Satellite C50D-A - screen black and white - but HDMI works

Similar Questions

• My HP photosmart 6510e all-in-one scanning pictures in black and white but the docs are still in color.

  Scan pictures into my a6683w HP Vista in black and white, but the documents still scan in color.

  Hello there ingridt, welcome to the Forums!

  I noticed your post on the scans of your Photosmart 6510, scan to your system from Vista in black and white. I want to offer my suggestions to you to see if they can help you with this.

  First of all, try to launch the HP print and Scan Doctor who is used to fix the printing and scanning problems. You choose the option "Scanning" when the tool is run. It will inform you if the software is completely installed, or if there is a problem, it can not correct. If it detects an error and shows you a red 'X', I suggest then uninstall and reinstall.

  Here are some links to help with uninstalling and reinstalling if you happen to do these steps.

  1. uninstalling the printer software

  2. restart your PC

  3 reinstall: Photosmart HP 6510 e-All-in-One Printer - B211a

  Try a scan now and let me know how make you out!

  Good luck!

• using the color laserjet 3600n - I want to print in black and white, but it prints black and white negative. * beep *.

  using the color laserjet 3600n - I want to print in black and white, but it prints black and white negative.  * beep *.

  I was able to recreate what you see.   I managed to work around it by installing a different driver that is also supposed to be compatible with the CLJ3600.

  Please consider trying this as a possible solution:

  (1) uninstall the driver CLJ3600 by opening printers and fax machines, driver selection and right-click on it and select Delete.  Once it is removed, right-click on an empty space in the windows printers and faxes and select Server properties.  Click the driver tab, click the CLJ3600 and then click on remove.

  One when you're done, restart, and then install the CLJ3500 driver.  This is a previous version of the driver that has been implemented for the CLJ3600 and is compatible with the CLJ3600.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=315862&prodNameId=315867&swEnvOID=228&swLang=8&mode=2&TaskID=135&swItem=LJ-16838-3

  After installation, try printing again.

  The output I have indicates it will print is more negative.  Please let me know if you have success.

  One caveat about this solution.  The Color LaserJet 3500 doesn't support duplex.  Of workaround only works for two printing on the package of basic or the Color LaserJet 3600 N.

• How do I convert a photo to black and white but leave one object in color like a flower?

  How to make a photo I have taken, convert the image into black and white, but let an object such as a flower in color?

  Here is a small tutorial

  Lightroom > topic tutorials > Spot Color (B & W with little color)

• Satellite L650 - 12 p - black and white colors on webcam

  Hello people I have a quick question on my laptop which is a Satellite L650 - 12 p.

  When I bought it, I'm sure that the webcam was color, but now it turned black and white. I tried different settings but cannot retrieve the color. Why it happened and what can I do?

  Someone please help.

  Hello

  The webcam shows usually more colors like black and white only.

  I think that it s just something wrong with the parameters of the webcam. You should check out this article from Toshiba on webcam different parameters:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=59

• My color scheme changes in black and white, but preferences continue to it's normal color.

  On computer start everything seems fine and in color until the login screen. Often there's color for a few moments, but before I'm even able to enter my password of connection the regime change in black and white and stays that way. Sometimes in re-opening a session, it goes through the same process, but the computer remains very rarely in color.

  Nothing specific seems to have changed this problem started by chance and it worsened slowly more often remain black and white.

  
  

  I don't know what I can do to sort this problem, thank you for your time.

  Hello Acantor,

  ·         You have the latest drivers installed for your video card?

  I suggest that you go to your computer manufactuers website and download the latest drivers for your video card.

  See this article which will give you different options to upgrade the drivers:

  http://Windows.Microsoft.com/en-us/Windows-Vista/the-hunt-for-drivers-how-to-find-Windows-Vista-drivers-for-all-your-hardware

  If nothing works, try to uninstall and reinstall the graphics card.

  ========================

  1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
  2. expand "Graphics cards", double-click the entry to the display device.
  3. click on the "Driver" tab, click "Uninstall".
  4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
  5 remove the related entries the display device.

  Reinstall the driver with your driver CD.

  Alternatively, you can try to uninstall the driver from Device Manager, then go to the computer or the device factory site download the latest driver for your network card and install it.

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A100 - 294 PSAA8E: black and white TV without sound picture

  Dear all,
  When I select the TV mode, my TV shows black and white color without noise.
  WHY?

  I have:
  Satellite A100-294
  Part number: PSAA8E-02T014GR

  I check the cable to use it in my CAM.

  Hello

  I assume that you have chosen the wrong settings of PAL/NTSC.

  Please check if you are using the right settings that correspond with your country where you live.

• Beginner - I opened a file HAVE, it's in black and white, but in print preview mode, it seems normal. What should I do to fix this?

  I just open a .ai to a colleague, and the black and white image below is what I see in design mode. Although, when I go to preview before printing, it looks exactly as it should. Please tell us in terms of can, if possible, as I am a beginner. Not sure if this is a setting error or what.

  

  JB,

  If I (put) understand it, Ctrl / Cmd + Y, to get out of the map view.

• scanning black and white but colored wrong scan OK

  OfficeJet Pro 8600 more

  Copies n & B Standalone are very low. Color copies are excellent. B & W scans on my computer appear almost not. Color scans are excellent.

  Any ideas?

  Travis_C wrote:
  

  Hello jkaminky

  When you press on copy and go to the settings adjust you the lighter/Darker? Also are you running the latest firmware? What operating system do you use?

  Travis,

  Yes, the printer was up to date in its fireware. I am running Win 7 Pro (64), but the problem resurfaced surface during a copy operation only one position from the table of the printer. I advanced the lighter/Darker the maximum setting and it helped, but not as 'Normal' of origin. If I chose a copy in color at the keyboard, a B & W document came out excellent. My troubleshooting reveled that the problem wasn't actually in the scaning aspects of printing of the operation.

  I made a number of steps with scaning of troubleshooting. I carried out all them from the table and sent output to a flash drive on the printer. I wanted to keep the remote computer. Even from the keyboard on the preview screen, I could see the very light scans of B & W, I did a number of quality adjustments to their levels of maxminum with an improvement, but not quite to its previous level of quality.

  I was ready to leave when he came for me to restart the printer. I turned it off and unplug the power cord. After a short wait, I reconnected the power and the printer. He was back to his old self well with everything that normal value. It's now a happy printer with a happy owner.

  Thanks for the reply. Take this into account if another comes with a problem on the copies where the copies n & B are very low, but color copies are very good.

  Thanks again.

  -John

• 5.5 to 7 screens black and white conversion

  Hello community,

  I just upgraded to 7 Captivate of Captivate 5.5. I have a simulation project that has been saved in Captivate 5.5. However, now when I play it in version 7, some of the slides appeared black. I've re-edited and those who went away, but now some of the slides deep into the project (after 100 slide) are completely hidden except for calls. Republication does nothing.

  It's frustrating. I have no choice but to re - save these slides?

  If you keep the quality of slides, you must check the quality of the slide. You can substitute the quality of the slide by unchecking this option keep and you have selected above.

  If this does not work, try to uncheck all the compression options.

• What gives a picture of black and white background lines work transparent

  I work in Photoshop CS4 (mac).  Currently, the image consists of a black line on a white background.  How can I give the transparent background image?

  See photo

  

• HP3209a not printing black and white enamel but will display the web page

  I'm on Mac OSX10.8.  My HP Photosmart 3209 has suddenly stopped printing yesterday and had a pop up that says I got printhead problems.  I spent two hours on the phone this morning with two so-called experts feel, the first who said that the problem was with my iMac (he couldn't find it) and the second who said it was a problem with the printer (he couldn't find it).  The printer is connected to an iMac by USB cable.  It will not print e-mail or most of the pages of black and white but now curiously print a web page. BTW, I put new ink in it and did not help anything, and Printhead Cleaner ran about two dozen times.  I try to run an alignment but the page it prints which is for most of the blocks of color blue on half a page is not recognizable on the scanner when I try to run the alignment.

  I think that you always print head problems.  Go to System Preferences > print & Scan.  Click on your printer, click Options & supplies.

  From there, go to utility > Open Printer Utility, then clean the print head.

• printing color when you ask only black and white

  On my Deskjet 6500 all in one, I select black and white only when I print web pages, but it still prints in color.  The screen it displays in black and white, but on paper, it has color.  I use Google Chrome and maybe that's the problem, but I have no idea.

  jvias,

  You try to print in black and white all the time?

  If so, when you mention the screen to print in Google Chrome, down inside your should see 'print by using the system dialog box... '. (Ctrl + Shift + P) ». What to choose.

  When the next screen appears, make sure that your printer is selected and press the button "Preferences".

  On the next screen, it should open in the tab "layout". Then, press the 'Advanced' button and you will see an option there "print in grayscale". She should be currently disabled, but if you turn it on, it should print in black only.

  On the other hand, it sounds like it could be a problem with Google Chrome. Have you tried it in another browser and got the same result?

• function black and white infrared and other settings NB not parpadean not

  Hello, I can not use the black and white infrared or other rgalages black and white because my picture is in black and white, but I do not see the change on the screen. Plug-in photoshop CS6 with United Nations UN IMAC. Thanks for your help because I despair... I think that there is a check box but I don't see that.

  Infra red (and similar) techniques attempt to simulate the effect that would lead to the film when shooting a scene when you use a black and white film special and a filter. If your image is already black and white, there is no color for the technique to vary the density to simulate the IR black and white result. You start with a color image.

• Photosmart HP 6520 - print in color, not black and white

  I have had this printer for some time and configure options so that it used only the black cartridge unless I put it specifically to do otherwise when I wanted to color.  It worked well and I could switch between black and white and color very easily.  A few weeks ago, the printer started to ignore the options I would set and printed in color.  I double checked the parameters, and the printer is always set up for black and white, but now it completely ignores and still print in color.

  I tried the settings at the time of printing, and that indicates that the image in black and white, it still prints in color.

  I haven't added any software or made any changes to my pc.

  Can someone help me with this, please?

  Hi Lulu and thank you for the reply!

  I suggest to download and run the HP print and Scan doctor.  Once you have run the tool successfully, try again the configuration in black and white.

  Please let me know the results.