Satellite C650D - a high utilization of the processor and the disk

Similar Questions

• Re: Satellite Pro M70 - high utilization of the processor - low Performance

  I sincerely hope that someone can help you. I do not consider myself really computer illiterate, but this is where my understanding ends and I really value any assistance.

  I have a Toshiba Satellite Pro M70 for 2 years and I'm a final Defender to Toshiba. However, my operating system is slow. Average day use with Internet Explorer and Office 2007 is a laborious process that takes too much time. I have had conflicts with Trend Micro Internet Security 2008, that works perfectly.

  But turn on the computer takes forever. The CPU usage is generally high and System Idle process as well. I reinstalled Windows XP from the Boot Toshiba DVD already 4 times to nine and install everything over and over again. Each time after all to speed once again, performance is disappointing.

  I expanded RAM to 1.49 GB that makes little difference from the original 1/3 of RAM. It seems that something is slowing down the computer, but it is not visible in the process; but a certain process of svhost.exe who have the ability to handle little or the CPU usage.

  I've used Windows Gold Certified Uniblue Power Suite with a good registry cleaner. This helps a little, but after a few days, it seems only make it worse. I have a processor Intel Pentium M 1.73 GHz. search online reveals that Trend Micro IS 2008 is pretty good and demanding little capacity compared to the competing security packages.

  Is this system/software related or it could be a hardware problem?

  Thanks in advance to all!

  Hello

  I doubt that it could be a hardware problem, I mean a CPU usage can get if a certain service or applications would be run in the background of the OS.

  Generally, Antivirus applications are a kind of software that could cause this problem I had a Norton System works installed on my laptop and this software needs a lot of resources that slowed down the laptop
  In addition, some applications of Toshiba which are installed and running in the background may affect performance. But these applications are required to be able to use all the features of the laptop

  However, in msconfig you could disable.
  Launch msconfig-> Startup tab and disable some processes that are not necessary for you.

  In addition, you can use the CCleaner to clean the registry and operating system

• Leaks memory satellite L655 - 14 d, high utilization of the processor after Win 10 updated

  Hello world

  recently, I updated my Toshiba L655 - 14 d running on win7 Home premium 64-bit to win 10.

  After that update system is memory leaks, high utilization of the processor and get stuck every 5 to 10 seconds, is a rhythmic problem happens while Starter upward.

  If music is played nothing breaks and distortion, while using word or another office associated SW it became marked delay in the characters that appear on the screen, using the internet or live streaming is also not smooth.

  Any suggestions to solve these problems?

  It is advisable to change the RAM and upgrade to the new HARD drive (current RAM is 3GB 1066 MHz and is disc HARD 500 GB, ATI Radeon graphics card), if the change has advised if I want on the RAM even or I can go for a more of the same for the HARD drive also.

  Thanks in advance.

  You may need to check if the problem could be related to some drivers installed (maybe GPU driver would need an update) or 3rd party software.
  Background running processes in the context of the system could block the CPU, and this could slow down the performance of the system...
  So a quick glance in the task manager can be useful.

  Of course, upgrade of RAM can be useful too... If you run Win 64 bit system, upgrade of RAM is recommended.
  The 32-bit OS can handle only 3.2 GB RAM... so in this case the RAM upgrade would be useless.

  With regard to upgrading the HARD drive:
  The SATA controller is able to manage any size of HARD drive, but to be honest, this will not increase the performance of the laptop... But change from HDD to SSD drive would increase the performance of the system... so I recommend you replace the HARD drive with SSD drive.

• MacBook Pro random high utilization of the processor (iCoreService/DCAManager using + 400% CPU?)

  Hello

  I'm running an Early 2011 Macbook Pro running OS X Yosemite 10.10.5 with a 2.2 GHZ Quad Core i7 processor 1 TB Samsung 840 EVO SSD and 16 GB of RAM Crucial. I noticed for about a month, I'm going to do a simple task or two on my Mac, then all of a sudden I noticed spikes CPU temporary, 90 + degrees C and the kick of fans trying to cool high speed. Well, I don't know why this is happening when I do nothing to justify a high utilization of the processor. I'm used to the CPU running hot when I do something intensive graphic as running Autodesk Inventor CAD software, run a machine virtual or even watch a 1080 p @ 60 fps video on youtube (it is the lowest resolution that requires the Mac switch to the dedicated AMD Radeon 6750 M GPU that usually eventually warm it quickly) , but this use high random that happens when I have Mail open in the background, and one tab open with a 720 p @ 30 fps video Youtube open (or even less). I took a few screenshots of the activity Manager indicating the best processes and Intel Power Gadget indicating the temperature of the CPU:

  

  

  

  Does anyone know what are iCoreService and/or DCAManager and why they use so much of my CPU when this happens? And someone has encountered this weird behavior before? Thanks in advance!

  The most likely cause is an applicztion you have running that is corrupt and forcing them to use the CPU too. Were you able to kill the process in activity monitor? If you have not yet tried to do, so I'll try that first. I would also try to quit all open applications.

  If you start the computer in Safe Mode , you can test if the problem is still there. If it isn't, usually means something that is managed by you start-up or an application that you use may be the cause.

• In obtaining Windows XP SP3 notice of high utilization of the processor, but do not know the cause

  I keep having problems with high CPU usage, but I don't know what is the cause. I know Norton has sent me a few messages on dumprep.exe high utilization of the processor, but this isn't the only time where she do this and it is causing my computer runs slowly, and a few times the last 2 days that makes my strongest computer. I hope someone can help because I don't know anything about all this

  Hi SandieLaster,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. When the high CPU usage occurs?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• high utilization of the processor in standby mode / x 230

  Hi all

  I have an i5 x 230, win8 installed pro on an ssd crucial msata m4, 16 GB of ram. Recently, I noticed a sharp decline in the life of the battery. I believe that this is due to the high utilization of the processor when idle, I see it in the Manager of tasks and shows the process system hovering over 30% cpu usage. It goes down when I restart, but just on the rise after some time, perhaps on his return from his sleep.

  Does anyone have any idea on this? I tried to get a little knowledge base, but nothing came.

  Thank you!

  Hello

  Maybe it will help the following message thread: Ricoh card reader use 25% CPU

  Kind regards

  Aryeh Goretsky

• High utilization of the processor all in buffering a video

  I have a high utilization of the processor (over 40%) while only buffering of this video.

  IE10pre1

  

  Firefox 20121229 nightly, protected mode enabled

  

  Firefox 20121229 nightly, protected mode disabled

  

  Opera Next

  

  Chrome Canary

  

  a) open this url: http://www.wimp.com/marsearth/

  (b) pause the video if it starts automatically

  (c) use the the Task Manager or process explore to display the cpu/gpu use

  reproducible: for most

  Windows 7 SP1

  Flash Player 11.6.602.108 / HWA enabled

  TestPC: Gigabyte GA-K8NS Pro; Venice AMD Athlon 64 3200 +. 2 x 1 GB DDR MDT-400-CL2; Club3D HD4670 AGP; Samsung HD103SJ, SyncMaster 204BM

  While we are aware of the problem, there is little we can do about it.  The modern realities of security of the web browsers have made sandbox, a necessity.

  There is a good explanation of what is happening here: http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html

  Long story short, every video packet must be transmitted from the browser to a medium integrity process broker, then the integrity process low drive flash for rendering.  If an attacker is able to hijack the thread of Flash Player, the process is low integrity, which prevents the attacker to do a lot with it.  While it is not an absolute guarantee (nothing security is), it raises the bar significantly for the attackers.

  The downside is that all this additional message passing consumes cycles CPU, especially if you are trying to fill a buffer of exceptional size as soon as possible.  There's not a lot of opportunity to optimize this.

  If you're fine with the risk, you can manually disable ProtectedMode on your machine.  If you deal only with trusted sites, and you do not have anything critical with the machine (work, banking, etc.), then it is probably not a huge deal.

  Finally, ProtectedMode is like a vaccine - it's one thing to immunity.  If the majority of people run it, exploits targeting machines without that it does not conform and probably not merit to be pursued when you look at the effort involved in the development of a feat of end-to-end.  If a large number of people turn it off, it becomes economically attractive for builders of networks of zombie computers, and you will have problems if you do not use.

  To disable the Protected Mode, add the following line to your mms.cfg file located in:

  32-bit Windows: C:\windows\system32\macromed\flash

  64-bit Windows: C:\windows\syswow64\macromed\flash

  ProtectedMode=0 
  

  If the mms.cfg file does not exist, create one to any text editor standard (p. ex. Notepad)

  Depending on your operating system, you must first save the mms.cfg file in a directory writable (for example, your document or desktop folder), and then copy the file into the folder using Windows Explorer.

  To re - enable Protected Mode, simply delete the line in the mms.cfg file.

• THE TASKHOST. EXE, high utilization of the processor - Satellite Z30 / Win 8.1 64 bit

  Hello

  I'm looking for a way to * find the battery life... *.

  For some time, the * TASKHOST. EXE *, "host process for Win tasks" (pl.: "trial dla zada hosta?) systemu Windows") * runs all the time, consumes about 30% of the CPU. It works even without any program began.

  Results:
  (1) * autonomy is much shorter *, about 5 hours from 10 hours earlier.
  (2) * the cooler fan is on a higher speed all the time * (previously - only occasionally switch on).
  (3) * around CPU is hot all the time * (see: cooler fan)-previously it used to heat only during "heavy" tasks (e.g. image processing).

  After a few tips, I turned off CARS in the Task Scheduler - no changes whatsoever.

  I would be grateful for guidance on how to make "taskhost.exe" more energy efficient.
  Thanks in advance for any suggestions!

  THE TASKHOST. EXE is a Microsoft Windows systems internal generic host process and has nothing to do with the laptop or computer manufacturer.

  I found the similar discussion which has already started in the community Microsoft.
  I think it might be useful for you to check this discussion:
  [The taskhost.exe application consumes 50 to 60% of the average utilization of the processor | http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/the-taskhostexe-application-consumes-50-60-of-the/0882ab46-43ee-4d90-8404-6802f8f4f2cf]

• Why is my norton antivirus telling me that I have a high utilization of the processor by Wbengine.exe? ON my pc with Windows 7?

  Why is my norton anti-virus alerts me to have a HIGH USE of the WBENGINE processor. EXE? on my pc with Windows 7?

  What this mean and how can I solve this problem?

  Hello maggievandevanter,

  You have an automatic backup or a scheduled backup process turned on? The wbengine.exe is a file, usually located in \windows\system32 and is responsible for scheduled tasks. Please check your task scheduler, if a scheduled task is there.

  Hope this helps,

• High utilization of the processor after installing the HP printer

  My computer is running Windows XP. When installing recently my computer HP printer failed complete installation on the supplied CD.

  Then I noticed a dramatic slowdown in the speed of the computer.
  I uninstalled the HP from the disk and was able to install the printer using the HP Web site.
  Since my computer is very slow to start. While they inspected the Task Manager, I noticed that Explorer.exe uses sometimes up to 100% of the CPU. How can I fix it?

  What is the processor and RAM how much your computer have? Make a right-click on the icon my computer on your desktop and select properties for this information.

  Try Ctrl + Alt + Delete, select Task Manager, and then click the performance tab. Under Commit Charge, which is the Total, limit, and the pic?

  I'd be interested to see a report of Disk Defragmenter. Open Disk Defragmenter and click analysis. Select view report, and then click Save as and save. Now find VolumeC.txt in your My Documents folder. Open the file, and place the cursor anywhere in the file, select Edition, select all to select all the text and copy and paste into the body of your message. To do this, before you run Disk Defragmenter because it is more informative.

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• High utilization of the processor and memory virtualized vCenter 6.0

  Hi community

  When I upgraded my physical servers, they told me that virtuelise the vCenter server was recommended by Vmware.

  so that we did it, but since I think that when I connect to my vCenter with RDP sessions, the server was slooooow...

  then I watched the Führer in there and he uses 97-99% of the CPU and 99% of the memory, I spent 8 GB of memory, 2 CPU.

  I have my SQL DB on the same server running as a SQL Express 2014. windows server is trodden updated and so are the vCenter.

  After a while of google, I found this post, but don't relate to 6.0.

  Technical notes for Kayser: VMware VirtualCenter Server - use of the high memory in Java

  and article I found VMware are broken :/

  is anyone having problems with their both "?"

  I found the course.

  It was VEEAM who has not removed the temporary snapshot of the virtual machine, I deleted snapshots and my VM has it to 180 GB 400 GB

  and the CPU fell to 40-60% and 80% memory

• Satellite C650D - 11G - can't find the drivers

  My model in Toshiba unrated on support center. Nor with the serial number (8A475776Q) or the name of the model or auto detect so I can't update my drivers. Please help me solve this problem.

  I'm sure that's not my fault, but a malfunction because a few months ago, I could find and download the drivers from the site.

  Hello

  If your model was not recognized automatically there s no problem because you can search for drivers yourself on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Then search for:
  Laptop > Satellite > Satellite C Series > Satellite C650D > PSC16E

  Check this box!

• Satellite C650D is not booting from the CD

  My mother has a Toshiba Satellite C650D and password protect the hard disk. She forgot the HARD drive password today! I want to format the drive and reinstall Windows. I changed the boot sequence in the BIOS to boot from the CD drive and I like it start I press F12, but it goes directly to the HARD drive password screen. I change the setting to prevent fast boot but still no change.

  The only way I can boot from the CD is to remove the HARD drive.

  Are there any other settings that I can change to make it boot from the CD?

  I'm afraid there is nothing you can do about Mr. check please follow the documents:
  http://APS2.toshiba-tro.de/KB0/FAQ9401AR0000R01.htm
  http://APS2.toshiba-tro.de/KB0/FAQ9202JG0000R01.htm
  http://APS2.toshiba-tro.de/KB0/TSB6B01MC000CR01.htm

• Satellite C650D - Activate Wi - Fi is turned off and does not turn on

  Computer laptop Satellite C650D 006011 will not Wi - Fi switch on, even by Conectivity doctor or Instructions from Toshiba. F8 key does not appear on the monitor when the FN key pressed to activate a Wi - Fi connection.

  Laptop is about 12 months, a Wi - Fi connection worked initially. Have reinstalled the Wi - Fi drivers in an attempt to activate the e-mail... always to turn on Wi - Fi to connect.

  If the WLAN card is listed correctly in the Device Manager you should not reinstall WLAN driver. Driver WLAN has nothing to do with ON / OFF feature.

  > F8 key will not show on the screen when you press FN key
  Your problem is not WLAN driver and the functionality of the FN.
  Add the value of Toshiba install package.

  I can't get it for you because the description of the model 006011 C650D is unknown to me. Please recheck the model name and model number. You can find it on the bottom of your laptop placed on the sticker of Toshiba.

• Computer runs slowly, and indicates that there is a high use of the disk of Norton.

  Original title: dell inspiron 1545

  Why a box showing me I have high use of norton disc and my computer is running slowly I thank you for any idea.

  Hello Allan,.

  Sorry for the inconvenience. I'm Vineeth and I Support of Norton team.

  This is the alert function of Performance of your Norton product that notifies you of the increased use of system resources by any program. For more information, read: https://support.norton.com/sp/en/us/home/current/solutions/v36700885_NIS_Retail_2014_en_us

  You receive this warning frequently for a particular program? Have you run a scan using Norton product recently?

  Thank you!

  Vineeth

  Norton support