Satellite C - DVD tray does not open properly

Similar Questions

• Satellite A200 - DVD player does not open

  Hello

  I had no computer laptop withmy problems so far and my DVD/CD does not open. I'm not savvy in same computer so bear with me! There is no lights there at the moment and when I turn on the laptop it does not sound like he used to. I looked on other forums and tried things like access to the Device Manager, but it says that it is on it - any other suggestions would be welcome.

  Oh, and I get no error message and in Device Manager its says that "the device works correctly.

  See you soon

  Hello

  You can try to open the CD/DVD drive using something small and thin. Near the eject button, you should find a small hole.
  You have to slide - in the little thing and should manually open the CD/DVD drive.

  Then try to insert a CD or DVD disc and close the CD/DVD drive.
  Check if the drive can read data from the disc.

  I would recommend also check if the CD/DVD drive would eject the disc by pressing eject button check different opportunities.

  Welcome them

• Satellite A300 DVD tray will not open and cause high CPU utilization peaks

  Hello

  I have a laptop Toshiba Satellite A300 - 1 MM and I have a problem with the optical drive (Mat * un DVD Ram Uj880as):

  DVD - RAM plateau sometimes refuse to open. The LED lights up briefly, but still nothing. Windows recognize the drive but the plateau of refuses to open. Eject commands the position of work and management of the computer-> disk management will not work. I can open the tray manually but the optical drive will not read any cd/dvd. No error code in return.

  When that happens it cause peaks of high utilization of the processor (from 60 to 100%) in the System Idle Process. Just stop and restart it solve. After that, the laptop also runs fine and the optical drive.

  I replaced Win7 32-bit with a 64-bit version and the problem persist.

  Help, please. Thank you.

  I have the same machine with Win7 32 bit and use several players. Everything works perfectly. On this virtual path, it is not easy to say what may be the problem. The configuration of your laptop is not known to us, and we don t know how you set up your operating system and additional applications are preinstalled.

  Maybe stupid advice now, but you must install recovery image original Vista that you got with the functionality of your laptop and test with the factory settings. If the same problem occurs we can chat about it.

• Satellite L500-126-CD/DVD drive does not open very well unrolled

  Hello

  I just got my second Satellite L500-126.
  I traded my first for a new because the ESCAPE key got stuck sometimes and made a grinding sound.

  Now, with my new one, I noticed that my dvd drive does not open very well unrolled and 2 bars of silver metal bit come out with the car when I open it.
  Is this normal?

  Also, when I close the dvd player, I hear a little noise "ping!"
  Like a spring, or something. Is that also normal?

  Thanks in advance.

  Hello

  I'm not quite sure what you mean by 2 small bars of silver, but the reader of my laptop s contains two metals (runners, railway).
  This is normal and these pieces are important to ensure that the drive can eject properly and could remain in a good position.
  Still, you will hear a short click Open and close the drive.

  So I guess it's ok.

• Satellite P25-S520 - DVD player does not work properly

  Difficulty of DVD player or buy the external drive

  My DVD player does not work properly, in fact it can never work properly. Recently, I tried to back up my PC on a DVD using Norton 360. Norton did not recognize that the DVD was present. Then I tried to write a text file on a DVD and was a failure. DVD + R and DVD-R media were found to be (Maxwell 16 X).

  I could have probably lived with this however, I received a copy of Dragon NaturallySpeaking version 10 on a CD and my Toshiba would not recognize it. I tried the CD in my laptop nearby and it was recognized.

  An attempt to update the driver has also fails.

  I was able to copy a CD of music last night so that at least works properly.

  Does anyone know how can I fix? The important part is to be able to load my new program.

  Research on some forums I found that other people have had problems with the Pioneer drive. If the drive can't be fixed, I'm not adverse to buying an external DVD drive. Unfortunately, where I live there is no brick and mortar stores selling external drives and I prefer to avoid the hassle of getting a drive online and discovering that it does not work with my Toshiba. Can someone suggest an external USB drive that will read and write CD and DVD and is certain to be compatible with my Toshiba?

  Thanks for any help,
  Humbaba3000BC

  Satellite P25-S520
  PIONEER DVD - RW DVR-K12D
  Driver provider: Microsoft
  Driver date: 01/07/2001
  Driver version: 5.1.2535.0
  Digital signer: Microsoft Windows Publisher

  Any external USB CD/DVD drive will be compatible with your laptop.

  However, you won't be able to boot from CD (run recovery for example) If you are using an external drive.

  So, your best option would be to replace the internal drive with a Toshiba drive designed for the laptop. Call an ASP and request a quote.

• My cd-writer/DVD disc tray does not open when I press the Open button. He is not blocked and has no disk in it. How can I me t to operate?

  Cd-writer/DVD disc tray does not open when you press the Open button, or when you use the buttons to control the media on the keyboard. How can I restore it to its operating state?

  Hi John,.

  Please let me know exactly what happened when you tried my suggestions of first and second.

  Of your most recent post, looks like you're watching the wrong part of the Device Manager. Optical drive is listed under "readers of CD-ROM/DVD-ROM". The info you gave appear under "drives". If the drive is not listed under "readers of CD-ROM/DVD-ROM" or there is no such section in Device Manager, then Windows do not see. If windows can't see it then this means that there is no power or that the drive is broken.

  When you pushed the drive back in, the player no longer has much of the book or did you have to push all the way. If the latter, it means that the drive has no power or is broken.

  With respect to the opening of the case, I guess I should ask first if it's a laptop or desktop?

  Tricky

• my door-cd dvd player does not open on my Toshiba satellite. It is used to!

  Suddenly my cd/dvd slot does not open. Any ideas?

  Hello

  Check with Toshiba Support, their drivers and documentation online and ask in their forums
  on known problems.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  --------------------

  For the readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
  a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My DVD player does not open when I click on the button

  Hello

  I hope someone can help me.
  My DVD player does not open when I click on the button.

  I tried clicking on eject on the DVD drive icon in my computer and it comes up with an error message.
  I think I deleted the cookies the other day. Who would have something to do with the problem?

  Any help would be greatly appreciated that I really don't want to send my phone to a technician.

  Hello

  Try to manually open the CD/DVD drive.
  Near the eject button, you will find a small hole.

  You can use a small object like staple and could push gently into this hole.

  Usually, this should help to open the drive manually.

• Mat * one years (uj-840) DVD player does not work properly

  The Mat * one years (uj-840) DVD player does not work properly.
  A symptom of the problem is that the icon does not appear in 'my computer '.
  more and she does not recognize the CD.

  I went to the properties of the drive through Device Manager and saw the following message is displayed:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
  Click Troubleshoot to start the troubleshooter for this device. »

  Following the instruction of the troubleshooter, I tried to update my driver through
  Device Manager, but it tells me that the current driver is the more up-to-date version.
  In the properties of the drive, I found that my driver version is: 5.1.2535.0

  What is a simple problem that has a solution?
  I don't see other actions to find the root of the problem.

  Thank you

  I hope this article can help you - http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm
  Check it out!

• DVD drive does not open.

  DVD drive does not open.  Won't open with the emergency eject button.  Once opened, it will close with the eject / close button.  How can I fix it?  This can cause the drive open suddenly do not?

  Thanks for any help you can provide.

  Hello

  · What is the number and the model of the computer?

  · Do you remember all the recent changes on the computer before the show?

  It seems to be the problem with the computer's hardware. You can check with the manufacturer for assistance on the same.

• CD dvd drawer does not open.

  CD dvd drawer does not open. my computer does not recognize the drive.

  The drive is probably dead. Replace it with a work known to test drive. MS - MVP - Elephant Boy computers - don't panic!

• Satellite L350 - CD/DVD drive does not open

  I have a new laptop, less than a month, but his habit of CD/DVD tray open by pressing eject button. Eject-do a right-click on its icon does not open it no more.

  There is no disc inside, it is visible in the BIOS, no sign of a driver problem in Device Manager. I tried reinstalling the driver, but that didn't help.

  Any solution for this problem would be appreciated. Thank you.

  Hi inecro,

  If the CD/DVD drive doesn t open more I think that you can do anything in this case.

  I can only confirm what writes Akuma. You need to replace the CD/DVD drive and you get a new from an authorized service provider. If your laptop is under warranty you can get a new one for free.

  I had the same problem a few months ago. EPA has replaced the CD/DVD drive in a few days and I come back my laptop. Very fast service and the technicians are friendly. :)

• Satellite Pro M10 - infrared does not work properly

  Hello

  I have a Satellite Pro M10 and my infrared does not work. I downloaded the zip file with the drivers from this site. Then, I uninstalled and reinstalled, but it always happens in the Device Manager under "unknown - SMC IrCC - Fast Port infrared (IR Module: HP). (with an exclamation point). When I look at the properties it says under device status:

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click Troubleshoot to start the troubleshooter for this device.

  However, under Driver Details is said:
  C:\windows\system32\DRIVERS\smcirda.sys

  I extracted the zip file in my home directory of c:\downloads\infrared.
  whatever I do, it does not now. It worked when I bought it, but I have too many things on the system for a new installation. Which brings me to another question. Is it possible to re - install windows without losing all your data, etc.? I did it with other systems (95,98) Windows. But it seems that the Toshiba recovery disc means any wiping.

  Thanks in advance for any help.
  Chris

  Hello

  If your HARD disk contains two partitions and you have saved the data on a second you can reinstall the operating system on the first partition using recovery DVDs.

• Re: Satellite L500 - Internet Explorer does not open

  Hello

  I have a Satellite L500, which is new with Windows 7 home premium configured.

  When I connected for the first time, everything worked perfectly and I was able to browse the internet. After closing, the next day I tried to connect and I tried to open IE, I wasn't able to open IE. IE does not open. In addition, Windows media player will also not open.

  I got once more Windows 7. But the foregoing happens again.

  Someone help me please as soon as POSSIBLE.

  Kind regards
  Anoop

  Hello

  You get an error message if you try to open Internet Explorer or nothing happens to you?

  Have you also tried another browser like Firefox? Check this box!

  Normally with the settings everything should work properly. Have you installed a software after Windows 7 recovery?
  Did you use HARD drive recovery, or how exactly to get Windows 7?

• Satellite L775 - mouse pad does not work properly

  I have a laptop Toshiba Satellite L775. I run Win 7 Home Premium. My mouse pad does not work properly. I also have a Logitech Anywhere MX wireless mouse. I tried the mouse pad to work properly with the key FN and F9, but it does not work. And you really have no idea if that turns or out of the mousepad anyway, subj for another time I guess.

  What does not work, but I have to do is to go to Control Panel then mouse option load that and just scroll the tabs without changing what each time and then close and the touch pad works. But only for this session. If I have my laptop nearby, or turn it off, I have to start throughout the whole process.

  What's past and how to fix this?

  Thank you very much.

  > What's past and how to fix this?
  After reading your ad, I still don t know what is your problem.
  > My mouse pad is not working properly
  How to understand this? What does not work properly? What happen exactly when you start your laptop?