Satellite A660: After upgrade to Win 8.1 BSOD is displayed using the keyboard

Dynabook i7 3D laptop A660.

OK; so I updated my i7 3D Dynabook to form 8.1 Windows (x 64) Windows 7 (x 64), and now the laptop restarts everytime I start to touch the keyboard.

Other wise works perfectly.

It took me two hundred hours to understand that I was typing on web sites usually when this re-boot occurs. And I could not remember how or why the computer restarted.

When I press the numeric keypad 'more' sign, I get the BSoD immediately. But there are a few presses of the numbers on the keyboard so he can do the same thing.

I.E.
If I press 1, 2, 3, its ok.
But
If I press 1, 2, 3, 4, 5, 6, 7, the laptop gets a BSoD and restarts.

I also installed automatic software (mouse) for a Microsoft mouse, that I was going to use. and I deleted in the "System Properties" after the problem has arisen; but there is no change.

Whenever I tap on the number pad (especially the plus sign), the PS stops with a blue screen of death BSoD.

Any ideas?

Hi Roger,
My knowledge the 8.1 Windows isn't supported by Satellite A660 because there is no driver Windows 8.1 special to this series of portable, but even if these drivers have not been released, is not a big problem to install and run the Windows 8.1 on this unit.

I m wondering how you installed the 8.1 to win on this laptop?
You upgrade Windows 7 to 8.1 Win or were you running a fresh install of Win 8.1?

Here's a nice page of Microsoft providing some FAQ about update for Windows 8.1
[Windows 8.1 update: FAQ | http://windows.microsoft.com/en-US/windows-8/upgrade-to-windows-8]

In case you have done an UPGRADE to 8.1 Win, you can use Windows 8.1 Upgrade Assistant to check if your programs and devices are compatible with Windows 8.1.

I would be also interesting to know if the same BSOD would appear if external keyboard would be connected to the laptop.
When using the external keyboard would cause NOT of BSOD, I guess internal keyboard is faulty and could be the troublemaker.

Tags: Toshiba

Similar Questions

  • Satellite L30 - after upgrading RAM OS crashes and BSOD is shown

    Hello!

    I would like to know what is the problem on my Toshiba Satellite L30 series (PSL30L-0MOOD) because I have installed my RAM of 256 MB 1Rx16 PC2-4200 s-444-12 to an Apacer 2 GB DDR2 667 mHz... All of a sudden my windows crashes and displays a BSOD (Blue Screen Of Death) and just restarts.

    I need help because I think there may be a problem in my RAM upgrade... Thanks for the help guys!

    Hello!

    You only use the new module of RAM or both?
    If you use both, try again with the new module.

    In your case I would test the RAM with special programs like Memtest86:
    http://Memtest86.com/
    Download and burn it to a CD and then boot from it.

    Good bye

  • Satellite L755-M1M3 driver sound problem after upgrade to win 10

    Salvation;
    I have problem with audio driver Toshiba Satellite L755-M1M3 after upgrade to win 10, the sound does not normally work in YouTube or Facebook even when I play the video files from my computer it is dug into the sound or noise goes, I update the driver but not help, can you help me please, I have Toshiba backup files how can I restore it?

    Inability of Toshiba to make the solution, always shocks me. !!! ???

  • Satellite M840 - no upgrade to win 8?

    M840 satellite is not in the list cell phones supported upgrade 8 Win.
    But research has shown that the drivers support.

    Where ican are they?

    ?? LP, me please!

    Hello

    On the page of the Toshiba UE driver you can find Windows 8 for the Satellite M840 PSKFJV pilots.

  • Latitude E5520 Audio problems after upgrade to win 10

    I have audio problems after upgrade to win 10 64-bit.

    Dell Latitude E5520 IDT 92HDxxx HD Audio
    Hardware ID:
    HDAUDIO\FUNC_01 & VEN_111D & DEV_76E7 & SUBSYS_1028049A & REV_1001
    HDAUDIO\FUNC_01 & VEN_111D & DEV_76E7 & SUBSYS_1028049A

    (1) if I use the built-in driver to Win 10 ("high definition Audio Device") I hear speakers/headphones and switching between the speakers and the works of helmet very well but my laptop computer microphone does not work ("not connected").

    (2) if I use the latest Dell driver (IDT 92HDxxx HD Audio Driver) I hear initially via speakers, but as soon as I plug in headphones I can't switch back to the speakers (i.e. switching between the speakers and the headphones does not work) and my laptop computer microphone works.

    I would be happy to provide more information and help to debug.

    To a Microsoft Community Forum, I received the following reply from Rob Brown - Microsoft MVP:

    *************************************************************************
    Hello
    AS OEM Dell is responsible for the good operation of the equipment both
    and Windows. Check their documentation online with Dell Support, and
    drivers and ask questions in the forums about known problems. Make sure that you are
    Run the latest version of the BIOS, chipset and drivers.
    I hope this helps.
    *************************************************************************

    I understand that the Latitude E5520 does not appear on the Dell "Computers tested for upgrade to Windows 10" list... However I was hoping maybe Dell could find in the goodness of their hearts to a updated driver IDT 92HDxxx... pretty please?

    Thank you
    John D.

    johnsdagg
    AS OEM Dell is responsible for the good operation of the equipment both
    and Windows.

    Hi, John. It's quite nervous of a member of the MS forum say that Dell is responsible to operate Windows. It wasn't Dell but MS who claims that Win10 has most of the necessary drivers and if not then the drivers Win7 and Win8.1 would work.

    johnsdagg
    I was hoping that maybe Dell could find in the goodness of their hearts to a updated driver IDT 92HDxxx... pretty please?

    I doubt that it is possible for two reasons. Dell went from IDT Realtek as the audio seller so probably not more a a contract with IDT, if IDT even exist anymore. A year ago IDT was acquired by another company. I do not know its current status, but it is sure that the acquiring company will not be upgrading old software IDT. Reference Dell itself does not write the audio drivers. Even when IDT was the seller I believe that Win7 drivers are the final versions - no version 8 or 8.1 I think.

    johnsdagg
    If I use the built-in driver to Win 10 ("high definition Audio Device") I hear speakers/headphones and switching between the speakers and the works of helmet very well but my laptop computer microphone does not work ("not connected").

    The native Windows audio driver can't stand struggling external mic. It is a MS 'known problem '. MS must implement a decision-making support, but there is no indication that it will be. Meanwhile, you have two workaround solutions. You can switch backwards between the natives and the IDT drivers. At some point Win10 could leave the IDT driver works correctly. Or get an outlet cheap usb audio to the microphone. Struggling running out-audio driver usb Windows native usb and so dependent no driver IDT.

  • HP 15-ac000: Recovery manager does not exist after upgrading to win 10

    Hello

    I recently bought this laptop and had a free upgrade to win 10.

    Now I found the HP Recovery Manager is missing, and I guess that all of the other HP app no longer exists.

    How can I get these dos applications?

    Thank you.

    Peter

    The link in my previous post gives instructions on how to unlock Recovery Manager.

    What you need to do is:

    1. open 'C:\Program Files (x 86) \Hewlett-Packard\Recovery Manager' in the file Explorer.

    2. right click on Rebecca.exe (recovery program) and click "copy."

    3. paste it on your desktop.

    4 unzip this download http://www.fluxbytes.com/software-releases/fileunsigner-v1-0/

    5. drag your copied version of Rebecca.exe on FileUnsigner.exe

    6. right click on Rebecca.exe on the desktop and click "copy."

    7. paste in 'C:\Program Files (x 86) \Hewlett-Packard\Recovery Manager' and say yes to replace the existing file.

    8. search "HP Recovery Manager", click on it and a prompt will come, click 'Yes' and it should open.

     

    You can repeat this for other programs that are blocked. Basically, it removes the obsolete certificate which prevents opening in Windows 10.

  • Satellite A660-133 - Vibrations when I use the keyboard or a touchpad

    Hello
    I have a Satellite A660-133, when I use the keyboard or the touchpad I can hear a lot of vibration from the stop of the laptop. I think that this is not normal, but actually the same model showed in the shop does the same thing. What do you think about this?

    Is there anyone who has this model and who is able to tell me what is its experience in this respect?

    Thank you!

    Hi davmat,

    I m not Satellite A660 owner, but a friend told a. He never spoke to me such a problem expect that s a great notebook with powerful hardware and he likes the design. I agree with him that s a great notebook from Toshiba!

    Anyway, if you think that it of not normal, you need to contact a service provider authorized in your country. Guys can check this problem and maybe you need a new keyboard, but this can be exchanged under warranty.

    You can find a list of aspic here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

    Good luck! :)

  • After upgrading to Snow Leopard 10.6.5 most of the files does not open in CS3 Rosetta, grayed out menu items

    After upgrading to Snow Leopard 10.6.5 most of the files will not open in CS3 and more menu items are gray,

    like "Photoshop" and "quit Photoshop. I have to force it to quit. Don't know what version of CS3 since 'about this Mac' is not available.

    But CS3 runs in mode of "Rosetta". I had done this years ago, my scanner would work.

    I don't remember how I managed to do run in Rosetta and don't know how to do so he could operate normally, if necessary.

    Change the name of the file or the plugin to have ~ as first character will prevent it to be loaded.

  • Is there a later patch that will allow face with XP + SP3 Win 7 to XP to display on the network map?

    WindowsXP-KB922120-v5 - x 86 - ENU.exe

    I recently tried to install this update WindowsXP-KB922120-v5 - x 86 - ENU.exe on a XP Home SP3 system http://support.microsoft.com/kb/922120/en-us + so that my Win 7 PC could properly recognize the XP PC on the network card. I saved the XP HD package and then he ran, but he advised that my XP system is a newer version and so the update was unnecessary and not installed. The network is wired, and both systems can see well that there are certain permissions I need to sort out the XP PC to access files Win 7. I tried to solve KB922120 by reading the online forum and have read most of the questions but no remedy to this problem.
    Is there a later patch that will allow face with XP + SP3 Win 7 to XP to display on the network map?

    Hello

    I suggest you to see link below and check if it helps.

    http://Windows.Microsoft.com/en-ID/Windows7/why-are-computers-missing-from-the-network-map

    (For Windows XP)

    Hope this information is useful.

  • We had WIN XP pro on a computer, but then uninstalled and installed Win 7. We can now use the uninstalled version of Win xp Pro on another computer? Key # {redacted]

    We had WIN XP pro on a computer, but then uninstalled and installed Win 7.  We can now use the uninstalled version of Win xp Pro on another computer?  Key # [redacted]

    The game, December 23, 2010 17:32:06 + 0000, Billy2b wrote:
     
    > We had WIN XP pro on a computer, but then uninstalled and installed Win 7.  We can now use the uninstalled version of Win xp Pro on another computer?  Key # [redacted]
     
     
     
    Since you posted your product key on a public web site, it has now
    almost certainly already been copied and used by hackers all over the
    world. This means that Microsoft disables this button so it can't be
    more used.
     
    Please, in the future, never publish your key like this.
     
    But leaving that aside for the moment, to answer your question, if
    It is a key to the retail sale, Yes, you can use it on another computer. If it's a
    OEM key, no you can't.
     

    Ken Blake (MS-MVP)

  • my pc by using the keyboard and mouse of windows7 freeze after 20 minutes of inactivity

    my pc by using the keyboard and mouse of windows7 freeze after 20 minutes of inactivity

    Hi paulbartolotta,

    Welcome to the Microsoft community. According to the description of the problem, the keyboard and the mouse gel. Provide the following information:

    ·         Did you do changes on the computer before the show?

    ·         You get the error message?

    ·         What is the brand and model of the keyboard and mouse?

    I'll help you with this problem. I suggest you follow these methods.

    Method 1: Run the tool and troubleshooting hardware devices.

    Method 2: Try to use the mouse/keyboard to a different USB port and verify.

    Method 3: Try using the mouse/keyboard on a different computer.

    Method 4: Update the latest drivers/software for the mouse/keyboard.

    Updated a hardware driver that is not working properly

    I hope this helps. Let us know if you need help with windows.

  • Hi, I think to upgrade my CS5 to CC. Can I use the software on my desktop and my laptop on a license?

    Hi, I think to upgrade my CS5 to CC. Can I use the software on my desktop and my laptop on a license?

    Yes. It's no different than with perpetual license types.

    Mylenium

  • I have only the trial version of adobe after effects cc but is possible that I can use the plugins on this?

    I have only the trial version of adobe after effects cc but is possible that I can use the plugins on this? Specifically trapcode particular cc

    The trial version is any different from the full version, except that it works for 30 days.

  • C850-A797 - Bluetooth driver satellite does not work after upgrade to win 10

    My laptop Satellite C850-A797 upgraded to windows 10 last week and Bluetooth driver not working since upgrade,

    I installed the battery Bluetooth for windows ver.9 but it also does not work.

    can someone help me with this please?

    C850 satellite is not listed as a book of 10 Windows compatible.
    This means that Win 10 drivers are not available for this unit.

    In any case, I recommend you to go to Device Manager and remove / remove Bluetooth all the partners of the devices and entries.
    In the view of mark tab also the option Show hidden devices in order to get the big picture complete.

    Now after reboot, win 10 must search for removed devices and drivers missing.

    I hope this could solve your problem of BT.

  • Satellite C660 stuck in an infinite loop of BSOD after upgrade to win 10

    Wow what a disaster, this is a machine under windows 7-32 bit Satellite C660 PSC1GA-01E01M stuck in an infinite loop of BSOD.

    The lappy said that it was ok to upgrade to windows 10 so... Yes, I did.
    Now its stuck in a loop without end of BSOD.

    So I decided to use the recover option and reinstall windows 7 and then move from there.
    After mega downloads updates and finally got to the stage where there was no update on the left to get, so I decided to upgrade to windows 10 even once.

    Now stuck in an endless loop of BSOD again.

    Can someone point me to the driver who is a failure, I can get into SafeMode ok, Device Manager has 2 problems

    (1) is under OTHER DEVICES is an unknown device
    (2) is generic pnp monitor

    I tried from Toshiba Web site for updates of drivers for 32-bit windows 8 thinking this could be the best step but the links are bad and the page Web said sorry loser at home...

    Also no network, if I try to logging for the safe mode with networking, he returned to the screens of BSOD...

    HELP PLEASE

    Toshiba has released a list with all Toshiba models supported for upgrading to Windows 10
    http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

    Satellite C660 PSC1GA is not in the list, which means that this model is not supported to win 10 and will not get win 10 drivers.

    However the Win 10 must run on this device, because it meets the essential physical requirements.

    I guess the BSOD loop arise due to some drivers which are not entirely compatible Win 10 and probably these drivers must be removed before making the Win 10 update.

    To check the compatibility follow this procedure:

    • Right-click on the icon 'Get Windows 10' (on the right side of the taskbar), then click on "Check the status of your upgrade".
    • In the app to get Windows 10, click on the menu: (3 lines) and then click on "Check your PC.
    • Now you should see the list of compatibility issues

    Also this kind of problem could be fixed by Microsoft update, as mentioned in this article:
    http://www.Forbes.com/sites/amitchow...s-reboot-loop/

Maybe you are looking for

  • No sound/audio in MP4 files

    Hi hoping someone here can help out - I use El Capitan 10.11.6 and the audio is missing some MP4 files that I downloaded from a GoPro camera. My sound is fine otherwise, output noise is fine, alert sounds are fine. MOV files off other cameras play we

  • Very slow download speeds

    I just bought a macbook 12 "that I love. The only problem is I noticed very slow download speeds when downloading apps. I have also a 13 "macbook pro that I use on the same internet connection and downloads very quickly.  I have not tried to download

  • The print options window

    I have front ("main.vi"), there are graphs, graphical palette, two stamps, two channel control and button 'print '. After the press 'Print' button, there is a new Panel ("Print option.vi"), the user can put a few print option (in block I use the page

  • TDMS write memory and VI a remake TDMS API - LV2009

    In June, I posted a question about a memory problem with TDMS write (LV86). - TDMS write memory leak TDMS write memory works similarly in LV 2009? LabVIEW creates a growing buffer to contain the index with each entry?What is the format of the API of

  • Windows 7 same thing updated every day

    my computer keeps updating the same thing again and again every day its never done this and I begin to feel that something is wrong, they are: A security update for .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Window