Satellite C55: error - no boot device

Similar Questions

• Satellite C55-B802 - no boot device

  Hi guys,.

  While working on my C55-B802 Satellite laptop is get hung up as usual, that I just forced my knees to restart by pressing power button .that computer of it appears. "No boot device, please restart" I tried removing the battery and gng through the start by not sure boot and bla bla bla menu that can be done, but no use it please help someone. the sound is like clicking and beep

  It is not easy to say what the problem is here, but I can imagine that the HARD drive is the troublemaker.
  Enter the BIOS settings and check it please if the HARD drive is listed and he acknowledged.
  What you can try is to set the BIOS to the default settings and try to restart your laptop.

• Satellite L855-149 - "no boot device. Please restart.

  Hello!

  Recently, I have been making a mistake on my computer; driver iqle not less or equivalent. The errors were happening maybe once more 2 weeks. Yesterday however, it started happening every hour, then the second, she has restarted since the last crash again.

  Finally windows did not start properly and it came with a recovery menu. I tried everything, except the cloth of hard drive because there's stuff that I need. After a system restore, everything worked, but then it crashed again. This time when I started it went to a black and white screen then reading letters controls the media, checking [fail] media and then no boot device. Restart the system.

  I looked but each video and post is a different error as no found boot device. Insert the disk and press a key. So now, before I lug the PC World and get ripped £ 200 to receive no said that they could not fix the problem, I come to you guys. Please help me! Your My only hope! (A * to make Star Wars reference lol)

  I'll attach some pictures to help you! Thank you!

  http://i.imgur.com/HUCbgfS.jpg
  http://i.imgur.com/uyxSuml.jpg

  Hello

  In general the media error check failure always appears if the BIOS cannot find the boot device.

  In my opinion the various basic scenarios are possible:
  First of all it is possible that your HARD drive is dead and so laptop can not find system
  But this seems strange because in case of BIOS, HARD drive problems would turn to another bootable device as ODD or LAN.

  So a card mother (defective controller for example?) general problem could also be possible.

  To be honest, it of always difficult to establish a fair and definitive diagnosis without verification of the material first.
  Anyway, in my opinion, you should check if the new HARD drive and the new installation of the OS would solve your problem.

  Of course, you can try to start Notepad using a LiveCD bootable disk just to see if you could start Notepad without a fresh install of the OS.

• Satellite C50-A0413 - no boot device - restart System

  Satellite C50-A0413 that was installed with Win8 pr but I didn't like it so I decided to downgrade it so that I can install Win7.

  I formatted the HARD drive and then installed Win7 on the HARD drive. Everything happened until perfect present, but do not forget that the HARD drive was working on another machine, so when I put it back for the things of my laptop went bad because the machine couldn't detect my drive again. Is he didn't keep show no boot device - restart System. What has tried to remedy the situation? Press f2 to access my utility set up 'Security' tab and change the value of the "Secure Boot" option to "Disabled" then the System Configuration but I can't find Boot Mode to change the UEFI to CSM.

  What do I do please help?

  Sorry, but your ad is quite confusing. If I understand you right, you have installed Win7 on X computer and then removed HARD drive in your C50-A0413 Satellite and now you wonder why Win7 won t start correctly or how understand this?

• Satellite L50 - B - "no boot device - please reboot your system.

  This laptop does not start, it gives just the message "no boot device - please reboot your system.

  It looks like the partition table has disappeared.

  There is no support of recovery, no recovery partition, I can access it on the hard drive and no Windows key.

  How can I install windows on it?

  L50 - B PSKTNA-02R016 satellite

  Have tried to start while holding down the 0 key, but no luck.

  This computer is TWO DAYS OLD!

  According to specifications of the laptop, this machine was delivered with pre-installed Win8.1. Yes, there is no recovery media. For years, Toshiba and many other laptop manufacturers offer laptops without disk installation, but original recovery image is saved on the HARD drive, so if everything is OK you can start installation of recovery of the HARD disk image or create a recovery media that you can use for installing the OS.

  If you get your laptop work again thanks to create this media. How this is described in the document s user manuals.

  Recovery partition cannot disappear from the only one. to be honest, it's not clear to me what happens exactly with your laptop.

  Start your machine and press F12 to get into the boot menu. There you should find option enter the configuration. Using this option, you will be able to enter the BIOS settings. Please check if the HARD drive is listed and recognized correctly. by default the BIOS settings and restart your laptop. What happens when you do this?

• PXE e61 pxe m0f error no boot device

  Hello, I just formatted my acer travelmate p253 and when I put the boot order to boot from the disk and rebooted I got the error saying
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit Brodcom PXE ROM
  No boot device - insert boot disk and press any key

  And I have tried every thing ro get my laptop to work I removed the hard drive and it return set the inserted default bios disk win 7 and set the boot order, insert a usb key with 8.1 victory in drive and set the boot order.

  Nothing

  So now, I turn to the acer community for help.

  When you start with your installation DVD or USB pen, press F12, and then select the appropriate boot device.

  Please check if you turn off the option to secure BIOS, boot before trying to install a new OS.

• I have a hp mini 311-1037nr who recently failed to start. data error is "boot device not found.

  My hp mini 311-1037nr does not start. Its running windows 7 and no changes have been made. Error message is "boot device not found. It will not run a hard drive test, gives "the hard disk does not exist '. Tried not to reset the default settings of the BIOS also no luck. any ideas?

  Drive appears you in the BIOS? If not, and if reinstalling it does not help that I assume safely that the hard disk is dead.

  You can also try to download/creation of the various Linux Live boot floppies [Unbuntu, PartedMagic, etc.] to confirm that your other components are not at fault. If you can start and run a live linux OS then your other components of the system may very well.

  You can also remove the drive of your machine and install it as a secondary drive in another computer or a disk to see if you can access it.

  You can also run a HDD diagnosis by accessing your site of hard drive manufacturers and download/creating a diagnostic boot disk.

• Satellite L50D-B - no boot device - please reboot

  Does anyone know what to do when you get only bios saying "no boot device - please reboot" during computer startup?

  Enter your BIOS, make sure that UEFI is enabled, or if you are using a linux operating system allow inheritance.

• ACER Aspire E11 (SD32gb) error "no boot device."

  Hello. I formatted Acer aspire E11 with windows 8.1 USB CD-ROM. It worked fine but the next reboot, it no longer starts and it does not accept either boot from usb, pen or usb cd rom, not same Hirens Boot begins. Don't always says "No boot device" with a picture of an SD card and a magnifying glass. Is there a solution to this?

  Thank you very much.

  OK, back to the UEFI.

  on the BIOS disable secure boot (just to identify possible)

  http://Acer--UK.custhelp.com/app/answers/detail/A_ID/27071/~/how-to-enable-or-disable-secure-boot

  Also check if F12 Boot menu is activated on the main tab.

  Press F10 save and exit, then try to boot from USB CD again.

• New hard disk identified but causes the error "no boot device found".

  Hello

  Recently my computer (Inspiron 15 3521) had hard drive failures, so I ran a diagnosis which resulted in replace me the hard drive. I thought I would upgrade the old 500 GB for a hard drive of tuberculosis.

  Now, when I install the new hard drive, that it translates "found no boot device" I ran diagnostics on it and checked everything, and it recognizes the hard disk. Diagnosis is nothing but the problem persists. Any help would be great!

  The fundamental question: you have installed Windows on the drive?  New disks arrive Virgin - you'll need the support of recovery do you when you have received the system to install the operating system on the disk.

• Satellite L300D - error code 19 Device Manager on the CD/DVD drive

  I have a model of Satellite L300D PSLC0E and you just install Windows 7 upgrade from Vista, everything goes well outside the HL-DT-ST DVDRAM GSA-T50N ATA DEVICE and ATI. With the HL - DT - ST DVDRAM GSA - T50N ATA DEVICE this a driver problem, it is said it seems to do with NTI Backup 4, tried to update for NTI Backup now 4.5 but still no luck.

  With ATI I run updates and reinstalled the program, system check, it shows that it is installed and everything works, but I don't seem to be able to change the display settings most important is 1200 x 800, I seem to think that with ATI there should be more, but not sure because when I start to run a set of changes in the size of the screen to 1024 x 768 , and I can't change anything. Any body any ideas?

  Grommitt60

  Hello

  (1) also tried to remove the capital letters and lowerfilters in the registry? In the forum, I noticed that this does not resolve this error code. On the Microsoft Knowledge Base, you can find a solution for this:
  http://support.Microsoft.com/kb/314060

  (2) I also have Satellite L300D and the maximum screen resolution is 1200 x 800. So you can set a higher screen resolution on internal monitor, this is possible on the external monitor.
  And normally, you can change the resolution of the screen in every game. Check this box!

• My Toshiba not satellite C655-s5082 no boot device

  Can someone please help me that I spent countless hours asked this same question with no luck?  My computer screen reads... For Atheros Ethernet PCIE controller v2.0.1.9 (15/12/09) check the cable connection! PXE - MOF: outgoing Intel PXE ROM No. bootable device - insert boot disk and press any key. Intel UNDI, PXE - 2.0 (build 083) thanks for any help to solve this frustrating issue.

  Hello

  Set the BIOS to boot from the hard drive first. Often F2 as the computer starts then
  look at the screen to enter the BIOS/CMOS (Setup) to change the boot order.

  Check with Toshiba Support, their drivers and documentation online and ask for their
  Forums about known problems.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Drive SMART hard disk error no boot device

  I have a HP pavilion dv7-4170us, and I got an error when I turn it on. I finally bought a new hard drive to replace my hard drive but now nothing works. It says error hard drive SMART, it detects an imminent failure and I needed to back up the content and then run a hard drive test in the diagnostic system. I did a test drive and it says failure with failure id: product GG3SXH-5JW77L-XDOO3F-609AO3 id: XH1O4UA #ABA. I can get anywhere on my computer to save anything and when I turn on the hard disk, it is said to put a bootable device but I did not. Help, please!

  No, I just needed to get revovery media dvd and then I have can use my new HDD is I did fjnd but thanks!

• HP Pavilion dv7 1245dx unable cdrom not read recovery disks errors no boot device, I can recover with USB key and how do I copy to usb recovery CD

  stopped and restarted and all gone, I tried f11 and it doesn't work, my cd rom was unable to read the discs for about two months, I bought a 32 GB usb flash drive and I do not have the recovery disks.  need to copy recovery usb flash disks to recover the laptop

  Hello

  For any problem with the help of HP recovery process, you should contact HP or ask their Support Forums.

  http://h30434.www3.HP.com/

  See you soon.

• HP Envy 360: Boot Device no error found - when you use a HDMI cable only

  Boot Device not found error - when I connect an HDMI cable to my Dell monitor. (I do with this laptop in my another desktop and it works very well).

  "Please install an operating system on your hard drive."

  F2 for HDD diagnosis (3F0)

  Go to hp.com/go/techcenter/pcdiags

  As soon as I disconnect the HDMI and reboot everything is big again.

  I tried with 2 HDMI cables of different (one that works very well in my office and my HP Monitor).

  I really need to use a large monitor when you work... any suggestions?  Thank you! -kelly

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that the computer throws to a not found error message boot device when it is plugged into an external monitor via HDMI. It will be a privilege to help you.

  A remarkable work was done by an extensive troubleshooting before asking the question in the forums of HP. It's always a great pleasure to work with tech-savvy and technically customers sounds like you. Kudos to you for this. I am amazed at your technical skills and the value certainly your relationship with HP. We greatly appreciate you for doing business with HP and consider a privilege to share this platform with you.

  Please perform a hard reset to see if the computer goes off and changes things. Steps to follow:

  • Turn off the computer and unplug the charger. Then remove the battery only if it is removable.
  • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
  • Replace the battery and the charger plug it back. Try to turn on the computer.
  • Please perform a default bios also.

  Please check in the bios if the bios can be extended to this monitor via a cable HDMI to work.

  If please check on another screen as one TV (not another monitor) with the computer for windows startup and the cable connected to the TV HDMI to further isolate the issue.

  Please update the bios, the chipset and drivers of this link http://hp.com/drivers graphics cards

  Please visit these links for assistance: http://support.hp.com/us-en/product/HP-Spectre-XT-15-Ultrabook/5296019/model/5333249/document/c01186408/

  Link 2 http://support.hp.com/in-en/document/c01443463

  Run the system diagnostics without the connected HDMi cable, that if you don't have not done from the above link 2. You can ignore the link 2 If this was done without the connected monitor.

  I really hope that the problem is solved without hassle and things work fine. I hope this helps. Please let me know how it works.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution".

  Now carefully and have a wonderful week ahead.