Satellite C650 does not start with android phone on

Similar Questions

• Satellite C650 does not start - error PXE - M0F

  Just bought a Satellite C650, get it home and my son decided to stop the whole upward as he ran.

  Now, we get the error below:

  Check the connection of the cable!
  PXE - M0F: Exit Intel PXE ROM
  No boot device - insert boot disk and press any key.

  We received no drives, nor a manual with adequate instructions and can't find anything on the web for help.
  Toshiba closes for the day.

  Hoping that this forum could give me an idea.

  Hello

  PXE error is displayed because the laptop has attempted to boot from LAN.
  Why it does not start from the HARD drive but LAN switches?
  I think the HARD drive is defect.
  Perhaps its also not recognized in BIOS.

  Switch on and press F2. This allows you to access the BIOS where you could check if the HARD drive is recognized. I guess it must be mentioned on the first page.
  If it s not there, then it means that the HARD drive is dead and must be replaced.

  I assume that the warranty is still valid; Therefore, you should get in touch with Toshiba ASP in your country for replacement.

• Satellite A30 does not start with the USB device connected at boot time

  Hello

  I have a Satellite A30 and sometimes it does not start.
  After turning on, not even the BIOS starts.
  even if sometimes the BIOS starts, but the OS does not load.

  I figured out that its related to USB devices connected at boot time.
  If no USB devices are connected, it starts without a problem.
  Even if the start-up is suspended, as soon as you unplug start it BIOS USB devices.
  Its ok to connect USB devices later, once the system has started.
  I disabled "removable devices boot" and "network startup."
  just in case, but it makes no difference.

  BIOS is version the most recent (1.70) and it comes up with all kinds of USB devices.
  printer, mouse and (self-powered) external USB hard disk.

  Is this a known issue?
  There is no known workaround solution?

  Hello

  I put t know why this happens, but it has to do with the BIOS.
  The same thing happened on my old laptop. I couldn't start my unit while the USB printer has been turned on and connected.
  The only solution is to disconnect the external USB device during the boot process.

  RSY you should check if the order of boot in the BIOS has been on the HARD drive first.

• SOLVED: Why don't Satellite 4090XCDT does not start with DVD-R/W drive?

  Hello
  as I said in the other thread that has already been closed, I bought a used Satellite phone who would not start of 3rd party DVD - RW (Quanta Storage SDW-042) included, even if Windows couldn't read well enough.

  I found out why, starting with the help of the user answers in the other thread.

  In the user manual, there is a description in the capitel on the configuration of the system about tconfig, which proved to be a valuable indication: HDD = Primary IDE (1F0H/IRQ14) (...), CD = secondary IDE (170 H/IRQ15). Compared to my desktop, it seems to me that two readers need to be masters on no. 1 and no. 2 cable, not as master and slave on the same cable from HARD drive. So, my CD-ROM would probably be master.
  Then I did the research further into the issue and found out, that there is no CD-ROM where select things cable if they are master or slave. Then I found in
  http://www.dschen.de/laptop_brenner/ a note in his Toshiba Satellite Pro 4290, seemed to be no Cable Select and his planned book on the CD (or DVD player, he wants to use) as a master.
  CSEL means that 47 Pin is connected to the Earth, which he did by applying a drop of Tin from Pin 47 to 49, pine, which is also Pin 47. I tried the same thing and disassembled the DVD drive that was in my notebook. (My record to disassemble my laptop and all editing again properly is now gone in 50 minutes). And know what, my Satellite 4090XCDT can now boot from the DVD-RW!

  To perform the task, I needed a screwdriver of the watchmaker to open the DVD RW (three live, then you need to insert a PIN to open the tray and see the back), a 12 Volt type iron pin solder for SMD and I ordered the strap of welding with a stereo microscope, so this task is not negligible. See the link mentioned to know what pins are bridged (sorry, the website is in German but the picture is clear: in the top row of pines, only you can see, the 2nd and the third from the right). And of course with a replacement part "scrap", you could give your laptop a second life, but you run a risk, because you may not know what you have, master or slave (for firmware or hardware), broken in any case, select cable - and one other Web site indicates that they looked up to 17 variants of firmware in exactly the same drive , depending on what laptop, it was intended for use.

  Nice display. Thank you very much.

• Satellite A200 PSAF3A does not start with 4 GB

  Hello

  I have a model A200 PSAF3A-0QH01N.
  I've been led to believe that it supports 4 GB of RAM but does not start with 4 GB, freezes at the toshiba logo.
  Also have A100 running new 4 GB RAM works very well in this machine. Have updated BIOS did not help.

  Any advice?

  According to THIS specification that your laptop can be upgraded up to 4 GB of RAM.

  Downstairs you can also find the part number of the compatible RAM. List of the memory modules are tested and working with your laptop.

  Where have you bought?

• Re: Satellite L30 does not start after adding another stick of 1 GB memory

  I bought 1 GB PC4200 533 MHZ DDR2 SODIMM memory module for my Toshiba Satellite L30 - 10v (PSL33E) to make it 2 GB. After you have added the 1 GB modules Satellite L30 wouldn't start. With only 1 GB, that it starts ok, with the other 1 GB origianal only boots ok. (The two modules are ZCE6 430 - K4T1G163QB Samsung 1 GB PC4200 533 MHZ DDR2)

  The two modules of 1 GB boot not together. I noticed that many others have had this problem. (please see
  This [t-22984]. post)
  On this forum, someone bought the CT12864AC53E memory module which works, however I can't find this on the site of Crucial.
  I've heard other purchase the sticks of memory CT572238 and CT572234 and have the same problems.

  Memory Advisor says determinative buy the CT572234 memory sticks.

  I have also updated the bios to V3.10, still does not start with the two modules.

  I'm ready to buy 2 new modules, but what 2x1GB memory works?
  Any help would be greatly appreciated...

  Post edited by: quigs1969

  > 1 GB strips boot not together. I noticed that many others have had this problem.

  For me it s case;
  The two modules don't work together
  Seems the modules are not compatible there is only one solution. Replacement of RAM!

  Try other RAM modules.
  I bought a few modules from Kingston and made good experience

• Tecra A6 does not start with battery only

  Hi all
  I'm having a strange problem with a Tecra A6 I picked up recently at the refurb because it does not start with a battery only: it starts only when / sector is also connected, but eventually DΘmarrer on battery alone (and works fine) with the power cord removed shortly after pressing the power button. It's just on battery alone, I get no answer by pressing the power on button (so the power outlet must be set at this first stage or I don't get anything).

  Now I'm wondering if maybe it's the battery voltage? It seems that there are 2 options for this model, a 10.8 v and the other at 11.1V. With loaded Windows and Hardware Monitor reports running the battery is at 0% wear level and cool until completely (so I don't think that the battery is faulty), but it indicates that the battery is running at * 11, 1V, * but the battery installed is actually the * model 10.8v*. Could that prevent any power on only to batteries?

  More information on the model I have:
  Tecra A6-PTA60E-0EJ013EN
  CPU: Intel Core 2 Duo T7200 2.0 Ghz
  2 GB of Ram.

  Thanks in advance for any help on this one. Essential, I would like to know is if I have a 11.1V battery to run this model correctly (and get it) on battery alone. If the voltage makes no difference so I guess it must be a weird motherboard problem and I need bother not buy a new battery.

  > Will have to buy another battery and see if the same thing happens (I'll know then if it is the motherboard), but in the meantime if anyone can let me know if the voltage is serious I would appreciate it.

  To my knowledge, the batteries for Tecra A6 should take in charge 10.8V
  There's piles more strong for example 5200mAh but the voltage must be the same 10.8

• Satellite A110 - does not start

  Satellite A110 does not start on power, but the HD load no start fan display running, but in a few seconds it stops.

  Help, please

  Hi jinskywalker,

  No display?
  No beeping?
  Nothing?

  In this case, you should read this article:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

• Satellite P300 does not start immediately

  Hello

  My Satellite P300 does not start immediately. I have to press the button start ca. 20 or 30 times.

  No results?

  Hello

  I have the Satellite Pro P300 in front of me. I use it almost 4 weeks now and I press the Start button, very gently and keep it down to the second or two and laptop starts fine everytime I want to start it.

  Do not press the button quickly several times but slowly and keep it down for a second or two.

• HP 250 g3: hp 250 g3 does not start with windows 8 ir says the GPT partition style

  HP 250 g3 does not start with windows 8, it is said GPT partition style and custom boot that I have fomarted the hard drive... Please help

  Thnx man always the same thing, but I deleted all partitions and then I was able to start...

• HPE-510 t does not start with AMD over-pants W5000 (Windows 8.1)

  I just bought an AMD over-pants W5000 (TDP = 75 W) to replace my nVidia Quadro 600 (= 40 W TDP) in my 2011 HPE-510 t (i7-2600, 12 GB of RAM). Dell U2913WM monitor.

  My machine does not start with the new inserted card. I upgraded a 450 W Antec VP450F 300W stock power, but that has not changed the start situation. I tried DisplayPort and Dual-Link DVI - D.

  Someone at - he was able to get the AMD over-pants working in an office of this generation HP?

  Thank you

  Mike

  Hello

  Open RUN (win + x key) and enter: MSINFO32

  What level of your PC BIOS runs?

  If you can not enter the BIOS at startup so be sure that your keyboard is plugged into a USB 2 port.  Otherwise some time in Windows 8 go to Advanced Options.  See the image below.

  

• Windows does not start with the second internal HDD connected

  Hi all, I recently got around a few major problems with a new buuild, but I found another issue. Windows does not start with my connected storage disk.

  hard drive 500 GB of important data that I can't save on it and need access. It is a hitachi drive, which works fine on other systems but usually works in this one. any suggestions are appreciated, thanks in advance

  fixed the problem of swapping of sata ports and reconnect the cables, thanks for the advice but

• Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool.  Any help would be appreciated?

  Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool.  Any help would be appreciated?

  Same fixed.  At executed license repair tool, Adobe - Adobe licensing repair tool, and it fixed the problem.

• Satellite Pro L50 does not start with 8 GB

  I have a brand new L50 Pro of Satellite (PSKK3A-001001)

  Config of RAM is default of 1 x 4 GB memory DDR3 12800 1 use slot 1 slot free
  I removed 4GB and install 1 DDR3L 12800 8 GB but it does not start.
  The form of State capacity 16 GB so with 2 slots logically, that means 2 x 8 GB cards.
  He also said DDRL, which I assume is the correct type.

  The 4 GB mark was Hynix and the 8 GB is Apacer.
  Anyone have a resolution on this or know what the problem is?

  On this forum you can find many threads where people describe similar problems. In most cases the problem is compatibility modules, especially if Ram needs to be upgraded with modules produced by different manufacturers.

  According to the specifications of the laptop you need DDR3L memory (1600 Mhz).
  Talk with your dealer and ask if there's Kingston compatibility module. Kingston offers high quality and 100% compatible memory modules.

• Satellite Pro 460 does not start with the new drive in

  I recently received a Satellite Pro 460, but he had no hard drive.
  It starts great without a disc in but as soon as I put a new hard drive in it does not start.

  I thought that it might be again a hard drive, so I pulled out my old Toshiba Satellite with my old drive to work, and yet, it does not start.

  Someone has any ideas why this is and what I can do about it

  I think that you can not do much. Satellite pro 460 CDT, for example, comes with 2 GB of HARD drive. If you try to get it work with similar HDD without success, it may be defective IDE port on the motherboard.

  What HARD drive you are trying to use on this good old classic?