Satellite A660 BIOS update link does not work

Similar Questions

• Re: where download update BIOS - toshiba link does not work!

  Where to download the latest version of the BIOS for U500 PSU5EE?
  On the toshiba page link does not work!

  I need the latest BIOS because I installed Windows 7 64-bit and sometimes I get BSOD and selfrestarts - event ID 41 63 task category - PC, and I discovered that there is possible problem in CPU that is not fully 64 - bit compatible and update of the BIOS might help solve this problem.

  When I click to download the link, it shows me: 404 - Not Found.

  In my view, there is a temporary server problem. Wait a few moments and try again. Sometimes it happens

• HP compaq dc7700 minitowers: BIOS update exe does not work

  I have the HP compaq dc7700 with mother 0a58h HP. I currently have the installed Intel e6400 CPU, but I have the Intel core 2 quad q9550 carrying around and based on the official list of HP upgrade that must be supported. So I put it (it was on the right track) but the only thing I got was 9 beeps of equal length. So I thought it was just that the BIOS update. I went to the drivers/software section and downloaded the update of the BIOS (from 01.15 to 4.02 or something). So I followed the instructions and extract the file. Then I opende the flash.pw file but it does not open! He repeated to me that I need the 32-bit or 64-bit version. I have 64 bit. I tried both and did not work. I downgraded to Windows 7 and did not work.

  But then, I thought the q9550 CPU uses 95W but the e6400 only 65W, but there should be no problem because he has on some power just do nothing I guess.

  Maybe I need to put it on a USB key?

  Please help me. Thank you

  Hello:

  The Q9550 is not certainly supported in the dc7700.

  The dc7700 won't work any processor with a FSB of 1333 MHz.

  The best you can do in this machine is the E7600, and he needs a 3rd party program until the multiplier.

  I've heard stories that someone installed the Intel Core 2 Quad Q6700 (2.66 GHz, 8 MB L2 cache, 1066 MHz FSB)

  Here's the problem with the file you are trying to install.

  This is a BIOS utility, not a BIOS update...

  The drivers have been completely erased from the HP support site.

  HP have a major problem with good number of pilots for hundreds of business PC.

  I don't know how they're going to solve this problem, but they have better.

  It's been weeks that these drivers have disappeared.

  I reported the problem 2 weeks ago and all they told me is that they are aware of the problem.

• Satellite A660 3rd party WLAN does not work

  Hello

  I had a problem with my WLAN adapter so I used to replace.
  Currently, I have installed card Broadcom Dell Wireless 1397.
  It has been defined by Device Manager and drivers have been installed.
  But it is impossible to turn on the WLAN.
  When I click the buttons activate WLAN, it just back to the OFF position.
  I also use Windows 10.

  Thanks in advance!

  Hello

  I own Satellite A660 - 16 M. Initially, it was equipped with Broadcom BCM4318 WLAN card. I decided to replace it with an Intel Centrino N-6230 dual band with 3.1 Bluetooth card. Replacement process was fairly easy, the problem was to make the new card working group. I use Windows 10 as an upgrade to Windows 7 Home. As you can imagine that the utility flash cards stopped working after the upgrade of the system, but Windows 10 has managed to cope with BCM4318 since the original drivers and Windows 7 registry entries have been always working in the background. The WLAN button above the keyboard worked, was so orange the LED in the front of the laptop.

  Situation changed completely with the new Intel Centrino 6230 N WLAN card. Despite he properly recognized by device with all the necessary drivers automatically responsible manager, I was unable to have the WLAN button and the LED orange work which is to turn on the radio (the card WLAN itself, its possibilities of wifi). The weird part is that the Bluetooth worked without any problems.

  The solution was to put a small piece of electrical tape on the 20 PIN of the new WLAN card to prevent WLAN DISABLE State presented to the motherboard. So RADIO WLAN is always on, so Windows 10 own wifi tools were able to switch on the WIFI network and... I see now all (2.4 GHz and 5 GHz) wireless networks. Of course the WLAN button and the orange LED still haven't work (it seems that it is somehow hardcoded to support only the original BCM4318) but I don't love about it. The most important is that I'm now a lot more capable wireless network inside my laptop card.

  I hope that the solution above works in your case, 8stack. Watch the attached files to see what she looked like, as in my case.

  Best

• Re: Satellite A660 - FN + F1 - F9 does not work after hibernate

  This problem often occurs when my A660 went from hibernation mode, and sometimes in normal situation
  It can only be fixed by a reboot of the system, I checked the application of Flash cards and it's work and I still can use it instead of the FN key
  also in this case I can always use FN or FN + 3 and 4 to increase or reduce the noise but is not workig at all with the function keys 1-9, until the system is restarted

  Hello

  In button start-> all programs-> Toshiba, you will find the Support of Flash memory card utility.
  You can restart this Flash Card Support utility if the question would never happen again.

  Perhaps you also need to reinstall this utility Support Flash Cards order to check if it would help to solve this problem,

• MSN now social api link does not work

  Https://support.mozilla.org/en-US/kb/add-social-features-your-browser MSNnow link does not work for me. Is this a problem by msn or make a mistake here?

  Hi, unfortunately MSN announced that it may have been discontinued. You can see the discussion for the here as well https://support.mozilla.org/en-US/kb/.../5198

  This has been updated and we are sorry for the inconvenience.

• HP ENVY 17-n013na: the Legacy BIOS boot option does not work

  Support dear HP team,

  I recently bought for laptop HP ENVY 17-n013na .  It came with Windows 8.1. I have to install Windows 7. Unfortunately, the legacy in BIOS boot option does not work for me. Here is detailed information:

  BIOS version: F.04 Rev 5.0

  I tried updating to the latest version of the BIOS on the Support site.

  To activate the option to boot legacy, I followed the following steps:

  • Entered, BIOS configuration utility
  • Go to the System Configuration
  • > Boot options
  • Changed the setting to the Legacy Support on " Enabled"
  • F10 - save changes & exit

  Now, after the restart, if I go once more, configuration of the BIOS Legacy Support is set to disabled. Whenever I have change to active BIOS, Save & Exit, it is up to the people with reduced mobility. Because of that I can't run the installer of Windows 7 DVD.

  Please provide any help & suggestions.

  Thank you.

  Kind regards

  Eugene

  I managed to pass in Legacy mode as follows: http://www.eightforums.com/tutorials/13326-downgrade-windows-8-windows-7-a.html

  Reset the BIOS helped: https://www.youtube.com/watch?v=6KUyZIJ0xOc

  Can close the topic now.

  Thank you.

• In P6 P6 help link does not work

  Hello

  My P6 help link does not work in the Help menu.

  P6 library and Support link work.

  As suggested in another discussion, I tried to update the link in Admin > setting Application and restart weblogic, but system still takes another link that I defined in the application setting.

  Can anyone help?

  Hello

  We have worked on this issue,

  Solution:

  In the application of P6 EPPM Admin in the corresponding configuration in P6 help url, we changed the url from http://hostname:8203/p6help/help to http://hostname:8203/p6help/and we have restarted the P6 server in weblogic console.

  Then all fine now

  Concerning

  Kumar

• Shortcuts mouse to "Open the link in a new tab" help "Middle-click on the link" does not work on 10.0.1

  Shortcut of mouse to "Open the link in a new tab" help "Middle-click on the link" does not work on 10.0.1, it worked on version 9.0.1.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Qosmio X 875-Regza-link does not work

  REGZA-link does not work. When I connect to laptop to Toshiba TV HDMI cable, there is no icon regza-link on TV and I can't control the media player to the TV remote.

  At your Qosmio laptop factory settings?
  With other words do you use with preinstalled OS that you got with it?

• Satellite L650 - 12N USB Ports does not work

  My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
  It shows a yellow exclamation mark on my system.

  I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
  Under the key USB gives error code 43, I do not understand.

  The webcam and the wireless card no more.
  This boot problem after a storm in my area some time ago.

  Please can someone help.
  Thank you
  Sani

  Hello

  > This problem start after a storm in my area some time ago.

  Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

  I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

  But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

• HP Officejet 6830: wants to turn off printer 2-sided, and the author of the previous question link does not work

  to turn off printer 2 faces, and the author of the previous question link does not work

  Please read this post then provide some details.  What operating system? Windows, you can change the default value by going into the directory devices and printers, click with the right button on the Officejet 6830, select Printing Preferences, and choose the desired default values, apply.

• zynga took my moms account and changed password for facebook and e-mail, she followed the steps to change the password, but the link does not work

  I gave this e-mail address to answer to another email user but my password has been changed and nt theres initially asked

  zynga took my moms account and changed password for facebook and e-mail, she followed the steps to change the password but the link does not work as it changes the password of my account, she tried this link 3 times now is there anything else she can try.

  Hello

  ·        What operating system is installed on your computer?

  ·        What browser do you use to connect to the internet?

  ·        Which email service provider you are talking about?

  Because the problem is linked to facebook I suggest you to post your query on facebook forum for assistance:

  http://www.Facebook.com/help/community/

• When I hit send file, send it to this page or send link does not work

  When I hit the file send send this page or send the link does not work

  * original title - my file, send a page or the link does not work *.

  Hello

  Welcome to the Microsoft Answers Forum!

  Please provide us with more information.

  ·         What on the computer email client do you use?

  Windows 7 is not no matter what installed integrated e-mail client that is required to send links. You may need to either install Windows Live Mail or Outlook.

  You can visit the below mentioned link to download windows live mail.

  http://download.live.com/wlmail

  If you want to install Outlook and then you will need to post your question in the newsgroup to the Office to get the best resolution. Please see the link below:

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  I hope this information helps. Please get back to us if you have any other questions on this subject.

  Thanks and greetings

• My Windows 8 Expertzone download link does not work

  Download link does not work

  Hello

  I finished Windows 8 Associate level training through Microsoft Expertzone and I received a free copy of windows 8, but the download link does not work any help please?
  Thank you

  Hello Fadi Estevan,

  This is not the right site for questions about Microsoft ExpertZone.
  Contact them at the * address email is removed from the privacy *

  If you are not in the United States, go to the link here ExpertZone and enter your country.
  Then go to the bottom of the page "contact us".

  I hope this helps.

  Marilyn