Satellite C650 won't start - status: 0xc00000e9

Laptop suddenly froze while I was on the internet.
The mouse was still usable, but I could do nothing else — or even stop or restart.

So I forced stop and tried to turn it back on, now it started, however, first of all, a screen will appear indicating "readers", and then I was faced with a screen with a list of writing on this subject.

He said that I should contact the hardware manufacturer and known as the 'status' 0xc00000e9 and "info" as "an unexpected i/o error has occurred", I'm unable to boot up the laptop and have gone through the troubleshooting list.

_ * HELP! * _

Hey Buddy,

You can start Windows in safe mode? Before you press F8 key to enter the start menu Windows Advanced to start Windows, and then select Safe mode. If you can start the computer, it seems to be just a driver issue.

And before contacting an authorized service provider that I would try to reinstall Windows from Toshiba recovery disc. If you can test it with factory again.

Tags: Toshiba

Similar Questions

  • Satellite C650 does not start with android phone on

    Hello

    I have a smallproblem. My Satellite C650 does not start when my android phone is plugged into the USB port. It sticks to the Toshiba start screen. I checked the boot order and the hard drive is the first on the list, so it isn't that. Any advice will be welcome.

    Thank you very much
    Ian

    Cool. Thanks for the comments.

  • Satellite L500D won't start

    Hello

    My Toshiba Satellite L500D won't start.

    When I start my laptop lights three on the light green left, the two on the left are not green or red. I hear the coolingfan, no beeps at startup. When I start the laptop with a systemdisk is the same, nothing happens.

    I have contact the supportdesk and they said it could be the hard drive, this seems a little strange for me because I can't begin with a systemdisk.

    I hope someone can point me in the right direction

    Buddy

    Hello

    Unfortunately on this virtual path, it is not easy to say with certainty what can be the problem.
    It will be interesting to know what you did with your computer laptop last days.
    Have you installed some day or anything that may be responsible for the issue described?

    Update the BIOS maybe?

  • Satellite C650 won't turn on / boot (black screen only)

    I am having trouble with my year old Satellite C650. In fact, when I go to turn it on it just won't. The power led on the front of the laptop turns on and the fan starts whirring (only to stop a few seconds later), but there is no change to the screen. I tried to take out the battery, restart, connect, disconnect - basically everything I can think of, but nothing made a difference.

    Can anyone think a possible solution? I really hope this isn't a hardware problem, but I have a horrible feeling that it looks like this...

    Thank you!

    Post edited by: EllieRose: this isn't a C650, 660. Should wear my glasses...

    > Can anyone think a possible solution? I really hope this isn't a hardware problem, but I have a horrible feeling that it looks like this...

    I'm scared of m its hardware problem.
    My advice would not apply to a Toshiba service provider in your country that would check the parts.
    Your laptop doesn't seem to be old so maybe the warranty is still valid and the fix could be done free of charge.

  • Satellite C650-1CN - no start and secure Windows 7

    Here's the problem:
    Satellite C650-1CN, after exactly 30 days Windows 7 blocked, and now push the power botton, the pc entirely, then start?

    Hello hans,.

    Wait a minute: what's the problem now?

    Can you start your computer and access the Windows?
    Or the computer does not start and you have a black screen only?

  • Satellite C650 does not start - error PXE - M0F

    Just bought a Satellite C650, get it home and my son decided to stop the whole upward as he ran.

    Now, we get the error below:

    Check the connection of the cable!
    PXE - M0F: Exit Intel PXE ROM
    No boot device - insert boot disk and press any key.

    We received no drives, nor a manual with adequate instructions and can't find anything on the web for help.
    Toshiba closes for the day.

    Hoping that this forum could give me an idea.

    Hello

    PXE error is displayed because the laptop has attempted to boot from LAN.
    Why it does not start from the HARD drive but LAN switches?
    I think the HARD drive is defect.
    Perhaps its also not recognized in BIOS.

    Switch on and press F2. This allows you to access the BIOS where you could check if the HARD drive is recognized. I guess it must be mentioned on the first page.
    If it s not there, then it means that the HARD drive is dead and must be replaced.

    I assume that the warranty is still valid; Therefore, you should get in touch with Toshiba ASP in your country for replacement.

  • New Satellite P300 won't start.

    I hope you can give me some advice. This week, I bought a new Toshiba P300 GU with Vista Home Premium. It worked fine for about 3 days, but now it won't start at all.

    Symptoms:

    * - Some LED lights blink for a second, then they stop again.
    * - No fan or drive noise.
    I tried to remove the battery and power cables and left the computer for a day before trying again. There is no difference except for a few plus-lumieres LED flashes for a second, the first time I try to start the computer. The next time I try, only a few lights flash again.

    After I discovered the startup problem I noticed that food is quite noisy. I also noticed that the machine has a small mark RENS in the plastic in the upper left above the screen. (Looks like a defect of manufacturing error or transport) You hardly notice the 1 cm small inconsistency in the plastic, but it doesn't look like a normal scratch.

    As I thought that food could be the cause of the problems because of the strange sounds, I brought the maschine to a PC technician today. He tested the food and said it was working normally, but he also said that this should not seem like that. He did not open the laptop, to not cause trouble about the Toshiba warranty.

    I bought the computer to the Denmark I wanted a Danish keyboard. However, I live in Portugal, where I use the computer. Where is the PC now.

    Do you recommend that I contact an ASP to the Portugal to fix the PC or do you propose I have return the PC to the merchant at the Denmark?

    The ASP will be able to exchange the screen and power supply that are not in the State, they must be good obviously both?

    Thanks for the tips!

    Hello

    First of all I must say I never had problems after 3 days of my new Toshiba laptop but these things happen and no manufacturing activity is perfect.

    In addition, I agree with you. I would bring the laptop to an ASP because it seems that this motherboard is defective but I do not know Mr. it's only my personal opinion, and therefore the laptop should be checked by a technician for laptop.

    As far as I know that the laptop is covered by 1 year international warranty and so I would contact the ASP in your country. Ask them if they can fix your computer laptop and if not, you must communicate with other ASP where you bought the laptop.
    I think this is the best solution because they can tell you what to do exactly.

    Good luck and I m sure that your laptop will be repaired as soon as possible.

    Welcome them

  • Satellite L30 won't start - error below messages

    Can anyone help please? I have a satellite L30 & out of no where it does not start
    below error. I entered the bios & checked initialize preferences (disk HARD, ETC.)
    but all I get is the message below. I also tried a system restore, but nothing.

    For realtek RTL8139 (X) /8130/ 810 X PCI fast ethernet controller v2.13 (020326)
    PXE - E61: media test failure, check cable of
    PXE - M0F: Existing PXE ROM.
    operating system not found

    When I boot with the recovery CD in I get the message below

    Windows has encountered a problem... etc etc etc the usual windows bit.
    then

    status Oxc0000e9
    Info unexpected i/o error has occurred

    Thank you all
    Mark

    In my opinion, the HARD drive is certainly the reason why the laptop tries to boot from LAN.
    Yes, the laptop computer tries to boot from LAN and, therefore, the error message (PXE - E61: media test failure, check cable) is displayed.

    I think that a HARD drive replacement and the new installation of the OS will help you solve this problem.

    Greetings

  • Satellite R630 won't start

    Hello

    My brother has a R630 that will not start, when I turn it on the light flashes and Toshiba Flash then screen for a moment but then the screen goes black with a flashing cursor in the upper left corner of the hard drive. The led power and wireless light stay on so the laptop has certainly the power.

    I can't start in safe mode, the only info I have is that my brother told me that he was doing an update of windows at the time.

    Can someone please help me because my brother is desperate to get back to work.

    Kind regards

    DAZ

    > When I turn the hard drive light flashes and the Toshiba Flash screen appears, but then the screen goes black with a cursor blinking in the upper left corner

    Cursor blinking in the upper left corner is a typical sign of a malfunction of the HARD drive.
    You can try to check the status of the HARD drive in the BIOS. Press the power button / stop, then press F2 to access the BIOS settings. If the HARD disk does not appear in the BIOS, it means that the HARD drive is dead for sure, and in this case, you need to replace the HARD drive.

  • Satellite C650-1CP - cannot start Windows

    My C650, running on Windows 7 could not start properly today. When turn on/off he went to the Windows Error Recovery screen and gave me two options: run a startup repair and start Windows normally. I clicked on the repair option and on the bottom it says windows is loading files, then it's another loading screen, and finally to a black screen, which, after a few seconds, a cursor appears. No matter how long I left my laptop on nothing changes. So I decided to choose the second option, and he went to the splash screen windows with the logo of the movement. This form lasted around a minute, and then a blue screen with an error, which is then passed to a black screen. To see this error, I completely disabled the auto reboot on system failure in the F8 options and once restarted, he took me to the same error page.

    On the blue screen error was as follows:
    UNMOUNTABLE_BOOT_VOLUME

    She was followed by information saying that it's maybe a software / hardware problem and also to try safe mode.

    Technical information at the bottom were the following:

    STOP: 0X000000ED (0XFFFFFA8003DDFA50, 0XFFFFFFFFC0000185, 0 X 0000000000000000, 0 X 0000000000000000)

    I don't have a recovery disk, if I looked on websites have said recovery is built in. I also tried safe mode, repair your computer, last known config and other options in the F8 key, but these do not properly load and I end up on the black screen with a cursor again.

    I had originally to Exchange my laptop in a week to buy it because it was defective and I had a little less than 11 months, I wonder if there is a solution to this problem and also know if I am covered under warranty for this problem. Thank you.

    Hey,.

    Bluescreens are mainly problems of software or drivers so I think that reinstalling Windows would help to get rid of this.

    Why you don t have a Toshiba Recovery disk? I mean in the user manual it clearly written that you have create such a floppy yourself and it only takes a few minutes and you need to blank DVDs. All that s.

    The recovery disk contains an image of the settings from the factory with all the drivers and tools. It is an image pre-tested by Toshiba so everything will work after the installation of recovery. With this record, you are on the safe side.

    Anyway, you can order a recovery disc here:
    https://backupmedia.Toshiba.EU/landing.aspx

    Software problems are not covered by the warranty. Of course, you can make the laptop to an authorized service provider and guys are going to reinstall to factory settings, but you have to pay for this service.

  • Satellite M45 won't start at all

    Greetings! My Satellite M45 seems to be really sick! It started a while the battery dies slowly, and finally, the laptop would refuse to go into the BIOS to the battery power.

    I ordered a new battery (which I'm still waiting) and continued to use the computer laptop external power, but every now and then, he would refuse to boot from an external power supply.

    When you press the power button, the screen 'TOSHIBA Touch with tomorrow' arrives - but with a problem - then crashes (with the fan). The problem (other than the hanging), is that the screen is 'moved' to the left. Rather than fill the entire screen, the start screen "ignores" the rightmost 2 inches and a half inch low and appears in the rest of the screen. Its a little hard to explain...

    This morning, refusing to boot at all!

    Any ideas? I tried to reinstall the ram, turn on/off without battery, only on the battery, I have removed all the 'extras' and am quite a loss now!

    I can't go to the menu of the bios either - so its very frustrating!

    Any help would be great!
    Michele

    Hello

    This s a shame! Description does not sound you well ;(
    For most hardware is malfunctioning if the laptop is unable to successfully pass the TOSHIBA Touch screen with tomorrow!
    Seems the POST (power on self-test) failed!

    I think that there's not a lot to do! The laptop must be professionally checked by an authorized technician. Guys might start and run tests from diagnostics and could locate the source of the fault.

    Call the ASP in your country and describes the history and details. I guess you will have to send the laptop to the service provider authorized ;(

    Good luck

  • Windows didn't start status 0xc00000e9

    Hello..

    I use dell inspiron n5010. I installed vista 32 bit. When I start my computer, it shows the status above. I can't go for sure modeor any other advanced boot options.  After using the installation disk, the problem will be solved. But every time I have to install any device driver software or any other software it shows the same error. what I can do. I've used hardware diagnostics.  It passes all the tests.
    So I tried to finish the reinstallation of the operating system. But I encounter the same problem again and again. pls help me.

    Hi Agasthiya,

    Thank you to contact Microsoft Community and we will be happy to help you with your concern.

    According to the description, you get a boot error.

    The problem may occur due to the error of hard disk.

    Perform the steps from the link below and see if it helps.

    Check your hard drive for errors (Windows Vista)

    Warning of Chkdsk.

    Important: When running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this sector. If no data is available while data may be lost.

    Hope this information helps.

    Answer to us if you are having problems with error starting or any other issue of Windows, and we would be happy to help you.

    Good day!

  • Satellite M35 won't start

    Hello

    I received a laptop from a friend who asked me to try and fix it. The problem, it seems to have is the following:

    When you press the power button, the phone begins to launch, the Toshiba logo appears on the screen as well as the message press F2 for Setup or other. Unfortunately, it is that he will.
    If I press F2, the text at the bottom of the screen changes to enter Setup... but in fact is not (and I left for a long time, just in case). The person who brought it tells me that she was burning a CD and the laptop has frozen, then rebooted and showed the same behavior since then.

    I tried a new set of RAM as well as to try to boot from a CD, neither of which he seems to want to do.
    If I press ESC just before that the laptop shows the Toshiba logo, the boot sequence appears and stops at mouse initialized (if this help anyone)

    I know that I could send the laptop into a Toshiba repair center, but they are trying to keep the cost of the repair from the bottom. The laptop is also two years is not eligible for the guarantee.

    Any help or advice on what to try would be great because I am all of these ideas!
    Thank you
    Steve

    Hello Steve

    I understand that this person doesn t want to help, but you must know that at some point there is not much to do. If you are not able to enter the BIOS setting there is something wrong with the machine.

    You can try to press F8 after starting up laptop to see what is happening, but as I said there must be a serious hardware problem. If nobody here can help you, please communicate with the service. No you don't have to give them a unit to repair, but you can just talk to them and see if the issue as it is known and how much the repair will be cool.

    Good luck and please keep us posting if you know more about it.

  • Satellite M40x won't start after upgrade CPU test

    I have a portable M40x I took the CPU out of it to replace it with another to test the computer started fine then I stopped and took out and put it's original return CPU, and it wouldn't start. Now it primer with any one of all the CPU. When I turn on the power, all I get is a white screen for a few seconds and the laptop is closed down. Both the CPU is good because I since tested on other computers to make sure that this was not the problem.

    Anyone has any ideas on what is the cause?

    I m not surprised.
    As far as I know, Toshiba does not support updates, and it is not advisable to do something like that.
    It of one that the replacement of CPU on laptops is not easy and not recommended.
    The processors used in laptops are connected to the motherboard using a process called TCP (tape carrier package). It is a method of permanent connection and is used in the interest of miniaturization and heat dissipation.

    He was awarded the new heat paste? It s necessary and important if you want to connect again the CPU.

    It is perhaps a reason for not starting.
    I think more details you will get from the service guy in your country

  • Satellite M35X - won't start not

    Hello. I have problem at startup, when I am pressing the button of power fan, it starts and in some not seconds - no reactions on screen, HARD drive, not any kind of noise. Start button / stop lights. but nothing else. However, keyboard response on the 'Fn' key but it doesn't mean anything, in 15 seconds about there is no answer of keyboards as well, I tried to search results and uncharge battary several times, but it is the same. This laptop computer is in place of sand and as I heard thar couse a lot of problems for machinees. That this is perhaps no any service center you can suggest me a solution.

    Thank you in advance,
    Romano

    Hello

    What do you mean with this laptop is in place of sand?
    Where have you used this phone?
    Is there is only a software problem, so you should try to recover the laptop with the Toshiba Recovery CD supplied.

    But if there is something wrong with the material and in my opinion, it is, there is therefore no alternative to contact Toshiba service partner.

Maybe you are looking for

  • R100 mini PCI slot

    Is it possible for me to access the connector MINI PCI on my Portege R100? If so, how is it accessible? I want to upgrade the wireless network card. Thank you very much.

  • Why is my diary of fax sent empty?

    I have a HP 6500 e709n wireless on a Dell laptop running Win 7 64 bit. According to the owner's manual, I can see 30 last most recent faxes on my computer. When I click on "sent by fax journal" nothing happens. However, I am able to print the newspap

  • Split signals you are ordering

    I understand that you can use the module to SPLIT signals to divide multiple signals to a DAQ Assistant of multiple channels. My question is, what is the order of the split signals? If a DAQ Assistant has 4 signals which are then separated by then, t

  • To access the channels: Teststand - LabWindows, IVI

    Hi all I am trying to initialize a driversession with a logicalName which is stored in a variable of string teststand. Please take a look at the following code fragment. s_PMI_init (ViRsrc logicalName, idQuery resetDevice, ViSession ViBoolean ViBoole

  • Lost serial number

    I lost my serial number and I can not install. How ca I get it back or find it?