Satellite C55 - C - 1 M 0 - cannot start Windows after the installation of the Dual Boot

Similar Questions

• Satellite P850 take about 4 minutes to start Windows after the Welcome screen

  Hey

  My SATELLITE P850 take some time after the Welcome screen to start windows, it was like this the first time that I get it.

  Any help or idea?

  thx a lot

  Have you changed anything in your system or maybe the HARD drive? Did you create a partition?
  4 min to complete the startup process is really long
  Have you installed an antivirus software? Maybe a Norton Antivirus?
  I got this software installed on my laptop and it took an eternity to boot the system.
  I replaced Norton Antivirus with free ware software called Avast!.
  Now the Windows starts for 30 sec

• Windows 8 | Cannot start windows after the mode "Eve" [Mobile]

  Separated from this thread.

  Hello

  I have the same problem. I put my laptop (windows 8) to sleep and after a few hours when I tried to open it, it was just a white screen. I tried everything you mentioned (windows + w, windows + x, windows + r), but all in vain. Only thing that responds is increase/decrease brightness and volume. Help, please. Also when I try to stop him, he falls asleep.

  Hello

  Thanks for posting the query on Microsoft Community. You have reached the right place. Let us work together to find the cause of this problem and try to solve.

  Update you the drivers for graphics cards?

  If you have not updated the graphic card drivers, then I suggest you to update the drivers of graphics card on the manufacturers website and see if that helps.

  Troubleshoot video card
  http://Windows.Microsoft.com/en-AU/Windows-8/find-install-display-drivers

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Cannot start windows after update

  After you install a windows update, my computer cannot start windows, when I boot it.  It seems the windows files.  I don't have a recovery disk (lesson).  I have windows vista, is there anyway to restore windows on my PC other than buying the software.  I confess that I do not download updates often... that is why... It's always trouble.

  Hi, MooreTM,

  Brand and model of your computer, please.  Thank you.

  (1) you are able to start safe mode and do a system restore?

  Start the computer

  Start typing F8

  Select Mode safe mode with networking

  What a load Safe Mode, start > all programs > Accessories > system tools > SafeMode

  Select a date and time before the Windows update that caused the problem

  (2) start Windows and tapping F11 key

  If the Advanced Options screen, select fix my computer

  Press enter

  I suggest the site of the manufacturer of the computer and purchase a reinstallation DVD software.  Cost is minimal ($16.-$20.)

• peripheral hardware configuration information cd/dvd player cannot start Windows (in the registry is incomplete) or damaged code 19

  Windows cannot start the cd/dvd drive because the configuration in the registry information is incomplete or damaged

  error code 19

  Have you read that the next page & run fix it tool:

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Please tell us the final result of the correction tool. S.Chatterjee

• Cannot start windows after trying to resize the partition.

  I tried to use utility disk to increase the size of my windows partition, of course, broke TI boot camp should have read this on the community before the trial.

  I use all the solitaire t controls, including the following

  Fdisk e/dev/disk0

  p

  setpid 4

  07

  Pavilion 4

  p

  To write

  There

  That did not help, I don't see windows when I hold down the option key. The windows partition exist again, however, which is good. Also, I turn off csrutil, I use the latest version of Mac OS X

  diskutil list

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 251,0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 165,1 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 85.0 GB disk0s4

  Cs diskutil list

  No logical volume group CoreStorage found

  sudo TPG - vv - r see the/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 251000193024; SectorSize = 512; blocks = 490234752

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 490234751

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 322541752 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  322951392 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  324220928 166012928 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  490233856 863

  490234719 32 table dry GPT

  490234751 1 dry GPT header

  Udo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 30515/255/63 [490234752 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 0 0 2 - 25 127 14 [1-409639] < unknown ID >

  2: AF 25 127 15 - 1023 254 63 [409640-322541752] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [322951392-1269536]

  * 04:07 1023 254 63-1023 254 63 [324220928-166012928] HPFS/QNX / TO THE

  Help, please.

  Please after the release of

  sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

  Since there is no extra partition now, did you remove using disk utility?

• Satellite A200-137 - cannot install windows after the hard disk crash

  last week my a200-137 crashed and now I have the new hitachi 500 GB hard drive on it, even before the accident.
  I have install with Toshiba recovery DVD windows Vista on it and after succesfull installed I have to start windows, it says prepare for first use windows then I have to wait a while and then I get the message that windows setup is not complete. But it is complete!

  After trying to install 3 times with recovert I tried to install windows xp.
  After a few minutes and transering files, I don't get the message no disc found! It is said that there is no hard drive on the laptop!
  But when I start the start menu or the settings menu, I can see the 500 GB Hitachi hard drive!

  So why windows can't find hard disk and why can't I start windowds visat after installing with the recovery dvd?

  > So why windows can't find hard disk and why can't I start windowds visat after installing with the recovery dvd?
  On this virtual path, it is not easy to say why you can not install recovery image. It would be interesting to know if the same thing will happen when you replace the HARD with the same or identical.
  This title was the original HARD drive?
  If possible, try to get original Microsoft installation disc and check if the HARD drive will be recognized by Vista or Win7 and of course if you will be able to install and boot OS preinstalled.

  Regarding the installation of Windows XP Home edition: it is well known that the WXP installation will start properly due to lack of SATA driver that must be loaded prior to installation of WXP begins.
  Check out this forum and you will find hundreds of threads with detailed explanation why this happen and what can you do about it.

• Cannot start windows after resizing partitions

  I tried to resize the partitions of my bootcamp and mac recently

  I can't start windows now

  Get an error on the lack of MBR

  Do you think you could help me out here?

  I read on another thread using GPT fdisk

  These are the results I got her

  Wanted to check before doing anything

  Sanjayas-MacBook-Pro: ~ sanjaya83$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 38913/255/63 [625142448 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639]

  2: AF 1023 254 63 - 1023 254 63 [409640-349609376] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [350019016-1269536]

  4: 0C 1023 254 63 - 1023 254 63 FAT32L Win95 [351289344-273852416]

  Sanjayas-MacBook-Pro: ~ sanjaya83$ sudo gdisk/dev/disk0

  GPT fdisk (gdisk) version 1.0.1

  WARNING: Open with shared lock devices will not have their

  table partition automatically reloaded!

  NOTE: Pass the test failed with the error number 1. It will be impossible to save

  changes to the table to partition on this drive!

  You may have to disable the Protection of the integrity of the system to use this program. See

  https://www.Quora.com/How-do-I-turn-off-the-rootless-in-OS-X-El-Capitan-10-11

  For more information.

  Scanning partition table:

  MBR: hybrid

  BSD: absent

  APM: absent

  TPG: present

  Found a valid GPT with hybrid MBR; using GPT.

  Command (? for help): p

  Disk/dev/disk0: 625142448 sectors, GiB 298,1

  Logical sector size: 512 bytes

  Identifier (GUID) of disc: 55739070-E42E-4414-947D-F1AAD2EB65D0

  Partition table contains up to 128 entries

  First usable sector is 34, last usable area is 625142414

  The partitions will be aligned with the boundaries of sector 8

  Space is free total 1453 sectors (726.5 KiB)

  Starting number (sector) end (sector), Code name of size

  409639 40 1 200.0 of MiB EF00 EFI system partition

  350019015 409640 2 166.7 giB customer AF00

  3 350019016 351288551 619.9 MiB AB00 Recovery HD

  4 351289344 625141759 130.6 giB 0700 BOOTCAMP

  Command (? for help):

  My 5 hours of experience with gdisk commands, etc., rebuild your MBR is, if done correctly as the tutorials tell step by step, sorta safe. Don't take my word for it at all, but I had no problem. Here again, I have really no experience at all. Please allow someone else to answer this question as well.

  Good thing that you are checking.

  Jeroen M.

• Cannot start Windows after log-in initial screening... screen is blank

  Out of the Blue yesterday, I was unable to boot WIndows 7 and I've now exhausted everything that I can find to get help.  Here's what happens: turned on computer, screen load with "starting windows" and windows icon hits the screen.  The login page is displayed (daisy aqua orange screen).  I get my login password.  The next screen is "Welcome" (background aqua), then whites out screen just for one second (really a flash), which he has never done before.  Then around the top of the 'Welcome' window comes with the circle of blue rotation... spins & turns but nothing going forward.  Then a black screen appears after some time that says: "Please wait" in the middle of the screen (never seen it before either).  While blanks on and there is nothing else but a black screen.  I waited forever, thought there was a minor problem and Windows would finally load but nothing.  I'm working now to try to fix it, nothing helps.  I am currently in Safe Mode, which is all I can be right now, and the system does very well in this mode.  I checked the bios to see if my hard drive has been registered, and it was.  I "ve restored my system to 3 weeks (before some updates) and that didn't work either.  I downloaded HP Vision diagnostic on a CD and that ran through the whole system and nothing has been revealed that needed fixing or change.  So I did a HP recovery disk, thinking I can delete my system whole back to factory settings, but I'm afraid to do because I don't know if Windows 7 is on the recovery disk and what will I do if not?  Sorry, it's very long, but I'm frustrated and don't know what to try now.  Can anyone help! ??  Thanks in advance.

  Hi @Annie777,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your desktop off intermittently when you load into windows, that the problem does not occur in Mode without failure, and I would be happy to help you!

  To ensure that this issue has nothing to do with the material, I advise you to follow this document on Troubleshooting overheating and the issue of Auto Shutdown.

  The next step that I suggest is to start the PC in Safe Mode of Windows 7 and uninstall the following updates:

  a. KB2982791

  b. KB2970228

  c. KB2975719

  d. KB2975331

  In addition, you can also follow the steps in this document on the using Microsoft System Configuration (Windows 7). This should help to turn off non-Microsoft services or background programs.

  Alternatively, you can order the CD from recovery for your computer by following this resource on obtaining a HP recovery discs or a USB HP recovery disk.

  If the problem persists, I recommend to perform a backup and restore of your operating system. To do this, please follow this document on the backup of files (Windows 7), and more to perform a recovery of the system HP (Windows 7). This should help to restore your system to the factory settings.

  If your laptop stops intermittently, please call our technical support at the 1-800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

  I hope this helps!

  Concerning

• Failed to start Windows after the installation of updates

  HI, I currently use windows 7 32-bit and have been almost half a year now, nothing was wrong with it until just recently when I installed updates for windows and it goes across restart process. Whenever it restarts after the installation of updates it now in windows could not start and is system launch of repairs etc, when it finishes I cliquerai on end to end and then he launched startup correctly, also, I realize account updates, I have install are successful, when I connect (from the option view update history) , but I get suggestions of exact same update again just after the installation of the updates mentioned only, hope, it is specific help enough, would be much appreciated

  Can you provide the names, the updates that have been installed?

  see this article for when you are offered the same update again and again:
  http://support.Microsoft.com/kb/910339

• Cannot start Windows after trying to install the Vista SP2

  I just tried to install Vista SP2 and now whenever I try to turn on the cpu it gives me a blue screen and restarts. It does allow me to start in SafeMode either. In addition, it seems to be impossible to find my restore points. I was able to stop the screen using the F8 menu and it gives me this error on the blue screen

  STOP: 0X0000007E (0XC0000005, 0X81C223BB, 0X803998F4, 0X803995F0)

  For some reason, when I go to the cmd prompt to advanced troubleshooting guide, I can do, he says that I am the X and not the C drive, if that has something to do with my restore points does not.

  I tried to get the menu of the restoration on C manually through C:\windows\system32\restore\, but nothing was there.

  Any help would be appreciated. I will not lose rather all my data in a reformat.

  Thank you
  Matt

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you installed SP2?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  
  0X0000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
  A system thread threw an exception who did not catch the error handler. There are several individual causes for this problem, including the hardware incompatibility, service driver or defective peripheral system or software problems. Check (EventVwr.msc) event viewer for more information.
  
  Source: http://aumha.org/a/stop.php#0x7e

  
  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:
  
  0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred. [emphasis]
  
  Source & more: http://msdn.microsoft.com/en-gb/library/ms795746.aspx

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; ( Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot start weblogic after the change of the control indicator

  I read the article on http://edocs.weblogicfans.net/wls/docs81/secmanage/providers.html#1187595
  I create 2 SQLAuthenticators, MySQLAuthenticator and testSQLAuthenticator (someone told me that it is not necessary to do so. But I just give it a try). In my weblogic 10.3.5, he has 2 authenticators by default, DefaultAuthenticator and DefaultIdentityAsserter.
  
  1, MySQLAuthenticator = testSQLAuthenticator = DefaultAuthenticator = OPTIONAL, weblogic may be starting
  
  2, MySQLAuthenticator = STATUS testSQLAuthenticator = DefaultAuthenticator = OPTIONAL, weblogic is impossible start
  
  3, MySQLAuthenticator is ENOUGH, testSQLAuthenticator is DefaultAuthenticator = OPTIONAL, weblogic may be starting
  
  4, MySQLAuthenticator = testSQLAuthenticator = SUFFICIENT, DefaultAuthenticator = OPTIONAL, weblogic may be starting
  
  5, MySQLAuthenticator = testSQLAuthenticator = DefaultAuthenticator = SUFFICIENT, weblogic may be starting
  
  6, MySQLAuthenticator = REQUIRED testSQLAuthenticator = DefaultAuthenticator = SUFFICIENT, weblogic is impossible start
  
  7, MySQLAuthenticator = REQUIRED testSQLAuthenticator = DefaultAuthenticator = OPTIONAL, weblogic is impossible start
  
  In the article: REQUIRED - if the user passes the test of authentication this authentication provider, other providers are executed, but may fail (with the exception of the authentication providers with control JAAS value REQUIRED indicator)
  
  Why can't I just put REQUIRED and NECESSARY for the authenticators. Where's the harm?

  You can create a group called administrators in your SQLAuthenticator. In this group you can add users, for example,
  WebLogic or other users.

  But as posted before that not really it is recommended that a group of Admins other authenticators that
  the default authenticator.

  Best is to simply add users of the application to your SQLAuthenticator and leave administrators in embedded WebLogic LDAP.

• Cannot start windows after Windows update

  Dear support team,

  I can't boot my system after updates since yesterday. She is hit on the blue screen of death after giving BAD_POOL_HEADER. It works fine in safe mode, but in normal mode, it is showing blue fill Θcran again and again. I used (F8) at startup boot in the last known configuration it shows the windows failure recovery changes update configuration.

  Please help me to solve the issue.

  Concerning

  Aditya Asati

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Cannot start applications after the stolen credit card

  My credit card was stolen and cancelled. I'll probably get a new card tomorrow. Unfortunately I was not aware of the rejected payment my subscription to Adobe.  Although, if I check my online account, it says I need to update my payment information with my new credit card details or my subbscription stop at funtionning on 3 June. Unfortunately, this information was false. Today, May 9, my apps stop functioning. I am unable to continue working on my video projects.

  Is there a way to access my request, while I'm waiting for a new credit card? 50% chance I can update paying info tomorrow, 90% I can update Monday (Bank holliday gives unpredictable delays for a new credit card)

  I'm sorry to hear your credit card and we understand it takes lost time to get a replacement. When you receive your new card, you can update your account information. Instructions to be found in the following document: http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting-creative-cloud.html

  However, to solve your problem in the interim, you will need to contact Adobe Support. If you open the link above, you will see a Chat option at the bottom of the document. Click on this button. The agent will be the best person to figure out what to do.

• Start Windows after the backup time machine!

  Hey guys

  I have a MacBook Pro MGXA2 and I used time machine for the first time for the backup of the stuff, but after completing the course, my Windows boot option missing from the start menu

  Now I have MACINTOSH HD and a new option named: option to START EFI!

  in disk utility, I have a Macintosh HD and BOOT CAMP

  boot camp disk is always seen in utility dish! I have many pic in the bootcamp drive

  now the questions:

  How can I access inside the car of bootcamp to retrieve my files from disks in windows?

  is it possible to bring back the old windows boot camp player option to the boot menu?

  Thanx

  Welcome to Apple Support communities

  1. You can access your Windows partition with Finder. Simply open a new Finder window in OS X and the access to your Windows partition (often called "BOOTCAMP").
  2. Out of curiosity, what happens if you choose 'Boot EFI'? Note that newer Macs run Windows in EFI mode, so maybe Windows still works.