Satellite A660: Can I use HDD recovery after the C formattg

Similar Questions

• Satellite Pro U400-12y: how to use HDD recovery after the new installation of the OS

  Dear Sir

  I have the Satellite Pro U400-12y and give tem my friend use it when he gets back, the laptops it do format c: and reinstalled new windows.
  I try to do the recovery only by pressing f8 without answering.

  How can I recover my laptop to its state of origin as drive HARD recovery again in d:
  Thanks in adv

  Hello

  You will not be able to restore the factory settings because another operating system has been installed on the first partition.
  Usually by pressing F8 immediately after the laptop has been powered should allow the advanced on-screen menu. Here, you should choose option called repair my computer and Toshiba Recovery HARD drive.

  But if this doesn t work then you will not be able to use HARD drive recovery.
  In this case, you will need to order the new CD from here:

  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Satellite 2450-201: cannot use TV option after the new installation of the OS

  Hello

  I have a laptop toshiba satellite 2450-201.
  I've always had the TV OUT works well with my TV, use the right cable SVIDEO.
  I was able to watch divx movies in my TV using my computer.

  I had to format the laptop and installed windows XP again.
  After that, I can't use more TV-OUT option, so that the image of the laptop could be seen on television, I've always had.
  After that I updated display drivers, but the problem remains.

  Can someone help me?
  Thank you

  Hello

  How do you reinstall the operating system? Have you used the recovery CD?
  Usually after the reinstallation of the operating system from the recovery CD, everything should work properly.
  It is important that you can switch to the TV. In this case, you can use FN + F5.
  If it's not working so I guess that for display devices hotkey utility works or was not installed. Well, the alternative is to pass on the TV via the graphic properties. The TV option, you should find somewhere in the advanced options.

  However, check it and check if you have installed all the drivers.

• HowTO: Toshiba HDD Recovery after the new installation of Windows 7

  If you install a new windows format or toshiba by a cd of windows you will not be able to see the Toshiba Hdd Recovery on F8 to restore the menu.

  Like this

  So if you have a recovery partition, you can make a recovery system to factory default. Follow these steps...

  1. format your USB key. Paste that file to a usb flash drive.

  2 - reboot the system and press F12 to start from usb...

  After these steps you can restore the system to factory default...

  Toshiba recovery steps

  Thanks for your interesting ad.
  I m very interested in how it works and will try to test it soon.

• Satellite P750 - can I use HDD of Satellite P770?

  Hallo,

  I have a Satellite P750-10 t and im looking for a new HARD drive but I don't know what HARD drive I can take.
  I found a disk for Satellite P770-12 t and I need to know if I can take it HARD too.

  There is not much difference between these drives, maybe just ability but you can use it on your Satellite P750. As far as I know both of them are hard drives with SATA connector.

  By the way: If you need a new HARD drive maybe you should think about upgrading with SSD. I can recommend you to do. use of SSD will increase the performance of your laptop and your computer laptop wil run a lot faster.

  If you have time to look for info on the SSD on http://storage.toshiba.eu/cms/en/index.html

• Satellite A660 - driver nVidia kernel crash - even after the update

  Hello

  Can anyone help? For the past two weeks, the screen goes black, momentarily, and I get a message that the nVidia kernel driver crashed and recovered.

  I've updated the driver located on the Toshiba download page and the problem persists. Any useful suggestions?

  See you soon

  EmeraldGem

  Have you tested the common graphics card driver that is part of the Win7?
  Uninstall the graphics driver in Device Manager.
  Restart the unit. Now go to Device Manager and mark the graphic card.
  Then update the driver using the automatic option.
  Usually the Win 7 should automatically find the most recent driver available and certified.

• Can I use my recovery for win7 to duel boot disk?

  I'll upgrade to win8, but I would keep win7. Can I use my recovery to duel boot win7 disk? I know that I would need to make a separate partition.  I have a HP p7-1132, processor image AMD A6-3600, 6 GB of ram ddr3, win7 Home running.

  I would use the win7 for my grandchildren and win8 for myself.

  No, you can not install after Windows 8 in a dual-boot configuration. He recommends first you have Windows 7 installed, and then create a partition and install Windows 8. See the following topics:

  http://techingiteasy.WordPress.com/2012/03/05/How-to-dual-boot-Windows-Vista7-and-Windows-8/

• How can I access my emails after the death of my PC. I had a pc using Windows Vista and I served my Windows Mail e-mail program.

  Disaster of Windows Mail.  Where are my emails please?

  How can I access my emails after the death of my PC. I had a pc using Windows Vista and I served my Windows Mail e-mail program.  The computer has stopped working so I removed the hard drive, put it in a case and now use it as an external drive.  My new computer, I took possession of the Documents and Settings folder, and I'm looking for emails.  I followed the path, Documents and Settings / / AppData / Local / Microsoft / Windows Mail but there are 2 folders, backup & stationery as well as a few small files.  Where I could hide my email? Please, I beg you.

  There should be a directory called local folders under the message store and eml files organized into folders named after the directories under this directory are.  They may be hidden files, so make sure that you have enabled the display of hidden files and folders under control panel | Folder options | View.  You can also try to search *.eml, because messages are stored as eml files.  See www.oehelp.com/backup.aspx#wm for background.

  Steve

• I bought the plan for photography and still pay each month. but I can't use photoshop only after update. and they need to join a plan. How can I do? I can only use for the trial version even I never tell months.

  I bought the plan for photography 6 months ago and still pay every month.

  but I can't use photoshop only after update. and they need to join a plan.

  How can I do?

  I can only use for the same test version that I pay every month.

  Hi yejik42305752,

  Please see the following article: https://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  Kind regards

  Tanuj

• I try to use After Effects on my laptop, but all his telling me, is that "you can't use this version of the application"Adobe CS6 effects"with this version of Mac OS x.

  I try to use After Effects on my laptop, but all his telling me, is that "you can't use this version of the application"Adobe CS6 effects"with this version of Mac OS x.

  Install the latest update of CS6:

  http://Adobe.LY/DVA_updates

• I can't use Lr5.6 after update Lr5.5 to Lr5.6

  I can't use Lr5.6 after Lr5.5 to Lr5.6 update and now it ask me the serial number or 30 days

  Please help me thank you very much

  If you run the LR 5 Cloud creative photography program, try the procedure described here:

  https://helpx.Adobe.com/Lightroom/KB/unable-launch-Lightroom-55.html

  If you run LR5 as a stand-alone series-number-license version, then enter your serial number, once again.

• Can I use automator to change the modified time of a file as its content?

  I use automator to rename a series of images.

  The problem is whenever I change a change of time of amending records file.

  Can I use automator to change the modified time of a file as its content?

  I know that I can use the Terminal to change a date but I have no idea how to do to automate this process

  As you say you know the command to use in the Terminal, and then with Automator, use the Action run the Shell Script after the name change.  The new file name will be passed to the Action run a Shell Script, and from there, you can use touch - r to set the time of the file at the time the name of the new file

• How can I use Office Update without the Office CD?

  How can I use Office Update without the Office CD? On the microsoft Web site, I clicked the options which mean that I would not need the CD (which was not provided with the laptop), but poartway through the service pack update, I get a request for the Office 2000 Professional CD.

  Any suggestions?

  Hello

  Did you mean an office or a note?
  As far as I know the a Note is part of the recovery Image and the CD is not supplied with the unit. In addition, Toshiba units are not delivered with the Office 2000 software.

  However, have you checked to aid either in Word update function?

  You will find an option called verification of updates
  http://Office.Microsoft.com/en-us/officeupdate/default.aspx

  Good bye

• I can't use windows Explorer or the network drive mapping to access my NAS drive more.

  original title: strange NAS problem

  Hi everyone I can't seem to fix this strange problem.

  I can't use windows Explorer or the network drive mapping to access my NAS drive more.
  I am running windows 7 Professional 32-bit on my PC, and until about a week ago she accessed from my PC very well.

  The location could not be reached and have not been able to run since said today that I went to update it and the drive mapped. I'm at my wits end.

  Here is some info.

  I can access to other computers and devices on my network.

  I can access the internet.
  I have a windows XP PC in the House who can always connect to my fine NAS drive (even if it's not mine).
  I PING the NAS drive.
  The NAS drive will do the same if connected via cable or by wireless.

  UPDATE: after the implementation of a shared folder on a Windows XP computer on the same network I am also unable to acsess the part of my PC. So I can assume that I can't browse all share folders or NAS drives on my local network.

  Help, please.

  Thanks for the help, but I fixed my problem

  Here's what I did in case anyone wants to know.

  I went into Device Manager and went to network adapters.
  I then expanded this section and under view changed to display hidden items.
  Several hundred elements appears (for most 6to4 adapters) and I deleted all the.
  Then click scan for new hardware.
  And... everything works again! YAY!

• can I use ipencil to paint the pictures on ipadpro?

  can I use ipencil to paint the pictures on ipadpro?

  If you have an application that supports it, of course.