Satellite C660-1NJ - unable to connect to the wireless network

Similar Questions

• Satellite M645-S4070 - unable to connect to the wireless network

  Hello. I have a Toshiba Satellite M645-S4070.

  Lately, I have no problem connecting to networks wireless in my office. Until this morning when I start my laptop, I can't connect to the internet more. I already use a recovery disk to check if I can solve the problem but nothing is. When it connects to the LAN it runs.

  Thank you.

  Hey,.

  The wireless network adapter is listed correctly in the Device Manager? It is maybe just disabled, and you can enable/disable using FN + F9 key combination.

  You should write more details not connection might mean everything, so first of all, that you should check if the wireless network adapter is recognized and activated correctly.

• Satellite Pro 4600 - unable to connect to the wireless network

  Hello, I have a problem with my Satellite pro 4600 model # Ps460C-04NVX
  The problem is with the PA3070U-1MPC wireless adapter
  I see my network in a wireless network with excellent signal, but it does not connect

  I have a fresh install of win xp sp3. I don't have original driver cd.

  Can someone help me please? Thank you

  Hello

  As Akuma suggested you should ensure that you are using the latest driver WLAN on Toshiba website for your laptop.
  I founded your model on Toshiba Canada website: http://support.toshiba.ca

  Your network configuration is not kwon to me, but you should check the TCP/IP settings. If you have DHCP do you get an IP address from the router? You can check this in the start menu > run > cmd > ipconfig/all

  If you use a 3rd party firewall, you must disable.

  Good bye

• Satellite L40 - 18Z - unable to connect to the wireless network

  Hello.

  I just bought a Satellite L40 - 18Z. I tried to connect to the internet wireless, but I get the following message: "this computer doesn't have a card installed and configured wireless network."

  When I bought it I was told that it was active wireless.

  Can anyone help?

  Hello!

  Have you checked if the hardware switch wireless on the front of the laptop is on?

  You have yellow exclamation points?
  The wireless adapter is recognized?

  Maybe you should also update the driver and/or BIOS.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Satellite Pro L650 - unable to connect to the wireless network

  Dear Sir.

  I just bought a SatPro L650 (Intel i5) with welcome window 7 2 weeks and struggled to connect to internet. Each time it gives me the 'Network security Key Mismatch' message. I used the WPA/WEP key found under my Thompson router. Despite the advice to use Cap Lock still does not work. When I connect the router using the (yellow) Ethernet cable for the new laptop, I have no problem with the evaluation of the internet.

  I desperately need help and hope somebody can advice me how to overcome this problem in secular terms step by step (sorry I'm not a savy TI). Or is there a setting that I need to do on both the new laptop, as well as on my desktop (connected to the router).

  Appreciate your advice.

  See you soon,.
  John

  Hey Buddy,

  > "Incompatibility of network security key.
  This would mean the WLAN network isn t correct key.

  If the key on the bottom side of your router doesn t work it seems that you have changed the WLAN key in the past
  In the configuration of the router, you can change the WLAN key and set a new one.

  Check this box!

  By the way: If you can access the Internet through an Ethernet cable, configuration of the router to ISP (Internet Service Provider) is correct and that the problem must be the WLAN configuration.

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• Satellite L300 - unable to connect to the wireless network

  I have a NETGEAR router and a Toshiba Satellite L300 laptop HP DV2000.

  The HP can connect to my wireless network and also my neighbors network next door (which is not secure)
  However, the L300 can only connect to the network of my nextdoor neighbour even if it can 'see' the NETGEAR network.

  I changed the security from WPA to WEP up to now no security at all, and it seems not to matter.
  The strange thing is that my L300 CAN connect to a wireless network, but not mine!

  And my wireless network works as I can connect from my HP laptop.
  On the L300 it shows 5 bars on the NETGEAR is not a problem of weak signal.

  Any help would be appreciated.

  Try changing the WLAN settings on your router. Compare the WLAN settings on the settings of your laptop and the router.

  Test it with standard B on both devices.
  I mean if your laptop can see neighbours WLAN card wireless network in the laptop must be OK.
  I really thing all is due to wrong WLAN settings.

  Play around with that sort of thing.

• Unable to connect to the wireless network

  I have a Pavilion DV2000. I am running Vista 32 bit. Used to connect to my home wireless network, it stopped.  I have another computer that still works with the wireless network, so I guess that the wireless network is OK.

  When I look at the HP wireless assistant, it shows the conections of bluetooth, but does not show the wifi connection (as it does not exist).

  When I click on the network icon in the tool bar it ask to search for wireless networks, it says that there is not.

  When I look at the list of drivers for network devices there is no wifi driver.  I installed the driver broadcom on the site of HP rebooted and I still don't see the driver and the PC cannot yet see the wireless network.

  I looked at the list of hardware in Windows system information utility and it shows the Broadcom device, but it shows the address MAC is not available and there is no memory listed address.

  Does anyone have suggestions for a next step?  Is this a problem with the hardware with the broadcom device?  Is it possible to test?

  I found the solution to a different thread.  Reach:

  http://support.HP.com/us-en/document/c01087277

  Message edited by PatR the 28/08/2009 16:57

  I am glade to hear it all worked. If you please mark as resolved if we know that he has got to be resolved!

• HP ENVY 4520: Unable to connect to the wireless network

  My new printer is not connecting to my wireless network.  My router, it sees and accepts its letters of nobility, but then the printer is connected.  It will be displayed on my network for a second or two, but never stays there.

  I printed the "RESULTS of the WIRELESS NETWORK TEST" and he tells me that "the MAC address filtering can be activated on your wireless router that can prevent your HP printer to connect to your network without wire during installation.  MAC address filtering is disabled.

  I have connected many other features to my wireless network by pressing the WPS button and it begins to appear, but does not stick.  I also tried to manually enter the password without success (and the WPA key).

  Try to set up the printer with a static IP address that is not your router DHCP scope.

• Unable to connect to the wireless network after Windows update

  Original title: after receiving an update from Microsoft last week, my wireless is not working. He died immediately after the update. Why?

  My wireless does not recognize any of the wireless networks that are in my area. The driver manager indicates that the wireless driver works correctly. The wizard does not work and the Center wireless says that it cannot solve the problem.

  Hi JeffreySessions,

  ·         Do you have update installed?

  Follow these methods.

  Method 1: Follow the steps in the article.

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Method 2:  Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Update the latest drivers for the network card.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4: Follow the steps in the article.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=tab04

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• Unable to connect to the wireless network and also impossible to uninstall the network wireless driver

  Original title: wireless network card problem

  

  I have a laptop HP g series.

  I am not able to connect to Wi - Fi. The network symbol that appears at the bottom right does not appear. Solve the problem. He said it was a problem with the driver for the wireless network card. I tried to uninstall the driver, and this is the error I get.

  Hi Jimmy,.

  For a better understanding of the issue, I would need more information on your side.

  1. How do you uninstall the network driver?

  2. What is the number of the model of the laptop?

  This problem could occur due to corrupted wireless network driver.

  If you haven't tried these steps, I suggest to uninstall the driver from Device Manager wireless network and install the latest driver for the wireless network on the site of computer manufacturer.

  Step 1: Uninstall the wireless driver.

  a. Click on the Start button , and then type Device Manager in the Search.

  b. open the Device Manager and double-click the network adapter to extend.

  c. right-click on the driver wireless network which entered and select Properties.

  d. in the window open, click the drivers tab.

  e. in the tab drivers , click the Uninstall option.

  Step 2: Install the latest driver for the wireless network on the site of computer manufacturer.

  HP G laptop support

  See the articles for more information.

  Wireless and wired network problems.

  How can I troubleshoot network card?

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• C309g-m - unable to connect to the wireless network, touchpad hangs

  Hello.

  As PrintDoc has suggested, it's a new thread in the suite here, where I jumped in with a diversion to the station 23.  I'm sorry.

  Here are the details:

  (1) system:

  Router is Thomson TG585n provided by ISP O2/Telefonica.  Download high speed ADSL to ~ 9Mbps.

  3 devices connected and stable:

  -L' computer running XPSP3, connects to the router via homeplug (Ethernet on electrical wiring).

  -Laptop running Vista Home Premium, connects wirelessly with WPA2-AES.

  -Mobile phone runs Symbian 60, connect wirelessly in the same way.

  Router is configured to operate on channel 11 g wireless and accept new devices automatically with the appropriate security password.

  It is a House of 3 floors - router on the top floor has always worked. computer bureau on a middle floor with printer; laptop and the phone can be anywhere.

  So far so good.

  Now, I want to add the wireless printer and I'm really bad.

  (2) summary of symptoms:

  I bought the C309g-m on Amazon UK in January 2010.  USB connection with assistant easily.  Migrated to wireless via the front panel.  Easy. Then tried to add a 500 GB Freecom Network Drive (NAS device connected to the router) and has failed, because I didn't RTFM.  After removing the FND, I get an error message of HP to the effect that I have "tried to set the printer's IP address" and lost the connection to the printer wireless.  Have not seen this message since then, so I can't reproduce.

  As I said, I removed the FND, who never appeared on the network in any way.  However I still can't connect to the printer wirelessly.  The wireless connection wizard crashes after asking to specify a password.  The wireless network Test report that the radio works, but shows FAIL the entrance of 'No filter '.  I looked into the console of the router and there is nowhere to set the MAC address filtering, so I'm stumped.

  I tried to 'Add a device' CD, for network via USB settings.  It takes forever (30 minutes?) to come up with the same error "MAC address filtering.

  One last thing: if I leave radio turned on (the default lighting) will lock the touchpad after a few minutes to the home screen.  If I disable it, it's fine.  Once locked, the only way to stop is to unplug the power supply.

  Finally - all the base printer functions very well.  I can print and scan through the USB port and can take copies.

  Thoughts:

  (a) I think my router settings can be screwed.  I don't see a way to set limits to the DHCP pool, I should be able to.  However, since I was 3 devices that connect to the Internet I am reluctant to do a factory reset in case I lose those!

  (b) there's something wrong with the printer - but I don't know what.

  c) I could try temporarily move the printer to the i) door ii) within reach of hardwirable of CAT5 and wireless range

  (d) the fact that I can connect the printer (wireless) or DNF (cable) makes me suspect the router.  However, I have not received any support from O2: they said it was an internal problem of LAN/WLAN and nothing to do with broadband, therefore, were not willing to help.

  I spent hours on this and get nowhere.  Help, please!

  Tim.

  BTW - I'm in the United Kingdom.

  Well, I think that there are many more problems with 'atypical' routers and HP software as there are with HP printers.  I see not nearly as many problems with certified brand routers WiFi (like Linksys, Netgear and D-Link), as I do with large brands and Belkin.

  The worst offenders are rented modems/routers that your ISP provides.  For some reason, they have a lot of industrial property settings and firmware that simply don't play well with HP printers (may be others, but I would never buy another printer HP - I know way to much about printers after their design for 25 years).

  A reliable and good solution cheap is to go buy a $40 or $50 Linksys router and replace stuff not expensive you have (or paste according to your router/modem rented).   Time and time again, I've seen problems disappear just after installing a standard router.

  You can reserve an IP address for a wired connection, but because parts wired and wireless to the printer have separate MAC addresses, this IP address is not available for the wired connection.

  Read the thread if you wish.  Discover the solutions on this website if you want to, but I still think you have a defective printer.

• Is satellite C660 - 11 H - possible to change the wireless network card?

  Hi guys,.

  I'm looking to change the card Wifi on my C660 11 H since a Realtek 8188CE for a Realtek RTL8187B, for reasons that cannot be discussed on this forum. I was just wondering if the new card will be compatible, if I understand his also a Bluetooth card? I know that in the past, this is a case of grooving of the card and connecting the antennas.

  Finally, can anyone provide me the model number of the integrated Realtek WAN adapter? In system information, he simply says Wan Adapter PCI-E FE?

  Thanks for your help / Ryan

  Hey,.

  To be honest, it would be interesting to know why you want to change the WLAN card. You are not satisfied, or what are the reasons for this?

  In the forum, there are some discussions on the WLAN on Satellite C660 questions but this could be solved with latest Realtek driver and turning off energy saving as you can in large number of discussions:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=58756
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=58744
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=58733
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=58570
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=58481

• Qosmio F30-125 - unable to connect to the wireless network

  Hello

  After getting my laptop to my daughter I find that I can not connect to Internet. I can see the circles wireless and my Modem sky on it, but when I try to double click with the 'hand', nothing happens.

  I ran the program of connectivity doctor and he also tells me that I can not connect. Sorry I seem vague, but it seems so close and yet so far. I know I should put in my unlock key sky, but I need to be educated on how to use the Configfree software.

  Hanks in anticipation

  Hello

  Your ad is a bit confusing

  Your wireless network adapter appears in Device Manager correctly or you see a yellow exclamation mark on it?
  In your case, I would try to update the driver. You can download the latest version on the Toshiba site.

  Did you check if your wireless network card is enabled? Therefore, use the key combination hardware switch a FN + F8.

  By the way: that Qosmio F you have exactly?

• I'm unable to connect to the wireless network.

  replaced the card wireless and cant get driver for reinstall.

  Original title: replaced the card wireless and cant get driver for reinstall.  Help?

  Hello

  Please contact the Microsoft Community.

  You can't connect to the Internet.

  Please answer the question-

  (1) you are able to connect through the LAN cable?

  (2) what is the brand and model of the computer?

  (3) are you referring to the light on the computer or the router wireless?

  Method-

  I would have you look at the article-

  The problems of Internet connection

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-Internet-connection-problems

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  Do get back to us and let us know if you need more assistance. We will be happy to help you.
   
  Thank you.