Satellite C50-A-1 - white screen after update Win 10

Hello

I have a c50-A-1 satellite and my screen keeps going blank and I have to wait for it to come back on which is really annoying.
I continue to by pressing the keys and the mouse, and it does nothing. In my power settings, it should not turn off.

I don't know if this started after I updated to windows 10.

Please can someone help
Thank you very much

Update the video card drivers from the download page for your model.

Tags: Toshiba

Similar Questions

  • Satellite C50 - no Message device Bootable after update

    I brought my C50 Satellite several months ago and his works fine until the other day.
    I played Minecraft and noticed it was a little laggy suddenly, I checked and realized my phone was doing regular updates, so I closed my game and let.

    After awhile, I went back and noticed a black screen with the message "no boot device please restart" written over and over again, I restarted the laptop but get nothing appear but not the boot device message.

    I'm not very good with computers, so any help will be greatly appreciated.

    Thanks in advance

    Tone

    Hello

    I'm afraid that the HARD disk is defective m and so the laptop isn't able to boot the system.
    You can check in the BIOS.
    All turn on/off the device, press F2. Now on the first page of the BIOS, you should see the ODD (optical disc) details and details of the HARD disk (in the case of defective HARD isn t disc).

    In case the HARD isn t listed, the HARD disk drive may not be recognized by the BIOS and must be replaced.

  • IPad air 1 white screen after update?

    I had recently updated my Ipad (16 gb, Wifi) 1 air to ios 9.3.5. After using it for a day now the ipad screen is empty.

    Can anyone help or problem similar face?

    Hello

    Try a reboot press and hold the power button / stop and menu button hold both down until you see the apple logo

    It may take up to 30 seconds.

    See you soon

  • white screen after update; Unable to get the computer to open even in SafeMode (Sony Viao Vista)

    After you start this morning, had a message saying necessary to revive the updates to take effect.  Rebooted and got blank screen for a long time.  Did a hard STOP.  Have tried rebooting but it just cans.  Have you tried to reboot (drums on the introduction of Microsoft screen), normally in safe mode (with and without networking) - cans after loading files Windows with "Please wait...". ».  Help!

    Download the ISO on the provided link and do a repair of the disc.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    You can make a tool to restart system, System Restore, etc. with it.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista repair disc.

    You can do a system restart tool, system, etc it restore.

    There is not a disk of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • white screen after update w

    Installed series 2 update on computer windows vista laptop. Now can not get it to start up, tried Ctrl alt f8. Andshift f8. Can anyone help?

    Discussions were merged.

    Deleted duplicate.

    Hello

    In series 2 do you mean Service Pack 2?

    @@@@@@@@@@@@@@@@@@@@@@@

    AS you cannot use F8, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

    Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

    Here is the guide to repair Options using a Vista DVD from Microsoft.

    If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

    http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

    Table of contents

    1. Overview of Windows Vista repair options
    2. How to perform an automatic repair of Windows Vista using Startup Repair
    3. Advanced Tools Overview
    4. Conclusion

    If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

    Unfortunately, you have to buy it.

    Here is a link to it:

    http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    This can help you (download files and make your own DVDs) to do a startup repair.

    Vista ultimate is available. Read the information in the lower part of the message on how to use it for other editions of Vista:

    http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

    And here are instructions on how to burn ISO disk images:

    http://www.SnapFiles.com/get/isorecorder.html

    The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

    "How to download a Vista ISO and create a Setup DVD or USB"

    http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html

    "How to create a USB of Vista Installation key '

    http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

    See you soon.

  • Satellite click Mini L9W - B - lost after update Win 10 software

    Hello.

    I upgraded my Windows 10 click Mini as soon as I got it yesterday.

    Everything seemed fine until I restarted and it would not start, there was a problem with the drive of the declaration.

    Finally, after having used the keylogger to unlock the drive, I have reset the machine (asking to keep my files and it reinstalled Windows 10 but I seem to have lost Toshiba programs that were out there.)

    They do not appear in the list of programs.

    Is it possible to recover without restoring unity to Windows 8.1 in the recovery and then put back Win 10 on.
    Took hours.

    Thanks for any help.
    Doug

    If you have checked the option 'keep my files' Windows 10 would still remove applications and settings but it maintains your personal files, such as images, mp3, movies, docs, etc.

    Please check this:
    Limitations of the upgrade of Windows 10
    http://win10upgrade.Toshiba.com/swup...on=TEG&lang=en

    and here you find Toshiba Windows 10 upgrade information
    http://win10upgrade.Toshiba.com/swup...on=TEG&lang=en

  • Satellite P300 - white screen after waking from sleep state

    I'm having this problem:
    The LCD screen may be empty when the computer is "awakened" from the sleep state. Nothing is visible on the internal LCD or an external monitor.

    There seems to be a solution:
    An update of the firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.

    described here: [white screen after awakening from fallback status | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlView.jsp?soid=1642844&moid=1209152]
    -----
    I also found this, but it didn't really help me much further.
    [Satellite P200D and WinXP: no display after waking from sleep mode | http://forums.computers.toshiba-europe.com/forums/click.jspa?searchID=880412&messageID=118143]
    -----
    In fact, I think I'm able to solve myself, and I don't like not my laptop to be gone for two weeks or more. I just need some advice on where to find a correct upgrade. Is - this driver BIOS or graphics? Which version should download, where... etcetera. More tips on how to solve the problem are also welcome.

    -----
    Edit: link and no need for words of line. : s
    Edit2: grammar correction.

    Hello

    > An update of firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.
    If you check the Toshiba document you would see that your Satellite P300 is not related to this issue.

    In your case I would recommend upgrading the BIOS and graphics driver.
    In addition to keep your operating system up-to-date.

    I had this problem under Win XP and a MS patch and an update of the graphics card driver helped solve this problem.

  • White screen after log-in

    I have a white screen after login, but it lasts for about 30 seconds my desktop appears.  Any ideas?

    I ran Microsoft Security Scanner and everything out very well.  I have McAfee Anti-virus works as well.

    Hello LA_Hay,

    Thanks for posting your query in Microsoft Community Forum.

    You did it any significant hardware or change software on the computer before this problem?

    A problem with the card installed on your system, might be a major cause of the problem. So, I would suggest trying the following steps and check if the problem persists.

    Method 1:

    Step 1: Try to start your system in a State of services necessary to the operation and a minimum set of drivers enabled, called Safe Mode.

    Start your computer in safe mode

    Step 2: If you do not have the white screen in safe mode, try to clean the system startup:

    How to perform a clean boot in Windows

    http://support.Microsoft.com/kb/929135

    Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

    If the problem persists, try Method 2.

    Method 2:

    Update your graphics card.

    1. Open Device Manager by clicking the Start button, click Control Panel, click System and Security, and then, under System, click the Managerof peripheral . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    2. In the list of hardware categories, find the display adapters and select the device driver you want to update, and then double-click the device name.
    3. Click the driver tab, click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    For more information, visit the below mentioned link:
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    If you are not able to update the device driver via windows update, you can visit your computer or graphics card manufacturer's Web site and download & install the latest driver.

    Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  • Satellite L775: No download 'BlueRay Player' after update for Windows 8

    Hello

    Please help me...

    After upgrade from win 7 to win 8 it is not possible for playback of bluray on my Satellite L775.
    Where can I download the software for bluray playback?

    Under the following link, it says that Toshiba offers to install the TOSHIBA Blu - Ray player (last third section grey highlight).
    http://www.Toshiba.EU/innovation/generic/Windows8-upgrade-stepbystep/

    I'm looking for the web now for several hours, but could not find this software...

    Thank you.
    Carine

    Hello

    I read in the forum that Toshiba 'BlueRay Player' is a software under license and, therefore, it of not possible to download this software from Toshiba UE driver page.

    If you want to install and use the "Blu - Ray Player" Toshiba after updated Win 8, you must contact the center of Toshiba Support Officer (hotline) and ask these software download.

    There is also another option to play the Blu - ray disc. You could use a tool of 3rd pieces called VLC player (free) that allows you to stream movies.

  • white screen after the signing, the

    I have a laptop HP 2000 who now has a blank screen after I connect. I've removed ask.com because it never works and when I restarted my computer I get this white screen after the signing, the. I can still see my settings or start menu. What can I do to solve this problem. Help, please.

    Hello

    Try the following.

    Boot the computer normally and log.

    Black screen, old the ctrl and alt keys and press delete.

    Select Task Manager.

    Click on file and select the new task.

    Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

    When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of the session the question first and then proceed with the restoration of the system.

    Kind regards

    DP - K

  • Satellite C855 - white screen after BIOS update

    Hello

    I am a beginner user,
    I have Satellite C855
    Yesterday, I downloaded a 'update BIOS"that was sent to my computer.
    Since that my screen is blank, there is a hum in the background.

    I have a recovery back up on my external hard drive, but of course, the screen is blank so I don't know how the product.

    I think I must have downloaded a model or the update was not compatible.

    Hello

    White screen do you mean that nothing appears on the screen?
    You see the start screen of Toshiba, or if you are able to access the BIOS?

    Where this is not possible, try this:
    Disconnect the power adapter, remove the battery.
    Press and hold the power button for about 30 seconds.
    Then connect the two parts (batteries and AC adapter) for the laptop and try to turn on the unit.

    In case this would not solve the problem of the laptop, I'm scared of m the BIOS update was not completed successfully and I think that only authorized Toshiba service provider would be able to help you.

  • Satellite M50 - white screen after login on Win 8.1

    Satellite M50 running 8.1 Win
    After login, download mouse white screen, but nothing else.
    Can run Explorer.exe manually via the the Task Manager for go, but some applications like Acrobat and Windows Mail does not work.

    I searched online and tried all sorts of fixes suggested without result.
    Any suggestions gratefully received!

    I don't know what the problem is here, but you can try to Win8 will stop completely and check the repair options. Try again with the system restore and roll back the OS a few days back. Maybe this will help.

    http://APS2.toshiba-tro.de/KB0/TSB2A03ES0000R01.htm

  • Satellite C660 - white screen after instalation image recovery

    Strange problem. My Satellite C660D-1FM was a bunch of updates from Microsoft (did not updates for centuries as it was used by my daughter and not connected to the internet) and after completing it restarted and I got the Toshiba splash screen and nothing. Holding F8 gives the same problem, tried turning the key '0' and that was the same. Connected to an external monitor and it's the same thing. I can't get into the BIOS and everything seems fine.

    Then, thinking that the HDD is maybe defective I mounted another drive hard and fully installed Win7 on a Microsoft DVD (SP1 and all updates) and everything works. Then, I thought I try and restore the laptop to factory settings by default using Toshiba DVD recovery which Id created. Worked well during the installation, all the installed DVD 3 and he's gone through the procedure installation, portable got at the end when he tried to restart it, rebooted and now back to the same error - Toshiba start screen is ok, but then he'll just empty. To convince me that I wasn't going crazy I then reinstalled Win7 my DVD of Microsoft and he moved very well, did all the updates and worked all day today with no problem.

    Someone at - it an idea of what's going on?

    Hmmm... something like that shouldn't happen.
    Do you use the recovery disc for the first time?
    Have you noticed the same result on both hard drives?

    Problem is that there is not much to do about it and there is no way to change it either in recovery installation runs, or later during the installation of windows is underway.

    Try to set the BIOS to default settings and simply try to reinstall the recovery image.

  • Satellite C50 - A - 16 c - screens went white

    Hello

    I was wondering if someone could help me!

    I have a Toshiba Satellite C50 - A - 16 c.
    When I closed my laptop I clicked update and close.
    A while later I went to turn it back on and the screen is blank.
    It was on, but only in black.

    Then I turned back and turn it back and came, I typed my password for my outlook account and you press on enter.

    Then NOTHING screen went black again.
    I hit CONTROL ALT DELETE and I disconnected and tried to log in again to see that would help, but no, same thing has is spent once again so I just clicked shut down.

    I'm not a person very techi, so if someone could help me put it in terms simple it would be much appreciated!

    Thank you in advance.

    Hello

    Check it please http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm
    Under Advanced options, you can find system restore option. Try to roll back the OS by using previous time saved restore point.

    Maybe this will help. Send comments please.

  • Wanted: White screen after 10 Windows Update - problem even when back in windows 8.1

    Hello

    I've updated to windows 10 and after a few hours, the main screen of my laptop went blank but my second monitor that I use with a HDMI cable still works.

    Here is a screenshot - one screen shows white and I'm typing this on screen 2 (continue below)

    I've updated my drivers in Device Manager but problem persists, here's my profile for screens and link to full

    (continue below photo)

    Complete specifications

    http://Speccy.Piriform.com/results/ZRXCgJC8x3PrsszxBodRVhn

    From my understanding the cables of the screen white screens LCD is still, this problem started after the update of Windows 10 so I'm reluctant to think it's that. My laptop is still under warranty but do not want to send in if he didn't need that I need for work.

    I found some information online saying that a restore Image will not work, but I have an and you can try it if need be.

    Other information found online says that my computer basically "forgot" that I have a main display to get out information in and make the screen and that's why my second screen works perfectly and me might be able to solve this problem with the start of the saving mode and try to fix it from there again I've never done this and don't want to cause more problems doing things like that.

    What could be the best way to go forward with this problem is to say. :

    * Is there a way to check the LCD cables without disassembling the computer. (Don't want to do that, and don't think it's the fault)

    * System Restore will help

    * Where / who should I contact for help in this regard

    Thanks for any help provided and please tell me if you need any other info to help. I really want to to fix the problem rather than take it to a guy or HP

    whitescreenUser

    It's a bad screen. The upgrade of Windows 10 timing is a coincidence. You can continue to use it as a desktop computer with an external monitor forever.

Maybe you are looking for