Satellite A665-S6086 - keyboard does not work after the outpouring of fluid

I have a Toshiba Satellite A665-S6086 laptop. A couple of months, I spilled the zeroth power and he went on the keyboard. I'm sure that some went through it as well. The computer turns now and I can use an external mouse and external keyboard. Nothing on my keyboard does not work as well as the mouse. I can't go on the internet due to not being able to use the F8 key so.

The only key/button that works is the power button. The dvd/cd drive works.
Help, please.

The external key board I use has no FN key. a f1 to f12, but when I hit the button on the external key board f8 nothing. Please help me get internet light somehow.

Thank you

And what kind of help do you expect now? What can we do?
Why you n t fix it and be happy with the new keyboard?
How long you want to use your laptop in such a State?

Contact Toshiba service, let them swap keyboard and clean your laptop. OK it's a bit chilly but you'll well workbook again.

Tags: Toshiba

Similar Questions

  • Satellite L505-119 - keyboard does not work after the spill incident

    Recently had a minor spill on my laptop incident. Quickly, I removed the battery and the power and let it dry for a few days.
    After two days I tried starting but without success. Then I carefully opened the laptop and carefully cleaned and dusted it all the way to the motherboard. Surprisingly, it started working perfectly again, with the exception of the keyboard and I don t know what to do.

    I tried making sure that the band is correctly inserted into the motherboard of countless times and tried to uninstall and reinstall the keyboard drivers, but both were not helping. What I want to know is; If there is anyone of you who have had the same problem, and if there is a way to check if it s my keyboard or motherboard that is broken.

    Thanks in advance

    >... If there is a way to check if it s my keyboard or motherboard that is broken.
    In my opinion, there is only one way to check: replacement keyboard. You should test the functionality with the new keyboard to see if everything is OK.

  • Satellite 200-170-keyboard does not work and the keyboard stops working

    My U200-170 2.5 years, I have the following problem:

    When after the start of the key is opperated the keyboard does not work and the keyboard no longer works (works until the button is pressed) connect a keyboard and a usb mouse. does not work because that device unknown. After Internet received external usb driver work ok. someone at - it an idea to solve this problem.

    Thank you

    AJAN

    Sounds like keyboard problem.
    The operating system uses the pilot to clean keyboard and generally it s not necessary to reinstall the special keyboard driver.
    But one thing is really strange; the yellow exclamation mark in Device Manager

    Eventually it s only a problem of software in such a case, a system restore can be useful...

    Have you checked if the keyboard works in the BIOS?
    Do this!

    If the keyboard does not work in the BIOS, then you will need to replace the internal keyboard with the new.

  • Satellite U940 - backlit keyboard does not work after sleep

    If my computer goes to sleep the light most of the time does not work. CTRL-Z is nothing.

    I have reset the values by default and still no luck. I need to reboot to get it to work again.

    I see it as one problem for others:

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=70512

    Looks like you have created several post on the same topic:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=71599
    Recommend to follow a thread to avoid misunderstandings.

  • Re: Satellite A500 - FN key does not work after the upgrade to Windows 7

    Hello
    The FN key does not work even if I have (Toshiba Value added Package) and (toshiba flash Cards help).
    Happened after the upgrade to Windows 7 and using the upgrade CD to retrieve all of the tools and utilities.

    Satellite A500 - 134

    Try restarting Flash cards.
    Start > all programs > Toshiba > utilities > restart Flash cards.
    After doing this press FN button several times.

  • Satellite M200 FN function does not work after the downgrade to XP

    Hello
    Recently, I have donwgraded my Vista to XP on Satellite M200 home but the Fn works for mute, brightness etc, don't work.
    All solutions?

    Thank you.

    Hello

    First of all, I must say that the Satellite M200 cannot be a European model for Toshiba laptop.
    I didn t find any Toshiba XP drivers on the European driver from Toshiba website.

    Eventually he s Toshiba U.S. laptop series or model Australian for Toshiba laptop.

    However, I think the buttons FN don t work on Win XP because the correct driver is missing and not installed (modules, etc) or the BIOS does not support the XP completely.

    I noticed a similar problem on a laptop A200. After installation of XP the FN buttons didn't work, but after update of the version of the BIOS XP I get the FN feature

    If both is possible
    I put t know if an update of the BIOS especially for Win XP is available but you can check it out, if it is not available, you will need to use the laptop without the FN buttons feature s.

    Good bye

  • Satellite C875-100 - WLan does not work after the victory 8 upgrade - no driver

    I bought a toshiba satellite c875-100 yesterday and I did the upgrade of windows 8.
    Before the upgrade of the network wireless connector worked well, after the upgrade, he doesn't.

    Device Manager showed that my network connector driver was not installed.
    I tried all the drivers of toshiba online for this specific model with the name 'Wireless' in it and later on al the drivers for this particular model, but every time I get the message that the Device Manager cannot find the appropriate driver.

    Adesperate attempt I have just tried to choose a driver from the list of windows itself (I choose the realtek PCI wireless network card) but who gave a sudden stop of the system.

    Anyone have a suggestion how to get my network controller to work?
    If not, is it possible to revert to the version of windows 7, which was already installed?

    Thanks in advance!

    Hi mate

    As I m wrong not the laptop does support RTL8723AE Realtek Wlan card.
    You need the driver that would exactly support the RTL8723AE WLan chip

  • my wireless keyboard does not work after the upgrade to El Capitan

    I have a wireless trackpad, keyboard, and mouse connected to the iMac of 2013. Everything works fine until I upgraded to El Capitan a few weeks ago. Whenever I wake the system from standby mode, I am unable my password key using the keyboard. The keyboard no longer respond or begin typing the characters on his own.

    So I did a little research on the Internet and discovered by turning off the wireless trackpad will solve the problem. So I tried and yes it works. But it also means that I have to turn off my trackpad whenever I need to connect using my keyboard, which is not the best solution. And my keyboard and trackpad have always been placed side by side, works perfectly well until this upgrade of the OS.

    Does anyone have a solution to this?

    Thank you

    Have you tried to remove the keyboard and the trackpad of Bluetooth devices in the bar of Manu. Then allowing them to be discovered again.

    (You may need to hold down option when you select Bluetooth)

  • Satellite U840W-10J - WiFi does not work after the mode 'sleep' - Win 8.1

    Ladies and gentlemen,

    I bought a Satellite U840W-10 days; PSU5XE on Windows 8 was preinstalled. I've updated to Windows 8.1.

    My wifi works until the laptop goes to sleep once, then it does not any longer and I have to restart as it cannot connect to the Internet again once.

    I use a VPN as well.

    I've already updated the wlan Driver and many other drivers as well but nothing helps.

    Thank you for helping me
    123XYZ

    Try this:
    (a) press the Windows key + X, select Device Manager.
    (b) right click on network adapters.
    (c) click on properties and select the power management tab.
    (d) uncheck the box allow the computer to turn off this device to save power.

    Finally restart the system

  • Keyboard does not work after the service pack update

    Original title: keyboard problems

    I installed an update of the service Park on my laptop and now it's like my fn key is stuck. the correct key type if I hold down the fn key.

    Hello

    Method 1:

    Follow the steps in troubleshooting section and check if that helps.

    Some function keys or keyboard shortcuts do not work correctly on a computer that is running Windows 7

    http://support.Microsoft.com/kb/975741

    Method 2:

    Try to download and install the latest keyboard software drivers from the manufacturer's Web site and see if the problem is resolved.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  • Keyboard does not work after the release of the standby mode? Try this!

    I saw the following to resolve the issue where the keyboard doesn't seem to work after being out of the mode sleep on some computers laptops here recently. If you encounter a similar problem, try the following steps:

    -> Panel-> audio & -> Power Options change Plan (of the current selected plan) settings-> change advanced power settings-> parameter of selective suspension of USB-> Disable (both)

    -> Panel-> audio & -> Power Options change Plan (of the current selected plan) settings-> change advanced power settings-> PCI - Express-> Link State Power Management-> Disable (both)

    After completing these steps, restart your computer. Everything should work now!

    I hope this helps!

  • Satellite A300-15V: keyboard does not work after that Win7 has started

    Hello

    I just installed windows 7 64 bit on my A300-15V and some strange problems:

    When I boot up, the keyboard and the touchpad works until I log in, as soon as the desktop appears my keyboard and trackpad stopped working.
    If I restart the laptop everything seems again works fine.

    Sometimes in the middle of working on something, the laptop and the trackpad will stop working completely and I have to restart the laptop to operate again.

    I installed the chipset drivers listed under my OS, but that has not solved the problem.

    Can someone point me in the right direction?

    Hello

    Hmm, please set the BIOS to default settings!

    You can enter the BIOS by pressing F2 while the laptop starts.

    You also need to install the driver for the touchpad, as far as I know there are two drivers; Synaptics and Alps. The two must be installed.

    Please check also if the touchpad is not disabled by pressing FN + F9 key combination!

    Welcome them

  • Satellite P10-304: USB does not work after the upgrade to XP Pro

    You just bought a satellite SP10-304. Beautiful machine, but comes with XP Home edition. I've updated to XP Professional but seems to have lost the USB Ports. Device Manager indicates that they are working, but plug 'all' USB devices produces no reaction/recognition.

    Any ideas, please? What I put in the recovery disc and go back to XP Home?

    Thank you

    Ian

    Have you installed Microsoft all MS on this unit?
    I recommend that you install all updates.

    Win XP Home uses the same drivers as WinXP. In this case, everything should work without any problems.

  • Bitmoji keyboard does not work after last update iOS 10

    My Bitmoji keyboard does not work after that I updated to iOS 10 update. I have no idea why, my friends Bitmoji keyboard works fine after that she has updated her phone and mine does not work so I was wondering why. It worked perfectly fine before I upgraded my phone. I was wondering what to do.

    the same problem. He repeats to me go to keyboard settings and make sure that it says allows full access to Bitmoji and it does. Should not have upgraded to iOS.

  • Trackpad and keyboard does not work after upgrade to Windows 10

    Trackpad and keyboard do not work after the upgrade to Windows 10 in Boot Camp on a MacBook Pro in early 2011. So, I'm unable to enter password. How to connect? Can I go back to Windows 8?

    1. you can turn off your Mac and your power it back up and hold the Alt/Option key.

    2. you can also run the following procedures to restore the OS default.

    3. If you use a Mac 2010 to run W10, officially Apple does not support the combination. Older than 2012 Mac is not supported for the W10.

    4. Please see also Boot Camp: the operating system default value .

Maybe you are looking for