Satellite C660-2 q 8 does not start with 8 GB of RAM

Similar Questions

• Re: Satellite A200 - 1 K 7 - does not start with 4 GB of RAM

  Hello

  I'm moving to 4 GB of RAM. According to the manual of my Satellite A200 1 k 7 supports up to 4 GB of ram.

  However, if I put two 2 GB modules the computer turns. Either one of the 2 GB on its own modules works fine, but both together won't work.

  The power led lights up, the hard drive whirs and then shuts. Nothing happens, not even a BIOS screen.
  My BIOS is updated. I'm using windows Vista 32-bit.
  The memory modules I use are the two SO-DIMM DDR2 PC2-5300 667 Mhz.

  Help, please!

  I don't know Mr. but as far as I know the Satellite A200 - 1 K 7 has an Intel 943GML chipset that supports 2 GB max.
  So you should check which chipset you have. For this, you can use PC Wizard 2008 (http://www.cpuid.com/pcwizard.php).

  If you have a different chipset, I think that the modules are not compatible and if you need other modules.

• Satellite C660-108 does not start with 8 GB of RAM

  I bought 2 x 4 GB memory modules to upgrade memory up to 8 GB.
  With 8 GB installed, the laptop does not start, but he will start with 6 GB installed.
  Modules 4 GB 6 GB configuration and wood East of 1.8.

  Any ideas?

  Hello

  According to the manual, this laptop can be upgraded up to 8 GB of RAM.

  Then you should be able to use the 2 x 4 GB RAM modules

  I think that both modules are not compatible with each other and therefore cannot boot up the laptop.

  You should test the laptop with the help of other modules.

• Satellite C660-B080 - FN key does not work with Win 7

  Hello

  My laptop model is' satellite C660-B080 & only part no = 'PSC0SV-02G01JAR' with windows 7 Ultimate 64 bit SP1

  I downloaded the driver from the website, but the FN key does not

  Please help me with this.

  Thank you

  Must be installed:

  -Value Added Package for Windows 7 64 bit
  -Flash utility Cards with support for Windows 7 64 bit

  These two tools are located on the Toshiba driver pages.

• Satellite A660 - 11 M: does not start with 8 GB of RAM, but works with 6 GB

  Satellite A660 - 11 M:

  I upgraded my RAM to 4 GB (2x2gb) up to 8 GB (2x4gb). When I start the computer I can see in the BIOS it reads 8 GB of RAM. However, when starting, it does not go beyond the white screen BACK (just before Windows starts).

  If I delete one of the 4 GB & replace it with a 2 GB (so I have 6 GB total) it starts ok.

  Anyone know how I can get it to work with 8 GB of RAM?

  Hey,.

  To be honest, I've never heard of RAM SanMax modules...
  In my opinion the problem is related to your RAM modules is not compatible to your laptop or defective.

  You can test it with high-quality Kingston or prétestées authorized service modules?

• Satellite Pro A200 - does not start with 4 GB of RAM

  Hello

  I installed 2 x 2 GB, but it seems that it does not work. The funniest is that when current to run just a bunch of memory (2 GB so) it works, when you run both, it does not work and it freezes. This is the Samsung 2 GB 2Rx8 PC2 - 6400 s - 666 - 12 - E3

  Ive' installed the BIOS (64 bit v2.60) was last updated for the Satellite Pro A200 and I am running Windows 7 64 bit

  Hi caribman

  What Satellite Pro A200 you have exactly?

  I ask this question because some A200 models were equipped with chipsets 943GML and these models support 2 GB only!

• Aspire One D257-13404 does not start with 2 GB of RAM

  Already, it has 1 GB in there and works very well. However when I put this module, it simply won't start.

  This is the module that I put in.

  http://www.crucial.com/USA/en/ct25664bf160bj

  It tested fines in a Dell laptop, I have here.

  Any ideas?

  Hello

  I checked the part number of the memory module said:

  Sorry, this part is not compatible. view the compatible parts

  Aspire One D257-13404 check another system.

• Satellite A30 does not start with the USB device connected at boot time

  Hello

  I have a Satellite A30 and sometimes it does not start.
  After turning on, not even the BIOS starts.
  even if sometimes the BIOS starts, but the OS does not load.

  I figured out that its related to USB devices connected at boot time.
  If no USB devices are connected, it starts without a problem.
  Even if the start-up is suspended, as soon as you unplug start it BIOS USB devices.
  Its ok to connect USB devices later, once the system has started.
  I disabled "removable devices boot" and "network startup."
  just in case, but it makes no difference.

  BIOS is version the most recent (1.70) and it comes up with all kinds of USB devices.
  printer, mouse and (self-powered) external USB hard disk.

  Is this a known issue?
  There is no known workaround solution?

  Hello

  I put t know why this happens, but it has to do with the BIOS.
  The same thing happened on my old laptop. I couldn't start my unit while the USB printer has been turned on and connected.
  The only solution is to disconnect the external USB device during the boot process.

  RSY you should check if the order of boot in the BIOS has been on the HARD drive first.

• Satellite A200 PSAF3A does not start with 4 GB

  Hello

  I have a model A200 PSAF3A-0QH01N.
  I've been led to believe that it supports 4 GB of RAM but does not start with 4 GB, freezes at the toshiba logo.
  Also have A100 running new 4 GB RAM works very well in this machine. Have updated BIOS did not help.

  Any advice?

  According to THIS specification that your laptop can be upgraded up to 4 GB of RAM.

  Downstairs you can also find the part number of the compatible RAM. List of the memory modules are tested and working with your laptop.

  Where have you bought?

• Tecra A6 does not start with battery only

  Hi all
  I'm having a strange problem with a Tecra A6 I picked up recently at the refurb because it does not start with a battery only: it starts only when / sector is also connected, but eventually DΘmarrer on battery alone (and works fine) with the power cord removed shortly after pressing the power button. It's just on battery alone, I get no answer by pressing the power on button (so the power outlet must be set at this first stage or I don't get anything).

  Now I'm wondering if maybe it's the battery voltage? It seems that there are 2 options for this model, a 10.8 v and the other at 11.1V. With loaded Windows and Hardware Monitor reports running the battery is at 0% wear level and cool until completely (so I don't think that the battery is faulty), but it indicates that the battery is running at * 11, 1V, * but the battery installed is actually the * model 10.8v*. Could that prevent any power on only to batteries?

  More information on the model I have:
  Tecra A6-PTA60E-0EJ013EN
  CPU: Intel Core 2 Duo T7200 2.0 Ghz
  2 GB of Ram.

  Thanks in advance for any help on this one. Essential, I would like to know is if I have a 11.1V battery to run this model correctly (and get it) on battery alone. If the voltage makes no difference so I guess it must be a weird motherboard problem and I need bother not buy a new battery.

  > Will have to buy another battery and see if the same thing happens (I'll know then if it is the motherboard), but in the meantime if anyone can let me know if the voltage is serious I would appreciate it.

  To my knowledge, the batteries for Tecra A6 should take in charge 10.8V
  There's piles more strong for example 5200mAh but the voltage must be the same 10.8

• HP 250 g3: hp 250 g3 does not start with windows 8 ir says the GPT partition style

  HP 250 g3 does not start with windows 8, it is said GPT partition style and custom boot that I have fomarted the hard drive... Please help

  Thnx man always the same thing, but I deleted all partitions and then I was able to start...

• HPE-510 t does not start with AMD over-pants W5000 (Windows 8.1)

  I just bought an AMD over-pants W5000 (TDP = 75 W) to replace my nVidia Quadro 600 (= 40 W TDP) in my 2011 HPE-510 t (i7-2600, 12 GB of RAM). Dell U2913WM monitor.

  My machine does not start with the new inserted card. I upgraded a 450 W Antec VP450F 300W stock power, but that has not changed the start situation. I tried DisplayPort and Dual-Link DVI - D.

  Someone at - he was able to get the AMD over-pants working in an office of this generation HP?

  Thank you

  Mike

  Hello

  Open RUN (win + x key) and enter: MSINFO32

  What level of your PC BIOS runs?

  If you can not enter the BIOS at startup so be sure that your keyboard is plugged into a USB 2 port.  Otherwise some time in Windows 8 go to Advanced Options.  See the image below.

  

• Windows does not start with the second internal HDD connected

  Hi all, I recently got around a few major problems with a new buuild, but I found another issue. Windows does not start with my connected storage disk.

  hard drive 500 GB of important data that I can't save on it and need access. It is a hitachi drive, which works fine on other systems but usually works in this one. any suggestions are appreciated, thanks in advance

  fixed the problem of swapping of sata ports and reconnect the cables, thanks for the advice but

• Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool.  Any help would be appreciated?

  Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool.  Any help would be appreciated?

  Same fixed.  At executed license repair tool, Adobe - Adobe licensing repair tool, and it fixed the problem.

• Satellite A200-1 body weight does not start

  Hello

  I have a Toshiba Satellite A200-1BW model that frooze all to use and would not start again.
  I have checked all the power drive options very well.

  I have the blue AC power led on and the orange light but pc does nothing. I tried to power up without battery with AC, but always the same question.
  No fans don't come on etheir. PC won't in the start-up phase, and nothing appears on the screen that is constantly empty.

  I don't get the HDD 200 GB startng so I swapped it for a work of identical spare but the pc still does not start.

  My only conclusions are that I have a dead motherboard or a power problem internal.

  Its the real frist problem I've had with this laptop so am just checking to see if anyone out there has had the same problem or knows all the patches, I have not tried.

  Yes, that sounds like a serious hardware failure.
  Looks like the motherboard, GPU, or another party on the mobo may be defective.

  What about RAM modules? Did you check both?
  Please do

  Otherwise if there s no RAM issues then you will need a professional technician help.
  At the moment I put t see any other solution you :(