Satellite A75-S231: error NFP LIST CORROMPRE - fails to load Windows

Similar Questions

• my systems page will not open error message "the page failed to load".

  Original title: my systems page does not open after going into the control panel and then system and maintenance

  my systems page opens not after going under maintenance then system and Control Panel. This shows simply "the page failed to load". I need to access this page to share files from one computer to the other. can anyone help?

  Hi Sarah Brown,.

  (1) remember you to make changes prior to this problem?

  (2) what is the complete error message you receive?

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.

  
  Method 2: if a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• Error code 0 x 80070017 when loading Windows 7 Home Premium

  Original title:

  Over a generation, was loading Windows 7 home Premium, got an error code 0 x 80070017. Cannot get one further in the operating system loading. Go Boot Manager. How in the world I get this resolved?

  Hello

  Refer to the suggestion provided by Kevin Hau on May 11, 2010 in the following link.

  Installation of Windows 7: 0 x 80070017 error code

• Satellite M305D-S4830: error recovery - Partition creation failed

  Computer: PC Toshiba laptop
  Model: Satellite M305D-S4830

  Problem: Originally windows wouldn't start; so I decided I would try reformatting it to solve the problem.
  First of all, I erased the hard disk; now, I'm trying to use the "TOSHIBA Recovery Wizard" provided with the laptop for reinstalling the operating system, but end up getting the following:

  "ERROR: 08 - 0 74-0000.
  Failed to create partition. »

  p.s. I've tried formatting using the command prompt, but it says format failed after choosing a volume name.

  p.s. #2 when I run the Startup Repair tool, I get the error that the volume is corrupt

  I noticed there is a hidden partition called X: where there is a backup of the operating system out-of-box, but have no idea how I could use this backup to possibly restore windows...

  What should I do?

  I think the problem is the partition on your HARD drive.
  You said erase the hard drive, well, this might be the reason why the recovery is not working as it should.

  In my opinion full HARD drive must be formatted again (all partitions must be removed and formatted too.).
  Perhaps you could use an original disc of Microsoft (Win XP CD) to format the HARD drive and you can then use the Toshiba Recovery disk to recover the laptop again!

• Satellite Pro A300 - error - webcam driver open failed

  Hello

  I have the Satellite Pro A300
  The web cam stopped working after upgrading XP in Vista (webcam driver open fail.) Restart camera or computer)

  Any help

  Hello!

  I used the forum search and founded a good display of user Akuma.
  Maybe it's the s solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=136549

  Good luck!

  Good bye

• Satellite A75-S231 - BSOD when I insert a CD or DVD

  When I insert * any * CD or DVD (Formated or a cache or with multimedia content) in the mattress * a multi player, I get the Blue Screen of Death with the error message "Bad_Pool_Header".
  The Tech line reads: Stop: 0 x 00000019 (0x00000020, 0x88D59B8, 0x880D59D0.0x1A030001).

  I tried to uninstall and reinstall the drivers, but the problem remains. Does this mean the carpet * a Multi Player is bad?

  Try to remove the CD/DVD filters in the registry.
  When the associated CD/DVD (such as iTunes, Nero, virtual CD software), the software is installed, they install filters in the registry, which can cause compatibility problems.

  (1) run Regedit (start-> Run-> Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).

  This utility can remove the filters for you:
  http://www.CSD.Toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe

• Windows Update error code: C1900101 - 4000D (failed upgrade to Windows 10)

  Hello. I recently tried to install Windows 10 Home in my PC. But the upgrade process froze in 87%. And later, it is rolled back to Windows 7 Home Premium (64-bit) , showing the following error "C1900101 - 4000 D,"

  What should I do to fix this problem and install Windows 10?

  Details of my PC - Acer Aspire Z5771 ,.

  Operating system: Windows 7 Home Premium (Service Pack 1) (64-Bit) (supplied with the PC)

  Processor: Intel Core i5 (64-Bit)(2.50 GHz) (4 cores)

  Memory: 4 GB (DDR3)

  Storage: 1 TB (HDD)

  Graphics card: GeForce of Nvidia and Intel HD Graphics

  Sound: RealTek High Definition Audio and Dolby

  Touchscreen: Yes

  Hello

  Thanks for posting on Microsoft Communities.

  I'll be happy to help you with the problem you have with the computer. I understand the frustration when things do not work as it should.

  Please find the link below to find out "how: solve common installation problems and stop errors during the Installation of Windows 10.

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-troubleshoot-common-Setup-and-stop-errors/324d5a5f-d658-456c-bb82-b1201f735683

  How to: a list of things to do if the Windows 10 install fails.

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-a-list-of-things-to-do-if-Windows-10-Setup/eba3c864-d9fe-4F8E-9468-81b1f89473ed

  Just reply with the results. I'll be happy to help you.

  Thank you.

• What installation updates, I get the following error and all updates fail: __code 646 Windows update encountered an unknown error__

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Thanks Michael, it worked.

  Enjoy and happy father's day

• error code when I try to load windows live messenger

  retail fm computer handle windows Journal
  Log name: Application
  Source: Application error
  Date: 2010-02-23 13:56:52
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: trish-PC
  Description:
  Failing application msnmsgr.exe, version 14.0.8089.726, time stamp 0x4a6ce533, failed module kernel32.dll, version 6.0.6002.18005, time stamp 0x49e037dd, exception code 0xe06d7363, offset 0x0003fbae, process id 0 x 1708 error, start the application time 0x01cab43c2d159fea.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1000
      2
      100
      0 x 80000000000000
     
      69155
      Application
      Trish-PC
     
   
   
      Msnmsgr.exe
      14.0.8089.726
      4a6ce533
      Kernel32.dll
      6.0.6002.18005
      49e037dd
      e06d7363
      0003fbae
      1708
      01cab43c2d159fea
   
  

  msg Wen he said he stopped in the detail area

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: msnmsgr.exe

  Application version: 14.0.8089.726

  Application timestamp: 4a6ce533

  Fault Module name: kernel32.dll

  Fault Module Version: 6.0.6002.18005

  Timestamp of Module error: 49e037dd

  Exception code: e06d7363

  Exception offset: 0003fbae

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 3081

  http://www.Microsoft.com/communities/newsgroups/en-us/default.aspx?DG=Microsoft.public.Windows.live.Messenger

  Discussions in Windows Live Messenger

  They will help you with your WLM questions when repost you your questions in the highest Windows Live Messenger Newsgroup.

  See you soon. Mick Murphy - Microsoft partner

• Satellite A100 - BSOD on startup and often refuses to load windows.

  Hello

  I've had my laptop A100 little over 3 years now and there is a moment he began to stop loading when I lit. He would often be an opportunity "the window loading" icon and then stay there indefinitely. Then he began to spotaneously telling me that I had a blue error screen and restart the whole process.
  Sometimes it lights fine.

  The battery is no longer in charge right now that when I plug in my laptop it trying to load (but it remains at 0%). The computer will work without batteries.
  I think (or maybe just imagine) that if I wait until the orange light for the batteries to charge turns off until I turn on my laptop it tends to start the first time.
  Can someone tell me what is the problem with my laptop and if there is anything I can do about it?

  Thank you
  Jen.

  Hi Jen,

  There are many reasons that can cause this kind of behavior...
  -Make sure that the hard drive is free of errors
  -check if the battery is ok (check the duration)
  -load for 24 hours
  -check the memory (ramtest)
  in many cases the hard disk has errors, bad would be a damaged mainboard...
  but without checking the components, you will not be able to determine the "real"...

  ask a help servicepartner

  perhaps only the battery is bad...
  start the laptop without battery and watch if failures happen again.

• GjpgPack\instrument.dll"failed to load Windows 7

  I have this window at different times and know how to solve this problem:

  RegSvr32

  Module: 'C:\Users\Jim\AppData\Local\GjpgPack\instrument.dll' could not be loaded.

  Makesure the binary is stored at the specified location, or debug it to check for problems with the binary or dependent file. Dll files.

  The specified module could not be found.

  Ron - what is a codec and how would identify him in a program that has been installed?      Since my computer seems to run smoothly anyway, how can I get rid of the window 'RegSvr32 '?    Thanks again for your help.

  Hello

  Codec:

  The codec name is abbreviation of coder-decoder, what does a codec. Most audio and video formats use some kind of compression, so that they do not take a huge amount of disk space. Audio and video files are compressed with a particular codec when they are created/saved and then decompressed by the codec when they are read.

  Codecs include. MPEG. AVI. WMV, DIVX. MP4, etc., etc., for video files and. WAV. AIFF. MP3, etc, for audio files. Codecs can also be used to compress media streaming (audio and video live), which makes it possible to broadcast a live audio or video clip via a broadband Internet connection.

  Codecs - Frequently asked Questions:

  http://Windows.Microsoft.com/en-us/Windows/codecs-frequently-asked-questions#codecs-frequently-asked-questions=Windows-7

  The result is that when you use a specific media file that was created using a particular codec, codec must be installed to play the video file.

  You should try to isolate what that you do, start a program, multimedia application, game, utility or another application when this error occurs. This will reveal the component that is causing the problem.

  You cannot "get rid" of the "RegSvr32" (Microsoft Register Server). The .dll or components ActiveX installed in Windows use this component to record the .dll (Dynamic Link Library) file in Windows before it can be used.

  How to use the Regsvr32 tool and solve the Regsvr32 error messages:

  http://support.Microsoft.com/kb/249873/en-us

  Let us know if you have any other questions.

  Concerning

• After replacing the hard drive failed to load Windows Vista due to CD drive problem

  Original title: new hard drive

  My hp pavilion dv6700 crashed to its hard drive. I put a new and need to load the operating system vista on it. The cd-rom does not work. I have an external cd drive. What should I do?

  Hello

  «I use the three recovery DVDs I've done everything first, when I bought the laptop Pavilion dv6904ca /HP /.»  And I suspect that they are not good for some reason any. Even if I did so that I have them stored in a safe and proper manner, they were probably unnecessary since the beginning. »

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• glronwai.dll failed to load at startup.

  Original title: DLL file at startup, Windows 7 error

  Hello.  My Toshiba Satellite laptop is restarted, I get an error message: glronwai.dll failed to load, to the location: c:\Users\Sharon\AppData\Local\...

  I have Windows 7 Home Premium, version 6.1 (Build 7601:Service Pack 1)

  I ran mrt looking specifically at the local file and complete the analysis, nothing found.  I ran Wise Disk Cleaner and Wise Registry Cleaner.  My McAfee Security Center is in place, running, updated and scan detects no problem.

  Any other ideas?  Thank you very much.

  Hello Sharon,

  I appreciate the efforts to solve the problem.

  I suggest to start your computer in a clean boot, then check the issue.

  Put the computer to boot.

  Perform a clean boot to verify if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts. Follow these steps in the link below to start the computer in a clean boot.

  How to perform a clean boot for a problem in Windows 8, Windows 7, or Windows Vista

  http://support.Microsoft.com/kb/929135

  Warning:  Please go through the section: how to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

  Follow the steps below to perform a SFC scan on your computer to fix the problem.

  Follow the steps in the section "use the File Checker system (SFC.exe) to determine which file is causing the problem and then replace the file" from the link given below.

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files

  http://support.Microsoft.com/kb/929833

  See the link given below for registry cleaner.

  Registry cleaners are needed?

  http://Windows.Microsoft.com/en-us/Windows7/are-registry-cleaners-necessary

  Write to us with the stats of the question. We will help you to come.

• Failed to load application instance publishLive/live.

  Full registry error is (_defaultRoot_, _defaultVHost_): failed to load application instance publishLive/live...  Flash Admin Server and Flash Media Server running on the local computer.  During the test I get [NetConnection object]: NetConnection.Connect.Failed.  When I delete the main.asc file it works... What is happening out there?  I got this job at a time... my main.asc is below.

  var nc;
  var ns;
  NSR var;

  Called when a client connects
  application.onConnect = {function (customer)}
  
  accept the new connection to the client
  application.acceptConnection (client);
  
  Send a message
  trace (client.id + "is connected");
  }

  Called when a client disconnects
  application.onDisconnect = {function (customer)}
  trace (client.id + Date()) "disconnection at"+ new; "
  }

  
  Called when the client publishes
  application.onPublish = function (client, livestream) {}
  
  trace (livestream.name + "publishes on request" + application.name);

  This is an example of using the publishing feature multipoint to republish
  stream to another instance of the application on the local server.
  If (application.name == ' publishLive/live') {}

  trace ("republish the ustream stream");

  NC = new NetConnection();
  NC. Connect ("rtmp://1.616528.fme.ustream.tv/ustreamVideo/616528");
  
  NS = new NetStream (nc);
  
  called when the NetStream server has a status
  ns.onStatus = {function (info)}
  trace ("stream status:" + info.code)
  If (info.code == "NetStream.Publish.Start") {}
  trace ("publishes the stream");
  }
  }
  
  ns.setBufferTime (2);
  NS. Attach (livestream);
  NS. Publish (livestream.name, 'live');
  }
  }

  application.onUnpublish = function (client, livestream) {}
  trace ("cancellation of publication is" + livestream.name);
  }

  REGISTRATION
  application.onAppStart = function() {}
  This.NSR = Stream.get ("livestreamSS");  "<-this is the name of the instance of server-side"
  This.nsr.Play ("livestream",-1, -1);          "<-this is the name of the instance published"

  this.nsr.onStatus = {function (info)}
  If (info.code == "NetStream.Play.PublishNotify") {}
  application.startRecording ();
  }
  If (info.code == "NetStream.Play.UnPublishNotify") {}
  application.stopRecording ();
  }
  for (var I in info) {}
  trace ("i:" + i);
  trace ("info [i]:" + info [i]);
  }
  }
  }

  application.startRecording = function() {}
  
  infoObject var = Stream.getOnMetaData ("livestream");

  trace ("metadata for mavideo.flv :");
  
  for (i in infoObject) {}
  If infoObject [i] == {"record"
  trace ("start recording");
  This.NSR.record ();
  }
  }
  
  }

  application.stopRecording = function() {}
  trace ("stop recording");
  This.NSR.record (false);
  }

  In your FMS installation directory, look in the newspapers/_defaultVHost_/publishLive and see if there are errors in the files applicationXX. If there is a syntax error in your code, it will appear here.

• I also, I get the error "the service user profile Service has no connection, failed to load the user profile" but I have not been able to correct the problem by following the listed solutions.

  I got the error "the service user profile Service has no connection, failed to load the user profile" when you try to use my desktip.  It is on the login page.  My account icon loads and the guest account. I have enter my password as an administrator and get the error message listed above. I followed all the solutions I could find and it is not corrected.

  I have a slight hitch, after several failed here, I checked the domestic Group on my laptop and I have high listed as connected to the Group Home Office; with all the files.  How can I fix the desk top to coinside with his status of being online.  Yet once, my counter top will not recognize the password, but the desk top shows online in the home group.

  Home Group is Windows 7.

  Here is the Vista Forums.

  What operating system do you use?

  Vista info below:

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner