Satellite C660 - cannot start the facial recognition software

When I try to run face recognition software I get a window saying to contact my administrator - I have the status of administration on the Satellite C660 laptop.

Research forum that I found did not help in any time I try and follow the advice, I still get the same message. The laptop is new.

Hello

I think that this tool is confusing upward in some way. Therefore, the first thing that should be judged is a new software installation. I recommend you to uninstall this tool first.
You can do it is Panel-> software

After the uninstall, it would be recommended to clean the registry. This can be done by using a software like CCleaner.
After that, download Toshiba face recognition software pilot European page and install again.

Good luck

Tags: Toshiba

Similar Questions

  • Satellite T130 - cannot start the Toshiba HDD recovery

    Hi all, I have a problem with my Satellite T130. I have to start the drive HARD Toshiba recovery but the computer tell me that is not a valid drive HARD recovery on the PC. It's probably a fault of my father. Is there another way to start the recovery?

    Thank you

    Hey Buddy,

    How are you trying to start the HARD drive recovery process?

    The full HARD drive recovery procedure is described here, so please check this article:
    http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

    If it doesn't work your only option, you use the recovery media. Did you create this such as described in the user manual?

  • Cannot start the HP printing software (HP OfficeJet Pro 8500 A910a)

    Hello

    When I double-click the icon of the HP software on my desktop behavior strange results. Nothing opens and my computer behaves erratically. After a while I get the following error messages:

    instancefinderdlg.exe

    werfault.exe

    Then after that - my computer restarts so all by himself. But not a complete reboot - it just goes back to the initial logon screen and I get my password from Windows and displays the desktop.

    I am running Windows Pro 8.1 (64-bit). The printer is set to work wireless.

    After doubleclicking on the HP software icon and wait for the software to open, as I mentioned above, one thing I tried was a ctrl-alt-del and open Task Manager. I checked the services running, and there were multiple instances of a service life of HP (I not only remember the name but there seems to be dozens of the same HP service running).

    I also completely uninstalled all HP software use Revo Uninstaller and then reinstalled the software / driver for the OfficeJet Pro 8500 A910a - but this package did not make a difference; exactly the same problem occurred again.

    It happened only in recent days. Before that, I could double-click the HP software icon and open normally and I was able to check the settings, ink levels, etc. Interestingly, the printer seems to always work well - I can print in Word, print photos from Lightroom, etc. Just, I can't open my desktop HP printing software.

    Any help would be greatly appreciated. Thank you!

    Hi jedasa,

    I guess you can start to feel frustrated. I did some additional research and would like to try a few things. I want to delete the printer Assistant icon, open devices and printers, right-click on your printer and choose open. In the window that opens, please right-click on the Printer Wizard and click on create a shortcut. Now we can go to the desktop and see if it will be open from there. The icon will now by HP in a blue circle and say HP Printer Wizard below (see image below).  If it opens and works, we use this going forward, but if it does not continue with the steps below.

    1. Hold down the Windows Logo key ( ) on the keyboard and the 'R' to open the dialog box run, type %temp%
    2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
    3. Unplug the USB cable (if connected), open programs and features, click Editor (all HP software will be together now) and uninstall all software associated with the printer. You fill find the basic driver, study for improvement of the product, HP Officejet 8500 help. Be sure to do not uninstall other HP software, especially if your computer is a HP computer. I generally use the date as a reference. Printing software would have all been installed on the same date.
    4. Once the uninstall is complete, reboot the computer
    5. Follow these steps to reset the registry settings and options for Windows Installer.
  • 1F1 Saellite C660 - cannot start the machine?

    Ive had machine about 6 months. Tempted to put on yesterday, it seems to start as usual, the Toshiba screen flashes up (where he mentions F 2 and F12 for menus) and then the screen goes all white and nothing happens. Forgive me, I'm a novice and struggling to find what to do. Can anyone offer advice please?

    Hello

    You can access the BIOS?
    Immediately after the laptop has been powered, press F2.
    In the BIOS, please check if the HARD drive is listed and recognized.
    If the HARD drive is not listed, this means that the HARD drive is not recognized by the BIOS, and that means that it s faulty.

    You can also check if you can run HARD drive recovery.
    Switch on the device, press F8, and then select Repair my computer, then choose disk HARD recovery. This would reinstall the OS and fix the laptop back to factory settings.

  • Satellite L735 - cannot start the backup of HARD drive

    Hello

    I want to buy a new HDD in my laptop a L735. Before doing this, but I need to back up the windows installation files. Whenever I try to do a backup, but it does not allow me and a message appears on the screen saying that it is not possible. Here's a screenshot of it:

    http://img694.imageshack.us/img694/7088/screennv.PNG

    Could someone help me with this please?

    Kind regards
    Darren

    >... I need to back up the windows installation files
    What you try to do is not the Windows installation files back up but the creation of recovery disks.
    For some reason of original Toshiba recovery image cannot be found or detected on the HARD drive. I don t know what that you did, but it can happen if hidden recovery partition is deleted or partition structure has been changed.

    Do you have more questions?

  • FastAccess facial recognition software uninstall

    I recently bought an Inspiron 17 "/Win8 which came with FastAccess facial recognition software installed.

    FastAccess turned ON the camera (and directed) and does not allow me to monitor turned or fine tune when he was allowed to start using the camera (and the resources of the system). So after a few emails with the support of the SensibleVision and find the version the most recent was faster and better recommended - they wanted an upsell - I uninstalled it through Control Panel. It is that fast - easier to type a password only to have to smile at the camera and wait.

    However, still there seems to be a few pieces of it around that I never tracked.

    Now this morning, all of a sudden FastAccess appears and wants to be trained on my face again. It seems that Dell digital delivery has downloaded again. I go to the digital distribution of Dell and it does not remove FastAccess and some other selling points. So I uninstalled Dell digital delivery as well.

    In any other place, something that is to settle and be boring is called a virus.

    Did I miss anything else I want to uninstall it to get rid of this "viral" software

    It's horrible.  I never regret buying a Dell!  It worked for a while, but now my digital delivery has yet once installed FastAccess on my computer.  I really hate this software on my computer and I think I'll never by another Dell product and never any "Sensitive Vision" software!  Please, please, please someone help me find a way to remove this program permanently so I mustn't shake the roof!

  • My windows firewall does not illuminate. Windows cannot start the Windows firewall Service ICS.

    How can I solve unless I need to have this problem to download protection software.

    Hi Octavia10,
     
    -What version of service pack of Windows XP you are using?
     
    Try the methods listed in the given article to resolve this problem:
     
    Note: The steps are applicable to the other version of Windows XP as well.
  • The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    original title: The Audio service is not running windows vista

    Hello

    I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    I saw it in Event Viewer

    The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

    Thank you

    -Majid

    original title: The Audio service is not running windows vista

    Hello

    I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    I saw it in Event Viewer

    The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

    Thank you

    -Majid

    These error messages are a pain in the neck to extract useful information.

    I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

    If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

    Realtek and NVIDIA, for example get stuff good free audio driver.

    If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

  • Sims3-message-cannot start the game 0x039e8474 service initialization error

    someone recently put the sims 3 on my computer it's a game hacked, it worked fine on his computer, but it is not functional on mine me repeat it, cannot start the game 0x039e8474 service initialization error

    [Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs]

    Hello

    Probably that's due to the custom being contained in the game which is not compatible with your current version. It can also occur when your cache has not been cleared of a previous installation or game save and damaged.

    I suggest you follow the steps mentioned in this article about this.

    http://Forum.thesims3.com/JForum/posts/list/561267.page

    Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

    If the problem persists, you can post the question in the Sims3 community forums.

     
     
    Hope this information helps. Response with status so that we can help you.
  • DV6 there password to facial recognition software and toolbar HP advisor?

    I have a HPdv6 3250us notebook computer with Windows 7 and I just read http://h20331.www2.hp.com/hpsub/downloads/Face_Recognition-_Tech_Spotlight.pdf on software for facial recognition, which can be used to connect to Web sites instead of a password. While my HP came with simplepass identity protection figerprint hardware and software scanning, I would play with this option of facial recognition... BUT I can't find it on my machine. Maybe is not installed on my laptop because of this because the reader of fingerprints, IDK.

    Is it here somewhere? The PDF said find in the "HP Advisor Toolbar', but I apparently don't have to be!

    I should have this toolbar in my taskbar as it says that all new HP laptops are equipped? Or is this sentence wrong?
    Bottom line;

    My HP dv6 3250us there password facial recognition software?
    AND
    My model also has this HP advisor Toolbar somewhere, and I'm not?

    Please indicate where it is, or why I don't have the latter, thank you.

    Perry Florida

    Your HP dv6-3250us doesn't have / are delivered with a facial recognition software installed.

    The same PDF that shows in your answer clearly indicates that this feature is only available for professional laptops HP and not on any portable consumer like yours.

  • Cannot start the unit because the authorization service is not running - cannot start service

    I'm weirded out. When I try to start the unit on my VM, I get the following message:

    The Virtual Machine cannot be set to Unity mode because:
    -The VMWare authorization Service is not running.

    So, after a little checking, I realize that indeed, the authorization Service is not running on my host. I am trying to launch and get the following message (translated from the french, sorry):

    Windows cannot start the VMWare authorization on your local server. For more information, see Event Viewer. If this isn't a Microsoft service, contact your service provider indicating the service specific error code: 6000002.

    Event Viewer is a little more detailed... But not really useful:

    Unable to retrieve the token for the user to VMware: unknown error 1385 (0 x 569) (1385)

    NONE of these error messages to display more than a few visits on Google, especially not in exact search (with quotes around the exact phrase) mode. I'm at a loss as to what I can operate the unit.

    Technical details:

    Host: Windows XP SP3 (French)

    Dell Optiplex 760, Intel Core 2 Duo E8600 @ 3.33 GHz. 3 GB of Ram.

    VMWare: 7.0.0 build-203739

    Client: Windows XP SP3 (English)

    I have attached my log of vmware just in case. Will be extremely grateful for any help!

    Thank you!

    The only other thing I can think is a reinstallation of the vmx86 service. Rerun the batch previously posted like this, with the extreme detail;

    Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 36

    "%programfiles%\vmware\vmware workstation\vnetlib.exe" - stop vmx86

    "%programfiles%\vmware\vmware workstation\vnetlib.exe" - uninstall vmx86

    "%programfiles%\vmware\vmware workstation\vnetlib.exe" - install vmx86

    "%programfiles%\vmware\vmware workstation\vnetlib.exe" - beginning vmx86

    Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 3

    and repeat once more for authd thereafter;

    Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 36

    "%programfiles%\vmware\vmware workstation\vnetlib.exe" - stop authd

    "%programfiles%\vmware\vmware workstation\vnetlib.exe" - uninstall authd

    "%programfiles%\vmware\vmware workstation\vnetlib.exe" - install authd

    "%programfiles%\vmware\vmware workstation\vnetlib.exe" - beginning authd

    Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 3

    If this does not help I suggest you reinstall workstation completely from your own account. Don't forget to note your serial number if your IT Department has already given it you.

    Joakim

    BTW, it might be that your group policy to prevent something. Check with your IT, if others have the same problem.

  • PROTECTED 2010 cannot start the Slimline Combo drive

    Hello

    I have two Portege 2010 with two different Slimline Combo drive for Cardbus cable - no two computers are able to start readers Slimline Combo. Two computers with each different drive have been works perfectly in early September, but none now.

    A computer does not recognize the drive of all - the other answer in the hardware profile, it cannot start the drive.

    Both computers are running Windows XP 2nd edition.

    ????

    Thank you

    Best regards
    Anne Mette Voss

    Hello

    Do you mean that the external CD/DVD drive for PC card cannot be recognized in Windows XP?
    Hmm I think I have an idea.
    I think you should go to the Device Manager and remove the * Texas Instruments PCI controller card bus * and * Toshiba ToPIC100 CardBus controller *.
    Reboot the laptop.

    After restarting, the operating system must install new hardware (two controllers carbs) and after this installation, you can try to connect the external PC card, CD/DVD drives again!

    Good luck

  • Cannot start the DSC Shared Memory

    I'm under LabView 7.0 (I know its an older configuration), with DSC and Lookout CPB to make periodic communications to an Omron plc. I needed to update the nor-DAQ because the PCI-6220 card needs the driver. I upgraded to NOR-DAQ 7.5 and now a get the cannot start the Service Manager memory shared DSC. I uninstalled the DSC and reinstalled without change. I found in discussion forums that I need nidscsm.exe in the windows\system32 folder, but is not there. I am running Windows XP.

    I have 2 configurations like that. 1 PC always connects to the controller even if the error appears, another PC connects any, lights flash but error timeout then comms.

    Thank you!

    Sorry, maybe I had my names wrong. He was DAQ - Mx that I've upgraded to v.8.1 and that's where it messes up the communications of the OPC. I knew that if I install the DAQ - Mx without option checked OPC she always clears the NIDSCSM.COM as a service, but I can still use serial OPC communication. Strange...

  • Halo 2 for windows vista does not work on my windows 7. Saiys it cannot start the direct customer

    original title: Halo 2 for windows vista

    Halo 2 for windows vista does not work on my windows 7.  Saiys it cannot start the direct customer.  It will not work in single user either...

    Hello

    Plase make sure you have the latest version of the GFWL Client installed:

    http://www.Microsoft.com/games/en-us/live/pages/livemarketplace.aspx

  • Cannot start the network connection: invalid access to memory location

    Hi team,

    Windows 2003 SP2 cannot start the network connection. Error connections network service terminated with the following error: invalid access to memory location.  Can you help me on this issue?

    Thank you

    Sangaré

    Hello

    Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server 2003 Forum. You can follow the link to your question:

    http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads

Maybe you are looking for