Satellite C Touchpad Scrolls series / moves when the left button is pressed

Similar Questions

• HP Pavilion DV7 laptop: Touchpad, sometimes active, even when the power button is pressed on off (light orange)

  I use a wireless mouse (or a wired mouse) preferably instead of the touchpad.   The touchpad has a power button to press - white light indicates on and off Orange light.    After booting, I usually disable the touchpad and mouse wireless, however, sometimes when you type I realize my palms are contacting the touchpad and the cursor jumps around accordingly.    The touchpad is disabled (orange light) but I can control it with a finger, it works like its supposed to as if it is enabled.     Any ideas?   I have not downloaded a driver updated or do anything to try to solve this problem, as I fear, it could actually cause other problems.

  Update the driver it is the usual Council for problems - that is the solution here?   Has anyone else had a similar problem.    Most of the touch pad problems I've read is in regards to an erratic touchpad - nothing to do with 'on' or 'off' problems.

  HI @WayneCM,

  Thank you for your inquiry. I will do my best to help you!

  I understand that you use the power button / stop to turn off the touchpad.  Sometimes, you will notice that your palm is in contact with it and the cursor is accordingly jump around but the rest light orange, to show that he has disabled.  Here is a link for HP Notebook PCs - using the touchpad and ClickPad (Windows 10). Please review the section on "Open the properties of the ClickPad" in figure 4, you'll see there's a button where you can disable the touchpad, until you want to reactivate it. Please let me know if this helped.

  Thank you! If it helps you to find a solution, please click the button "accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on ' Thumbs Up ' to give me a Kudos.

• The HP printer won't turn on or respond when the power button is pressed

  The HP printer won't turn on or respond when the power button is pressed

  The HP printer won't turn on or respond when the power button is pressed

• printer do not wake off mode 'sleep' and does not turn off when the Start button / stop pressed or pushed.

  HP printer all-in-one B210a win 7 64 bit.

  no error message just don't wake up from power saving mode and does not turn off when the power button is pressed. must be disconnected and then turned back on. works fine until the power saving mode he did go to sleep then not answer the test print command or Toolbox controls.  power saving mode is turned off, but still goes to sleep.

  First, you will need to make sure that the printer is under warranty.  You can do it here.  So, if you are in warranty, you must contact HP at 1-800-474-6836 and the United States in computer science, international users click here.

• Satellite P205: Touchpad does not work when the new adapter is connected

  I got a replacement charger for my Satellite P205 but put it has A 4.19 instead of 3. 95 has, they said that it didn't matter, but since I use the charger, I have the following problems:

  -Does not load properly and turns off after an hour.
  -The touchpad has a mind of its own when the charger is connected (windows opens if hovering over button, through the screan jumps when I try to move it, freezes and disappears)
  -Charger Word to say the laptop plugged in but not charging

  What can I do to remedy these problems, the laptop works perfectly when the charger is not plugged in?

  See you soon!

  Hello

  I guess that the touchpad worked correctly in the past with the former sector adapter.
  Is this good?

  Well, it seems that these questions are related to the new power adapter and I would recommend using a 100% compatible adapter.

  Check the AC adapter s old part number and if the issues could be resolved using this adapter.

• computer just snoring and makes a sound when the power button is pressed

  I have an older Dell which has been upgraded to Windows 8. All of a sudden when I turned it on today, it sounds like a fan is running as well as a series of 4 beeps. Someone has an idea of what's going on? Thanks for any help.

  Hello

  These beeps are a code telling you there is a hardware problem. Check with
  Dell support or a real computer store (the one that made its own in-store service
  on Dell).

  Reference Dell Beep Codes and Diagnostic PSA Chart
  http://en.community.Dell.com/support-forums/desktop/w/desktop/3624.beep-codes-and-PSA-diagnostic-chart

  ====================================================

  Sound beeps are error codes that describe a problem with your machine.
  A continuous beep may mean keyboard (loose or bad cable), of coward, power Board, one
  short or another question according to the system/BIOS manufacturer. Other beep models have
  other meanings depending on the manufacturer of the BIOS.

  Startup and select the CONFIGURATION SETTINGS (BIOS/CMOS) - usually F2 that start you.
  look to see creator BIOS then see here:

  Computer MESSAGE / beep codes
  http://www.computerhope.com/beep.htm

  If my computer beeps and won't start, what do the beeps mean?
  http://KB.IU.edu/data/afzy.html how to troubleshoot Beep Codes
  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  POSTAL Codes beep
  http://www.technick.NET/public/code/cp_dpage.php?aiocp_dp=guide_beep_codes

  Power on Beep Codes post
  http://www.pchell.com/hardware/beepcodes.shtml

  It may have other check so with system Maker or motherboard for manufacturer
  custom systems.
  
  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Notification sound when the power button is pressed

  When I press on the on off button (to switch off my mobile phone) it emits a sound notification

  Unfortunately I went through all the menu of the phone to turn it off but to no avail

  I read in someforum that it is due to an update from sony

  All the solutions! I will be grateful

  Issue edited by Rickard

  There is an option called shortened accessibility accessibility. Can you check if this is permitted.

• Satellite L650-11R - its is trolling when the screen is off

  Hello people.

  I have an interesting problem. In fact, I have a Satellite L650-11R and TV Panasonic TX P42X10Y.

  When I connect the laptop and TV via HDMI and everything works as it should be, games, movies, but everything works fine until the screen of the laptop is open. While it is closed or if you switchmake the TV your main screen or the office, the sound in the movies is bad.
  And not every 30 seconds or minutes rather than continuous. Picture is great, but the sound is a disaster, even a few seconds do not hear a thing.

  The laptop is not even a week, codecs are concerned probably not because the sound works in the movies when the laptop is open.

  Any help appreciated

  PS Sorry for the English

  Hey,.

  To be honest, I never heard such a problem. For example if I connect my laptop to TV cable HDMI I always have good sound quality, even I use two monitors or monitors only.

  In any case, what operating system you have? You use the version preinstalled Windows or another?

  First of all I would update the audio driver. His most recent driver, you can download from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• the site moves to the left when using the links on a page anchor

  I created a point of anchor/link on my site, when I saw and click the menu button, it moves the whole site to the left by 50 pixels while it's scrolling to the anchor point. When I scroll normally with a mouse or a keyboard it will move to the left, only when the menu button. How can I fix it? He began to arrive with the new version of 'sensitive' release of Muse, has not had this problem before. Thank you!

  Anchor points must be to the left of the page guides, NOT to the left of the browser.

  I'm guessing it is something is bound. Try to move them to the side.

• Web page moves to the left when you use the buttons of the anchor

  I almost finished the design of my site in Muse. All previews OK in the Viewer to Muse. When I preview the page in Chrome there is a problem. Everything works great until you use the page with anchor buttons. When you scroll it centered, but when you use anchor buttons all over the page, and especially everything on it moves upward and to the left. Once he goes left, he remains left. Anchor to the left buttons are pined. They stay in place all the time. There is a photo pinned to the right and left in place also. The Web page containing the achor buttons goes to the left when using the anchor buttons pinned. All other pages on the site remain focused. The option "Center horizontally' is checked in the options page for each page. What should I do to avoid that page travel biased?

  There is a void textframe top right of your page. Please see the screenshot below. Detached and reprint should solve the problem.

  

  See you soon,.

  Vikas

• screen moves to the left on hdtv screen when loading games

  With some games, when they load the screen moves to the left, causing the left side of the screen appears on th right as well as a black boarder. im running windows 7 on an emachine 2.0 GB with an AMD sepron (tm) 145 Proccesor 2.80 GHz with Geforce NVIDIA nforce 430 vidieo - and im using a flat screen of 37 "viso HDTV as a monitor

  Hello

  In windows 7, the resolution of the screen during playback of some of these changes of games based on the resolution of the screen, you have provided for the game.

  Method 1:

  Do a right click and go to the shortcut properties and find the box where it says 'run' pass the value normal in full screen.

  If this does not help, configure the following setting and check:

  (a) right click on the game shortcut icon, click Properties.

  (b) on the shortcut tab, go to run.

  (c) in the drop-down list, select expand.

  (d) click on apply to apply the setting.

  (e) click on Ok to confirm the change.

  Method 2:

  Also, I suggest you try changing the hardware acceleration, here are the steps to change the hardware acceleration.

  (a) go to start > Control Panel

  (b) in the window of the Control Panel, click appearance and personalization

  (c) click personalization > display settings, and then click Advanced settings.

  (d) go to the Troubleshooting tab, and then click on change settings.

  Note:

  The settings will be disabled if the graphics card driver does not support disabling hardware acceleration.

  Move the hardware acceleration slider until it is one notch to the right of none. It is the basis of acceleration.

  Click OK twice, and then close the window.

  You can also see this thread and find the solution posted by fix ' that1.guy on Saturday, January 2, 2010 02:06 "user of the problem.

  http://social.answers.Microsoft.com/forums/en-us/vistagaming/thread/2ff8212d-8656-4ced-9da1-21deed2c6c2a 

  I hope this helps!

  Thank you, and in what concerns:
  Naman R - Microsoft technical support engineer.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When the content of the browser minimized site seems to move to the left

  When my demo site is minimized http://fingerprint02.BusinessCatalyst.com/ and I click on a menu item, the page scrolls down and to the left, this could be a simple anchor or a width that I'm missing? It works well when the browser in maximized window, any help would be great, thanks

  Hello

  Try to align all the anchors with the angle on the left of the browser area (all anchor points must be in a vertical straight line). In addition, when you click an item that links to an anchor, he's trying to put the anchor in place near the upper left corner of the visible area of the browser, and it is a normal behavior. It is more probably what is causing the right scrolling effect here.

  See you soon

  Parikshit

• When you type in Firefox, the cursor moves to the left while everything is written backwards.

  Recently, whenever I try to type so that Firefox 9.01, the cursor moves to the left while everything is written backwards. I can normally type into a word document to have done with it and cut and pasted in this message. I use Windows XP. I closed Firefox and restarted my computer twice with no success to solve this problem.

  Maybe this recent thread on the issue even helps.

  • [910552/questions/910552] It started a few days ago firefox will type back

• My HP laptop has had a problem with the uncontrollable from scrolling upward and to the left.

  Hoping someone can help me with this - for a month or if my computer hp laptop has had a problem with uncontrollable scroll upward and to the left. It is now getting worse and happens in all programs, including Word, Adobe, browsers, etc.. Even to type this message is difficult because the cursor periodically jumps to the top left corner of the text box. I tried to attach a new external mouse, but this is not enough. The problem occurs even when not to use the touchpad. I scanned my computer with several anti-virusprograms but no luck. It becomes difficult to use the computer for something else. Even now the down arrows / right does not help. PLEASE ADVISE!

   

   

  Original title: scrolling problem

  Hi Suresh,

  This is a late response to your question, but I thought that I could add more information here.

  From your description, it seems that your PageUp and the keys to the House (or arrows) of the keyboard are either stuck, or failing. These keys usually help access us in applications you mentioned. And since you mentioned that this happens even when the touchpad is not in use, it is likely that this could be the cause here.

  I suggest get you the checked keyboard when using a hardware technician, preferably from your computer manufacturer. That should help you understand better.

  Let us know if you need help with Windows, we are happy to be of assistance.

• Why the desktop icons all move to the left of the screen on any update?

  I place all the icons of the convenient positions, not on the grid. But whenever I do any upgrade of Microsoft or others, all icons move to the left side of the screen, sometimes on the grid and sometimes not, sometimes restart and sometimes not. I'm really tired of having to move all icons when this happens. I even tried locking icons on the desktop, but that does not work either.

  .

  Make sure that the reorganization is not selected when you right-click on the desktop. That said, you can still see this problem if you do not have to line up on the grid.

  This tool will make your icons back where they were if there is no other resolution.

  The intensive care unit icon Configuration utility
  http://funk.EU/ICU-icon-configuration-utility/