Satellite C660-2F7 - external display on TV via the VGA output

Similar Questions

• Satellite C660 - 115 WLan connection only works when the power cable is connected

  Hello

  A few weeks ago, I bought a Satellite C660-115. I want to surf the internet anywhere in my house without any son/cables.
  On the first day, I had this problem: when I disconnect _power_ cable, the wireless connection will stop working.

  The Web page on my screen will always be there, but a new page loading is a problem.
  It is sometimes useful to recharge (by pressing F5), - sometimes not. It is always useful to "ip address of repair", but not for long.

  The only solution is to atach regardless of how much power the battery has still the power cord.
  When I do, it is no problem whith the connection at all.
  I went back to the store where I bought it, they related to their own wireless network and they have had the same problem after a few minutes. In the shop too attach the power cable solved the problem.

  So the problem must be in my lap top, not in my network (modem or almost).

  Doesn't this all seem familiar, and if so, how can I solve this?

  I hope that my English is understandable, I live in Holland.
  Thanks in advance!

  Here is the solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59177

  Change options for saving for the Wlan in Windows 7 power management

• InDesign extension is not displayed when run via the option "Debug as".

  InDesign extension is not displayed when run via the option "Debug as".

  Hi all

  I worked on an application InDesign Extension for a few months now. I am Member creative cloud. I FlashBuilder 4.6 + Extension Builder 2.1 (both licensed versions) and InDesign CS6 and CC installed on my machine. The application is targeted for InDesign CS 5.x and 6 CS and CC versions. So far, I've tested it via "run as" and "Debug as" options of the FB; and in time, I "export as" ZXP for internal versions.

  I'm having two problems, do not know if they are related.

  1. when I try to bundle manifest, it fails with the following error: (at first, I thought it was an installation problem, but I did another test project and bundle manifest works on that one)

  Could not open the Editor: an unexpected exception was thrown.

  Details:

  java.lang.NullPointerException

  at com.adobe.cside.ui.editors.pages.MainBundlePage.isPointProductSupported (unknown Source)

  at com.adobe.cside.ui.editors.pages.MainBundlePage.createTargetAppSection (unknown Source)

  at com.adobe.cside.ui.editors.pages.MainBundlePage.createFormContent (unknown Source)

  to org.eclipse.ui.forms.editor.FormPage$ 1.run(FormPage.java:152)

  at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)

  at org.eclipse.ui.forms.editor.FormPage.createPartControl(FormPage.java:150)

  at org.eclipse.ui.forms.editor.FormEditor.pageChange(FormEditor.java:471)

  at com.adobe.cside.ui.editors.BundleManifestEditor.pageChange (unknown Source)

  at org.eclipse.ui.part.MultiPageEditorPart.setActivePage(MultiPageEditorPart.java:1067)

  at org.eclipse.ui.forms.editor.FormEditor.setActivePage(FormEditor.java:603)

  at org.eclipse.ui.part.MultiPageEditorPart.createPartControl(MultiPageEditorPart.java:352)

  at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:670)

  at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:465)

  at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:595)

  at org.eclipse.ui.internal.EditorReference.getEditor(EditorReference.java:289)

  at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2945)

  at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2850)

  to org.eclipse.ui.internal.WorkbenchPage.access$ 11 (WorkbenchPage.java:2842)

  to org.eclipse.ui.internal.WorkbenchPage$ 10.run(WorkbenchPage.java:2793)

  at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)

  at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2789)

  at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2773)

  at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2756)

  at com.adobe.cside.ui.popup.actions.CSIDEBundleEditorAction.run (unknown Source)

  at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251)

  at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection (ActionContributionI tem.java:584)

  to org.eclipse.jface.action.ActionContributionItem.access$ 2 (ActionContributionItem.java:501)

  to org.eclipse.jface.action.ActionContributionItem$ 5.handleEvent (ActionContributionItem.java:411)

  at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)

  at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)

  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)

  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)

  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1465)

  at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1270)

  at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3974)

  at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3613)

  at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2696)

  at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2660)

  to org.eclipse.ui.internal.Workbench.access$ 4 (Workbench.java:2494)

  to org.eclipse.ui.internal.Workbench$ 7.run(Workbench.java:674)

  at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)

  at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:667)

  at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)

  at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start (FlashBuilderApplication.ja goes: 108)

  at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)

  at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication (EclipseAppLau ncher.java:110)

  at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start (EclipseAppLauncher.jav one: 79)

  at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:344)

  at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:622)

  at org.eclipse.equinox.launcher.Main.basicRun(Main.java:577)

  at org.eclipse.equinox.launcher.Main.run(Main.java:1410)

  Here is my manifest file:

  <? XML version = "1.0" encoding = "UTF-8"? >

  < ExtensionManifest Version = "2.0" ExtensionBundleId = "ConnectXPress".

  " ExtensionBundleVersion ="1.0.0"xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance ">

  < author >

  <! [CDATA [Swati Sisodia]] >

  < / author >

  < ExtensionList >

  < extension Id = "com.pubpress.CXP.extension1" Version = "1.0" / > "

  < / ExtensionList >

  < ExecutionEnvironment >

  < parameter Listehotes >

  < host name = "IDSN" Version = "7.0" / >

  < host name = "Clement POUPARD" Version = "7.0" / >

  < / parameter Listehotes >

  < LocaleList >

  < Locale code = 'All' / >

  < / LocaleList >

  < RequiredRuntimeList >

  < RequiredRuntime Name = "CSXS" Version = "2.0" / >

  < / RequiredRuntimeList >

  < / ExecutionEnvironment >

  < DispatchInfoList >

  < Id = "com.pubpress.CXP.extension1 extension" >

  < DispatchInfo >

  < resources >

  < SwfPath >./ConnectXPress.swf < / SwfPath >

  < / resource >

  life cycle of the <>

  < AutoVisible > true < / AutoVisible >

  < / life cycle >

  < UI >

  Panel < type > < / Type >

  ConnectXPress < menu > < / Menu >

  < geometry >

  < size >

  < height > 520 < / height >

  < width > 350 < / width >

  < / size >

  < / geometry >

  < icons >

  < Type icon = 'Normal' >./icons/normal_icon.png < / icon >

  < Type icon = "RollOver" >./icons/rollover_icon.png < / icon >

  < Type icon = "Disabled" >./icons/disabled_icon.png < / icon >

  < Type icon = "DarkNormal" >./icons/dark_icon.png < / icon >

  < Type icon = "DarkRollOver" >./icons/dark_icon.png < / icon >

  < / icons >

  < /UI >

  < / DispatchInfo >

  < / extension >

  < / DispatchInfoList >

  < / ExtensionManifest >

  2. my other problem is, I recently changed the name of the project and the name of the application in the Menu, and since I did that, my extension is not displayed when I perform "run as" or "Debug as" Flash Builder. To enforce as / debug as, the code compiles and appears in the folder "bin-debug", the application is triggered, but when I navigate to Windows > Extensions, my extension is not present here. Although when I export as ZXP and install via Extension Manager CS 6 or CC, it shows my last extension in Windows > Extensions with the correct name.

  Any help is very appreciated. Please let me know if I need to provide more information.

  Kind regards

  Swati.

  I've solved both of my problems. And I thought I'll post for others.

  First problem, where the manifest failed Bundle of FlashBuilder, was resolved by a change in the manifest.xml (who lives at /.staged-extension/CSXS). The change I made was tag. Earlier it was (generated by FlashBuilder 4.5):

  I changed it to:

  I did a bit of hit and trial and it seems that FlashBuilder generated 4.5 tag host with the Version with only the specialties of the minimum version while FlashBuilder 4.6 requires that all versions of specialties listed in the Version attribute.

  The second problem of debug/run as not to install the extension properly in InDesign, has been set as a result of the software update of FlashBuilder.

  This is what brought me to do:

  I retraced my steps and realized last thing I did before the "Debug as Adobe InDesign Extension" of in FlashBuilder broke on my machine has been updated InDesign CS6 to the latest available version, which probably ended up with flash/flex versions of InDesign and FlashBuilder. Therefore, perform a fixed update debugging.

• Connect external monitor via the VGA port &gt; &gt; BSOD

  Hi all

  I have a laptop Acer Aspire V3-772 and I had an (obvious) problem. When I connect an externel to my VGA port my laptop freezes. After that I restarted my laptop (still connected to the monitor via the VGA input) I get the following BSOD:

  video_tdr_failure igdkmd64.sys

  This error I've read on the internet has nothing to do with the video card intel. On this laptop, there intel 4600 internal videocard. There is also a second video card which is geforce gtx 760 m.

  I updated my system completely and everything works fine. Except the VGA port.

  I tested my HDMI port that works correctly, open the same screen/monitor connected via the VGA input it freezes / BSOD.

  One give me advice on what could be the cause?

  is this hardware or software really? I think that the software. In any case I'll try to install the older version of the video card driver intel. I'll post if it works.

  I would like to have some advice on this issue.

  Thank you!

  Thanks for your reply. I tried already. HDMI works very well but even VGA displayport monitor (so double male vga cable) causes system hang still > BSOD.

  I did a factory reset. Same result.

  Conclusion... Its a hardware problem.
  I'll contact support so they can pick up my laptop for repair.
  I lost my weekend for this problem.

  I'll change this topic as resolved since it's associated mobo (intel grappics card).

• Media Center supports Toshiba 5.1 via the optical output?

  Hello, I have a question before you buy it...

  Media Center supports Toshiba 5.1 via the optical output?
  I find no matter where they mention only the digital output, but that might coax.

  Can anyone of you help me?

  Thank you

  Hello

  As far as I know the Toshiba Media Center supports these features:

  Dolby Digital Surround, Dolby Digital 5.1, EAX ADVANCED HD

  _Ports: _
  1 x Ethernet - RJ45
  4 x hi-speed USB - USB type A, 4-pole
  1 x audio * SPDIF out *.
  1 x audio - line stereo 3.5 mm port
  1 x headphone output stereo audio 3.5 mm port

  Big names

• When I connect my laptop to my TV via the "vga" cable, the color red does not appear on the TV screen.

  Color problem

  When I connect my laptop to my TV via the "vga" cable, the color red does not appear on the TV screen.

  Problem with the video card, cable or tv.  I will try to update the video driver first.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Satellite P750 - unable to connect an external display via the VGA port

  Hi all

  My problem is the following:

  I tried to connect my P750 (running on W7 x-64) an external display using the VGA cable port. Unfortunately, these devices recognize my phone. Laptop does not recognize the external display, you can see in the graphics settings as additional display, but the screen shows "no signal".

  The computer always identifies the screen correctly, so it seems that there is communication from the screen to the PC, but not the reverse.

  This has been verified with 3 separate screens and television - still the same. All the screens work properly with the other PC.

  I already have:

  -try to play with FN + F5 / "windows" + buttons P - no change
  -install the latest drivers BIOS and video site Web from Toshiba - no change

  Suggestions how to operate? Is it possible that the VGA port is faulty?

  Thank you in advance.

  Hello

  You have the same problems with a HDMI output port?
  Usually, you don't need to change anything to get the external monitor works.
  Press Fn + F5 several times until the monitor RGB (VGA) was selected
  Since you can choose an HDMI output too, you should pay attention to this option.

  Have you tried to change the resolution before using the Fn + F5?
  It s worth a try

  Last but not least, you could set the default BIOS (press F9 BIOS and save the changes by pressing F10). But I don't very well if the BIOS contains some parameters of port RGB (VGA) m

• Satellite A300-202 - external display turned a strange color

  Hello

  I have a Satellite A300-202 with an ATI Mobility Radeon HD 3650 card and after upgrading vista to windows 7, my external screen turned a strange color, seems to lose the color red. Never see white color, which should show the white color of the Blue Watch.

  I uninstalled and installed again the graphic card drivers and update the new drivers but don t solved this problem. My external monitor it of ok because I tried with the other laptop and don't have this problem. I also tried my laptop with any other monitor and have the same problem.

  Someone already had this problem, someone who can help me?

  Thank you

  Hi Zagga,

  This means that this only happens on your external monitor or internal monitor too?

  You wrote on the new installation of display drivers so that the drivers that you have installed exactly? You should only take on the official website of Toshiba display drivers as they are pre-tested.
  Check this box!

  Also, make sure that this latest version of the BIOS is installed.

• Satellite C660 - installation VAP displays error 0x80C70220

  Toshiba Satellite C660 - 162 (PSCSE), Windows 7 Professional 32 bit, Value Added Package 1.3.19

  Well, I just my laptop format and not the function piece works for me. I tried to install PVAT but I get this "error 0x80C70220".

  Advice please!

  Hey Buddy,

  You have installed all the drivers for your laptop? Driver missing like chipset or else can cause this error.

  Also install the package of value added as an administrator. With a user without administrator rights account will not help you. Last but not least unzip all files before starting the installation.

  Check this box!

• Cannot display the HD-DVD on an external monitor via the vga input

  Help, please

  I have updated me factor embedded hd-dvd player, I've also updated the audio driver realtek for vist but for the life of me I can't get a hd dvd to play on my projector via a vga cable.

  Any suggestions would be most kind
  Thank you
  Pat

  What model of laptop do you have?
  Has your computer laptop HDMI port?

  VGA port is not one that suits what you want to do.

• Satellite C660-1CQ - graphics pretty tense horizantally after the installation of Win10

  I have a laptop Satellite C660-1CQ.

  After that I have upgraded to windows 10, screen, icons, wallpapers are stretched horizontally. (Looks the same as the graphics in safe mode). I use it in normal mode, but everything is still as safe mode. everything works well but the computer completely resembles the safe mode.

  And the computer seems a little slow now and fan started making noises.

  I think that your model of laptop is not supported for Win10, so it is possible that you will be faced with some problems. Can you change display resolution?

• Satellite A660 - 11 m display is safe for the eyes?

  If any body know of course if the screen of the trunk Satellite A660 - 11 m for the eye because I have heard this eye turn red for a long time remain on the monitor
  If any body know about the safety of the monitor answer me & thank you

  > If any body know of course if the screen of the trunk Satellite A660 - 11 m for the eye because I have heard this eye turn red for a long time remain on the monitor

  :) Look, man

  Each screen (TV, LCD, TFT, portable computers display, external display, etc.) that may affect your eyes if you would not follow the rules recommended by the manufacturers and specialist eye ;)

  You should take a break between sessions of computer work and games.
  You must keep the distance to the screen and remember that your environment is bright enough

  Read the operating instructions and ask your eye specialist how to avoid red-eye ;)

• Satellite C660-1NW - Webcam does not work with the facebook chat

  Hello

  My doughter recently bought a Satellite C660-1NW youcef.
  This laptop has a webcam on board.
  When you use Facebook, webcam chat, webcam does not work.
  The webcam indicator led is active come on, but the facebook app remains blue without screen webcam.
  Audio works.

  Skype using the webcam works.

  I have updated the drivers but when same no go :(

  Please help move facebook webcam

  Greetings,
  PP

  Hello
  If Facebook does not recognize your webcam right away when you want to share a video, click on the eye for cameras new button.

  Your Adobe Flash Player settings will be displayed.
  On the tab, make sure you only select the right type of camera you use with your computer.

  On the tab, you may also need to 'allow' Facebook to access your camera and microphone.

  If your settings does not work, try to uninstall Adobe Flash Player on your computer and download the latest Flash Player.

• Satellite A200 - interfacing with Sky HD box, via the i.Link on my laptop.

  Satellite A200-1VP

  I'm trying to find away to check my laptop DVD, my disk drive hard SKY HD boxes, so I can copy the recorded programs from the HDD to DVD discs from the sky.

  But don't have a HDMI interface port, only the AVI & output VGA, which does not have a digital input, only the other signal output as we understand it.

  So I thought to using the port i.Link (IEEE 1394-a), as it was designed to send DVD date camcorder to the laptop to be registered? wouldn't the camcorder DVD send a digital signal, and if this is the case, shouldn't it work this way? Is there a device or cable on the market that I could use to make the possible interface to do this?

  I have watched cable, through the Internet but can't seem to find a HDMI / i.Link (IEEE 1394-a) lacking USB i.Link (IEEE 1394-a), but seem to be under the impression that the USB 2 is unable to deliver the date at a fast enough speed to make it work...

  Any ideas would help thanks.

  Why don't you talk with your local dealer and experts for this?
  If you do not have matching port on your laptop, you need another external solution.

  Check http://www.pinnaclesys.com/PublicSite/uk/Home/ and all products here.

• Satellite C660-28 d - problem "Load driver" with the new HARD drive

  I have a Toshiba Satellite C660-28 t.

  The hard drive has failed. I called Toshiba Support who send me a replacement.

  However in the meantime I was going to put in my spare hard drive and do a fresh install of another operating system that I have a spare for (Win 7) key.

  However, I can't past the screen "Loading Drivers" as the laptop came with driver disks.
  I can't find the drivers on the Toshiba site (I tried some drivers intel which I thought were good, but he says they were not signed and all comes down to the loading screen drivers).

  I have made the recovery discs, but obviously can not use them on the new hard drive as it doesn't have the recovery partition.

  Any ideas on where I can get the proper drivers from?

  Thank you

  > I made the recovery discs, but obviously can not use them on the new hard drive as it doesn't have the recovery partition.

  If you have a recovery disk using Toshiba preinstalled recovery media creator tool, you just have to boot from that disk to begin the installation.

  More info: all the recovery disk for Toshiba Europe, models of laptops can be ordered here:
  http://backupmedia.Toshiba.EU/landing.aspx