Satellite C650 - internal flash disk does not start

Hello

I need help

I have a SDHC 16 GB
I installed an operating system on it.

When I boot from sd usb adapter it starts without problem by selecting usb or floppy drive in the boot menu (F12 at startup laptop)

When I try to boot from USB internal it boot doesn t
I tried every option start there is

I installed the operating system while he was in the internal flash player that the sd card is recognized by the operating system once started

Thank you

> When I try to boot from USB internal it boot doesn t
What do you mean exactly? You are not able to boot from the internal HDD or what?

Tags: Toshiba

Similar Questions

  • DVD - ROM Toshiba Recovery disk does not start

    Hello

    I'm having some problems with my Toshiba Satellite M40, and I decided to reinstall the OS with the recovery of the dvd disk, but the disk does not start.
    When I'm on windows, the cd/dvd driver works perfectly, and I don't think that the recovery of the dvd disk are damaged.
    I have already tried:
    1. by pressing the "C" key to start the computer
    2 - press "F12".
    3 - Enter the BIOS Setup and select cd-rom to start first

    But the computer starts up normally and no error message appears

    Can someone help me? I don't know what to do

    Thank you

    Hello Palma

    Can you please test it with some other bootable CD or DVD? It will be interesting to know if this happens with the recovery media only or even with other bootable media.

  • Satellite A200-1 body weight does not start

    Hello

    I have a Toshiba Satellite A200-1BW model that frooze all to use and would not start again.
    I have checked all the power drive options very well.

    I have the blue AC power led on and the orange light but pc does nothing. I tried to power up without battery with AC, but always the same question.
    No fans don't come on etheir. PC won't in the start-up phase, and nothing appears on the screen that is constantly empty.

    I don't get the HDD 200 GB startng so I swapped it for a work of identical spare but the pc still does not start.

    My only conclusions are that I have a dead motherboard or a power problem internal.

    Its the real frist problem I've had with this laptop so am just checking to see if anyone out there has had the same problem or knows all the patches, I have not tried.

    Yes, that sounds like a serious hardware failure.
    Looks like the motherboard, GPU, or another party on the mobo may be defective.

    What about RAM modules? Did you check both?
    Please do

    Otherwise if there s no RAM issues then you will need a professional technician help.
    At the moment I put t see any other solution you :(

  • Satellite L505 - 10 M - fan does not start

    I have a problem with my Satellite L505 - 10 M.

    Suddenly the fan does not start over and because of this, the laptop get quickly overheated and stops. I installed Windows 7 top me, quite some time ago, and this time it was 2 weeks ago while it just happened this evening. I have not installed anything new and nor I did something special with him, he just does not start fan more.

    I checked this forum, cannot find anything either, searched and could not find any problems with Linux and the fan, but not Windows (it does not start at the start of the bios either).

    If anyone has a thought, a similar experience or a solution, it would be really useful

    Greetings,
    JanPieterz

    Hey Buddy,

    You have installed Windows 7 Microsoft disc or Toshiba Recovery disk?

    Well, if the fan doesn't start anymore, you can t a lot and I think that the fan needs to be replaced.
    What you can do is load default settings in the BIOS (press F9 key in the configuration of the BIOS) and save settings. Also clean your laptop using a jet of compressed air, maybe the fan will be blocked by the dust.

    If he doesn t it work s time to contact a technician for laptop. If your laptop is under warranty, the repair will be free. :)

  • Recovery disk does not start

    I'm helping a friend with his HP CP61-313US laptop. Somehow, it's not boot from the hard drive. It attempts to load Windows, then crashes, gives me the black screen where you can choose the safe mode, safer networking, etc.

    He will not start in safe mode or other options. It does not start from the last good configuration.

    I ordered the HP recovery discs and disc inserted one of the stimulus. It won't boot from the CD. I went into the bios options and set the CD drive as the first option. I did both of in the settings BIOS F10 and F9 startup command settings. I hear work the CD player, but he keeps trying to boot from the hard drive.

    I never get a message that says something like "press any key to boot from the CD-ROM."

    Is there anything else I can do to force startup from the CD/DVD?

    Is it possible that I can copy this HP on a flash drive recovery myself and try to boot from a flash drive. I guess it is possible that the DVD/CD player is broken. My friend who owns the computer used rarely to the reader.

    Is there some other bios setting I can use? Either by the way, I ran the memory and hard drive diagnostics and they passed.

    I have determined that the DVD drive on this laptop is bad or is about to fail. I tried to create a Windows repair CD and was able to read the CD. It would give me the message "Press any key to boot from CD or DVD" that I was not getting with restore disks factory HP. I put restore HP factory disks in another computer and tried to copy them. I thought that, perhaps, if my drive was any failure there is something on the factory records it would not read but maybe a freshly burnt disc copy can read. It would be almost from the start. He would try and then getting errors of e/s on the copied version of the disc. I came to the conclusion that I could find other uses for a drive DVD external USB and since they were only $40 I have advanced and bought a. I now restore since the original HP recovery discs successfully using the external DV

    Key USB D. I had to upgrade the bios to boot from the DVD USB drive, but it seems to work. So you can consider my original request as 'resolved', but I can't speak for other users who have hung on this thread. But if someone has trouble with their discs original HP, I would suggest trying to make a copy of their, and maybe a copy will work. The copy almost worked for me.

  • Satellite C650-I5011 - brightness adjustment does not work

    Hello

    I have a Toshiba C650 - model I5011 with Ubuntu 10.3. I have a problem that, even after having pressed the Fn + F6 key, the brightness of my change of does'nt LCD.
    It remains the most.

    I installed daemon Toshutils both hotkey. My volume control key (on another digital) works perfectly well but nothing of all the function keys work. Pls help.
    Also, I got errors when installing Ubuntu on my laptop because of who I had to permanently disable ACPI, otherwise it does not start. Here is the result of lspci:

    00:00.0 Host bridge: Intel Corporation Core CPU DRAM Controller (rev 02)
    00:02.0 VGA compatible controller: Intel Corporation Core processor Integrated Graphics Controller (rev 02)
    00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
    00:1 a. 0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
    00:1 b. 0 Audio device: Intel Corporation 5 Series/3400 Series Chipset Audio high definition (rev 05)
    00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
    00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
    00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05)
    00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
    00:1E.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
    00:1F.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
    00:1F.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
    00:1F.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
    00:1F.6 Signal Processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
    01: 00.0 Ethernet controller: Atheros Communications AR8152 Fast Ethernet (rev c1) v1.1
    02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)

    As you probably know Toshiba doesn't support Linux and you will be lucky if someone here would be able to offer assistance.
    I recommend to visit some Linux forum and ask there. The Forum of Linux you have better chance of assistance with that.

  • Win 7 repair disk does not start

    H8 1380 t CTO, Intel i7 3820 processor. 10 GB of DDR3 Ram PC3-12800 memory. FRIEND bios (UEFI), Version 2.14.1219 (current).
    Pegatron Motherboard-IPIWB-PB (Pittsburg) Audio Beats. AMD, the Radeon HD 7570 1 GB graphics card.

    I need some advice:

    Can you direct me to a HP solution or tell me what I'm doing wrong?

    I opened Control Panel - backup and restore and set up a backup schedule Win 7. Created a backup drive, and according to the instructions, a system image on a separate hard drive. This has been created successfully.

    I have so successfully by the operating system, created an ERD in Windows 7 bootable, the screen guests said that this disc could be used to start the computer when you cannot start the operating system due to serious errors. This disk allows you to restore the system from a system image created using backup and restore or use other recovery tools to correct the problem that prevents windows from starting.

    The system does not start on this disc. I did two restorations of the factory and went through the steps above, five times without success.

    When you try to start the system with the Windows 7 repair disk the following steps were taken:

    1 Win7 disc repair, system rebooted, you press ESC, selected the Boot Manager, select DVD disc and received the following message: boot nonsystem disc error.

    2 rebooted system. escape, Startup Manager, then selected sata2 with no luck. Same error message as in (1).

    Thank you

    Hi Dave,.

    Thanks again for your help.

    Bought a WD a terabyte HD Executed a copy sector by sector, using Paragon... It was quick (about ten minutes-amazing) and I answer to you, now, using the WD HD clone.

    Awesome! I finally took possession of this computer.

    I would say that the problem has been resolved. Windows 7 repair disc will not work on EFI systems and here's workaround.

    Thanks again.

    Jack

  • Satellite M40X: Internal card reader does not work

    My internal card reader does not work. I think that I have not yet installed the driver, or may have other reasons, I don't know. Please show me how to find and install this driver.

    Thank you!

    Can you please check the Device Manager and tell us if any unknown device is listed there?

  • Satellite L850: Catalyst Control Center does not start

    Hello, I have an AMD 7670 m dedicated graphics card and when I install the AMD display drivers downloaded from the toshiba site, the Catalyst control does not start and he also seem to have problems with the usb ports and my wireless stops working for some reason any.

    Is that what I can do on it or am that I better use the downloaded drivers directly from AMD? Thank you

    Maybe stupid question now, but why do you need it? Have you been preinstalled OS with your laptop or you bought for laptop computer without an operating system preinstalled?

    What model do you have exactly (L850-xxx)?

  • Vista will not load and continually reboots, recovery disk does not start.

    I have a Dell with vista on it. Recently, it has automatically installed an update and now it does not load Windows at all. It goes to the screen where I have the opportunity to "start in safe mode" "safe mode with command promt", "last known good configuration" etc. and none of these work options (all start loading them upwards and then the computer restarts just itself).

    I tried to put in the cd of installation for vista, but it won't start. I changed the options in the BIOS so that it starts from the CD first, but then it just goes to another blue screen that says: there was some sort of system faliure, and the only option is to restart the computer.

    I also tried to connect an external dvd player to see if he was not playing the disc because of a defect in material, but the same thing happens.

    I also tried out the RAM and it put it back again (a single website suggested I try this).

    Nothing seems to work! And now, I am out of options and have no idea what to try next - help!

    http://support.Dell.com/

    If it does not start where install Recovery DVD from Dell, you will need to contact Dell at the above address.
    As you say, you have changed the boot on the appropriate drive order and still nothing

    It would seem that you have a deeper problem that just a straight reinstall the problem.

    See you soon. Mick Murphy - Microsoft partner

  • Satellite A500 - 1C0 - Bluetooth monitor does not start

    Hello
    I noticed that a new Bluetooth monitor was released for my Satellite A500 - 1 c 0 and so I tried to use it.

    First, I downloaded the Bluetooth stack and Bluetooth screen and install it. As soon as I restarted my computer loaded Windows system default Bluetooth service. I tried to manually start the monitor installed, so I tried a Bluetooth Monitor and it came, but nothing happened. Ultimately the only way to get the old dos application had to use system restore. When I restored it to the previous system I just installed Bluetooth Monitor without installing Bluetooth Stack, and there it is again. I only use Windows Bluetooth utility.

    How can I disable the utility and use Bluetooth Monitor from Toshiba or I can do it by default? It does not even start.

    Thank you
    Stefanos Constantinou

    Hello

    You can post information please?

    What operating system you use and that you have installed Windows recovery disk or Microsoft?

  • Satellite L650D-10J - Windows 7 does not start

    Hello

    I have a Toshiba Satellite L650D-10J, Windows 7 64 bit, 4 GB RAM and it do not start Windows 7. He begins to see you logo startup Toshiba etc and then it goes to black and it loads Bootmanager of Windows with the following message;

    + A problem on your computer has occurred during communication with a device that is connected. +

    + This error can be caused by an external storage device as a drive external USB, the device in use, or damaged hardware such as a hard drive or CD-ROM drive disconnect that is damaged. Make sure that all removable storage is properly connected, and then restart your computer. +

    + Contact the hardware manufacturer, if you still see this error. +

    + Status: 0xc00000e9 +.
    + Info: an unexpected I / O error has occurred. +
    (it has been translated by the Dutch there are some sentences that are incorrect.)

    I tried to download a Windows 7 recovery disk, it burned on DVD. It works, I'll get to choose where he was working to correct (I get an error) or use a Windows 7 from disc (does not work). And if I start it in safe mode I see that it stops and freezes to the file; Disk.sys

    Someone at - it an idea?

    Greetings,

    Hello

    And have you connected an external USB device as says the error message? If Yes, remove all USB devices and try to restart your laptop.

    If you can t start in safe mode, your operating system is confusing upward and the only option to get rid of it is to reinstall Windows.

    You use the preinstalled version of Windows 7 in Toshiba? If yes go to the start menu Windows by pressing the F8 button where you can select the safe mode, etc. and choose Advanced repair my computer option. Then select Toshiba HDD recovery and factory settings are restored. Also see this article on HARD drive recovery:
    http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

    If disk HARD recovery doesn't work, you need an original Toshiba recovery disc. If you didn t create this drive just order a new one here:
    https://backupmedia.Toshiba.EU/landing.aspx
    ?

  • Satellite S50-B-12Z - recovery does not start

    Hi guys.

    I have Toshiba Satellite S50-B-12Z
    I can't start the recovery.

    When I press the 0 key starting system, information about recovery happens.
    I answer YES to the question if I want to continue the recovery and after this system appears as normal takes just a bit longer.

    What will happen? I remember I managed to enter the recovery menu once but can't remember how.

    I taught maybe I deleted the partition by mistake, but partition magic shows he's still there (not used status).

    Any ideas why menu recovery will not come to the top?

    Hold F12 for power up to display the start menu.

    If "HDD Recovery" is not found, or its load fails, this means that the recovery partition has a problem.

    You can order on the site of Toshiba recovery disks.

  • Satellite L350-170 - recovery disk does not work

    Hello

    I have a L350-170 running Windows Vista home, I recently buy a Toshiba restore CD and now that it's happened, it does not work.

    I put in the CD and boot from the CD drive, I can hear work and the display shows "Windows loading files" and a bar appears at the bottom of the screen, after that, the screen turns white and all I'm left with is a pointer of the mouse and a black screen.

    Thank you
    Jackie

    Hello

    Have you tested if the laptop would start using another bootable Linux Live CD, WinPE or Win XP disc?
    Please check that would help determine if the problem is related to the computer laptop or recovery disk.

    Please also check if the HARD drive is ok. For this test, you can use a test called Drive Fitness Test free HARD drive tool. Google for it.

    However, it could also be a defective recovery disc and in this case, you should get in touch with the guys where you ordered this drive may be you need a replacement.

  • Satellite A30 - 203 - recovery disk does not work

    Hi all

    I have an old Satellite A30-203 and have a problem. I tried to format my laptop but the product recovery cd does not seem to work in deletion the data on my disk, its becomes blocked during loading files of ntfs? Now I am not able to retrieve a windows session would I need a new product recovery cd and would be able to get it?

    Thank you

    Hi dimation,

    It is difficult to say what is the reason of this but made is either it s a laptop problem itself or the recovery disc (e.g. scratches) causes this problem.

    In my opinion the best way to check this using a Microsoft Windows disk. If the installation completed successfully, you need a new recovery disk. As a result, you can ask a service provider authorized in your country! :)

Maybe you are looking for

  • No apps with El Capitan

    I installed a new SSD in my iMac 2007 and loaded a new download of El Capitan for a nice clean install.  I figured, I'd have access to my old default Apple apps (iMovie, etc.).  However, I realize now with a new installation, the fact that I had pre-

  • White scrambled screen and now it won't turn on or off

    I was watching a movie on Netflix and all of a sudden the screen kept jostle. I stopped it and now when I restart my laptop all the getting is a fuzzy white screen. I restarted again and now I can't always help and it is not closed, unless I have hol

  • HP Laserjet 6 L: 10 Windows driver for HP Laserjet 6 L

    I just upgraded to Windows 10 and have updated the drivers to use a HP Laserjet 6 L usng the update of Windows. I use a USB to parallel converter. The printer prints the test page, but will not print a file selected in Word. Help! All ideas

  • Buy CS2 on eBay

    So, I'll be able to purchase, install, and activate CS2 on my computer by acquiring a copy on eBay? (I think that it is a direct question).

  • I want to buy an inventory item, to use for the logo on the Web site and business cards.  Is this possible?

    I'll build a Web site.  I would like a logo that I can use on the site and printing of business cards.  Can I buy a single stock point, vector and achieve this goal?