Satellite C660-162 wake ups opening lid

Similar Questions

• Satellite C660-162 compatible with Windows 8?

  Hello

  I just installed windows on my Satellite C660 - 162 PSCOSE 8 and I want to know if it is compatible with my Toshiba model, because I heard that windows 8 may damage the computer if it is not compatible with it

  Thanks in advance

  Hello

  In my opinion these should ask themselves before Win8 installed. More info about Win8 instalation on Toshiba laptops, you can read on http://www.toshiba.eu/innovation/generic/windows8-message/
  There you can check the support for your laptop model > Toshiba matrix compatibility. Check it out.
  >... I heard that windows 8 may damage the computer if it is not compatible with it
  I don't know what kind of damage you hear, but in General, you can install any OS and check if and how it works.

  The only thing that will be damaged is HARD drive recovery option, so I hope that you created the recovery disc until you have installed the Win8 version.

  If you have any other questions you are welcome.

• Cannot install Windows on my Satellite C660-162

  I have a Satellite C660-162 and suddenly it was so slow, so I tried to install a new Windows, but I couldn't install it and gives me this error Windows cannot be installed to disk 0 partition 1 or 2 and when I press 'Windows cannot be installed to this disk. This hardware of computers may not support booting from the disc. Ensure that the disk controller is enabled in the computers bios menu. »

  So I ve changed the priority of starting or something like from fast and it was normal after my Toshiba logo does not appear and I can't enter the bios setup.

  Thanx

  Stand by.
  You posted this in the recovery category.
  What do you do: try you use created recovery disc or original install disc of Microsoft?

• Satellite C660 - cannot save it

  Hi all

  I buy my Toshiba Laptop 4 days ago, now when I register my product it shows:

  Sorry!
  There is no such thing as a serial number. Click here to contact your local Toshiba Support Center for assistance.

  But what direction even series number in the form of support it show my model of laptop. How can I register my product?

  SATELLITE/SATELLITE C660 SERIES SATELLITE C660-162
  Satellite C660-162
  Part number: PSC0SE-01 G *.
  Series. : B 3, 5759 *.

  I bought it from Saudi Arabia. Please, help me to register my product. It's detail showing on the support form.

  Law of unity
  1 UNITS

  SATELLITE C660-162 [S/N: B 3, 5759 *-M/N: PSC0SE - 01 G 0 *]
  Details

  General information
  Stolen
  NO.
  Registered
  NO.
  Project
  ARABIAN DISTRIBUTOR
  Date of production
  2011-04-01
  Country of manufacture

  Shipping date
  2011-05-11
  Shipping country
  Saudi Arabia
  Date of purchase
  2011-05-11
  Country of purchase
  Saudi Arabia
  EAN Code
  402620388 *.

  Hey,.

  > Serial number does not exist. Click here to contact your local Toshiba Support Center for assistance.
  And did you already contact the local as Toshiba Support Center suggests?

  An alternative, you can contact Toshiba by e-mail under: [email protected]

  The problem here is we can t help you because it s just a forum from user to user, but I m sure that Toshiba or a support center can help you record your new laptop! :)

• Satellite C660 - installation VAP displays error 0x80C70220

  Toshiba Satellite C660 - 162 (PSCSE), Windows 7 Professional 32 bit, Value Added Package 1.3.19

  Well, I just my laptop format and not the function piece works for me. I tried to install PVAT but I get this "error 0x80C70220".

  Advice please!

  Hey Buddy,

  You have installed all the drivers for your laptop? Driver missing like chipset or else can cause this error.

  Also install the package of value added as an administrator. With a user without administrator rights account will not help you. Last but not least unzip all files before starting the installation.

  Check this box!

• Satellite C660-217 - failed to access the information after the opening of sites

  Hello I have a new Toshiba satellite C660-217 and loaded windows 7. I am able to get on the internet using a friends wireless, but when I try to open pictures on a site of real estate agents that they will not open.

  Also, I can't in my Facebook or my AOL e-mails.

  Can you suggest anythnig that will help me please?

  Hello

  Have you tried different browsers such as Chrome or Firefox?
  Access can be blocked by a firewall have you installed something like Zonealarm or similar?

• Satellite C660 - the disc drive tray opens not requested

  When I start to read a disc in the disc drive of my Satellite C660 drawer opens each time.
  Who knows how to solve this problem?

  To be honest I do not understand what bin do you mean exactly.
  Can you please tell us what disc you want to play and can you pleae make a screenshot of this plateau.

  It will help me to understand what you mean exactly.

• On my Satellite C660-174 desktop screen does not open properly

  I'm a newbie here so my question is maybe obvious to some, but not for me!

  My laptop Satellite C660-174 (running Windows 7) ceased to open correctly. Everything is normal until my password is entered. Rather than open up to my "desktop" with its icons all on the side I get a page with a banner "Toshiba Leading Innovation" through it and only four random icons on the side.

  How to restore my desktop screen and all the icons?

  Help will be appreciated.

  It's really not easy to understand what you see exactly.
  Can you please take a picture and send a link where we can see it?

  I really don't understand what could be the problem, but what you can try is to start your machine with F8 and enter advanced startup options. Choose the entry 'Repair your computer', then press 'Enter '. Go forward until you enter the system recovery options. Try to system restore to earlier date. Perhaps this will help you solve problem described.

  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

• The Security Center Satellite C660, showing the poor

  Hello.

  I have Toshiba Satellite C660 laptop. Buy 01/09/2011. I spend my computer and when I once again on I just opened Toshiba newsletter. There are health care system, Security Center showing the poor. But if 2 minutes on my computer then its good display auto. \My McAfee security is ok. but I do not understand where is the problem. Can u inform _ * me why Security Center showing poor when my computer is of.*_

  Thank you & best regards

  Send me the answer by e-mail: [email protected]

  Bimal Nag

  I put t understand what do you mean with display of poor.
  If everything is shown well more then everything should be OK.

• Satellite C660-268 does not start, no start screen

  My laptop Toshiba Satellite C660-268 was installing updates, then it froze for half an hour, I decided to force quit by pressing the power button.

  I tried power, portable could not wake up, I can hear the fan but screen is not black, no post/splash screen (Bios screen), turn on the led goes for a few seconds and then turn off. I tried to press the important function, but nothing could make my laptop boot or stay on. Please,

  I need your help in order to remake my boot laptop

  I think that some of the material died during update installation.
  From my point of few, it was simply bad luck that this error occurred during the update of the system.

  There is only one real solution: the troublemaker should be found and replaced.

  Theoretically, this issue can result from memory problems, but also the failure of the motherboard. The RAM modules are not very expensive and where the RAM is faulty, the fix is not a big problem.

  But in case of malfunction of the motherboard, the laptop repair could be a very costly affair.

  What could be the next step?
  I think if you have no experience of mainframe, you should seek some professional help and assistance.

• Need driver graphics card for Satellite C660 - 12G

  Hey!
  I tried to install picture to Exe on my new computer Satellite C660 - 12G, but when I click on the image of the exe icon to open it, ask me to update the graphic card driver... the problem is, I can't find this driver anywhere... C660 - 12G model does not appear on the list for the computer on the Toshiba site... Where can I find this driver? I paid for the TEPS program and I can't use it because of this missing pilot;. -(

  Thanks a lot for your help.
  Audrey

  All available drivers are available on the download page of Toshiba under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

  Your model of laptop part number PSC0QE, so choose it Satellite C660 with this part number.

• Webcam is blurry on the brand-new Satellite C660

  I just bought my Satellite C660 Saturday and have just opened the webcam for the first time.
  It is REALLY blurry. I can't seem to find an option in the settings to fix, and I gave him a towel to check that it was not just dirty.

  I read the posts about the different lights that can affect the quality of the image, but I just tested it out in the different lights and it did make a difference.

  Can someone give me advice! I'm not really a techno person and I really want the webcam to work so I can use Skype!
  Thank you

  Did you remove sticker protector of the cam?

• Cannot use my printer on a new Satellite C660 - 21Q suite

  new Satellite C660 - 21Q wanted to use my Lexmark 4600 priter obviously.
  but I told myself at the bottom of the support microsoft. NET framework V.2.0
  did; then RUN; everything goes well until 'Wizard' says 'impossible to run on a system 64-bit'
  WHAT I can't use my printer on a new pc suite?

  also downloaded thought framework 4.0 patch most recent would be useful. He did not. even after it ran ok

  Help

  I just searched lexmark 4600 Windows7 64 problem and the solution in 2009/10 is cj4600Win7en64.exe downloaded from lexmark BUT I couldn't find it. Have you looked at the printer properties in Device Manager and tried looking for an updated driver?

  The only other suggestion, I've got is open programs and features in Control Panel and click on turn windows features on or off. In the window that opens 1) read the text re filled and checked 2 boxes) at the entrance to .net and click sur-pour develop it can be helpful to turn on WCF. I know nothing else to facilitate the 'communications' and you have a multifunction printer.

  The only suggestion another and another - has your laptop downloaded all updates of W7?

• Satellite C660-1F1 - Minecraft ha_err_pid error

  Toshiba Satellite C660 1F1 my son with Windows 7 Home Preium will not run Minecraft and creates a dump of notification and error with Java runtime environment.

  Yesterday, I wiped the laptop with the recovery disk and installed all the latest drivers etc for a clean system as it has been very slow. I was hoping that this may have erased the old problem.

  I downloaded the latest version of Java, tried the 64-bit version as the Lpatop seems to be running a 64 bit OS, but I don't think that browsers are Java 64 bit test did not work and also some of the most common suggestions on the bulletin boards Minecraft. such as:--

  + "1) open Control Panel - > system and click on the tab of system properties." Under Performance click settings... button. Click the Advanced tab and under the virtual memory section, click on change the swap file a custom size, with a minimum size of 2048 and a maximum size of 2048. Click OK. (This may require a restart). ++
  (+ 2) where your Minecraft.exe file (in Notepad) create a file called Minecraft.bat, paste the following in this file:++
  ++ java-Xms256M-Xmx768M-jar minecraft.exe "+

  But all no no no avail.

  Here is an excerpt of the file:-erreur

  # A fatal error has been detected by Java runtime environment:
  #
  # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc = 0x6fa65861, pid = 4472, tid = 1860
  #
  # Version JRE: 7.0_21 - b11
  # Java VM: Java hotspot Client VM (23, 21 - b01 mixed mode windows - x 86)
  # Problematic frame:
  # C [aticfx32.dll + 0 x 25861] gslCfxExit + 0xe1
  #
  # Write core dump failed. Minidumps are not enabled by default on client versions of Windows
  #
  # If you want to submit a bug report, please visit:
  # http://bugreport.sun.com/bugreport/crash.jsp
  # The accident happened outside the Virtual Machine Java to native code.
  # See problematic frame for where report them the bug.
  #

  --------------- T H R E A D ---------------

  The current thread (0x4a3c5400): demon 'Minecraft thread' main JavaThread [_thread_in_native, id = 1860, stack (0x4ddb0000, 0x4de00000)]

  siginfo: ExceptionCode = 0xc0000005, address 0x0000013c reading

  Records:
  EAX = 0 X 00000008, EBX = 0X4DDFEEEC ECX = 0X0000000A, EDX = 0 X 00000000
  ESP = 0X4DDFE4F8 EBP = 0X4DDFE504 ESI = 0X4E9E2898 EDI = 0X4E9E07D0
  EIP = 0X6FA65861, EFLAGS = 0 X 00010202

  I think this thread has the solution. [http://www.minecraftforum.net/topic/1666540-ok-im-getting-really-annoyed-now/]

  I searched "aticfx32.dll toshiba satellite c660 error" because the error is related to aticfx32.dll. It seems to be a problem with the video drivers and the C660

• Satellite C660 - 13r PSC0LE - BIOS update problem

  I bought the Satellite c660-13r 11.05.2011

  After installing and configuring Internet conection, only he had messages on the Bulletin Board, NEW BIOS update the bios of the laptop of TOSHIBA BULLETIN BOARD. I updated the bios to 1.30 without any problem,

  NOW I HAVE A BIG PROBLEM.
  1 POST takes 30 sec,
  2 start windows is slow
  3. laptop is so slow I can cry!
  4. when I open the new window or klick simply open the new link, stay for 3-4 sec

  and I must ask, how is this posibile, when I open HWSetup, in the menu start-> toshiba-> utilytis
  I can see the BIOS. 08/04/2011 I can send screenshots of version 1.40

  How can I flasch BIOS with other versions,
  His big problem to work

  Thank you and I hope you can help me...

  Hello

  The version of the BIOS should be mentioned in the BIOS settings.
  Turn on the device, press F2 and verify the version here.

  Also I recommend the settings of the BIOS back to default settings.
  In the BIOS settings, you will need to press F9 to get the default value. Then save the changes and exit the BIOS.
  Restart the machine and check how many processes are running in the context of the BONE.

  I recommend disabling of certain non-essential processes in msconfig.
  There, you can go to the Startup tab and could uncheck the unnecessary process.