Satellite C650D - how the BIOS boot CD?

Similar Questions

• My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc. What should I do with it?

  My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc and I press F11, 12 > no response, F10 > BIOS Setup. What should I do with it?

  Brand: HP
  Type: laptop
  Model No.: Pavilion zt3000
  512 MB DDR1 RAM
  Thank you very much!

  Hi Dominic,

  Are you able to get into BIOS to make changes?

  If so, you can try to reset the default settings of the BIOS and check.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can also try to remove all external usb devices that can be connected to the system and start-up and see if the system boots.

• Satellite M30: How disable the BIOS boot password?

  Hello

  Before my vacation, I activated the startup password in the Bios. Now I want to turn this off, but it does not work. In the Bios, I can go to the Security tab, but I can't change the settings with the F5/F6 key or space. A beep is all I get. Entering on this point, I wonder to set a new password.

  Anyone know how to disable the password for a Satellite M30? Please note that I have not forgotten my password, I can always start the machine.

  THX,

  Werner.

  PS On this forum, I don't see any topic title, only the name of the authors. Is always normal? It is very convenient that way, but maybe it is related to my pc.

  Hello

  I found a step by step explanation to clear a BIOS password:

  "Turning on the computer from a State"off"with the ESC key. You are asked "password =". "

  Enter the password, and then press ENTER. The unit will display: "the valid password is entered, the system starts up. Check the system. Press key (F1). »

  Press the F1 key. This will start the device in the BIOS Setup mode.

  Using the arrow keys or tab, move to the password field and select REGISTERED.

  Press the SPACE bar, enter the password, and then press ENTER. For now, the password field is transformed into NON REGISTERED. »

  Hope this will help you.
  Good bye

• Re: Satellite C650D-12J refuses to boot from the recovery DVD

  Hello

  I have a Toshiba Satellite C650D-12J which has recently been ravaged by a virus and now refuses to start. Whenever he tries to boot into Windows, it restarts and blue screens.

  I ordered the Toshiba recovery media as the most simple solution is to recover the laptop and restore the default settings.

  However, when I insert the recovery DVD and choose to boot from the CD/DVD get them all is a loading bar that turns to a black screen with the white cursor. It's her!

  Can anyone suggest a solution?

  Kind regards

  Chris

  Hi MrChris,

  You have the same problem if you try to reinstall Microsoft Windows or just Toshiba Recovery disk?

• Satellite Pro U400 BIOS update failed - what is the BIOS Boot-block access

  Hello

  My last update of the BIOS has failed and my laptop PSU45E PrU400 Satellite is now out of use.
  I want to use the recovery disk of crisis with a USB floppy drive, but I don't know the key combination to run the boot block.
  Is that someone can help me?

  Best regards

  Hello

  I was wondering what crisis recovery disk you have?  :|
  In my experience the special drive is required, which is available only for ASP technician
  That's why it of necessary to contact the ASP in your country to reflash BIOS.

  In my opinion you shouldn't t try recovery disks of the crisis who loves you in the net, it can drive to the mobo damage

• Satellite P840 - Accessin the Bios or boot boot order

  Howdy all, first post here.

  I have a Satellite P840, part PSPJ6A - 00 h 001

  Windows 8.

  I have difficulties to access the Bios or boot order. I need to boot from a CD/DVD and I can't go in the boot options to change the boot order.

  I tried F12 F2 repeatedly pressing boot, pressing F12 and hold for 1 second (according to the manual) with no luck.

  What Miss me... I've never not been able to get start options before. The only thing is that it is Win8 which I am not familiar with.

  Any suggestion would be appreciated.

  Thank you

  Perform the shutdown complete http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm, restart the laptop press F12 and you will be able to enter the boot menu. Here you can choose which device should be the first boot device.

• Satellite A350D-113 - how the BIOS recovery after faulty update?

  Hi guys!

  Yesterday I stumbled accidentally updating BIOS for my satellite A350D-113 and computer interference in the process. Now, I've got is this common black screen, fan turns and CD-rom checked.
  I know there are discussions on this issue, but all of these senses are very different. Can someone help me with step by step "what to do"?
  I did not usb floppy, but I suppose a common CD - R should be fine replacement.

  I'm desperate rly.
  Thanks in advance.

  Hey Buddy,

  If the BIOS update failed, you can do anything. You need professional help of an authorized service provider. Technicians can try to reflash the ROM module

  Here is their list:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Satellite L500/013 - how the dual boot of Windows 7 and XP?

  Hello

  I just bougth my first laptop from Toshiba, it comes with Windows 7 Professional pre-installed. Before you start to spend hours on it, I wonder if this can be done:

  (1) I would like to use the Windows 7 Professional 64-bit mode, then

  (2) create the second partition on the hard disk to install Windows XP 32 bit on it.

  I was wondering if this is possible and what is the recommended installation sequence. First thing I need to do is to create the recovery for Windows 7 disk, so I guess I have to configure Windows 7 first of all?

  Thanks for any help
  Thomas

  > The first thing I need to do is to create the recovery for Windows 7 disk, so I guess I have to configure Windows 7 first of all?
  Well, it is highly recommended! Before you do anything with your HARD drive, you must create the recovery disk!

  I m not very well how you can set up a dual boot with Win 7 because I didn't try this, but I did using Vista.
  First you must create a second partition in Vista. This could be done in disk management.
  Then I installed Win XP on the second partition. But after installing XP I could not launch Vista because Vista boot manager was damaged by Win XP.
  To resolve this problem, I used an original disc of Vista (not recovery disc). I started the Vista DVD and it has repaired the Vista Boot Manager. In Vista, I installed EasyBCD.
  EsayBCD is a small tool that allows to add Win XP to the Vista Boot Manager s.
  After the new Vista and Win XP reboot is appeared in the Boot Manager and I could choose between the two BONES.

  I think that you need the same procedure using Win 7

• Satellite C650D: How can I create partitions?

  Hellooo

  can someone help me?
  I have laptop Toshiba Satellite C650D when I bought it, there is only one partition of hard disk, I want another 2 or 3 partitions it how can I do it?

  Hello

  You can create partitions in Win 7 disk management.

  Firstly, it must reduce the old partition. You will then get a free space on the HARD drive where the new partitions may be created.
  The entire procedure is very delicate. Further details on the Microsoft Win 7 page:
  http://Windows.Microsoft.com/fr-FR/Windows-Vista/create-and-format-a-hard-disk-partition

  I hope this helps a little.

  But before you change this, I recommend creating a recovery disk!

• Satellite 210CS: How can I boot from CD?

  Hello

  I found my old Satellite 210CS and I want to install Linux on it, but I can not find the floppy drive, I just got the drive of CD-ROM. I changed the boot options in the bios to FDD > HDD but its not not booting from the cd. Y at - it an update of the Bios to boot from CD?

  Hello

  He is a former. About 10 years ago.
  AFAIK this laptop has an own FDD (floppy) drive and the CD drive is swappable. (You can use both, but not together)
  I found information that the BIOS supports that one disc at the time and the CD-ROM drive is not bootable.
  If you change the settings in the BIOS for HARD drive FDD so first Notepad starts from the floppy drive, and then from drive hard, but not on the CD!

  However, the Toshiba doesn't support Linux and you get not all Toshiba for Linux drivers.
  But haven't found this page:
  http://ferdyx.org/~Ferdy/laptops/RI-Linux/RI-linux_howto_en.html

• Satellite C650D how to change photo webcam recording place

  I looked online and my computer about how change where the pictures save too much after being caught on webcam. I'm not just have a bit of luck. Does anyone know how I can do this, or if its even possible. IM using a satellite C650D.

  Of course you can do it. Open your cam and on the left side, click settings.

  Under basic settings define the new location in file Photo.
  Can find you it?

• Satellite 4100XCDT: how the IRDA port works under DOS

  I have a Toshiba Satellite 4100xcdt. How do I assign a COM port to the IRDA (infrared) port in the BACK so I can use programs such as Winsamp
  http://www.veg.Nildram.co.UK/remote.htm

  The BIOS assigns COM1 and COM2 serial port to the built-in modem. However there is not a single option for the IRDA port not found.

  How can I make the IRDA port works under DOS?

  In my opinion it of not possible to use the IrDA DOS, because drivers must be installed and initialized.
  The IrDA port driver is a common Windows driver and the irda connection works only when windows was loaded

• Tecra S2: Question of characters with the BIOS boot password

  This is my laptop:
  Tecra S2: Intel Centrino Mobiltechnologie mit Intel Pentium M processor 740 / XP Pro / 512 MB DDR / 80 GB/15 "SXGA TFT / CD - RW - DVD - ROM
  Model PTS20E-18S032GR number
  purchase 30/01/2006
  link:
  HTTP://DE.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/SELECTED_PRODUCT_OPTION.JSP?SERVICE=DE&PRODUCT_ID= 106134 & DISC_MODEL = 0

  My problem is, that I give with the software Toshiba guard easily a password to start with 9 letters: "cjbasdahl." For safty, I write again the password. I do and write again, 'cjbasdahl '. The computer accepts the password because the first password is the same how the second password.

  When I start (boot) the laptop will have a password with 8 (not 9) letters. I can't use the password 'cjbasdahl '. What can I do? I form the password coz when I boot the leng even as the password or not?

  When I did find the password. What can I do?

  Hello

  The fact is that the BIOS password can be removed only by the service of Toshiba.
  There is no need of a special procedure that can be done only by the service man.
  There is no other way to make mobile accessible full

• Satellite A110 - update the BIOS for Windows 7?

  Hello. I found two drivers support page to your versions of BIOS for my Toshiba Satellite A110:
  01/21/09
  Update the BIOS
  Toshiba Windows Vista 32 bit 5, 40 - WIN World Wide
  01/21/09
  Update the BIOS
  Toshiba OS independent 2, 00 - WIN World Wide

  In 'other info' page on first bios there is a warning that this version is only for windows vista, and on the second page 'other info' he warns, that this version is not compatible for notebook computers equipped with Windows Vista.
  My first question is what this means? If I have OS Toshiba idependent 2.0 BIOS will not install Vista?

  My second and more important question is what version of bios should I install if I now use WINDOWS 7 32 bit?

  Hello

  > My first question is what this means? If I have OS Toshiba idependent 2.0 BIOS will not install Vista?
  You should be able to install Vista using BISO 2.0 but maybe your laptop will generate some questions
  So you need to update the BIOS to 5, 40 - WIN version if you want to use Vista OS.

  If you want to use Win 7 on your laptop then you must first install the Win 7 OS and then you should check out how Windows 7 is running

  Welcome them

• Satellite L850 - opens the BIOS on reboot, even if no one press F2

  My laptop opens if restarted BIOS through Windows, even if no one supports on F2, but this only happens when I stop. I recently updated to the latest version of Windows updates. Funny, it's guaranteed expired 2 days ago. I had to manually, press the power button just started my unit.

  The unit is a model of Satellite L850-B150.

  > My laptop opens if restarted BIOS through Windows, even if no one press F2, but this does not occur when I shutdown

  I understand this correctly?
  The laptop and the system works properly. If you click on restart the device stops, then boots to the top and switches in the BIOS.
  Is this correct?

  Hmm its really strange.

  To be honest, I don't think that its a software issue related because no application is able to access the BIOS directly after the POST (power selft test) has been produced.
  This is why I think it could be a motherboard problem material? Keyboard? I m not quite sure

  However, go to BIOS (F2) manually and set it to default settings (F9). Save the changes and restart the device.
  Check if the device would still access the BIOS automatically.

  In which case the matter would be always available, recover laptop using Toshiba recovery media.
  This would create the laptop back to factory settings.

  Finally if this is insufficient, the device must be checked by professional service guys.