Satellite C650 saves - Toshiba DVD creator - but does not check

I have a Toshiba Satellite C650 bought in 2010 with Windows 7. I use pre-installed "Toshiba DVD creator" to record stuff.

Recently, every time I burn a DVD (saving options: all the veryfing and close DVD), save it, but when he supposed to begin the process of veryfing, the DVD tray opens and a message is displayed ("DVD is not properly registered").

But the curious thing is that if I read that the DVD in my laptop or even another computer, the DVD seems to be burned properly, all the folders and files are read. The amount of bytes is exactly the same as in the hard drive. The only problem is that the DVD cannot be verified.

This happened at the beginning, when I got my laptop. It seems kind of a problem of "software incompatibility. I don't have a lot of programs installed in my hard drive, but the problems started after installing the Microsoft Essentials antivirus.

I tried to disable 'permanent protection' in the antivirus, and then restart the computer and burn the DVD, but the problem persists. As I said earlier, the DVD seems to be burning properly.

How to solve the problem? What happens if I download a newer version of the DVD Creator?

Thanks in advance!

Hello

I had some problems to burn the recovery discs too.
I had problems with different DVDs from different manufacturers.
Finally I could solve this problem by using the TDK DVD-R Verbatim works too, but I'll stick with TDK DVD R.

This document was published on the portal of knowledge base of Toshiba:

+ Updated Firmware ODD problems with Toshiba Recovery CD Creator +.
http://APS2.toshiba-tro.de/KB0/OPT0602W20000R01.htm

It seems that the new firmware has been released for some CD/DVD players,
You can check if your CD/DVD drive is mentioned here and maybe a firmware update could solve this problem.

Tags: Toshiba

Similar Questions

  • P50-A-144 satellite: the CD-ROM/DVD-ROM drive does not

    Version of Windows 10 Home 1607 (Build 14393.187)

    Hello

    After Windows Update Version 1511 1607, the CD-ROM/DVD-ROM drive does not work.
    The D: drive does not appear in Windows Explorer,
    CD-Audios and videos / DVDs do not work.

    In the Device Manager, the following legacy status error message appear:
    "Windows cannot start this hardware device because its configuration information.
    (in the registry) is incomplete or damaged. (Code 19). »

    Could you tell me how to solve this problem?
    Thank you.

    The solution was to uninstall the program "Toshiba Recovery Media Creator' and system settings/Programm features.
    I still don't understand why, but the fact is that after uninstalling the CD-ROM/DVD-ROM start normal work.

    More information here:
    http://www.borncity.com/blog/2007/08...-verschwunden/

  • Satellite P850-12Z - Toshiba DVD/BD drive is not compatible?

    My disc drive won't read disks. I get an error message saying your ot Toshiba dvd/blue-ray player version is not compatible with this version of windows which is 8.1.

    How can I fix it?

    Your laptop model was offered with Win7. Have you installed the version of clean and later put Win8 to level to Win8.1?
    What version you used in the past?
    Have you installed player version available on the Toshiba download page?

  • Satellite L750 - WLAN Driver seems installed BUT does not actually

    I formatted my laptop 'Satellite L750"which, like"Realtek RTL8188CE' wireless network. After the download and installation of the network adapter driver for Windows 7 x 64 Toshiba site wireless, everything looks fine on the screen of the installation and after installation. Driver status says 'this device is working properly' and appers wireless icon in the status bar as expected.

    BUT wireless serach finds no access point. When I look at ' ipconfig/all' into the command screen this adapter is not seen in the list?

    I turned on and off the map of the software several times. I disabled and enabled driver several times. I tried to download the driver of this same card 'Realtek' Web site but nothing has changed?

    What is the problem that I can't understand. Before the format it worked well in the same operating system windows7?

    You can enable or disable WLAN using FN + F8 key combination?

  • Windows 7 screen saver works in Panel, but does not start

    A graphics card freezing issues so I replaced the card and installed the drivers updated.  However, screensaver windows 7 won't launch itself.  It works very well in the Panel, including the example.  But when the time comes to launch due to inactivity of the system the screen goes black and the monitor goes to sleep.  Several times, the monitor hangs to this state of sleep and I have to restart the computer.

    It is a clone of pc with a Biostar G41D3G, socket 775, the Intel Core 2 Duo 4 GB memory, 500 gb hdd, MSI Radeon 1 GB graphics card in the pci-e slot.  Operating system is Windows 7-64 bit.

    E-mail address is removed from the privacy *.

    Hello

    It happens with all screensavers?

    Method 1:

    See the following site:

    A screen saver that displays the images stops working in Windows

    http://support.microsoft.com/kb/2425702.

    Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://windows.microsoft.com/en-US/windows7/Back-up-the-registry.

    Method 2: Save a new user account

    See the following site:

    Create a user account

    http://windows.microsoft.com/en-IN/windows7/Create-a-user-account.

  • Matshita DVD-RAM UJ880AS does not

    Matshita DVD-RAM UJ880AS works not properly, will read the DVD etc, but does not burn. Ran Microsoft solve this problem, has not solved the problem.

    Hi Hopkins3329,

    I dare say that the drive had a lot of work on the burning aspect of it, and laser could have in that there is a laser to read and burn...

    Concerning

    GT4U

  • I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

    I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

    Hello

    I suggest to refer to this link, scroll down to error code 41 and follow the steps and check if that helps:

    http://support.Microsoft.com/kb/310123

    It will be useful.

  • Satellite A200: DVD/CD player does not work

    Excuse me
    I bought toshiba A200.
    After two weeks my DVD/CD drive does not work.
    So I deleted the a±ts driver and then I do not want to install the driver.
    Please help about this.

    Hello

    Don't be angry with me, but your ad is not a little clearer!

    However, the CD/DVD drive uses and supports the common drivers Windows Vista (or XP)!
    You n t need any special drivers to recognize the STRANGE

    In your case I would recommend going to the Device Manager and remove (uninstall) the CD/DVD drive.
    After this procedure, restart the laptop.
    The Vista operating system should recognize the new device and must be reinstalled the drivers automatically

  • DVD - RAM drive does not appear in my computer (Satellite M30)

    Hello
    I have a rug * a DVD-RAM UJ 820 in a Satellite M30
    It seems that the driver does not work and the DVD unit is not showing in my computer - the device however seems to work - I was told a solution may be to download the driver and re-install again. Any idea where I can get that? You have any other suggestions on how to fix this?

    Thank you

    Hello

    drivers are located on the download site for the driver from Toshiba:
    https://EU.computers.Toshiba-Europe.com
    under Support & downloads, download drivers

    If this does not help, look around this forum. I saw some other threads on this DVD player.

    Good bye

  • With audio slideshow created in PSE 9 plays well in edit.  When brought to burn items from the Prime Minister for the dvd, the audio does not play.  He appears in the edition, but no sound is played.  It happens regularly.  What setting could be wrong?

    With audio slideshow created in PSE 9 plays well in edit.  When brought to burn items from the Prime Minister for the dvd, the audio does not play.  He appears in the edition, but no sound is played.  It happens regularly.  What setting could be wrong?

    Thank you very much!   At your suggestion, I've selected out, burn to disc, DVD.  A window shows requiring Save have *.wmv.  OK, reluctantly saves.  Automatically opens first.  Preview has no audio.

    Instead of burning to disc, I chose Edit in first.  The preview has the video and audio.  Engraving option asked under wmv.  BUT by selecting the tab burn, then disc, dvd, part took place smoothly and dvd resulting contains actually the audio and the video.  Yes!

    She should not be incompatible and hard, but I could never have succeeded without help.

    Thanks again.

  • Satellite Pro L300: DVD drive eject does not & recognizes not all disks

    Satellite Pro L300 dvd player eject does not and does not recognize the disc that sits in.

    Please help someone,

    Thank you very much.

    What kind of help do you expect?

    You mean he s a software problem?

    I doubt it because it sounds like a mechanical hardware problem and in this case, the disk must be replaced.

    The laptop seems to be is not very old, and I think that the guarantee must be valid
    How about you, communicating with ASP in your country and ask for a replacement WEIRD?

    I think this helps

  • Satellite A60 DVD - RW drive does not

    Hi guys,.
    The DVD - RW drive does not read anything I put in it.
    He works certainly (in some form) because it runs on start and when I put a disc inside, but he can't always SEE.

    I tried to uninstall/reinstall the drive itself, uninstalling/reinstalling the driver. I searched on the net for drivers (thinking that the driver file was corrupted), but I couldn't find a driver for the DVD-RAM.

    I was restarted after each task but still no luck.

    Help, please

    Thank you
    Dave

    Looks like a dead drive. I think it should replace the disk.
    Try to contact the ASP in your country, and it will get you more details.

  • Windows XP - LG DVD - RAM drive does not read the DVD. It's playback CD only... I ran the fix microsoft program... but it did not help at all.

    Windows XP - LG DVD - RAM drive does not read the DVD. It's playback CD only... I ran the fix microsoft program... but it did not help at all.

    CD/DVD players use different lasers to read CD DVD vs.  Eventually, your DVD laser has grilled.  It might be time to replace your CD/DVD drive.

    HTH,

    JW

  • drive CD shows autoplay, autoplay shows cd drive, but does not open automatically when the cd or dvd is inserted

    drive CD shows autoplay, but does not open automatically when the cd or dvd is inserted

    original title: Watch autoplay cd player

    OK, got cha.
    Try this:

    http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings
    b Eddie

  • CD/DVD drive reads but does not write.

    I run XP multimedia.

    When the optical drive no longer works, I ran malware controls, then Mats_Run.dvd.exe.

    "I had to choose and choose fix' reading discs ' which it did.

    "" Write function did not work so I ran /Mats_Run.dvd.exe again with the ' writing difficulty ' option.

    Still, it reads but does not write.

    I installed an external burner and repeated the above; same result.

    When I boot with Vista, the two burners work perfectly.

    Details of virus removal
    Provided by: Malke - MS MVP:
    http://www.elephantboycomputers.com/page2.html#Removing_Malware

    Also:
    Unexplained computer behavior may be caused by deceptive software
    http://support.Microsoft.com/kb/827315

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

Maybe you are looking for