Satellite A80: No sound after installing XP Pro
Just upgraded my Satellite A80-115 from Windows XP home to Windows XP Pro SP2
Download all the drivers for the A80 from the site and install. Everything works except for the audio driver, I have no sound coming from the speakers.
Nothing is cut on the system.
Realtek AC 97 Audio driver
Tried the Patch KB888111 from microsoft but still no sound. It's driving me crazy...
Please help me! 1
Post edited by: cono
Perhaps the solution described in this thread might help:
1. download Microsoft's KB835221 hotfix
2. Remove "Audio device on High Definition Audio Bus"
3. install KB835221
4. reboot the system
5 XP automatically detects devices
6. after that you don't need, but you can install the realtek drivers
I am a novice when it comes to laptops, so here's the problem: my 3110 ct no sound after installing XP Pro. Had no noise when I bought it with another operating system, the report says no audio devices installed.
Does this mean that I have to make a chip for laptop or a driver, I need & where can I find the driver or the part for this.
Usually, if the audio driver is not installed you will get no sound, but also a yellow exclamation point must appear in Device Manager.
If the sound card chip is damage, I imagine that you will not be able to see the yellow exclamation point belonging to the sound card in Device Manager.
You bought this Portege as a second hand unit. Am I wrong?
So maybe the sound card is faulty.
The computer uses an ES1978 ESS (Maestro-2E) and sound chip ES1918.
Check if you can find an audio driver XP in internet.
Have downloaded audio drivers and installed on laptop but unit still does not.
Media players gives this message:
+ Windows Media Player cannot play the file because there is a problem with the audio device. There may be a sound device installed on your computer, it can be used by a program or it is not working properly. +
What should I do?
I found the other thread you have already posted:
The user Jayjay has already posted a solution. Check the last assignment!
First of all sorry for my bad English; P
I installed Windows XP Pro on my computer and all the drivers with installation instructions, but I have no sound, there is no audio device. I downloaded the drivers from the Toshiba site and the Realtek site. Both do not work.
Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99567 please
There is some discussion on the similar problem. Maybe it will help you with your Satellite U300.
Bye and good luck!
I reformatted my hard drive using the recovery CD, after which, I installed Windows XP Pro. Originally, it was Windows Home Edition that was previously installed. Now, the sound is missing and some components more.
I tried to download the audio drivers from the Web from Toshiba support site but it didn t work. When executing the installation of the software Sound Max of Analog Devices, Inc., a guest of error is displayed "driver not found, please reboot your computer and reinstall again". Can someone help me on this?
First of all buddy you need to update the XP to the last State. I mean to install the XP2 and all patches and fixes available!
Then you must download all the available drivers, tools and utilities for XP and should install it in the right order.
The right installation order is mentioned in the installation instructions txt file.
XP audio driver Analog Devices Inc. v220.127.116.11.5160 is available on the page and it works for sure!
I installed Windows XP Professional on my Qosmio F30-113 (preinstalled system is WinXP MCE).
All devices work properly except for the audio card.
It not there no sound anywhere, but in Device Manager, it seems, there is no problem with any device.
I tried to install the audio driver (sound-qf30-xpmce - 51049460.zip) TOSHIBA-Center download - but after restarting Windows install tells me, that the current system doesn't support driver, which I am trying to install.
What should I do? Which driver to use?
It's very strange. As far as I know that the driver can also be used with WXP Home and Pro. There is no difference. You are right on the sound card. Your laptop has an its SigmaTel STAC9200D card and the driver is SigmaTel HD Audio driver V5.10.4946.0.
I don't know how did you install all the drivers, but I hope that you did this in the order of good facilities. The order of good facilities, you can find after downloading the install Instructions document.
The machine is a Satellite P100 just more than a year, came with Vista installed. No problem until today when Vista SP1 has been automatically downloaded and installed. Now I have no sound from speakers or headphones.
I've uninstalled and reinstalled the driver Conexant Audio Hi-Def to the latest recommended on the Toshiba site.
I tried to restore to before the time when SP1 was installed.
I updated the BIOS to the last on the Toshiba site.
I pulled my hair.
Someone at - it any other suggestions?
It s certainly a useful information. Thanks again!
had to install xp because vista is not good for me. the system does not install sound card drivers, and Device Manager, there is no listed his card.
I have yellow? marks on "PCI Device" I think it's the soundcard and "network controller".
I searched this forum and got some results that looked like they can solve the problem, but unfortunately the recommended fix was removed by Microsoft.
* Before would be to install the audio driver, you must first install the *.
* KB888111.* and AUDIO KB835221 hotfix
* Here are the patches from Microsoft. Search the net for download *.
* After installation, restart the operating system, and then try to reinstall the driver sound again.*
Microsoft, still have KB888111, but no KB835221, as they claim that it has been proven to fail!
Here is the link to the missing patch.
Hope this helps you.
I just reinstalled windows xp Prof today and upgraded to service pack 3.
Sound has worked well in the first until a reboot, no more noise.
A few reinstalls the drivers now, sometimes he says its all installed fine, other times it says no audio devices installed.
In both cases there is no sound...
Sometime on a restart (many reboots today) the sound suddenly came back to life, to die again at the next reboot...
Im hoping someone can help me with this problem cos Im leaving on vacation tomorrow and really need my sound ;)
Thanks in advance!
You should on Windows XP two audio patches if you have a card high definition audio:
These updates are in integrated SP3, you must install Service Pack 3 or the updates first, then the audio driver. So in your case, I would like to delete the sound driver, use CCleaner and then install the latest version from the Toshiba site.
I was handed a second laptop to work - so not sure if the sound is already working but...
(1) I installed Vista Business Edition
(2) no sound through the speakers or headphones
(3) no error in the Windows Device Manager.
-Reinstalled the Realtek drivers on the site of pilots tosh
This is updated from windows
-During playback of an audio file, that the graphic equalizer appears normally - that is bouncing up and down with the beat
Now of ideas!
Thanks in advance!
I think I know what could be the problem.
The sound should be set as high as possible before the installation of Vista!
In addition, you should check if the sound wasn't mute runig the previous operating system.
This may affect the sound on the new Vista operating system installed!
I searched a bit on sites Web of Toshiba and the Central knowledge and found this useful article about the problems of sound on Vista OS
[Its utility to turn Mute Off | http://support.toshiba.com/support/viewContentDetail?contentId=1671893&pf=true]
I would appreciate any comments from you
I've updated the audio driver on my laptop A30 today on the Toshiba site with download of Realtek Semiconductor Corporation, and now the sound does not work. It's my single stereo so I feel really bad. The original driver discs are stored and I'm not very techie so help please...
Thanks a lot for your time, Phill
First of all, I would like to check the sound settings in the control panel to make sure that none of them are extinguished, and that "dumb" is not checked. Also check that the volume on the side of your A30 control is enough at full volume.
In the case where everything is set correctly, I would then reload the driver Realtek of the utility CD and tools of Toshiba. If you do not have access to the CD then you can restore the driver to its original state by selecting the audio device in Device Manager"and roll back driver it.
If all else fails you should be able to 'restore' your system from the last point before your installation of the new driver restore.
I have a problem with sound after installing Windows 7 on a (PLUA1E) satellite Pro U200. No Win7 audio driver available on the Nordic pilot site. Help, please.
Have you already checked the site Web of Toshiba itself?
I found a driver for Vista 32 bit and Vista drivers most also work on Windows 7 so it s worth a try! :)
Am not able to get sound after installing XP. Drivers from the Toshiba web site do not help. Does anyone have an idea on this issue. Thank you
It's old model of laptop, and all pilots must work. I'm sure you make a mistake. On this old notebook, you must install Windows XP Home SP1 edition and after doing this install all patches software, driver chipset, driver and driver sound to the less rated. The sound should work fine.
If you have laptop model please download the drivers from the EMEA support page http://eu.computers.toshiba-europe.com
I installed Win XP SP3 on my Tosh laptop.
I have everything works except the sound.
We know of a compatible for this model sound card driver in XP.
I downloaded the bucket full of HD and AC97 Realtek drivers, but none seems not to work.
I'm really struggling with this one and do not want to go back to Vista.
Reall any help is appreciated. Robbie.
I had the same problem with sound after installing XP everything seemed fine but no sound!
I found a solution;
You need to install the MS patches; KB835221 and KB888111
These hotfixes must be installed before installing driver sound!
But I put t know how it works with SP3. I think that you need to remove the SP3 first and then you could install the patches mentioned.
However, once the patches have been installed, you must follow with the Realtek HD audio driver installation. The latest driver should be placed also on the Realtek page too.
Well, in my case it worked so it should work on your laptop too!
No sound after installing windows on my hp 620 help 8
I can't find your audio driver on the HP support page, but I was able to locate it, which is the same engine as yours, just the latest version. According to what is listed, it supports Windows 8. Give it a shot and let me know if it works for you.
Maybe you are looking for
I already have an HP eprint e-mail address. I just replaced my printer and want to use my HP eprint current e-mail address. Is it possible to do it with the HP Envy 110F?
Hello I've been setting up TM install on my laptop and therefore a number of small white square boxes is appeared in the upper part of the screen. These have letters inside them as follows: F R E V C T Z I N P L O H Any ideas how to get rid of them?
After a recent reinstall of Windows last XP I downloaded all the drivers/software for my model (portege M100) but after installing that I still have a yellow exclamation mark under "other devices" which he said the a network controller. I don't know
Can I connect iPad 2 to hp 2540 via Att hotspot using AirPrint myfi? I thought that the iPad 2 could connect directly to an HP e-printer anyway
I have two independent 521AP and 526 controller. I would change my standalone mode controller 521AP. How can I get the controller IOS mode? I have an account of CCB, but that doesn't let me download the software. I have to buy new mode controller IOS