Satellite A665-14R - drivers not available for Windows 10
Hello
I tried to search Toshiba A665-14R drivers but drivers are not available for Windows 10, if I'm looking for the section Drivers on the toshiba Web site and select my computer model A665-14R then no driver rises, I think toshiba assuming that A665-14R cannot install Windows 10 rather I have 8 GB of RAM & CPU Intel i7 with a 3D graphics card! Its not like my laptop is old and cannot load windows 10, Microsoft has already tested and approved my laptop to window windows installed 10, since I have installed 10 my laptop works fine but I am not able to install TOSHIBA PC Health Monitor, Synaptics Pointing Device Driver, installation of equipment TOSHIBA TOSHIBA value added package Etc Etc
Its really annoying that I can't scroll down pages because the Synaptics pointing device has no update
Any help please?
Thank you
This model is quite old and has been supported for Win7. I can just say... no luck. A lot of older machines may well work with newer operating systems, but they are not officially supported.
What should do? Try to check if the drivers, tools and utilities for a newer machine with similar hardware can be used on your laptop Satellite A.
I had the similar problem in the past with Vista and no supported Win7.
Tags: Toshiba
Similar Questions
-
HP Pavilion G6-2302ax: drivers not available for 64 bit windows 7
HP Pavilion G6-2302ax drivers not available
1 chart
PCI\VEN_1002 & DEV_6840 & SUBSYS_184A103C & REV_00
PCI\VEN_1002 & DEV_6840 & SUBSYS_184A103C
PCI\VEN_1002 & DEV_6840 & CC_030000
PCI\VEN_1002 & DEV_6840 & CC_0300
2. Bluetooth controller
PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00
PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C
PCI\VEN_1814 & DEV_3298 & CC_0D1100
PCI\VEN_1814 & DEV_3298 & CC_0D11
3. Ethernet controller
PCI\VEN_10EC & DEV_8136 & SUBSYS_184AEC103C & REV_05
PCI\VEN_10EC & DEV_8136 & SUBSYS_184AEC103C
PCI\VEN_10EC & DEV_8136 & CC_020000
PCI\VEN_10EC & DEV_8136 & CC_0200
4. network controller
PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00
PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C
PCI\VEN_1814 & DEV_3290 & CC_028000
PCI\VEN_1814 & DEV_3290 & CC_0280
5. SM Bus controller
PCI\VEN_1022 & DEV_780B & SUBSYS_184A103C & REV_14
PCI\VEN_1022 & DEV_780B & SUBSYS_184A103C
PCI\VEN_1022 & DEV_780B & CC_0C0500
PCI\VEN_1022 & DEV_780B & CC_0C05
6 UNIVERSAL Serial Bus (USB) controller
PCI\VEN_1022 & DEV_7812 & SUBSYS_184A103C & REV_03
PCI\VEN_1022 & DEV_7812 & SUBSYS_184A103C
PCI\VEN_1022 & DEV_7812 & CC_0C0330
PCI\VEN_1022 & DEV_7812 & CC_0C03
7.
Bus controller series UNIVERSAL (USB)
PCI\VEN_1022 & DEV_7812 & SUBSYS_184A103C & REV_03
PCI\VEN_1022 & DEV_7812 & SUBSYS_184A103C
PCI\VEN_1022 & DEV_7812 & CC_0C0330
PCI\VEN_1022 & DEV_7812 & CC_0C03
Need to install these drivers for windows 7 64 bit
Hello:
First download and install the amd chipset drivers and restart.
http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064
Graphics card:
Audio:
Bluetooth controller:
Network controller:
Ethernet controller:
-
TS140 optical drive drivers not available for download?
Try to install Windows 7 on TS140. Support/drivers page offers the sunix as a driver for the storage Extender. Have expanded on a portable player. Win 7 install almost immediately calls for drivers for the optical drive, but when I browse to the INF folder, it does not have the appropriate drivers. Am not finding any drivers for storage devices support/download.
Can someone point me in the right direction? TIA.
Finally, I whipped this problem using a laptop optical drive (usb) for installation. Once the installation has been made, I brought the network via USB key drivers. Once the network was functional, the rest of the drivers became available via Windows update. It took about 24 hours, given that Microsoft takes control of updates.
-
Realtek driver update not available for Windows XP on Vista B4 upgrade to Windows 7
Hi all I set up my cell phone before installing Windows 7. The compatibility check says I need to download the latest driver for Realtek RTL8139/810xFamily Fast Ethernet Realtek Semiconductor NIC and before reinstalling after installing Windows 7. However, when I tried to do this Realtek said it is not available. Any advice on what to do? If I install Windows 7 I'll be without driver, really worried then. Thank you in advance, really need help. Thank you in advance, Ros
If the manufacturer of the hardware does not support the operating system to use, the only possibilities are driver compatibility mode Setup, hope that works of an integrated 'generic' or replace such hardware with something that is supported on the operating system, that you choose to run by the manufacturer of said material.
-
Satellite Pro 4200 drivers and utilities for Windows 2000
Hello
Recently, I decided to upgrade the OS on my satellite pro 4200 to Windows 2000, it was previously under Windows 98.
After the installation of Win 2000, many components are missing or not working not properly (display, missing utilities, etc.). I couldn't find the Win 2000 drivers in your download section.
Could you please help me?... is there any service pack with all the win 2000 drivers and utilities of this model? Where can I download from?
Thank you very much
Hello
Littco said, all the drivers are on the Web site.
In addition, check if you can install a driver that was designed for ie Win NT or Win Xp. sometimes, these drivers work on W2k operating system.Good bye
-
LAN is not available for Windows 7?
How do I connect to the internet via LAN cable in Windows 7 Home Premium?
LAN works fine in another PC with Win XP.
There is no option to connect via LAN only wireless in Windows 7...
We also tried USB without success.For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to the it.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
Not available for Windows XP Bluetooth Driver
I'm using netbook S10-3 and driver software given in the dload lenovo page is not supported as tone are not for the xp OS... Help, please.
Here is your XP S10-3 discs
-
Satellite L350 - 172 (PSLD8E) - drivers and tools for Windows 7
Hi all
After 3 years using this laptop with Windows XP, I decided to install Windows 7 Professional 32 bit. It was very easy and because of 3 GB of RAM it works fast (faster than XP).
Download area of Toshiba in the web offer of many drivers and utlities for Windows 7 and this laptop but what did this sowftware is not mentioned:
Storage Manager?
TEMPRO?
Tiles for Mobility Center?
Value Added Package?
PlayReady PC Runtime?
ReelTime?
ServiceStation?Does anyone have a description or an idea?
Hey Buddy,
The description for each driver or tool on the Toshiba driver download page. So the first serach for your model of laptop here:
http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
Laptop > Satellite > Satellite L Series > Satellite L350 > PSLD8E > Windows 7 32 bitYou can see a list with all the drivers and tools. If you want to see the description on the right side of the table, you can see more information. Then click the arrow to the right and the description for this download page will be loaded.
Check this box!
-
I think I got this, just need confirmation, before I was going to HP.com to find udpated pilots, then site Web HP said if computers purchased after August 2013 have been tested, I think you could get the updates via the HP with WIN10 site. My pc model was purchased in February 2013, it seems now that I have WIN10 there is no drivers for me page to go it says that I need to go to the updates of Windows. Before I upgraded to 10, I was 8, and I had full access to the drivers download through HP.com page. However, I think I understand now, I had a problem with the Norton Removal Tool, after using it, it makes my pilot biometric and disabled the Windows Hello to WIN10 - the reader of fingerprints for a connection. The pilot appeared to be corrupted and I needed to just reinstall. I finally found an old forum via HP where someone has had the same problem that I did and they are found to include a link for the driver, and it worked for my model of laptop and solved the problem. After some tests, I uninstalled the driver and learned at that time, after the driver is uninstalled, I can go to Windows Update and it will search and find the driver that I uninstalled and offer me the download to reinstall. That's cool. So, I understand now that even now if the drivers are not available for my model via HP.com, I can now just do a search through Windows Update and it will fix the problem, only after that I uninstalled it through Control Panel, Device Manager, once I uninstalled, restarted the computer, then did the updates of Windows It downloaded the driver, like when I went to the Control Panel, Device Manager, I saw the biometric driver in good working condition. This is the case now with who need driver updates / reinstall? (Note: to update the drivers, I know too much, you can go to control panel, Manager of devices, and then click the driver and select Update driver software.)
Hi @MVP1 ,
Welcome to the Forums of HP Support! I have, I understand that you are concerned about Windows 10 updtaes. I'll be happy to help you.
You are right. Microsoft took the drivers for this computer. All updates will now come from Microsoft.
If you need help, let me know and I will gladly make all that I can to help you.
Please let me know if that solves the problem by marking this post as "accept as a Solution.
To simply say thank you, click the Thumbs up below!Thank you.
-
has stopped working properly because a compatible driver is not available for this version of Windows. This is the error I get and it made my computer unable to re boot. Please help me how to set right.
Thank youyHello
you left in the name of material on
DM9601 USB to Fast Ethernet card; fix?
and sorry, but I cannot find a driver for him after XP
you are also posting in the wrong forum
Try the forum hardware and drivers
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware?page=1&tab=all
or contact the hardware manufacturer
they write drivers for their products, not from microsoft
______________________________________________________
try a restore of the system before this happened
http://www.windowsvistauserguide.com/system_restore.htm
If necessary do in safe mode
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
-
Printer drivers HP LaserJet M1005 MFP not supported for Windows 8
Dear support,
I use the printer HP LaserJet M1005 MFP range, but the drivers are not supported for Windows 8.
Pls can update you with the new drivers of windows 8, which his slove my problem.
Thanks in advance
Concerning
Vermorel
Hi Majusko,
If the Windows 7 installs on 8 to win, you must wait for the pilot to Win 8 to be released. Basic/Host-based driver available February 2013
-
Toshiba satellite click not available for use 10 2 battery
Hello, I have a problem with the second Says Toshiba satellite battery battery click 10 - ch. 2: it is not available for use. I did the bios 1.7 update. I have 1 fully charged battery for 10 hours.
Does anyone have a solution?See another thread on the subject
-
When I run the Upgrade Advisor, it tells me that Windows 8 is not available for download online in my area - why is this?
Original title: upgrade to Windows XP
Windows 8 or 8.1, is not a free update, it is not yet extensible through
Windows xp, they are'nt compatible. A clean install is required. In addition,
BONES need a lot more material PC to run, try this link for
material.
http://Windows.Microsoft.com/en-us/Windows-8/what-is-PAE-NX-SSE2
-
I am trying to upgrade my computer to Windows 8, but after that I put in my product key, it says "sorry, Windows 8 is not available for online purchase in the country/region, you're in." I tried it on two different computers on two different sources on the internet. So I think that it's the product key, but I don't know and I don't know what to do.
Hello
From your problem description, I understand that you are not able to buy Windows 8. Please let me know if you do not experience this problem.
I suggest you to contact Microsoft Support and buy windows 8.
https://www.windowsupgradeoffer.com/en-in/home/ContactCustomerSupport
http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Site_Contact_UsHope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.
-
"Windows 8 is not available for download in your country." I live in South Carolina?
Hello
Please, try to change the locale of the system , such as described in the following article and see if it helps you:Hope this helps, good luck :)
Maybe you are looking for
-
Staingate MacBook Pro Retina Display - mid-2014
Hello world Today, I noticed a few scratches on the screen of my MBP mid-2014. I did a search in google and I found several links to the staingate (I didn't know its existence), which is basically the problem I have. I made a call to apple support in
-
Why not FF 3.6.24 write 'Close tab' in the Console log?
Whenever I get close a tab (a few seconds thereafter) Firefox 3.6.24 wrote the following line to the console system (OS X) log: . org.Mozilla.Firefox [7254] close-tab tab Curious. Why? OS X 10.5Firefox 3.6.24
-
I designed a photo album and want to use the apple printing service, but then it did not work when I try to buy. Any notification or something to say why it does not work
-
Airport Extreme in Bridge Mode? What did I want?
I'm AT & T Uverse with Gigapower. Until today I had 2 networks in my home, the AT & T router then the one I created on my Apple Airport Extreme. The tech told me that I can implement the airport just mirror or fill the AT & T network. In this way a
-
The memory test: FAILURE (tune-up system) for a Pavilion dv7-4031TX
Hello If someone knows how to fix the memory issue? I get an error message when I run a memory test by using the program of development of the hp system. I can't be too sure how long I've had this problem because it is the first time that I tested th