Satellite C660 - 1 7 - cannot run the BIOS update

Similar Questions

• Qosmio G20-115 - can't seem to run the BIOS update

  I have a Qosmio G20-115, which I'm trying to run an update of the BIOS on because what he s not recognizing nor charge the battery, it s give an error message: The Ac adapter is not connected, or not enough battery power.

  What can I do to run the BIOS update successfully or get the laptop to recognise the battery?

  Hello

  What happens if you remove the battery and the laptop works on AC power only?

• Satellite L350 - does not start after the BIOS update

  Hello

  I recently (yesterday) downloaded the latest version of bios update dated dated 25/02/10 2: 20 - WIN, after download and does run the software from the laptop immediately stopped working and stop. I am now no longer able to boot up the laptop at all, all I get is the power light on and the hard disk light flashes, I hear the spinning CD/DVD drive, but what is not screen anything, I don't think this is the start.

  Is there a way to fix this without taking it to a store/engineer, BIOS recovery?

  The laptop is a Satellite L350, I opened the laptop to try to reset the CMOS by removing the card mother battery (not sure if it would have helped), but as much as I know it doesn't have an or I'm not.

  Any help would be greatly appreciated.

  Thank you

  Andy

  Hi Andy,.

  Hmm... If the BIOS update failed, you can't do anything because only an authorized service provider has professional diagnostic and recovery tools to redo an update.

  So in my opinion, you must contact a service provider authorized in your country. Get in touch with the guy and ask for help. They will tell you what to do now.

  Here is their list:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

  Good luck! :)

• Satellite L300-1 has 3 - after the BIOS update, I get a BSOD

  I have a Satellite L300 1A 3 MODEL PSLB8E. I decided to update the version of the BIOS, thinking that he can resolve my issue of ethernet controller.

  But after the update, my laptop goes on infinite blue screen of death. How can I recover from this injury?

  Can someone please help.

  Hello

  Did you choose the good BIOS update for your model? Was it for Satellite L300 PSLB8E?

  What code you get BSOD?

  After the BIOS update you must always load the default settings. Maybe a bad BIOS setting is causing this BSOD.

• Satellite L300D - does not load after the BIOS update

  I had to update my bios & it seems that that wrong has been downloaded about 3% by installing the laptop just die and not to revert to.

  There is no lights & there is no noise from the laptop at all.

  Can any ideas on how I fix?

  The laptop is a Toshiba Satellite L300D

  Hello

  Well, if the BIOS update crashed you can do anything because the ROM module needs to be reflashed. This is possible only with special tools and only an authorized service provider has such tools.

  Then please contact the nearest service Toshiba and ask for help :)

• Satellite Pro L300 - which improved after the BIOS update

  Hello users,.

  I just finished an update of the BIOS on Satellite Pro L300 using Updater Insyde Bios. I tried the Toshiba site to see what's new or what has improved since the update my bios 1.7version v2.2. But there is no search results. I also went to the site Web Insyde, but neither have they put up what has changed or improved?

  Is there a documentation or information which could help me to know how my laptop has improved or better after the update of the BIOS and what has changed since my update of the BIOS?

  Thank you

  Hello

  I assume you mean a changelog of the BIOS. Well, normally this document is placed on the Toshiba page where you can download the BIOS update.

  If you can't find such a t changelog, there is no available changelog. All that s!

  In addition the BIOS update should be performed only if it of really necessary. This means that if everything works fine, I don't see a reason to update because this update is a bit risky.

• Satellite L450D - nothing else happens after the BIOS update

  Toshiba Bulletin Board recommended 1 new message. Downloaded updated BIOS available. Frozen computer during the update and what would not be it. Now, the computer is totally dead. Power light turns on when the connected external CAP but nothing else. I did follow the instructions specific to Toshiba. Pleas advise.

  Thank you
  adrianevans

  Hey,.

  It of strange that the BIOS update gone wrong, because I already did several times and never had a problem did you run background applications they probably blocked the update?

  Anyway, what you can try is to remove the battery and the AC adapter / CC for a few hours. Then reconnect and try to boot up your laptop.

  In the worst cases the ROM module needs to be reflashed, but an authorized service provider can help you get rid of this problem. :)

• Satellite L855 does not start after the BIOS update

  I downloaded the BIOS update and followed the instructions there during the installation, but on reboot (including the requested configuration), I get a blank screen. Intermittently, the CPU fan starts and stops. I think that the BIOS update failed, how to solve this problem?

  Thank you
  Neil.

  Hello, Neil

  In General when the BIOS is screwed up you need professional help and you should contact the nearest Toshiba service provider and ask for help.

  See also this thread. Perhaps this methid can help you too.

• Re: Satellite U500-17 t Ducati - cannot start the BIOS update tool

  Brief description of the problem:

  I got by Satellite U500-17 t Ducati with Vista on board and he downgraded to XP Pro SP3.

  Everything works fine, but I can't start * [self-extracting tool Windows BIOS | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 198 & selProduct = 855 selSho rtMod = 887 & language = 13 & selOS = 10 & selType = 4 & d = yearuploa & monthupload = & dayupload = & useDate = null & mode = Chinas allMa & search = & action = search & macId = & country = all & lectedLanguage be = 13 & type = 4 & page = 1 & ID = 73306 & DISO =-1 & driverLanguage = 42] *. It works simply and nothing happens.

  For my previous experience of Toshiba laptops I remember that I have to install some tools Toshiba to make possible update BIOS, so I installed * [common Module | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 198 & selProduct = 855 selSho rtMod = 887 & language = 13 & selOS = 10 & selType = 93 & ad = yearuplo & monthupload = & dayupload = & useDate = null & mode = g machines & search = & action = search & macId = & country = all & electedLanguage s = 13 & type = 93 & page = 1 & ID = 71037 &] DISO = 10 & driverLanguage = 42] * and * [Hardware Configuration | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 198 & selProduct = 855 selSho rtMod = 887 & language = 13 & selOS = 10 & selType = 259 & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 259 & page = 1 & ID = 71076 & DISO = 10 & driverLanguage = 42] *. Well, installation of equipment installed OK and really works with the BIOS, but steel Toolbox update does not work.

  So the question is - what to do to run the Windows-based update of the BIOS?

  HW: Satellite U500-17 t Ducati (PSU5EE-01G029ND)

  OS: XP Pro SP3

  Can you please tell us why you want to update the BIOS of your laptop?
  You may have noticed a problem that must be fixed with a BIOS update?

  Is WXP SP3 you use original Toshiba recovery image?

• Satellite Pro A300-1LG - cannot enter the BIOS settings

  For some time when I turn the notebook on the page where it appears the Toshiba logo are not displayed and I can't get into the BIOS.

  And put back two or three times and then reappear details.

  I tried to reinstall the BIOS, but the BIOS installation tells me that the version I installed is the existing one.

  Do you have any suggestions?

  + The message was edited: assignment has been translated.

  *@manona*
  Please post in English. This is a user to user community where the English language is required!

  (* 1) * my knowledge the CMOS battery is soldered to the motherboard and cannot be replaced like for example on desktop PC
  (* 2) * remove the CMOS battery would NOT reset the BIOS nor would be to remove the passwords.

  If I understand your problem, you are not able to access the BIOS, but you can start the laptop and the system. Is this correct?

  You have a kind of password (user / supervisor password?)

• Satellite Pro 4600 cannot load the BIOS update

  Satellite Pro 4600. When starting I access Windows 2000 screen and then get the blue screen "The ACPI BIOS in this system is not fully compatible with ACPI." Please contact etc etc for BIOS updated. I downloaded version of update of the BIOS 2.60 since the Toshiba site and installed with a message "installed successfully". I always get the "bluescreen". Where I'm going wrong? Help would be appreciated.

  Y at - it the ability to boot the operating system in safe mode? It works correctly?

  Did you have a new installation Win2000?
  Give us more information.

• Satellite C660 need help to reset the bios password

  Hi all
  HELP me to reset the bios password laptop satilite c660

  Hello

  What is the BIOS password known to you?
  Isn't it?

  In this case ONLY the Toshiba ASP (authorized service provider) can reset the BIOS password.

• Satellite P205D-4378 crashed so that the BIOS update

  Hello everyone,

  It is my first post on the forum, although I've read here a lot.

  My problem seems to be classic: had several problems with my Satellite P205D-4378 crash.
  Visited the Web from Toshiba site, they have a BIOS update that fixes the problems that I have. I do the update, CRAAAASH!, dead computer.

  Death seriously.

  Turn on the other computer, search, find a few websites on "crisis recovery disk Phoenix.

  I read religiously, run to the store, buy a FDD, some readers, usb, the Bios file download, rename, make the drive...

  Trembling with anxiety, I press FN + b, switch on the machine, and it works!

  Well well... at least the works of the Zombie fashion: pink LED, high speed fans, manages the USB FDD, begins the USB FDD, he read for a good two minutes! Then nothing.

  'It's ok, it'll be ok' I think. The starting block is a program that is not more than 4 k, the computer has no bios, impossible to use anything, and must digest a 1000 k bios.

  I wait, nothing happens.

  SO what now? I tried the 'start FDD' ten times at least. Last try, I waited all night! I Went sleep after the computer read the floppy).

  Whatever I do, once the disk has been read, nothing happens.

  I turn it off, I unplug it, I try with battery, no battery, I speak well, I insult, I pray, I cry, I swear... NOTHING WORKS!

  I do something wrong, somewhere.

  On my drive are the phlash16.exe, the minidos.sys and the bios.wph (extract from a file named AASA40. ROM, downloaded with the pack zip on the toshiba site)

  What should I do? I read it on some forums that computer makers like Dell and Compaq deliberately disable the Boot Block Flash, is the same thing with Toshiba?

  The latest version of the bios that I have downloaded is corrupted?

  Is it possible that my motherboard is physically by the update failed? In this case, is it easy to replace yourself?

  I don't want to be ripped off by Toshiba for repair, if the only thing that I miss so far is a combination of keys at the end of the flash Boot Block recovery...

  In short, I'm lost.

  No idea to this wonderful group of reflection?

  Thank you

  Baaharb.

  I think that the update of the BIOS based on windows is security more like an update of the traditional Bios.
  Why? Because using the traditional BIOS there is always a risk that the wrong BIOS would be used.
  The BIOS using focused on victory, this risk does not exist.

  I know a lot of people who uses a bad BIOS and damaged module BIOS ROM.

  Anyway. To show you, I think that there is one solution as mentioned by delvoie, you will have to contact the local ASP.

  See you soon

• Ports Satellite A135 - S2306 defective USB after the BIOS update.

  OK, I searched all over the internet and not found anyone else with this same problem, or anyone with a solution that worked for me.

  A few weeks ago, I had the common error of the BIOS reset itself and asking for a password at startup. I took my local Toshiba authorized repair center, and they have not taken care of him, no problem.

  Since the resume, however, all 4 of my USB ports have been going crazy. What happened in the following three steps (in order):
  -One of the ports does not work at all, won't provide any current or even recognize that nothing is connected.
  -The 3 remaining ports are now only recognized as USB 1.1 ports, not USB 2.0 as they were before.
  -Now, only a very small number of my devices is not at all, with three USB mouse and two unrecognized hard drives work (I get the error message "USB device not recognized" standard Windows when I connect them to one of the three ports).
  I am running Vista Home Basic (32 bit) with SP 2 and the new version of the BIOS is v1.60.

  Is this something people of repair caused when they have unlocked the BIOS and updated? Is this a problem with the new BIOS itself? Any help would be GREATLY appreciated! Let me know if I let him out any relevant information, I tried to be as complete as possible. Thank you!

  The old Duke

  Hello

  > What is the repair people caused when they have unlocked the BIOS and updated? Is this a problem with the new BIOS itself? Any help would be GREATLY appreciated! Let me know if I let him out any relevant information, I tried to be as complete as possible. Thank you!

  It is not easy to say. I think that would be best to ask guys why it happens or what they have done in the past.
  But have you set the default BIOS?
  Please do; access the BIOS (by pressing F2). Set it to default by pressing F9 (I guess) and save the changes. Restart the unit.
  Access the Device Manager, and then remove all hubs USB and commands from the list of devices. After that reboot the device again. Windows should recognize the devices deleted again.

• Satellite L30 does not start after the BIOS update

  Hello

  I upgraded my BIOS Satellite L30 and now the laptop will not boot. When I turn on the fan starts and that's it. I think I have updated the book with the bad BIOS... The laptop is only 1 day old... Is it possible to reset the machine to the default BIOS.

  Help, please...

  Hi Scott,.

  Unfortunately there is no easy way for you to go to your BIOS to its previous level. You need to entrust your laptop to a Service approved partner who has the necessary equipment to Flash the BIOS to the previous level.

  Kind regards