Satellite C650 - black screen after BIOS update

Similar Questions

• Re: Satellite L40 - black screen after BIOS update

  Hello world

  I have exactly the same problem, as shown here:

  http://forums.computers.Toshiba-euro...ThreadId=35156

  My laptop is a Satellite L40 - 150 (model PSL48E) it came with Vista and BIOS version 1.60

  I updated the BIOS to version 5.50, because I wanted to install Windows XP. The BIOS update process went well and the computer restarted automatically. After the reboot, I entered the BIOS (by pressing the F2 key). I pressed F9 to load the default settings and you exit the BIOS, saving the changes.

  Restarting the laptop and the screen is now completely empty. Nothing appears in it.

  I tried to remove and then reinsert the RAM modules, but it did not help.

  So, I guess the only option is to return the laptop to a service center?

  Why Toshiba do that? They are this deliberately or what?

  Kind regards.

  Hello

  I put t agree with Leolo and put I t too agree with you.
  The point is that there are tow updated BIOS for the L40.
  One for Win XP and one for Win Vista;
  But the two BONES work on with the two BIOS but some functions such as the FN buttons wouldn't work if you n t use good BIOS for the good OS.

  The BIOS on the Toshiba page is not defective. But of course, it is always possible that something will go wrong during the BIOS update procedure because the BISO update is always risky!

  One of my friends has updated the BIOS on this laptop and everything went well!

• Pavilion 15 - p065tx: Pavilion 15 - p065tx, black screen after BIOS update recommended by HP assistant

  System reboot with black screen after accepting the update of the BIOS recommended by HP assistant this morning. AC power on at least three hours of waiting after the process completed successfully with auto update reboots always.

  Power light is on. Wired broadband light is turned on. Light CAP LOCK keyboard and led speaker hold noway.

  Hard reset has been tried 3 times with no improvement.

  External monitor is connected but no signal has been out of the laptop, screen is black.

  Done a few times this page to reset the BIOS setting blindly:

  http://support.HP.com/us-en/document/c02217843

  BEEPS heard when you press F10 or F5 during procedures. But still black screen.

  What can I try again?  Please advice kindly!

  Hi @ sokw,

  I have read and reviewed the post. Thanks for your reply. It seems that bios is damaged, and that is why the computer does not start. As it cannot be fixed by any software troubleshooting, you will need to contact the HP support by phone for the machine.

  HP technical support are available by clicking on the following link:
  
  http://h22207.www2.HP.com/us-en/?openCLC=true
  
  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.
  
  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.
  
  (3) Once finished, click the "Show Options" at the bottom right.
  
  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

  I hope this helps. I would like to know how this happens. I really hope that the problem is solved without hassle and the unit works very well. Believe me, I've done everything I can to help by keeping your interests in mind. Please reach out for questions and I'll be there for you help.

  Just to say thank youPlease click the ' Thumbs Up 'button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• Satellite C660D (PSC1YE) black screen after BIOS update

  I tried to update my Bios on my Satellite C660D portable (psc1YE) last week (big mistake).

  Something went wrong during the update and now when I power on I just get a black screen (LEDS and fan).

  After reviewing, the conclusion is that I damaged the BIOS that must now be blind flashed.
  So I got the hand on a 512MB memory stick, formatted using FAT through windows XP and used Wincris to create a startup disk after you have added the file bios.rom (renamed Bios.wph) which I extracted the last update of the BIOS on the Toshiba site.

  My memory stick has three visible files on it, Phlash16.exe, bios.wph and minidos.
  I plug laptop with battery, DVD player and power disconnected to stick, and hold Fn + B re-connection cable cable, turn it on.

  The fan whirs at full speed, and the USB lights up and flashes then for a minute, as if being read. No matter how long I let on, the fan will continue whirring and the USB is on and when I unplug and put in still works a black screen.

  I tried different sticks, (up to 4 GB with FAT32 format), programs of different startup (for example, the HP utility) drive but still no luck.

  Can someone tell me what I do wrong? I tried to look for a newer version of Phlash16 just in case that was the problem, but can not find one any where (mine is version 2008)

  All advice would be greatly appreciated even if it's just to tell me that I'm wasting my time because the pc is not repairable.

  I can't tell you if you waste your time or not because I n know if the motherboard ROM module is OK or not

  In most cases, it should be possible to reflash the ROM module using the BIOS crisis disk but this disc is available to authorized Toshiba service technicians and as much as I know reflash this methods is not always the same

  However, in some cases it might be possible that the mobo could not be fixed by disk crisis, it would be the worst case

  I recommend you to contact a certified maintainer Toshiba to check guys would be able to use the crisis disk and could test whether its possible to reflash the module ROM
  Is it not would be not possible well in this case you would need new motherboard :(
  But lets hope do ' t you need...

• Satellite A200-130 - had black screen after BIOS updated

  I have Satellite A200-130 I install a windows Vista OS with success and after that, I have saved all the driver I DOWNLOAD and put on a single folder... but then I accidentally open the configuration files of the BIOS that is "setup.exe" with the file "skae180a.rom".

  BOS update starts automatically and I can't cancel it because my keyboard doesn't work simply do not. Then the update fails. I tried to restart my laptop using the touchpad and after reboot I just get BLACK SCREEN and HD led flash just once and my CD/DVD drive is displayed for 5 seconds and nothing happens.

  Now my laptop remains the same... just 'black screen '.
  Can someone help me on this matter? I really need this laptop to be repaired.

  Hello
  I had exactly the same problem with my laptop A200, I spent so much time looking for a solution to this, I tried all the solution I got the net fourms but not at all, 100% bios chip be changed by ASP.
  UOP now I'm not sure that the A200 bios chip can be changed or I have to change all the Mo.
  I'll send it to ASP.

• Satellite C660D-1F2 - black screen after BIOS update

  Hello

  I have download the Bios Toshiba by writing my serial number for my laptop.
  First I checked my current bios and it is 1.5 I think. The news was 1.60. I flashed on WIN 7 64 bit
  First he checked, he erased and then he wrote after the writing process, the laptop is a reboot automatically. But after that the laptop closed and propelled again, he stuck to a blank black screen. Fan, CD Rom, keyboard worked. I think too many USB because when I connect my phone to the laptop, my phones battery charge. Please I need help. I am out of warranty.

  What I've tried so far:
  Take out the battery
  Power cable plug out
  Hold down the power button / stop 1 minute
  Connect the power cable to rear
  Press the Power button
  Solution: Same; Black white screen

  Satellite C660D-1F2 (PCS1YE)

  Hello

  I'm afraid that something goes wrong with the update of the BIOS, and now BIOS is damn Mr. usually in this case you need professional help from Toshiba service but it can be quite expensive.

  On this forum, you can find many discussions where people have described the same problem. Some of them have been able to solve this problem. a very interesting thread, you can find here. Check it out please.

• Satellite A200-1fj - black screen after BIOS update

  Hello guys,.

  I'm planing to update my bios for this version

  http://support.toshiba-tro.de/tools/EULA/calleula.asp?ID=63108

  and my pc got little froze and lag then I close the program that has Flash my bios and restart my turn then black screen... I search and found this thread talking about the BIOS recovery and there seemed not workin for me (I use my 8 GB flash memory) and just do Fn + B when I press the power button to start and then the power led becomes orange... and nothing happens...

  Everyone please provide me the bios file just for this model and give me a clear instruction to Flash my bios with my flash (8 GB) memory

  W8 your replay guys, thx

  + The message was edited: link removed - unauthorized 3rd party Forum +.

  If the BIOS update was not properly flashed, the ROM should generally be flashed with a disc of crisis of the BIOS.
  This can be done by authorized Toshiba available in your country.
  Then get in touch with the ASP to solve this problem.

• Satellite L450 (PSLY0E) - a black screen after BIOS update

  It seems I have "brick" my phone during a bios utdate that went wrong... black screen as suspect: o.

  The laptop is a Toshiba satellite L450 (PSLY0E)
  The new bios image is named "bwaa150a.rom".

  Anyone know if it is possible to recover the bios of the flash or floppy drive, using a sort of toolfrom recovery inside the bios chip?... .or something?

  Anyone know who is the manufacturer of this bios?
  If I rename the bios image during a recovery, what 12xxxxx be named?

  To my knowledge, it is possible to reflash the EPROM module using the special procedure of crisis of the BIOS. But this crisis BIOS disk for Toshiba computers laptops isn't available for download.
  This must be done by authorized maker Toshiba.

  But I also read in the forum about those who tried some discs of crisis 3rd party BIOS.
  Sometimes it worked, but in most cases, you need advanced help technician.

  However, to use the forum search option advanced to search for similar topics on crisis disk BIOS. Otherwise, as I said above: you last chance might be the ASP.

• Satellite C855 - white screen after BIOS update

  Hello

  I am a beginner user,
  I have Satellite C855
  Yesterday, I downloaded a 'update BIOS"that was sent to my computer.
  Since that my screen is blank, there is a hum in the background.

  I have a recovery back up on my external hard drive, but of course, the screen is blank so I don't know how the product.

  I think I must have downloaded a model or the update was not compatible.

  Hello

  White screen do you mean that nothing appears on the screen?
  You see the start screen of Toshiba, or if you are able to access the BIOS?

  Where this is not possible, try this:
  Disconnect the power adapter, remove the battery.
  Press and hold the power button for about 30 seconds.
  Then connect the two parts (batteries and AC adapter) for the laptop and try to turn on the unit.

  In case this would not solve the problem of the laptop, I'm scared of m the BIOS update was not completed successfully and I think that only authorized Toshiba service provider would be able to help you.

• Satellite C660D white screen after BIOS update

  I ran the update of the BIOS on laptop Satellite C660D PSC1YE recommended and he appeared to succeed, but when it restarts the screen won't turn on. I tried a few things to fix, but nothing worked.

  Tried:

  • connect an external monitor via VGA - white too
  • remove the battery of the CMOS button
  • removing a hard drive startup, to replace again
  • a short-circuit the J1 jumper under RAM slots

  What else can I try?

  Here is the windows bios update program:
  http://Support1.toshiba-tro.de/Tedd-...0601184846.zip

  Try to start with the battery.

• Yoga 2 Pro Black Screen after Bios Update

  Only, I have formatted my yoga 2 pro, downloaded the drivers and ran the update of the Bios. I followed the instructions on playing ran me the .exe, one click on next/ok until you restart the laptop and if I'm not mistaken a menu red with a progress bar appeared. At this time, I left and when I came back a few minutes later, the laptop is on, the lighting of the screen was on but the screen was black, the backlight of the keyboard was also turned on and everything else was off. Lights on/near the switch indicating if there turned on and connected to the AC are off.

  It was like that for more than 30 minutes now, no sign of progress. This happened to someone else before? I'm not very keen on must turn off or unplug the laptop while flashing the BIOS, but at this point there is not much else I can do.

  I found the answer to my problem to

  http://forums.Lenovo.com/T5/idea-Windows-based-tablets-and/yoga-2-BIOS-update-crash/m-p/1322487/high...

  Now that I found this post, I remember the instructions telling me to turn it off manually when I've updated the bios earlier this year. However, these instructions don't mention about it, maybe they should be updated?

• Satellite L40 - 14 H - black screen after BIOS update

  Hello!

  I have laptop Satellite L40 - 14 H (PSL48E). I installed Windows XP, it worked fine, except the keypad is lit permanently so I couldn't enter a few symbols. I decided to install the special BIOS for WinXP, which downloaded from the Toshiba web site. The PSL48x model is in the support list. Change the windows flashing and reboot, I entered the BIOS to see what has changed. I saw nothing new, so I leave the WOOD and restart again.

  Since then, turns on the phone, but the screen is not, it is black :-(((
  Please help me, how can I save to live?
  Thank you, Eugene.

  Tried to connect it to an external monitor?
  If this does not help, you will need to go to a SPA to take a look at your machine.

• Satellite L450D - 13 X - blue screen after BIOS update

  I have the blue screen after BIOS update. Satellite L450D - 13 X worked ok before that ideas?

  Is there contact information for Support TOSHIBA?

  Hey,.

  > Is there any TOSHIBA support contact information?
  No, becaue, must contact an authorized service provider. Guys can help on any hardware and software problems and can also order spare parts from Toshiba.

  Here is a list of aspic, where you can look closer:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

  Good luck! :)
  ?

• Aspire R7 572 G having a black screen after windows update 8.1. What should I do

  Hi all

  IM wondering, anyone having this problem before, Im of the problems with this black screen after startup, it happened yesterday I think microsoft needs to have updated some drivers rendering my black screen after startup. Initially, I thought it was my SSD, but it turns out that I can't get into Safe Mode.

  I read more info on this problem related to the other PC and try the preferred method of 'disabling' drivers Intel GMA HD. It worked, however, this means that the main driver is now reduced to a graphics card video standard with vram limited.

  I tried to roll back and even redownloading and reinstalling the intel driver in version VGA_Intel_9.18.10.3215. The blackscreen after boot have yet taken place. I missed something?

  This is an old version of Intel drivers.

  Try this, after uninstalling the old pilot Intel:

  http://global-download.Acer.com/GDFiles/driver/VGA/VGA_Intel_10.18.10.3316_W81x64_A.zip?acerid=63519...

• Satellite M70 - black screen after the installation of recovery

  So far, what I did is put in the Recovery DVD - ROM product. Then when my computer restarts I was invited to restore my computer failing and said. After that he went through this process, that he told me to remove the disc that I did. Now he only get a black screen after the Toshiba screen that gives me options f2 for Setup and f12 for options.

  I don't know what to do now to make my laptop works again. Help, please.

  Hi Zach_1,

  Have you tried to launch the installation of recovery again? Maybe that something was wrong during the first installation, it might have arrived
  Then retry the recovery facility and see what happens.

  If it doesn't work you should try a normal Microsoft disk so determine if the problem is related to hardware or recovery disk.