Satellite C660-11K - keeps freezing and unable to access the windows

Similar Questions

• I am unable to access the Windows XP updates and unable to set up the automatic update. I have not given an error code. I was only told I can't perform these functions.

  I am unable to access the Windows XP updates and unable to set up the automatic update.  I have not given an error code.  I was only told I can't perform these functions.  I don't have the windows disk that the computer came preloaded with Windows and I don't remember the Administor password I created 5 years ago.  Can anyone help?

  Assume that:

  http://support.Microsoft.com/kb/316524

  You receive an error message 'Administrators' only when you try to visit the Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/189126

  Microsoft's strategy concerning lost or forgotten passwords

  What I can offer: http://support.microsoft.com/kb/321305

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

• Satellite A100-225 keeps freezing and crashing with the new HARD drive

  Hi all

  I have a Satellite A100-225 with a 100 GB SATA Hitachi drive I int it that recently started showing bad sectors. Then I bought a Hitachi 320 GB SATA II drive to replace it. I tried the drive and it was recognized right away, so I didn't need to change the SATA speed. I ran the restore a disk installed newest. The problem I have is that the computer keeps freezing and crashing with the new drive. It takes a lot of time to load up when turned on and there is a noticeable to untermittant delay when you drag the cards around solo.

  I tried to run the Hitachi drive test and it comes back fine. I also tried to turn the SATA speed of the drive down from 300 to 150 via the firmware, and although I saw a slight improvement, it is still not right.

  I talked to Hitachi and they say that he could not be 100% compatible, so the problems. Someone at - it else sucessfully set up a replacement for this notebook drive and if so what make and model. Has anyone else had simular problems?

  Thank you

  Years ago, I've updated yet more former Satellite M70 with SATA HDD (270 GB if I m remembering well) and everything was fine.
  In my view upgrade with SATA HDD normal shouldn't be a problem. Do not SATA II because it will not work faster.

  I can't say for sure, but there must be a compatibility problem.

  Let's see if someone else had better luck with the upgrade of the disk on the Satellite A100.

  Have you checked this forum with advanced search option? Maybe you can find some old NET on upgrade the HDD on A100.

• Satellite L670: touchpad keeps freezing and moves in an own direction

  The button you use to the movement of the cursor keeps freezing and keeps wanting to go in its own direction,
  I've owned only the laptop for 3 weeks.

  Can someone give me an answer please.

  Hello

  Have you tried reinstalling the driver for the touchpad?
  If this isn't the case, please try this.
  Visit the page of the Toshiba driver and try to reinstall the driver for the touchpad that is responsible for the functionality of the touchpad.

  Welcome them

• My Acer Aspire V - 123 Windows 8 keeps freezing and some keys on the keyboard are not working

  I'm currently using a netbook ACER ASPIRE V - 123 with Windows 8 as its operating system and it is not yet updated to 8.1.

  At first when my computer laptop while boots 'seems' to agree, and whenever I try to open a file without any content it took me about 30-45 seconds, opening a program would take me almost 45 seconds to a minute, and I think that something is not right with my laptop and when I try to open a website via my web browser and my laptop would just FREEZE and I can't do anything about it , but I hate to do HARD reset. And to add to this unfortunate scenario is that some of the keys on my keyboard are not working the letters like R, T, I, O and backspace and many others (which I don't remember exactly one by one).

  I try to read some forums on different sites and some posts to the community of MS and did several tests like starting in SAFE MODE w / NETWORKING and downloaded the software like MALWAREBYTES to find potential infections, but nothing found. I also did the start-up in MINIMAL MODE, but again, the situation was the same, but when I'm the boot without failure the filling and freezing are only decrease and I don't want always starts in mode safe.

  From now my laptop is booting in a start-up in MINIMAL MODE and I don't know what to do next, what to try next. I hope someone could lead me to the solution to this problem, I would be eternally GRATEFUL.

  Please do help me in a step by step process and if possible please guide me with pictures or screenshots because I prefer to learn things when I Visual effects on what to do.

  Thanks for patiently reading this post.

  -Raphael

  Hi Ben,

  Sorry for the late reply, the laptop has been fixed, it seems to be a hardware problem. We disconnected the connection of the keyboard to the laptop right now I use an external keyboard to type. Cannot afford now to buy and replace my laptop keyboard, the graphics card Driver has been updated also and I've reformatted the OS

  The gel did not appear more in the normal boot and if all goes well for work this way for good.

  Thanks for the information you have shared to me, he has also been a great help.

  until next time Ben!

  Best regards

  Raphael

• Unable to access the Windows Update Web site.

  When you try to access the Microsoft Windows Update site, the following occurs. the Web page that says "checking to see if you have the latest version of..." "is displayed briefly. It is immediately replaced by a page of information. This has "[error number: 0x800A0005] the website has encountered a problem and cannot display the page you are trying to display." The options provided below may help you solve the problem,"with the other possibilities in clickable (I went through them but nothing helped...

  I tried Microsoft FixIt Center, but all she could do is to tell me that "necessary attachment components" but not which.

  I also tried to reset Windows Update components according to the instructions on "http://support.microsoft.com/kb/971058".. .no luck.

  I am running XPPro SP3 IE8.

  Symantec Endpoint Protection version 11.0.7101.1056.

  Any help much appreciated.

  Hello

  Perform the steps mentioned below and check if that helps:

  Method 1

  Check if the Windows Update Service is selected as a starting point.

  To do this, follow these steps:

  1. on Start, run and type services.msc in the Open box, and then click OK.

  In services.msc find the automatic updates service and double-click it.

  1. click on the tab log and ensure that the "Local System account" is selected for the account logon and the box "Allow service to interact with desktop" is DISABLED.
  2. in the hardware profile sectionin the log tab, check that the service is activated.
  3. on the general tab, the Startup Type should be Automatic, otherwise, the drop-down list box and select automatic.
  4. under "Status of Service" under the general tab, the service must be started, click the Start button enable.

  Repeat the above steps for the service "BITS Background Intelligent Transfer Service ()".

  Method 2:

  You can also re - register dll in Windows Update.

  To do this, follow these steps:

  1. Start, run, type CMD and click ok
  2. in the black command window, type the following command and press enter

  REGSVR32 WUAPI. DLL

  Wait until you receive the "DllRegisterServer in WUAPI. DLL succeeded"message and click OK."

  * Repeat the same step for each of the following commands:

  REGSVR32 WUAUENG. DLL
  REGSVR32 WUAUENG1. DLL
  REGSVR32 ATL. DLL
  REGSVR32 WUCLTUI. DLL
  REGSVR32 STINKS. DLL
  REGSVR32 WUPS2. DLL
  REGSVR32 WUWEB. DLL

  Method 3:

  Delete the corrupted Windows Update files. To do this, follow these steps:

  a. at the command prompt, type the following command and press enter

  net stop WuAuServ

  b. at the command prompt,

  type cd %windir% , and then press enter

  c. in the opened folder, type the following command and press ENTER to rename the Software Distribution folder

  Ren C:\Windows\SoftwareDistribution SD_OLD

  d. restart the Windows Update Service by typing the following at the command prompt

  net start WuAuServ

  Type Exit and press ENTER to close the command prompt.

  e. restart the computer and check if you have a similar question.

  
  For reference:

  You can access the event viewer on your computer and check the newspaper of windows for messages/error codes important related to the question and after return from errors in the event viewer.

  See the link below for more details:

  What are the information contained in the logs of the event (Event Viewer)?

  http://support.Microsoft.com/kb/308427

  Let us know if it helps.

• Unable to access the Windows 7 network or via router or ad hoc homegroup

  I have a very annoying problem. I have 2 computers clean. They were formatted and Win 7 ultimate was installed on both computers. They have a PCI card (D - Link DWA-525) wireless. Their material is identical, the same motherboard, etc., next to "Server" is the pentium 4 and the 'customer' is celeron.

  We have 2 routers and modem 1. The first router, Airport Extreme, serve as a DHCP server and provides the wireless network. The second router (TimeCapsule), supposed to be the first router ethernet extends wireless (Act as a bridge). I can connect to the network and the internet works fine.

  The problem is with the local network.

  I can see the two computers on the network tab. I can ping by IP and name. I made a Homgroup on the computer 'server '. The 'customer' computer is joined I can see the libraries. Firewall computer both are disabled. All firewalls, routers and modem are disabled.

  A double click of the library on the homegroup does nothing. Attempts to access the shared by \SERVER folder or by the tab network gives a "path network not found" error.

  Basis, such as the file and sharing, settings etc, are on. Password sharing is disabled. Encryption is 40-50 (not 128, I don't remember the exact number). It's both for the work at home and Public networks.

  Because I could not access the network, I decided to make a special one. Same problems. Even with the static IP address (192.168.0.1 [Server] and 192.168.0.3 [customer], 255.255.255.0 subnet) and NetBios forced to activated.

  I just can't make it work. I have tried many info from here and other forums, but nothing is working. The worst part is that another PC will join the network, but I have not do it again just because I can't do these PC to work. A test, I put the other PC on the network (Win 7 Home), and the same problem applied.

  All computers can see them in the network, two ping tab ways with IP and name, but when trying to access the pc via network, it gives the network not found error path.

  Yes, I shared files.

  Homegroup troubleshooting and network that find anything wrong or just can not solve the problem.

  Help, please!

  Hello

  The question you posted would be better suited in the TechNet Forums. We have a separate team working on these issues. I would recommend posting your query in the TechNet Forums.

  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?filter=AllTypes&sort=lastpostdesc

  Hope this information is useful.

• Error after fresh install Windows XP Pro Service Pack 3: you may be unable to access the Windows Update site... If these versions of Windows are not updated with the latest Service Pack

  I tried that at this link:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/error-after-fresh-install-of-Windows-XP-Pro/a617bb44-9944-4338-b82e-c18372ad986f?page=4&TM=1313954410562

  In particular, I tried everything (except #7-la destruction - because I just destroyed yesterday... LOL)

  1 reset
  2 Run Installer Windows Update Agent method 1 here: http://support.microsoft.com/kb/943144
  3 run the difficulty of method 2 here: http://support.microsoft.com/kb/943144
  4 run the difficulty from here: http://support.microsoft.com/kb/971058
  5 reset
  6 try Windows Update
  7 if it does not, repeat steps 1-6 before using your preferred method of destruction of the computer.

  I have a completely fresh installation. I reformatted yesterday installed the operating system, which comes with 3 SP.

  I used the Dell site to get the rest of my drivers and then began the process of trying to update. Immediately, I got the error above.

  According to that link above, 'FinnGange @ & anyone else having a similar problem: to avoid confusion, please start your own, new thread on YOUR specific problem and your computer. " Indicate your current version of IE, and the full version of Windows.

  So, here is my new thread! :)

  I am running XP Pro 2002 SP3 and IE8

  Please help me with this problem.

  Thank you

  Kris

  2 Run Installer Windows Update Agent method 1 here: http://support.microsoft.com/kb/943144

  If you go to that page and made scroll to Method1, you will see there are three installers. Which did you use?

  Also, what is the make, model and model number of your PC? Is your Windows XP 32-bit or 64-bit?

  Did reboot you after you run the Update Agent Installer?

  Dump you all your IE8 temporary Internet files and cookies?

• Updated by Satellite C660 - 11K and Bluetooth

  Hello
  I have a Satellite C660 - 11K & constantly receiving updates to Bluetooth v3.0 of Information Online Toshiba products. Have I not compatible Bluetooth & if not how can I get rid of the nagging update?.
  See you soon
  Mark

  According to laptop specification your model laptop doesn t have BT and these updates is not necessary.
  > How can I get rid of the nagging update?
  Remove the Toshiba system product information online and enjoy your life. ;)

  A question: is BT software stack installed on your laptop? Check in Control Panel > programs and features. If yes remove the system.

• Satellite C660 - 11K DVD drive does not

  I was just become acquainted with my new laptop Satellite C660 - 11K that I bought for Christmas and came to try playing a DVD for the first time tonight.

  The first one I tried was a business produced in format DVD RW DVD. When I inserted in the DVD player, I got a "Windows Media Player has encountered a problem during playback of the file" error message. Following the troubleshooting guide to check my sound, video settings and game controllers do not solve the problem.

  I then tried a purchased movie DVD (DVD-video format) and received the same error message.

  Finally, I have inserted an audio CD purchased and tried to play it through Windows Media Player and iTunes, but could not play all titles. The Gracenote software did, however, identify the CD and track names.

  By Device Manager, I found that my DVD drive is a TSSTcorp CDDVDW TS-L633C and that it is enabled, the value of region 2 DVD and it has drivers up to date.

  Am I missing something stupid that prevents me to get my DVD player to work, or do I have a defective DVD player?

  Any help or ideas greatly appreciated.

  Thank you.

  Hi mate

  Perhaps you need a firmware update for the CD/DVD drive.
  I found this Toshiba document:

  + ODD Firmware Update to fix problems with audio sound distortion on playback of the CD in Windows 7 +.
  http://APS2.toshiba-tro.de/KB0/TSB0502VV0000R01.htm

  Please check and if necessary, update the firmware!

• Photo of screen pixelated on Satellite C660 - 11K

  Hello

  This is my first post here and I'm having a problem with my screen. On a white screen like this page I have a pink pixelated background makes it very difficult to do anything.
  On other colors of background, there is the same problem just (wrong) colors.
  When I quit my screen looks perfect for a second or two before turning off. Also if I use the external monitor via the pc port it works perfectly.

  My laptop is a Satellite C660 - 11K and 3 or 4 years.
  Is this the end? Thanks in advance for any advice.
  Gene

  It is not easy to say why this is happening. If the captain on the external monitor is OK, it is evidence that this graphics card must be OK. The LCD screen is probably the troublemaker.

  How it looks like when you enter the BIOS settings. All appear correctly?
  What happens when you start your computer in safe mode?
  What you can do as the ultimate test is to install the original recovery image and test with "presets".

• Satellite C660 - 11K - limited access

  Hi all

  I recently bought a Satellite C660 - 11K, but there is a big problem. Whenever I connect to a wireless network, it connects for a minute or so removes the connections and said "limited access", he could return to be connected, but then goes back with limited access, so backward.

  However, when the laptop is connected to an ethernet internet cable works. I checked and the driver is updated, version - 1002.2.428.2010

  Can someone please help?

  Thank you.

  Hey,.

  There is a lot of discussion on WLAN on C660 then you should check the other forum threads on this issue:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59143
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=58744
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=57685

  It works for you too?

• I have an IMAc running on the latest version of El Capitan. MY blutooth followed pad has a mind of its own - opening windows and text highlighting / deletion.  In addition to this my screen keeps freezing and the spinning ball will appear.

  I have an IMac running on El Capitan 10.11.6. My bluetooth followed pad has a mind of its own - opening windows and text highlighting / deletion.  In addition to this my screen keeps freezing and the spinning ball will appear - I have to hold down the back of the screen to force it to close.  This message of the 2 line took almost an hour to type as I have no control on the touchpad.

  Hello Kluggerjo,

  Thank you for reaching out to the Community Support from Apple. I know how important it must be able to count on your devices work as expected, and I have a few steps that should help resolve the behaviors you see.

  I would recommend to go by resetting your management system (SCM) controller. MSC helps control and regulate different material on your Mac, including Bluetooth systems.  This article will guide you in this process: reset the management system (SCM) controller on your Mac.

  If you still experience the issue after the test, you can test the behavior to a test user. This will help us to determine if the problem is systemic or isolated to your user account. This article will guide you in this process: How to test a question in another account on your Mac user

  If the behavior is duplicated to the test user, I'd recommend reinstalling El Capitan. This will not delete your data. To reinstall using the recovery mode, take a look at this article: How to reinstall OS X

  If you experience any problems or have any questions, please let us know. The entire community is here to help.
  -Best regards

• Satellite C660 - 2 4 - LAN and WLAN driver issues

  Hello. My name is Alice.

  I have a Toshiba Satellite C660 - 2 4 laptop and I use Windows 7-32 bit.
  I have a small problem when you install the LAN and Wireless drivers. I chose the correct drivers, but after their installation, nothing happens. It stills shows an exclamation sign on the network controller and the PCI of Simple Communications controller (which I believe it is the wireless network).

  Please advice. Should I install a different Windows?

  Best,
  AJ

  Hello Alice

  Your laptop is supported for Win7 32 bit, so you can use it. I can see your laptop didn't come with preinstalled operating system.
  My advice to you: Reinstall Win7 32 bit and install all the other stuff following this order of installation:
  Windows 7
  TOSHIBA Assist
  TOSHIBA Bulletin Board
  TOSHIBA ReelTime
  Chipset SW installation utility
  Intel Management Engine Interface
  Intel driver
  Intel Rapid Storage Technology driver
  Realtek Audio Driver
  TOSHIBA supervisor password utility
  TOSHIBA HW utility
  TOSHIBA Flash Cards Support utility
  TOSHIBA Value Added Package
  Realtek LAN Driver
  Synaptics Touch Pad Driver
  Realtek card reader
  Bluetooth Stack for Windows by Toshiba
  Realtek RTL8188CE Wireless LAN Driver - http://aps2.toshiba-tro.de/wlan/
  ConfigFree
  TOSHIBA Network Device ID registry tool
  TOSHIBA Web Camera Application
  TOSHIBA face recognition
  TOSHIBA HDD_SSD alert
  TOSHIBA Service Station
  TOSHIBA Media Controller
  TOSHIBA Media Controller plugin

  Enemy WLAN driver please download the latest driver for Toshiba WLAN portal.
  One last thing: If some of the things listed is not available, it is not so important.

  Please send comments.

• My Satellite C660-1LD keeps restarting itself

  My Satellite C660-1LD keeps restarting itself. Does anyone know how to stop this?

  Hello

  What exactly happens? Can you please explain what is happening, but more detailed.