250-108, is a German keyboard layout if it makes a difference. I have no CD drive or the DVD software.
  I tried the system restore to out of the box several times with no luck, hold 0 (zero) button on start up, but only takes me to start modes.
  Any help would be thank you very much.

  > I have tried restoring the system to out of the box several times with no luck, hold 0 (zero) button on start up, but only takes me to start modes.

  try pressing f8 at startup

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

  If you can not start a recovery procedure, it means sth wrong with it (deleted/moved)

• Restore to factory state out of the box. Can I install all updates from Microsoft using Windows update or can I install antivirus first before to connect to internet?

  Restore to factory state out of the box. Can I install all updates from Microsoft using Windows update or can I install antivirus first before to connect to internet?

  Currently Windows Vista Home Premium SP1 x 86 (no patches since 2008). Currently, it has no AV and has not been connected to the internet yet. It will be behind a router.

  I had to redo the factory already reset after be connected to the net for 20 minutes and then a bunch of programs kept crashing saying Data Execution Prevention had to close the program StackHash and BEX error when executing update for HP drivers.

  Maybe I installed Kaspersky first next time?

  What should I do?

  Thank you!

  No problem. Install the updates. You can install the anti-virus later.

  Just don't start browsing the inet by updating.

• I had to do a full (out of the box) system restore. Before that, I did a complete backup of dvd by using Windows backup center and restore...

  Windows Vista 64-bit
  I had to do a full (out of the box) system restore. Before that, I did a complete backup of dvd by using Windows backup center and restore. I'm now trying to restore my files however, I get an error message that says the missing user account... "files that you are restoring have security permissions to a user account that is not found on this computer. The missing account is shown below... Dad-PC\ADMIN."the problem is, that a user account name cannot contain the"------"what to do? Thanks in advance!

  Hello

  at the end of my 1st response is a link to the appropriate forum for these questions

  If you have problems, it's in here is a forum for microsoft at the link specifically for backup questions below

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• NB250 restore out of the box after upgrading Win8

  Hello

  I have improved my NB250 Notebook for windows 8 (it came with windows 7 starter).
  Now, I want to go back to the out of the box again with windows 7 starter.
  The manual said to do I need to press the 0 (zero) key all turning on my pc. (I did before once).
  http://support.Toshiba.com/support/staticContentDetail?ContentId=2728214&isFromTOCLin k = false
  Page 49.
  Now when I press 0 simply freeze the first toshiba screen and has no effect until I have unlock the key.
  I suspect its power because I installed the windows 8.

  Can someone help and find a solution?
  Is it possible to manually run the toshiba recovery software?
  Or maby a way to recover the disk storage internal in another way?

  Thank you
  Dolev

  Hello

  I don't know if your note is a US or European but manual model displayed must be the American version.
  In any case, its operation is quite similar.
  Laptop comes with preinstalled OS (recovery image) also saved original recovery image on the HARD drive.
  If long HDD is not defective and laptop to factory settings you will be able to install the HARD drive recovery image.
  If you check this page 56 s manuals, you can see explanation and detailed instructions how to create a recovery media (USB) that you can use if the HARD drive is faulty or the installation of HARD drive recovery won start t (your situation).

  I presume you didn't create this recovery USB support so now you have a problem. After your own installation of OS version your NB does not have factory settings anymore and you will not be able to access the recovery image recorded and the ability to boot the recovery image installation. Only way to have once again is installation of recovery using recovery media image.

• Cannot start Satellite L500 - new out of the box

  Help!

  Just the laptop out of the box (new) - lit.
  Windows 7 Administrtaor account is locked and another user will not recognize the password / name.

  Help!

  Hello

  Try this:
  Switch on and press F8.
  Select repair my computer then HARD drive recovery.
  Drive recovery HARD should restart and you should be able to reinstall the OS.

  Good luck

• Toshiba satellite L755-S5170 how to recover out of the box state

  How to get out of the box state. I know that it will not be that difficult, I had products HP which makes this task easier!

  Moved to windows

  Hello

  Regarding your question, it is out of our reach and you can contact your computer manufacturer.

  Thank you.

• Slow... Right out of the box - HP ENVY 15t, w7 pro

  Build is below.

  I've had this laptop since end of August 2014. He soon right out of the box. Technical support has been of little help and suggested that I needed a HP service called Smart Friends. At a cost that is an option I did not wish to engage with a laptop that was only 3 weeks at the time. I called tech support twice on this slow condition, they escape to the frustrating and boring.

  I created an operating system/repair disk and restore as one point of my first orders of operations by getting this laptop. Those who have not helped. The purpose of this laptop is strictly for use when travelling to which I've not yet done. I guess I could have a total of 5-6 hours of use on this computer. My HP desktop computer is my main computer.

  For example, in MS config I have which where only 3 vital elements are checked and it still takes 75 to 80 seconds of power to display the windows desktop. It takes 40 seconds to load control panel if you click on it, I get the blue wheel. I created a unique 26KO word doc. When I click to open, I get the blue wheel that is opening the document. It is simply not true. I spent more time troubleshooting this new laptop to use it for its intended purpose.

  I thought about safe mode or a clean boot. I don't have to. I did a system restore and a clean install once already.

  Schedules:

  -Microsoft Security Essentials

  -Office 2010 about 6 weeks after taking possession.

  -Malware Bytes

  Again, it was slow, until I loaded one of these three programs on this laptop.

  It's with or without being connected to the internet.

  I need an original system disk if all the one I created is just a mirror of what can happen?

  Clues that performance results did not appear my search on?

  Thank you...

  SID

  HP ENVY - 15 t

  • Windows 7 Professional 64
  • 4th generation of Intel Core i7-4710HQ Quad Core + Intel HD Graphics processor 4600
  • 15.6-inch diagonal backlit WLED Full HD (1920 x 1080)
  • System of 8GB DDR3L (1 Dimm) memory
  • 5400 RPM 1 TB hard drive
  _________________________________________________
  past anda berbicara bahasa Inggris yang jelasi ringkas dan?

  Hi @Eurosid

  I just sent you a private message. If you are unsure how to check your messages on the forum this post, has instructions.

• Reset the computer at a point "out of the box.

  Hi my name is felix
  I need to know how to restore my computer to a stage 'out of the box. a restore point will not help because I created a restore point when I had problems.
  Thank you...

  Obtaining recovery Vista Media and/or use the Partition Recovery Vista on your computer, to return to the factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  Mick Murphy - Microsoft partner

• A wi - fi network reset to "out of the box.

  Hello

  Sorry to ask what may be a very basic question, but how do you define a wireless router - more WiFi settings of your laptop - back to the way they were when they came out the box? In other words, I want wireless and portable routers that I forget they know so that I can set up my wireless network again as if I put for the first time.

  The reason is a little involved, but for the most part, I had a set up wi - fi network and launched from a Terminal Airport Express and it worked very well. During the holidays I then bought an Airport Extreme because I wanted something a little better for my base unit and then I wanted to use the Express as an Extender. How I wanted to now, I had not tinkered with something that was not broken, as the addition of the extreme for the network was not as simple as I was expecting and my wi - fi network everything seems to go wrong, like my internet connection. I had someone to configure two routers (understand I can I have messed up a setting when I was trying to implement) but still no luck - he would work for a bit and then my internet would just go down. Using Airport utility, showed that routers and internet will run for a few seconds and then would stop and I would lose the connection.

  I work and live on a college campus for the internet at home is powered by an ethernet into the wall jack, just as you would in an office. Through contact the COMPUTING helpdesk, they managed to tell me (although partly because of techno speak and a little bit of a language barrier that English isn't the first language here) I got away from. What I could gather was something like the two routers SSID must be different because they were "beating" and this caused the network to automatically shut down at home? Unfortunately they treat only to provide internet service home and cannot help with the problems of wi - fi.

  I am pursuing other means to help (we are a University of science and technology research, after all!), but something I thought was if I could just reset routers and WiFi my laptop 'memory' of the network and start over as if I was there for the first time. I don't want to plug the router and it says something like "this was part of the XX network."

  Anyone know how?

  Thank you very much

  To configure your router from Apple to its "out-of-the-box" configuration, you must perform a ' default ' reset on this subject.

  For the laptop, if it's a Mac, then you will need to follow these steps for "erase it."

  Start with the first steps (1 - 1). If that is not accomplish what you're looking for, go to step 2.

  1a. remove preferred networks

  System Preferences > network > Wi - Fi > advanced > tab Wi - Fi

  Under "Preferred networks", delete the networks you use regularly in the list.

  1B. Airport deleted keychain entries

  Launch the application "Keychain Access", located in Applications/Utilities.

  In the windows on the left side: Select login for keychains and "All items" category.

  Click on the 'Genre' filter at the top and search all "AirPort network password" entries... and remove them.

  1 c. Add Network favorite (s)

  System Preferences > network > Wi - Fi > advanced > tab Wi - Fi

  Add preferred networks using the button «+»

  Restart or disconnect you, then back in.

  2. move the System Configuration files

  (Note: you will need to restore your network connection settings.)

  Go to Macintosh HD/Library/Preferences

  Move the SystemConfiguration folder on the desktop.

  Restart your Mac. (Note: OS X will rebuild the folder & files that are now sitting on your desk in the library > location of preferences.) If this does not resolve the problem, you can move the folder back to its original location.)

• Reset to out of the box

  Bought one out of the box from HP all-in-one of Cosco.  In the name of the previous owner and files.  Do not have the administrator password.  How can I reset?  Or should I return it?

  Hello

  Try to do a "factory Reset" by pressing the f11 button as soon as you turn the machine to run Recovery Manager - for more details, see the link below.

  Recovery options - Windows 8

  Recovery options - Windows 7.

  Kind regards

  DP - K

• When I send an email on Outlook Express, he won't out of the box shipping, but continues to send once a minute until I remove in the Outbox.

  When I send an email on Outlook Express, he won't out of the box shipping, but continues to send once a minute until I remove in the Outbox.

  You have apparent dbx file corruption.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• The remote control comes charged out of the box or it must first charged?

  The remote control comes charged out of the box or it must first charged?

  It is usually quite busy, mine was about 85% when he arrived. It's a question about the pre purchase or you have a problem with your remote control works not.

• Minor scratches on SS 2 series out of the box

  I am very happy that my watch stainless steel series 2 has been delivered today! Hope you are all enjoying your. After an inspection of the watch, however, I noticed very slight/minor/extra fine scratches on the screen, mainly on the top and the bottom of the screen where the curve begins, but also a bit in the middle. Once again: scratches are very minimal and is only visible when shine your flashlight of the iPhone (or any other light RAM) directly on the screen and looking closely in some angles. It seems that this has happened during production, probably during some polishing of the watch or other routines (because the stripes are mainly on the curves of the screen and pointing in the same direction). Really in trying to decide what to do about... Some of you SS series 2 owners would be so good to check that out and let me know what your watch in bright light looks like? Once again: it is very difficult to see if you need to use your iPhone light therapy lamp or other direct light source. I read a few threads on the coating that was applied to the screen (also described in the manual). Some suspect that this coating scratches easily, however I think it is strange that the watch is delivered striped out of the box. Especially since this Sapphire screen must be very hard to scratch.

  Make an appointment at the Genius Bar in Apple for the service. If you need a Apple Store - find a store - Apple. Take it within 14 days from the date of purchase for Exchange do for a not scratched. We cannot help you here, and these forums aren't complaints because Apple isn't here. We are all of the users like you.