Satellite C650 stops when I close the lid

I recently got my laptop for Christmas, and a few weeks ago, I noticed that whenever I opened the cover, I had to turn it back on. He woul say the computer stops unexpectedly. Then you choose the security mode or regular. You hit one and we would send you to the Start Up repair.

What should I do to get that normal back where I can close the lid and then open it again without having to reboot and wait more than seven minutes to start repair.
Also, I got the blue screen.

Do I have a virus, or is there another way I could fix it?

Stand by. In the history I n t understand one thing: in power options on the side left (blue color), you can find the option choose closing the cover. Which option is implemented here?

What should your laptop when you close the lid?

Tags: Toshiba

Similar Questions

  • Satellite 1800-314: when I close the lid it won't go in standby mode

    I hope someone can help.
    I recently had my Satellite 1800-314 (Windows XP) re-formatted and now when I close the lid he's going to sleep... the power light flashes orange, when I opened the lid still once, Windows stops and then restarts. I tried to install the Toshiba power settings, defining "when I close the lid, in standby mode", does not.

    Have uninstalled then Toshiba power settings and all the settings of ordinary power in the Panel of 'sleep', etc., but it REST did not return to standby mode.
    I'm tired now.
    Is there a simple solution that I'm missing?

    Grateful in advance for any help!

    Hello

    You know it's very important to install drivers in the correct order.
    The installation of common modules at the beginning is important because some drivers of Tosh need this application to work properly.
    If the energy saver has been installed on the operating system windows power settings will not work.
    Toshiba crash parameters the parameters of Microsoft.

    In addition, please check your BIOS preinstalled. Compare the version with the BIOS on the page. If your uses of the unit the old version, so try to update.
    But be careful. You must use the good BIOS and the right procedure upgrades.

  • My Satellite L40 Hibernate when I close the lid

    I have a L40 with XP SP2, and the 'power Management' advance got, I clicked Hibernate when coses cover. But it's simple ignore and do not hibernate. How I fix this problem.

    Thank you

    Have you updated BIOS to have the taken WXP version supported?

  • Satellite A200 AH3 stops instead of standby when I close the lid

    Hello

    I have a laptop Satellite A200 AH3. When I bought Windows Vista was preinstalled (I still drive recovery). When I closed the lid of the previous day (I mean the monitor turn off the HD, the cooling fan and all the rest). The light On / Off on the laptop turned to a flashing orange light.

    Then I opened the lid and Windows prompted me to the logon screen. This process occurred when the laptop starts on the battery, not when it is plugged. Everything was going fine.

    But I formatted the HD to install WIndows XP that I bought Windows vista seem to be too heavy for my laptop. So I installed Windows XP and the driver and the software available on the Toshiba site. Now when I close the lid, the Windows shut down very quickly (about5-6 seconds). However, it is a real firm. When I reopen it cover anything happen.

    Then I press the power button / stop and start Windows, normally (no screen saying that windows close annormally and no Safe Mode boot option). Even if I change the setting in the control panel/power Option or the Toshiba Power Saver, utility and I put them to sleep, he always make a stop down.

    How do I restore that?

    Hello!

    Have you downloaded the BIOS for Windows XP?
    For the Satellite A200, there are two versions available; one for XP and one for Vista.

    Also, make sure that you have the latest graphics card driver and keep your XP to date.

    Good bye

  • When a close the lid of my portable computer Windows Media Player stops, and when I open it, it picks up.

    When a close the lid of my computer laptop wmp stops and when I open it, it resumes. This only happens on the battery. I have it set to not sleep, and there is no screen saver. I want to use my cell phone as an mp3 player without having to leave the lid open. is there anyway to prevent a break?

    original title: WMP stops when the lid is closed

    Open Power Options - you can do it from the control panel by typing Power Options in the start menu, or by right click on the battery icon in your system tray (right end of the taskbar.)
    Click on "change plan settings" for your current power management.  On the next page, click "Change advanced power settings".  On the box that opens, expand 'Power buttons and lid', then 'action close cover.'  Change the selection to "on battery" to the 'status quo', and then click OK.  Close the power Plan window.

    HTH,
    Chris

    MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • Hi I have a three month old g6 Pavilion and sometimes when I close the lid of the machine stops.

    When I close the lid on my g6 he died. When I restart it I get the message Windows does not stop correctly.

    I put the instruction for the lid to do nothing on the fence. This anomaly is intermittent.

    G6 laptop computer A5H00EA #ABU

    Windows 7

    64 bit

    I hope someone can help

    Hello

    Like this sound like a hardware problem, you should contact HP and arrange for the laptop repaired while you are still under warranty.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    Kind regards

    DP - K

  • External screen goes blank when I close the lid Satellite P100

    Hi all.
    I hope someone has an idea as to what is happening here.

    Sometimes I like to watch a dvd or use the center of the media on my HD TV. I use Windows Vista to make it.

    When I had XP installed, I close the lid of the laptop and watch them to my heart's content. Now with Vista, I need to have the lid open be able to watch on the external display. If I close to you then the external screen is empty, as if I unplugged the laptop.

    That makes me free! What worries me is burn-in screen, because the standby screen not turn on as I am watching video.

    Help! Someone! Anyone!

    AFAIK in Vista that you can use the same options as under WXp. check please supply option and you will find an option called when I close the lid. As option, choose no action.

    I think you should be able to close the lid while watching the movie on screen.

  • When I close the lid on my MBP, it goes to "Standby" to "Hibernate" why?

    My MacBook Pro for six years had been working perfectly until about a month earlier, when he stopped to stay in Mode standby when I closed the lid.

    With the lid closed, initially, he goes to sleep, but after about 30 seconds, it goes into hibernation mode and to turn on again, I have to press the power button. I then get a grey screen and no use of the trackpad. Shortly after, the gray screen disappears and the machine works perfectly.

    The battery life is very good (68%), I have reset the SMC and I have not loaded the new software. The only thing I can think is that this started to occur at the time of the last update of Safari.

    Does anyone else have this problem?  Comments or suggestions are appreciated.  Thank you.

    Hello, Spring Lake Bob!

    Thank you for using communities Support from Apple. After reviewing your post, I understand that your MacBook Pro sleeps as expected when you close the lid. Instead, it goes into a hibernation mode that requires you to press the power button to interact with him again. I certainly understand wanting to make sure that the computer sleeps when it should wake up how it should. I'd be happy to help you!

    Get help with your situation, I would say using the article below the link to help isolate and solve the problem of sleep.

    If your Mac does not sleep or wake up when expected

    See you soon!

  • Laptop shuts off and turns on when I close the lid

    Hi, I just bought a HP Pavilion 15-n253sv and I noticed that when I close the lid its turns off instead of getting in standby mode. Also when I stopped it, and then I close the lid it lights up. Its like the on off button. Is it a hardware problem that I must return the laptop? I checked out the settings and it is said that when the lid is closed it just goes to the standby mode. I have win 8.1.

    Hi Biliou,

    Welcome to the Forums of HP Support!

    If I understand you correctly, your computer shuts down when you close the lid, and if it is turned off and you close the lid it lights.  I think you are right to think it's a hardware problem. You can contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the link to get help from your region number. Contact HP worldwide

    I hope that this helps, please let me know how it goes.

    Thank you and have a great day!

  • Computer stops whenever I close the lid

    I have a 5510 accuracy is around the age of 2 months with 10 Windows installed on it.  In 2-3 weeks he started close subject when I close the lid.  Of course, I never close the lid and save open it immediately, it's usually hours later or the next day.

    My settings specify that when I close the lid it falls asleep on the two battery and plugged in, but now it's apparently close because when I re - open the cover later it's start.

    I saw another post that mentions trying several things like updating video drivers or do some diagnostics on the hard drive.  What should I check first?

    Hi KLIEMOHN,

    This happens with or without the adapter plugged? Is there the bluescreens / system breaks down? The pilot light and manual standby modes work fine? The system into hibernation and turn very well?

    Update the BIOS - http://dell.to/1U2Js3b

    Create a system restore point.

    Reinstall the chipset and video drivers from the same site above.

    Go to control panel-> options-> to modify the parameters of plan-> change advanced power-> sub sleep settings - disable hybrid sleep - under the power buttons and lid-> check lid close action settings - apply and ok

    Restart the system and check that it works very well.

    Create a new account admin and check - http://bit.ly/1JoFhcw

    If the problem is not resolved, restart the system and press f2 to enter the BIOS - close the lid and open again and check if the system stops, and it stays on in BIOS mode.

    Restart button f12 system and press on start - choose the diagnosis. Let run diagnostic tests and if you encounter errors - take note of the full error even report for us.

    If the system is under warranty, write me a private conversation with the service tag, your name and e-mail address.

    Keep us updated.

  • Empty desktop computers are created when I close the lid

    Hi guys,.

    I'm using version: 10.11.2 (15 c 50) of El Capitan. Most of the time when I close the lid of my MacBook and open later, I notice that desktop empty 10 - 15 have been created while I was not using it. I have no idea why this is happening, but one thing is certain: it has happened after the update to El Capitan.

    Is this a known issue? You have any ideas what could help?

    Thank you

    MacBook Bro

    Try to download and reinstall the os x on top of what you have.  He should leave intact user files.

    Of course, it is always good to have a redundant backup plan in place.

  • Windows 8 do not sleep when I close the lid

    I just got the Elitebook 850 G1 and I put all the parameters of sleep when I close the lid and wake up when I open it. I checked the two settings in windows and in the BIOS and it's all good, but when I do actually, he does not wake up but restarts the computer instead. So when I was away typing on Word, fortunately I constantly save it but it's not back to where I left off. I thought it was one of the graphic drivers first, because he has dual graphics, intel and ati. He had a few problems with the ATI card, but I think that I fixed it. I am running windows 8.1 Pro.

    What can I do else?

    Edit:

    I tried changing the settings to hibernate instead, and what he gave me was a BSOD.  Video_dxgkrnl_fatal_error. I remember that what made the first time I tried to do it before when he was on the way 'sleep'. any suggestions?

    is not serious, I fixed it. It turns out that the new graphics driver intel was the culprit. I had to revert to a previous version. works perfectly now

  • I get email when I close the lid of my new inspiron

    When I close the lid of my new laptop Inspiron I don't get the emails.  I also do not receive if the lid is open and I have not used the computer for a while. Can you still get emails on outlook while your computer is in mode 'sleep'?

    You will receive e-mail messages, regardless of the mode 'sleep', etc...

    I've never had mail downloaded from the server until I "wake up" my computer. Never have.

  • Takes too long to Hibernate when I close the lid - also the noise of random device when starting

    Hello guys.

    Since I wiped the machine, I had these two problems. When I close the lid, he used to go to bed right now, but now I see the light of sleep (and the power button), flash and flash, and then he goes to sleep.

    Upon awakening, he crosses the start of lenovo screen and resumption of the windows, then it asks for a password, before I used to open the lid and he was asking me the password immediately. I know it was going to sleep because I could hear the beep immediately when I closed and opened, but now it takes just too long.

    In addition, every time I have boot into windows or resume in a sleep state windows, I hear the sound of the device, like something being connected input/output. But there's nothing being plugged or back at the time. I can't to Device Manager fast enough to see who it is who is the cause.

    But all the drivers seem to be correct.

    Thanks in advance.

    Sam.

    EDIT: Also noticed, when the lid is closed, randomly the laptop turns off (beep) one then turns left.

    Weird.

    T420 model number: 4180-PR1 with operating system: Windows 7 Pro 64-bit

    Completely wiped the machine and reinstalled everything. No Acronis this time and work all fine.

  • Monitor not turns off when I close the lid!

    I have a compaq evo n1015v running windows xp pro, and when I close the lid the monitor stays on! How can I do to the monitor turns off when I close the lid?

    I have a compaq evo n1015v running windows xp pro, and when I close the lid the monitor stays on! How can I do to the monitor turns off when I close the lid?

    This is probably controlled by the power settings. Once you enter the power settings there should be an option something similar to 'change the closure of the hood '. There are probably several options such as sleeping, ect...

    You can download the manual in PDF HERE.

Maybe you are looking for

  • Satellite A100-383 does not start - not battery

    Hello. I have an old Toshiba Satellite A100 - 383.Recent months its battery will remain as defendant for 20-25 minutes. OK, that's an old laptop, it's normal, I thought... I connected the laptop to the grid and I haven´t you have any problem. I staye

  • Configurable custom control of reference for NI VeriStand

    I'm working on an application of VeriStand where I'm modeling more than 100 pieces of similar material, each demanding a set of controls and indicators on the VeriStand workspace. Because I have a few hundreds of orders and total indicators to config

  • VeriStand tutorial Installation: 'no software will be installed.

    I try to install the NI Veristand tutorial.  I downloaded and extracted the file generated at my office.  When I run the installer, it says "no software will be installed" the second or third screen. There are a few other forum discussions on this to

  • E4200 Mac connects but not PC after crash

    We had a power failure.  Connection Wi - Fi disturbed and has not corrected itself as in the past. A MAC and android os phone will connect but not PC with different operating systems. Wired computers will connect and go on the internet but not when t

  • xwizards.dll missing in an attempt to connect to wireless internet

    My family and I recently moved, and our wireless setup initially worked well, using our existing router.  A power failure has occurred and we were unable to connect to the interest in using the wireless router.  I installed a new router with 3 of our