Satellite A660 - webcam only shows a black image

Similar Questions

• Satellite A350 - webcam always shows black screen

  Hi folks - I know there were a lot of messages on the web cam works do not.

  I reinstalled the driver several times, I've adjusted and readjust the settings but the webcam still shows a black screen. If I try to record video - I get a failure to render the message.

  Can anyone suggest what I need to do to get the job of web cam?

  Thank you

  DCP

  Hey Buddy,

  Have you tried to activate the night Mode?
  Therefore, to access the properties of the webcam software, and in the next window, click on the night Mode check box.

  I think that this could be also interesting for you:
  http://APS2.toshiba-tro.de/KB0/HTD9402LC0000R01.htm

  To be honest after reading this document, I have problems with my webcam. :)

• Satellite A660 - Webcam not found at all

  Hello

  I was wondering if someone could help me please. I tried to use the webcam on my Satellite A660 PSAW3A 0TK00R using Windows 7 32 bit. When I open the Toshiba "Web Camera Application" application, the application will not load again and he says to the camera cannot be found.

  When I try to use the web cam on another application like Skype, webcam for TOSHIBA Analog Capture (Dev1 path2) he has said "unable to start the video. Try closing other programs that may use your webcam "."

  I tried to download the Toshiba Web Camera Application Webcam 1.1.1.15 Windows 7 32 bit 28,78 MB of the Toshiba site and who does nothing after she extracted. I followed the extraction to the temp directory and tried the file setup.exe. It uninstalled the Web camera Application. Restarted the computer, and then run Setup.exe and it reinstalled the program.

  After doing this, the problem is always exactly the same. I looked for the driver in Device Manager and you can not find a driver related to the webcam to restart. Anyone have any ideas on how to get the webcam working?

  Thank you very much

  Nick

  Hello

  I recommend a new installation driver webcam

  This means that you need to remove the current version of the driver for the webcam (Control Panel > uninstall a program) and then restart your computer. Use Ccleaner or another registry to remove bad registry keys and restart again. Then install the latest driver for the webcam that you can find.

  Check this box!

• Satellite A660 - Webcam does not work when using Skype

  I recently bought a Satellite A660-15J. I am running Windows 7 64 bit.

  I have the latest version of Skype (5.3.0.111).

  The integrated Webcam does not work when you run Skype. If I run the Toshiba Web Camera Application the webcam works fine. However, when I test it in Skype, I get a message saying "cannot start video. Try quitting other programs that use the webcam '.

  However, as far as I can tell there no other programs available. I have tried Skype with the Web Camera Application clised & open. I also confirmed that I do run the latest version of the program.

  One of the main reasons we have this laptop is to use Skype video... Help, please.

  Disable webcam application start-up and exit this application before you start Skype.

  I used Skype many different models of laptops, including friends A660 and it worked correctly.

  When you open Skype video settings is listed as default camera USB webcam?

• Satellite L650 - Webcam always shows the same picture

  Hello

  I recently bought a Satellite L650 and when I use the webcam it shows just the photo that was there when I bought it. I tried to take pictures and videos, but they all come out with this same picture. How can I get rid of this I can take my own?

  I hope someone can help me

  Thanks in advance
  PlanetJ

  Hi planetj,.

  I think you mean the webcam screen coverage, you can disable the webcam software if you click effect and select them OFF and it will no longer appear.

  The same problem, I found in this thread
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=189664

  I hope that helps! :)

• Satellite A660 boots up to the black screen with blinking cursor not upper left

  My new Satellite A660-10W sometimes (not always), when turned on, boots up to a black screen with a flashing cursor in the top left. If I stop by pressing the power button, it stops immediately. I then wait a few seconds and press the power button again and then it usually starts very well.

  Could it be updated during this process and I'll be more patient (usually wait a few minutes) before shutting down when this happens?

  Usually something like that shouldn't happen. Satellite A660 is no different from all the other models and OS must be loaded shortly after Toshiba welcome screen appears.
  Do you use your laptop with factory settings or you have changed something?

• Satellite L645 - why my webcam only shows me?

  My Satellite L645 came with the already installed webcam. I've never used, but I have to now.
  When I turn it on it displays the image of a kind of tropical lagoon instead of my face.

  I don't know where this picture is from is not a picture that I have on my computer.

  If I hit capture the camera takes a picture of the lagoon. How can I get the web cam to show my face instead of this generic lagoon.

  I looked at the help section but no luck.

  Hello

  Take a look at this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=188973

  There is a solution:
  Go to the bar of the webcam software (should come out from above or from the side)
  Click on the bottom option "Effect" in their 'net', click and click on 'OFF '.

• Webcam always shows the same image

  I was wondering if anyone would be able to help me.

  I recently bought a laptop with a built in camera. However, one of the photos I uploaded to my laptop has frozen, so whenever I try to take a photo or video of the camera, the image appears instead and I can't remove it. Whenever I take a picture, it takes a picture of the image, and there was also a video of the image.

  Please can someone help me

  Hi Emily,.

  Sorry, but I've never heard of this problem. This really does not for me so I can only give you a few tips that you should try.

  First I remove the webcam driver and install the latest version. While you have to restart the laptop. The latest drivers, you can download it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Also make sure all Windows updates are installed.
  In the worst cases, you must do a fresh install of Windows :(

  By the way: which laptop computer and the operating system you have?

• Satellite A660 webcam not in the list of devices

  A660 PSAW3A-07R00R had for a few years, but cannot use the Webcam because it is not in the list of devices. I downloaded the webcam application several times, with the last V1.1.1.15, but does nothing after extraction.

  >.. .but does nothing after extraction
  It means that start software install doesn t or what?

• Display > show rules only show empty black top and sidebar

  I have an AE CC project with many pre comps and want to use leaders to align layers and dragging the thin guide. However, as soon as I click on display - display rules, it shows a high black void and sidebar rather than units of the rule should have been. When I drag him, nothing happens.

  I have search the forum and the internet, but did not find a similar question. I checked my settings again.

  Any help would be appreciated. It's really frustrating to work without rules.

  Thank you in advance.

  Amanda

  I see. whenever I see this type of Visual anomalies, I suspect a corrupted preferences or GPU Driver file. We will see about that:

  1 reset your preferences: Ctrl / Cmd + Alt + Maj + launch of the app you will be presented with a dialog box to reset your preferences: click OK

  2. update your GPU driver

• Satellite A660 - Webcam not working not

  Toshiba Web Camera Application using - worm 1.1.1.15, no video or photos available.
  Blue light comes on and record sound in video mode, by plaayback.

  All active device manager looks OK.
  Uninstal USB 2.0 Camera, restart, log on to Toshiba get latest version of the software, without change.

  Install the new external camera OK.
  All advice please?

  Hello

  The laptop supports face recognition?
  In my case that the webcam is not working because of the facial recognition software something wasn't there and the webcam has been locked by another application... It's the facial recognition software

  I uninstalled the facial recognition, then webcam software
  Then I restarted the laptop and cleaned the registry with CCleaner (freeware tool can be downloaded many 3rd party pages).
  Then installed software of the webcam and facial recognition utility
  After that, the webcam reworked

• I can't get my Powerpoint to view through the projector. It only shows my office.

  I can't get my Powerpoint to view through the projector. It only shows the desktop image and not my slides.

  You have mirrored screen checked? If this isn't the case, you must drag the PowerPoint window on the desktop appears on the projector.

• Webcam on Satellite U500-17 x only shows black photo

  Hello

  I bought a portable 17 U500 x about a month ago. I'm on Win7 64 bit version that came with the pc.
  The webcam worked perfectly in the early days. Then I didn t use it for awhile and now it only shows black picture on webcam of Toshiba, msn or Skype software, all have the same problem.
  I didn't change any setting of the device. they have all of the default settings. The blue led on the side of the camera turns on but only a black screen.
  If I use the software Toshiba cam and try to take a picture it says "failed to capture the photo.
  On "Device Manager", the tab for imaging devices shows usb 2.0 uvc webcam without error and with the updated drivers. I get no error at startup or when opening the cam applications.

  I got drivers win7 European Toshiba webcam website "20091112111752" and them again after uninstalling the cam Toshiba Software I had installed. Also reinstalled the device of face recognition.
  The problem persists...

  Any idea?

  Best regards

  Hi Costa

  It is not easy to say what the problem is here. All that you have done is just but I think it's time for a more radical, but also more effective solution (test). Reinstall the operating system and test the features of cam with the factory settings.

  It should work again. If it's not... maybe service?

• Webcam shows black image.

  Hello, my laptop is HP 6107 TX and I have a built-in webcam, who worked the first days after I bought it, but after that, the webcam screen just shows black. But the strange thing is that if I bring a bright object, such as a phone screen near him, it shows a green image of the phone on the screen:------Pls help as soon as POSSIBLE.

  Hey

  Then I had the same problem with my computer, and what you need to do is when you turn youcam, and then proceed to improve the video image and go to advanced and then automatic check box next to the exhibition and of course the camera returns to normal! I hope this works for you too!

• Windows7 Desktop only shows black color whenever any substantive theme or Image are selected in the customization

  in my Windows7 Desktop only shows black color whenever any substantive theme or Image are selected in the customization. Plese geve me a solution

  Hi Odette.

  Thanks for posting your query on Microsoft Community forum.

  Question has started happening recently? If YES, did you of significant changes to the computer before this problem?

  The question could arise for various reasons, including corrupted cards, damaged TranscodedWallpaper.jpg file, Remove background images is selected in the Control Panel, etc. To diagnose and troubleshoot these causes of the problem, I suggest you try the steps outlined in the following link and check if the problem persists.

  Impossible to change the background image in Windows 7

  In addition, please refer to the steps provided by Shawn "Cmdr" Keene [MVP] replied on January 6, 2011 in the following thread link: "".

  I am unable to change the background of color United in my windows 7 ultimate

  Additional information:

  Why can't I change my desktop background?

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.