Satellite - black screen and can't restart with the recovery disk

Similar Questions

• Satellite Pro L300 - what I can reinstall Vista with the recovery disk?

  Hey

  I dual-boot (running Windows Vista & Win7) and if I delete Windows Vista can I reinstall Windows Vista with my recovery CD?
  And I have another drive on my computer for recovery Partition so I can use my recovery CD to reinstall Windows vista if I want once I got rid of him and would it erase my win7 disk or remove the duel boot?

  My specs are:
  Intel Pentium
  2 GB OF RAM
  Hard drive 160 GB

  > if I delete Windows Vista can I reinstall Windows Vista with my recovery CD?
  You can use the recovery disk to reinstall Vista on your laptop but as Luke mentioned, the recovery disk would format the whole HARD drive. It would erase all partitions on the HARD drive and you will lose also the installed Win 7!

• Satellite Pro A210 - how to retrieve it with the recovery disk lost?

  I had some problems with my individual Pro A210 (AMD Athlon 64 x 2, Vista, 120 GB of HDD, 2 GB of RAM), and it seems that I did the recovery disks when new and you have misplaced them.

  What can I do?

  The hard disk should have a recovery Partition.

  Try holding down the zero (0) key when you turn on the laptop, this should start the recovery process.

  If this does not work, press F8 rapidly after the Toshiba start screen to enter in the Windows Start menu, where you can choose to run the recovery/restore.

• PC won't start at all, and when I try with the recovery cd, I get blue screen

  ORIGINAL TITLE: Help me please

  My toshiba satellite p200-123 moel is any commissioning and when I try with the recovery cd I get a blue screen, also I can't start safely mode.the error message I get is... the file is maybe corrupt.the the file header checksum does not match the checksum calculated... help pleasseeee

  Hello

  You are booting from the recovery disk?

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  If you continue to have problems with the help of Toshiba recovery disks, you will need to contact Toshiba.

  As you get a blue screen, you may have a hardware problem.

  Toshiba support:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  You can also try the free Toshiba Support Forums:

  http://forums.Toshiba.com/

  See you soon.

• my hp presario says 'boot mrg is missing' and only load windows 7 can correct with the recovery disk

  my hp presario says 'boot mrg is missing' and only load windows 7 can correct with the recovery disk

  Hello

  Here is the vista forums

  Try the repost in Forum windows 7 the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA, EJUW

  Hi all

  I tried to apply the patch from Jan 2016 to the Weblogic Server that runs the RMS Application.

  The version of the Weblogic Server is 10.3.6

  The version of RMS App is 13.2.6

  While applying the patch that has a PATCH-LIST of S8C2 on the Weblogic Server, I encountered the following error:

  [oracle@test-rms-app bsu] $. /BSU.sh - prod_dir = $WLS_HOME / wlserver_10.3 - patch_download_dir = / home/oracle/2016_JAN_CPU_SPU - patchlist = S8C2-verbose - install

  Checking for conflicts...

  Detected A - conflict to solve and run the installation of the patch again

  Conflict condition details below:

  Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA, EJUW

  After reading the forums, I followed the suggestion to delete the previous patch: EJUW and who has obtained successfully removed as shown below, when I tried to install the Patch Jan complained conflict ZLNA patch and when trying to remove the ZLNA encountered unrecognized patch ID patch: ZLNA.

  [oracle@test-rms-app bsu] $. /BSU.sh - delete - patchlist = EJUW-prod_dir = $WLS_HOME/wlserver_10.3

  Checking for conflicts...

  No conflict detected

  Removal of the Patch ID: EJUW...

  Result: success

  [oracle@test-rms-app bsu] $. /BSU.sh - prod_dir = $WLS_HOME / wlserver_10.3 - patch_download_dir = / home/oracle/2016_JAN_CPU_SPU - patchlist = S8C2-verbose - install

  Checking for conflicts...

  Detected A - conflict to solve and run the installation of the patch again

  Conflict condition details below:

  Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA

  [oracle@test-rms-app bsu] $. /BSU.sh - delete - patchlist = ZLNA-prod_dir = $WLS_HOME/wlserver_10.3

  Encountered unrecognized patch ID: ZLNA

  Any suggestions how to solve and apply the fix successfully Jan would be useful.

  Thank you.

  Hello

  Can you please set the download directory of the fix for MW_HOME/utils/bsu/cache_dir/with the help of Smart updated interface and test again.

  To designate a directory to download the hotfix, follow these steps:

  Start the smart update.

  On the Smart Update main window, choose file > Preferences.

  The Preferences dialog box appears.

  In the section Patch download directory of the Preferences dialog box, specify the path to the download patch directory.

  https://docs.Oracle.com/CD/E14759_01/doc.32/e14143/start.htm

  Thank you

  Aishwarya

• Re: Satellite L300D comes with the recovery disk?

  Hello

  I don't get a recovery disk when I bought my Satellite L300D.
  Does anyone know if Satellite L300D is provided with the recovery disk?

  As much I know computers made from the middle of 2007 aren't provided with the operating system recovery disks. How can I find out what year my satellite is made?

  Thank you very much

  All new models of laptops including your are delivered without the recovery DVDs.
  Recovery image is saved in the folder called HDDRecovery on the second partition.

  Akuma is right. "You need to create a recovery media using preinstalled" Toshiba Recovery Disc Creator. The shortcut that you can find on the desktop. Please do so and for the creation of recovery media I recommend you to use media high quality as TDK or Verbatim DVD-R.

  You can install OS using the F8 key at startup to the top. The guideline how to proceed you will find under http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
  Note please. This can be done if this recovery image is not modified or if you install another operating system on the first partition. the second partition can be in original condition, but this F8 option will be gone.

  If you have any other questions please let me know.

• I reformatted my T520 with the recovery disk, but Windows cannot start

  I reformatted my T520 with my recovery disk. When the computer restarts, it says that Windows cannot start properly. Help, please.

  I finally solved the problem; Here is my solution:

  I have determined that the backup image has been bad, and this is perhaps why the recovery disks have been as bad. I tried to use both to reformat the C:\drive several times without success. Fortunately, I had a Windows 7 disc from another computer that I no longer use. However, the T520 would not be updated to Windows 7 using this disk, so I run Diskpart to reformat all (this removes everything, including the image.) Then, I was able to reinstall Windows 7.

  With this new facility, would not any responsible drivers, including LAN and wireless drivers. I went on the Lenovo Web site: http://support.lenovo.com/en_US/downloads/default.page?selector=expand to download the driver for "Intel Wireless LAN (11abgn, abg, bg). This provided wireless access to the computer. (Downloaded the driver on another computer, saved on a USB stick to transfer to the T520.) Restarted the computer in case where. Then, I went to http://support.lenovo.com/en_US/detail.page?LegacyDocID=TVSU-UPDATE to download ThinkVantage System Update 5.0. After you have installed this software and reboot, all the necessary drivers would be so loaded.

  Unfortunately, if you don't have any Windows disk, you will need to pay 50 dollars to get one from Lenovo. Lesson learned? Next time I buy a new computer, the first thing I would do is to reformat and reload the computer by using the image while still under warranty. I did several times with my other Lenovo laptops without fail. I have to do this once every 3 years each time my computer seems to slow down. This is the first time, it didn't work.

  I hope this help anyone who is in the same situation.

  (Boy, I have miss the good old days when I could fix everything from the DOS command prompt.)

• Equium P300-19O - black screen and does not restart

  My Equium P300-19O had a blue screen of death after a few accidents occurred due to a broken Windows media player which 3 safe resets and then I get a blue screen of death.
  I restart the laptop, but now I have past the toshibia load up, but do not get further rather get a black screen with a dash flashing in the upper left corner.

  Please suggest anything that could help me get the laptop again.

  Hello

  Have you checked if you can boot into safe mode? You can try to start in safe mode if you go into the advanced boot menu by pressing F8 after you have switched on the laptop. Here you can choose.
  Maybe you can also try a system restore to a previous state.

  If it doesn t work it should boot from the recovery disk Toshiba and reinstalling Windows.

• Satellite U400 cannot create DVDs of recovery with the recovery disk creator

  Hello

  I have a Satellite U400 (a few years), and I never created the recovery DVDs.
  Now I want to do, but for some reason, when I run creator of Toshiba Recovery disk, nothing happens...
  The partition containing the files of recovery is there, as well as the folder HDDRecovery. I have add a few files on this partition, this could be the problem?

  Thanks for your help.

  > I have some files on this partition, this could be the problem?
  N ° if you didn t change the partition structure should not be the problem.

  It is: does this Toshiba recovery disc creator market or not? If you can not star this tool has nothing to do with the recovery files.
  You will find this file - C:\Program Toshiba Toshiba Recovery Disc Creator\TRORDCLauncher.exe?

• Two problems with the recovery disk

  Hello

  It's my PC Toshiba laptop 3rd and for the first time I have this problem:
  I just struggle and it come with C:233 GB and D 233 GB * or some. I try to divide the disk HARD C, D and E, but when I try to use the recovery disk disk resize my HARD drive for the factory with C and D only setting
  Is it possible to use the recovery disk, but to choose the partition that I want to be to install the operating system?

  Second problem is:
  before * begin to do something with * my HARD drive I did the USB recovery using the toshiba software
  but * when I say in the menu for starting a startup USB form comes only a black screen with white line in top left corner and so still why this is happening
  It's the information Satenv.ini are there is something wrong

  [Commune]
  Packer = ImageX
  InstallCMD = \inst.cmd
  FactoryInstallCMD = \facinst.cmd
  PartitionSizeGB =-1
  MinPartitionSizeGB = 15
  DefaultGUILang = English
  NumLang = 1
  Hnum = R11460EN
  [Lang1]
  Lang = FRA
  OS = Windows Win 7
  ImageName = 10185XSP.swm
  ImageIndex = 2
  WinREIndex = 1
  FS = NTFS
  StartMedium = 1

  Hello

  In the past, you probably had old laptop models shipped without recovery disc option HARD and recovery facility old ghost. Now it works a little different.
  Here is my little explanation:

  Question n ° 1
  > Is it possible to use the recovery disk, but to choose the partition that I want to be to install the operating system?
  N ° before installation of HARD drive recovery image will be erased completely and create new partitions (factory State).

  2nd edition
  It will not work. Installation of recovery work as installation DVD or HARD drive recovery procedure.

• Satellite x 200-25 h does not read the recovery disk

  Hello

  I bought my laptop less than a year ago and I wanted to format.
  I tried to use the product recovery disc, but it seems that it will not read.
  My laptop reads all CDs, but the recovery one.

  I put the cd in the machine, stop, turn and press F12. It shows me 2 hard drives and cd/dvd option and one I don't remember, I think it's LAN. I choose the CD/DVD option and taking me in a black screen and after 1 minute, Windows load...

  I already tried the other options, but nothing happened, the first option (1 hard drives) takes me to windows. The other takes me to a black screen, then windows.

  When I use the cd of the laptop makes a horrible noise...

  ANOTHER problem I have is that I have just 1 CD, I've never had a recovery CD 2 or more... I don't know that I have not lost given them that I never touched this thing...

  Please HELPPPP

  Hello

  Maybe the drive is not able to manage the recovery due some scratches or something like that disc
  Who knows why the CD/DVD drive cannot read, it seems to be the problem with the drive

  You could try to copy (burn) this DVD using another computer and then could attempt to use the recovery disc copied in order to verify if the drive would deal with the new drive

  Check it out

• Satellite A100 has a black screen and will not charge in the Bios

  I bought a Satellite A100 - (model psaa8c-0fh00e) about 5 months ago. It was left overnight, which is not uncommon, and when I came back using about 15 hours later it was just a black screen. moved from the touch screen and keys, and nothing did. so I cold it starts and he died. I then turned it back as usual and the laptop turns on but the screen is completely black. It's not loading the normal Toshiba Bios screen.

  Now my question: If there is any way I can solve this, I am familiar with computers and parts. I don't get this cause I've ever had to reflash the wood or something like that. I am unsure of how to activate and I really want to have to take it to a shop, any suggestions would be helpful.

  Thanks in advance.

  Hi Conrad,.

  If your 100 starts normally (spinning HARD drive, optical drive LED flashes, fans turn etc.) then I suppose that your FL inverter or LCD screen is not. You can check this by connecting an external monitor to the laptop to see if it shows the normal display.

  On the other hand if there is no activity at all portable computer turn when you turn it on then I guess you have an internal hardware failure, possibly the main card, which must be checked by a Service partner authorized Toshiba since the unit is still under warranty if it is only 5 months old.

  Kind regards

• Satellite L300 - black screen and a cursor flashing at the top left

  July 11, 2010
  My computer purchased on March 7, 2009.

  I don't know if there is a problem of tension, but there is certainly a problem of heat and since I bought it, almost constantly overheating. For about 2 months, it became more slower to load the desktop. For about 1 month, the operating system found himself in a cycle of rebooting - rebooting repeatedly instead of start normally.

  On July 11, 2010, the Windows XP operating system would not start. Lit black screen, blinking cursor in the top left. The computer does not have a Windows startup disk and won't start not in: -.

  Safe mode
  Safe mode with networking
  Safe mode with command prompt
  Last good Configuration known (most recent settings that worked)
  Start Windows normally
  System Restore - will not give access.
  Recovery console - the Windows XP CD will start and provided access to the Recovery Console called tool. Operations: -.

  Difficulty in a Boot.ini file that is damaged - YES
  Difficulty a corrupt partition boot sector - YES
  Difficulty of a corrupt master boot record - No.

  I pressed F2, F8, F10 and F12.

  Hello

  It seems that something was tangled up in your Windows installation and the computer can no longer start t.

  In this case, you have only one option and that s reinstalling Windows. Therefore, you can take the (better) Toshiba Recovery disk or a Microsoft Windows XP disk. It will restore factory settings and your computer is read to use again.

  Check this box!

• Computer Vista gets a black screen and can't connect to internet

  Hi there can someone help me please? He says that my connection is unknown, the dependency service group was able to start can not even connect to my network of ISP :(

  also I have a:(comme son redémarrage en mode sans échec chaque fois que je l'allume pense que son temps de téléphoner à mon ingénieur) black screen

  * original title - it's very frustrating *.

  Try the procedure described in the article below
  http://www.windowsnetworking.com/articles_tutorials/5-tips-troubleshoot-Windows-Vista-networking-issues.html