Satellite C650 - unable to connect to message

Similar Questions

• Satellite C650-17Z - only PXE error message no boot device

  Hi people I was wondering if anyone of you kind people out there could help me. I have a Satellite C650-17Z model and when turn on is the message I get:

  + Intel UNDI, PXE - 2.0 (builkd 083) +.
  + Copyright (C) 1977-2000: Intel Corporation.

  + For Atheros PCIE Ethernet Controller v2.0.1.9(12/15/09) +.

  + Check the cable connection! +
  + PXE - MOF: exit Intel PXE ROM. +.
  + No boot device - insert boot disk and press any key.

  Can anyone any sense of the message above?

  Hey Buddy,

  This error message means that an incorrect boot order is set and the computer tries to start between LAN port to the internal HARD disk space. It should therefore go into BIOS setup and change the boot order. Put the HARD drive as the first boot device internal.

  Take a look at this article from Toshiba:
  [PXE error message appears during the clean boot procedure | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=8]

• Satellite L650 - unable to connect to the public network (has no valid IP address)

  Hello

  Toshiba satellite L650 laptop computer (with windows 7 64-bit), I bought two days back and I'm unable to connect to the public network. Sometimes, it must be connected to the public network and after a few minutes it disconnects. I get the message "wireless network doesn't have a valid IP configuration him."

  I have visited many forums and did everything, but of no use.

  1. people with disabilities the tcp/ip V6 of the registry.
  2. the DHCP is enabled. With the help of the automatic IP (DHCP)
  3. also tried with a static IP configuration.
  4. uninstalled the antivirus provided with laptop computer (Norton).
  5 disabled the windows firewall.
  6. restored to factory settings.

  I called Toshiba Tech support as well and they have suggested that it may be a problem of H/W but I don't think that so that it can be hardware problem because sometimes he must be connected to the public network. Now I'm left with no option except return the laptop to Toshiba (I'm less interested in this because I know that sending laptop for replacement will be more frustrating).

  Can someone please give some other suggestions for this problem?

  Hey,.

  Can you connect to your home WIFI router correctly?

  If you have problems with the public network connection, you should ask the owner of these networks. Usually, there is always a contact, you can ask if you have any problems with the connection.

  What you can try is updated WLAN driver from Toshiba's official website:
  http://APS2.toshiba-tro.de/WLAN/

  If it doesn't work, ask the person contact I mentioned.

• Satellite C650 to TV connection

  Hello

  I have laptop Satellite C650 and I'm trying to connect my laptop to my TV, I am using a VGA-HDMI cable but have had no success. I went through the * control panel / appearance and personalization / connect to a screen external display * options, but I can't seem to find the TV anywhere.

  I have only one option of * mobile PC display * and cant seem to change since the * generic PnP monitor * choice.
  I can get to the graphical control panel intel tells me that this monitor and tv settings are not taken care of, this means that it is not possible to connect to a TV with this particular laptop or I can download a driver that would perhaps allow me to do?

  In General, each laptop with video output port can be connected to the TV. All you need to do is to use a video cable, and remember, it can be connected to your TV.
  If your laptop doesn't have HDMI but VGA port and your TV has PC (RGB/VGA) port that the use of this cable. Using your VGA to HDMI, I assume that your computer laptop doesn't recognize TV at all. It is sometimes problematic with these cables.

  Has your TV as PC port?

• Re: Satellite L300D - unable to connect via WiFi network

  Any help please? -I just L300D with Vista professional.
  Crossed troubleshooting but still unable to connect via the wireless network - no probs with other laptops.

  When going through "Toshiba assist" message arrives "this wireless network device is disabled.

  Please activate the device"- button wireless is activated with light yellow?

  any ideas?

  Are you sure that the laptop wireless switch is on?
  Look in the Device Manager. Maybe it's the wireless network card disabled. So activate it.

  Also try an update of the WLAN driver. You can find it on the Toshiba site:
  http://forums.computers.Toshiba-Europe.com

• Satellite L350 - unable to connect via a WLAN

  Hello
  New to this lark of thread

  You just bought a L350
  I have managed to connect to the Internet via a cable, but am unable to connect via wifi.
  WiFi is turned on. He finds my BT Home Hub but when I connect, it just says: it's impossible.

  Help, please

  Have you checked the Wifi device in Device Manager? The driver is properly installed?

  Try turning off your firewall, which could block the Wifi connection.

  Also try to press Fn + F9 to toggle wireless devices

• Unable to connect, a message: Incorrect password

  Original title: problem password help! : ()

  I'm trying to log into my account, but it says wrong password... it's the same password I've always used how can I fix? Does this affect that I just moved my computer from its location?

  Hello

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  And this is the Information from Microsoft on the problems of passwords;

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  http://support.Microsoft.com/kb/189126/en-us

  Tools third password

  Some third-party companies claim to be able to bypass the password that have been applied to files and features that use Microsoft programs. For legal reasons, we cannot recommend or endorse any of these companies. If you want to help to break or reset a password, you can locate and contact a third party company for this help. You use these third-party products and services at your own risk.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  Malware can also cause problems with passwords:

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• Satellite A300 - unable to connect to my router

  Hi all

  I have a Satellite A300 and a Satellite A300D. Since a year im dealing with a problem and eat my heart. I have problems to connect to my router, for the moment I have a Netgear ADSL modem router wireless. When I am looking for a wireless network it seems to find the network, but when I want to connect I get the message network is no longer in the area.

  The distance between my modem and laptops are 3 meters in an apartment, even when im sitting on my router :-) this is not not possible to connect to the wlan. Tried to connect without any wep/wpa encryption, no effect. Played with communication channels @ the properties of the wireless network adapter and the router, but this isn't a solution.

  Before I got the Netgear, I had a Linksys / Sweex / Cisco pro / router Wlan from HP. I tried all brands of wlan, with all routers routers of this I had the same problem.

  Frustrating him of is that I can connect to my neighbors without any problem, but not my own network.

  Anyone having the same problem or know a solution?

  Have you tried to update the WLAN driver on two laptops? You can find it on the Toshiba site and I would update the BIOS too:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  What operating system do you use? If you use Vista, you must disable the WLAN to save energy card. You can do it in Vista Power Options.

  You use the same standard WiFi on your laptop as on the router? For example I mean project. G check this!

  At the moment it is not easy to say what is the reason for this, but I hope that I could help you a little. :)

• Satellite L20: Unable to connect to the internet using mobilephone & dongle BT Mecer

  Hi all

  Mine is an edition of Satellite L20.
  I recently installed XP Professional Service Pack 3. I connect to internet using my USB cable with my Sony Ericsson C702 (use the phone as a modem).

  Since there is no bluetooth built into my laptop.
  So, I bought a Mecer bluetooth dongle. I installed the bluetooth software. Can I transfer data between my laptop and my mobile phone via bluetooth.

  Now the problem is I can not connect to the internet via bluetooth. I opened my bluetooth IVT software and paired my laptop and mobile computer. Then I opened my Sony ericsson suit and looked for my mobile finds, my mobile and still once he pairs with my cell phone and when he tries to connect with my mobile phone its shows "device cannot be detected, try again." I tried to reconnect, not matching and pairing it several times, but no use.

  I also found one thing, just after it displays "Device cannot be detected," a pop-up message "SEPCSuite.exe has encountered a problem and closes the window with options."
  1) send to microsoft
  Including 2) send.

  What can we do to fix this problem?

  No idea...?

  See the website of your provider of Bluetooth software to help. This forum is for Toshiba Software only.

• Satellite L510 - unable to connect to the mobile phone

  Hi, I have a question and hope to get a solution for everyone! I use Satellite L510 run with Windows vista but the problem is that I can't connect my bluetooth with nokia 5230!

  It can connect to the nokia 7610 and 7610 connect to 5230 also no problem. So I'm just wondering why the laptop can not pair with my 5230! Thank you!

  What error message do you have? What is the last message on the side of the phone before the error occurred?

• Re: Satellite L770 - unable to connect to the WiFi N project

  I can connect when I set my router "mixed b/g/n" but only 54 Mbps but if I change the router 'one n' while I can find the network but cannot connect. My most old laptop, Satellite L500D can connect mode "n" without any problem. These are the only devices connected wirelessly and the problem persists if old pc is turned off. In the interface of the routers, I see my connection has / g, older Satellite mode shows n mode as it should.

  Drivers are updated, router D - link DIR - 615 with the latest firmware.

  Hi JP75,.

  What exactly happens if you try to connect to the router N project? You get an error message or what happens?

  It is not easy to say why the works of N doesn't correctly project but first of all, I would try a driver WLAN official Portal of Toshiba:
  http://APS2.toshiba-tro.de/WLAN/

  Is it in eco mode / normal too?

• Unable to connect to messages

  OS X Version El Capitan 10.11.6 brand new computer, bought a week ago

  iMessages was working fine and then suddenly wasn't.  I can't connect at all - just said that authentication has failed.  My apple ID is very well - can connect to it on iCloud.  Tried to do a Reset of the PRAM twice and a secure boot.

  Was on the phone with Apple for an hour, in which the person, said it was not good for com.apple.Messages to be empty when we shared the screen.  Me given to a senior who has completed the call, I tried to reinstall a new operating system on my computer, which also did not work for some reason any.  I prefer not to go to an apple store as there is no less than an hour from me.  I have no idea why iMessages does not work for me, and the people on the phone I talked were little or no assistance.  I would be grateful for any real advice, as have never even posted on a forum, but I don't know what else to do.

  Hello

  There may be several causes and the reasons for it.

  Resetting the NVRAM (PRAM) is a good start.

  Secure boot is also good.

  Can we go to the Apple icon on the top Menu on the left and use the words this Mac option.

  In the tab 'Panorama', the serial number must be considered.

  It is used in an iMessages server-specific connection device (with the Apple ID and password)

  It shows?

  If it is go to Applications/Utilities and open Keychain Access.

  Select top "Login" on the left if it isn't already.

  Select "Password" at the bottom left.

  On the right side look for

  ID: YourAppleID- Auth Token

  The 'YourAppleID' should be used email as Apple ID in iMessages.

  Delete this, but let the Keychain Access open.

  Restart the Messages and try to connect again.

  The ID element is recreated?

  If not then open a Finder window and use the Menu to go, while holding down the ALT key.

  Select the library and go to preferences.

  Find both of these:-

  com Apple.IMessage.Bag.plist holds that the last iMessages server is connected to.

  com.Apple.IDS.service.com.Apple.Madrid.plist contains the Apple ID and alternatives listed in the application.

  Restart Messages (both are re-created if it works).

  It work?

  It is as much as you can test/do with your own Mac and the Apple ID user account

  If you have access to another identifier Apple try that.

  Does it work?

  In system preferences > users and groups, you can enable comments represent or specially create a Mac user account to test.

  Connect to this account

  Set up the iMessages with your normal Apple ID

  IMessages correctly takes into account Login?

  If so, we will have to look more at your Mac user account.

  If it is not, it is unlikely that Apple ID it is blocked at the level of the iMessages Server (this is a security feature that is supposed to prevent people from impersonating you - based on specific device connection - but for some, it fires when it shouldn't, but there is no adjustment on the Mac end.

  Come back to this stadium, as well as the details for the "Fix" winded newspaper and this bouquet is long enough already.

  

  21:42 Thursday; September 1, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• Satellite C650 - how to connect to HD TV

  Hello

  I was wondering if it was ok to connect the C650 laptop to HDTV using an AVG for an HDMI cable.

  It work?

  concerning

  Hello

  First of all this laptop does not support HDMI or DVI port.
  It seems to be equipped with an output port that can be used to connect an external video monitor VGA.

  Now everything depends on your LCD TV.
  I don't know which ports are supported by your TV but you should look for a cable or an adapter that would connect laptop VGA (RGB port) s and the video in port on your TV.

  But it of not possible to connect the VGA to HDMI. But maybe you can connect VGA/DVI (DVI would be supported by TV)

• Satellite L670 - unable to connect to the Bluetooth

  Hello

  I am trying to connect to the bluetooth on my Satellite L670. The driver is downloaded but it not to finalize the installation. He's always asking to connect to the laptop computer, a bluetooth device.
  This laptop have bluetooth? If this isn't the case, I can use a USB bluetooth (all?) to connect a bluetooth device.

  Thank you for your support

  Hello

  > This laptop have bluetooth?
  What model of L670 you have exactly?

  You can check the specifications of the laptop on the official page of Toshiba.

• Satellite L850 - unable to connect to certain websites msn/microsoft/ebay etc

  Hello

  I have a new laptop Toshiba Satellite L850 which is set up to my belkin wireless router.
  I can connect to Web sites such as tesco/asda/facebook etc etc but for some reason cant get on the likes of msn/microsoft/ebay etc.

  Any ideas what the problem might be or how to fix?

  Im not very good with computers please respond in terms of base if possible

  Thank you very much

  Have you tested this using different internet browsers like Firefox, IE, Opera, or Chrome?