Satellite C660 - green light comes on but no display

Similar Questions

• Equium L10-273: fan of CPU/HDD / lights come on but nothing on the screen

  I have an Equium L10-273 and had to put in a new power outlet in the mobo.
  I removed the wide and electronics. A friend of my put news on that to get back together.

  It sounds if the HARD disc / CPU fan / lights come on but nothing on the screen.
  Have unplugged the cable from the screen and he recovered but not good.

  Any suggestions welcome

  PS: A mobo out on a Toshiba Equium A60-155 will be mine?

  To me, this looks like a motherboard problem.
  In my view, replace the whole motherboard.
  But it s only my personal suggestion, if you want to be 100% sure what's exactly wrong with you laptop, then go you and technician of the notebook check.

  PS: Don't think that a card mother Equium A60 - 155 to insert in the notebook Equium L10-273.

  Greetings

• Satellite C660 - recovery partition is there but can I make backup discs?

  Hi all

  Just a query
  My GF turned on his PC series portable Satellite C660 and it would not start, we have tried to open the restore from the recovery partition sequence but kept getting the error that progresses at the start (error said to a device USB has been disconnected).

  As you probably guessed that she never did the backup disks when you are prompted, everything I could think of used a drive to win 7 and reload this way then try to make recovery disks after (I didn't activate)
  so win 7 has been installed well and all the drivers of origin that was all last week.
  Now to the crunchiness, the recovery partition is here now, I do the recovery disks and install from those, win 7 I installed it will soon take activation
  Any ideas?
  Thanks in advance

  After clean install of OS you can't create more recovery disk and you cannot install recovery image using the disk HARD recovery option (F8 at startup).

  Best thing you can do now is drive original order of Toshiba and use it for recovery image installation. It is certainly easier to have factory again.
  You can order it on https://backupmedia.toshiba.eu/landing.aspx

• Satellite A - power light turns on but nothing happens

  The laptop does not start. The power light turns on but nothing happens. Before that, error message 0 x 0. has been posted.

  Can anyone suggest what to do?

  Hello!

  It sounds like a hardware malfunction...

  Try this workaround: remove the battery and the AC adapter. Wait one hour and then reconnect the battery and the AC adapter. Now, try to restart the laptop.

  I put t know what laptop you have exactly but if it doesn t work you should go to an authorized service provider. Technicians can check your laptop.

  Good bye

• Satellite C660 - keyboard does not work but the Num and caps lock shift are on

  I have a Satellite C660 which was working fine this morning. When I came home from work and he turned, the keyboard does not work and therefore can not enter my login information.
  The Num and caps lock shift are turned on.

  Any ideas on how to solve this problem?

  Hello

  You are able to disable the CapsLock and NumLock?
  You can access the BIOS by pressing F2 by turning on the device?

  If this does not work, I would recommend checking an external USB keyboard.
  If the USB keyboard would be functions, then this means that the internal keyboard is defective and must be replaced.

• What he average when the green light comes on briefly when it is plugged and them goes out?

  I just bought the webcam connected and the Green led lights up and then goes away.

  Hi, Lord of the Manor,

  EDIT: Seen the following in response, I guess I should have asked, works the webcam otherwise OK?  Is that the only issue that light?  If so, then I would argue that it doesn't really mean anything and it would not be concerned about it.  I assumed, and the rest of this guess, the webcam is not working and it is one of the symptoms.

  What is the manufacturer, the brand and model of the webcam?  How did you install it or did you just plug it and expect it to work automatically (maybe it's a plug-and-play USB)?

  Are you sure that the webcam is compatible with your version of Vista?  Look at: http://www.microsoft.com/windows/compatibility/windows-vista/default.aspx.

  Make sure that the appropriate software/firmware or drivers are installed for the webcam.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  Search for one or more connected to the webcam and confirm that they are operable and functioning properly.  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should get those for the webcam to all least, even if Device Manager indicates that they work - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.  If there is any software or firmware as well (from the website), make sure that you install that as well in the order defined by the instructions (sometimes the order of the questions includinding if or not it is done while the device is plugged in or not).  The site may also include installation guides and/or the user manuals that can explain the purpose of the light and what it means when it is on or off and how to turn it on if it should be on to operate.  It is very difficult to help without details on the webcam as each works differently.  Actually, I don't even know if that's a mouthful in by USB to firewire or else however.

  I think it is unlikely that it came with no software, firmware, or drivers of any kind (mine did).  After plug in and do all the installations are required, go to start / Control Panel and see if there is a new icon for the Webcam and if so, click on it and try to configure it to work with your system by following the instructions.  If not, then click on start / all programs and check if there are no new software installed that associated with the webcam and if so, click it and follow the instructions to set up.

  I hope this helps.  If not, post back with detailed information (enough so that we can find the manufacturer and the specific webcam online) on the webcam and we will try to help you further in the establishment knowing that additional information.

  Good luck!

• Satellite C660 - D partition is full, but I only use the C partition

  I get a message that hard drive, D drive is full, but I don't use that drive C. I thought D was for elements of recovery. How can I decide what elements should not be in d and how how to decide what to delete/move?

  > I thought that D was for elements of recovery
  This isn't 100% correct.
  Of course, Toshiba Recovery files are placed in the folder of recovery on the D partition, BUT this does not mean that you cannot store other files on that partition.
  You can.

  >. How can I decide what elements should not be in D
  Before saving the files on the HARD disk, you will be asked for the place. You can always decide where these files should be stored.

  > and how to decide what to delete/move?
  It s your own decision to tell what files you want to move / delete.
  If you don't care about t of some files and some files are not important for you, you could remove it.

  I always install my programs on the system C partition. But the independent files such as music (mp3 files), images (jpeg, jpg, etc...) I always record on another partition

• HP DESKTOP Workstation - fort Fan - 420Z sees power light come on but does not start

  My workstation HP420Z worked well until it didn't. When I start now all I get is a sound whirring after about a minute or two.

  I have a clean machine (no dust)

  I tried reinstalling all the cables,

  Remove and replace memory

  Replace battery remove

  Reset the CMOS

  Reinstalling the video card

  Remove the USB cable and see if any change in the symptoms

  Computer is HP factory refurb just more than a year (380 days)

  Was going to buy a PSU and see if it is the problem, but I live in a remote area with limited access to the post office or UPS.

  Any suggestions on what I could check?

  RESOLVED - NO MOTHERBOARD

  AND I see that this problem came with others.

  I had 8 sticks of memory and found that one of them was bad.

  Strange thing is that in memory last questions always gave me a beep

  start up. AND while that memory seemed ok on Ramtest

  I took all the sticks and add them one at a time.

  Only one of them would cause the machine to not start and loud snoring.

  Works well with less memory of 2 GB. (Memory has been installed at the factory of HP - 380 days)

• Satellite C660-1J2 - change the color of the display

  Hello

  hope someone can help me it's new computer, a splash screen came to say that the color of the screen is set to high, and which uses the power of the processor, or you can configure it to fall or not to see this screen and you can change the effects.

  Have been, or how I can get this back to change the setting?

  If all goes well, might be kind enough to put me in the right sector

  Thanks in advance

  Tony Miller

  Hi milleras,

  Sorry, but that just confused s really tell you the color of the screen and not the brightness of the screen? You can post a screenshot of this message?
  What operating system you have?

  The brightness of the screen, you can change with the key FN + F6 and FN + F7 combination, but it has nothing to do with the color of the display.

• The problem of Satellite C660-1F1

  My satellite C660-1F1 has load problems.

  It started with the yellow light flashing one a message "plugged in don't not load" it is now completely out of charge and fires almost every time that I try to start.

  If I remove the battery and use just electric 2 green lights come on but it cuts during the boot process too.

  Anyone got any ideas?

  Hello

  Hmm... looks a bit like a motherboard problem.
  I think that the adapter is OK because the power led is lit if you plug the laptop on the sector...
  I'm not thinkt that the issue could be related to battery failure because if the battery would be affected, then the laptop must always run connected to the power adapter (in mains mode).

  So, it seems that the problem may be caused by dysfunction of the motherboard...

  A question: is your BIOS up-to-date?

• LaserJet Professional P 1102w printer green light blinking, but will not be printed

  I had my P of professional LaserJet 1102w for a little less than a year.  I use it very rarely and very slightly (I've probably printed total less than 25 pages).  It has always worked well.

  But in the last 2 weeks, it stopped printing.  The Green led comes on, but it will not be printed.

  I went through the troubleshooting diagnostic tests on my computer (HP Pavilion, Windows 7 operating system).  The result shows that my computer detects a problem, but it cannot identify it (for example, no paper jam, no toner, etc..).  I manually checked it for a paper jam too.  I have not seen any problems.  I turned off, unplugged, he turned his back.  She still does not print.  And now the green light blinks, even if I turn it off several hours ago.

  Help, please.  Thank you.

  Update: I realized what it was.  My USB cable was very slightly loose.  I don't see when I checked manually the printer the first time.  But I checked a second time and just pushed him tighter.  Problem solved.

• Sony vio eye movement showing do not fire green image comes on top of eye movement but no image

  Sony motion eye comes don't not on she said work but had no picture, I have a sony vio vgn-ns30e green light turns on but no picture

  Review the help/faq on the support pages of sony for your model, or their forums. Its their hardware & Software

• Satellite C660-2EL - Wireless n and the F8 function key does not show

  Satellite C660-2EL - Wireless works sometimes, but mostly not. Wired connection is ok. When does not not Fn 8 does not appear and the wireless card does not appear in the devices.
  Pilot was handed in place.

  Have tried reset default and many other things - yesterday was working - light today and not...

  Help!

  Hello

  If the wireless network adapter does not work or its lack in the device, the FN + F8 key combination Manager would not work.
  So the problem is your wireless network card.

  The WLan card driver is missing or malfunctioning of the WiFi chip.
  The device uses the Realtek RTL8188CE WLan card.
  Have you installed the chip RTL8188CE WLan driver?
  Make sure what you've done!

  Otherwise, if the WLan card is not listed in the Manager (no unknown device or Ethernet controller) devices marked with yellow exclamation point I guess that the module is faulty.

• CrazyTalk 6 does not work on my Satellite C660-1LD

  I just bought a Toshiba Satellite C660-1LD with Windows 7, but cannot run CrazyTalk 6 thereon.

  Whenever I try to run the program I just get a message saying "CrazyTalk 6.2 main program has stopped running". I have tried all the solutions of reallusion and been in touch with iYogi but nothing works.

  Does anyone have any suggestions?

  Hey cool, thanks for your comments!

  You re welcome in the forum :)

• Satellite C660 - right of the screen will flash green

  Hey, I wonder if someone can help me - the screen on my satellite C660, only about two months old, started flashing green stripes a couple of days after I set the screen forward slightly. Nothing has got rid of him, and whenever the screen is moved it flickers more strongly or turns into a solid green Strip.

  I thought that this could be a problem where the screen connects to the computer, but I looked around the hinges and it seem not to be the son of cowards. I have not yet contacted Toshiba because I'll have to call their support number UK since France, which will cost a bomb, wonder if anyone here had any ideas first? If it happened to someone else?

  Thank you!

  In my opinion, it is not so important if someone else the bonnet or not and that you should not waste your time waiting for responses.

  I put t know where you bought this laptop but every laptop purchased in Europe has guaranteed EMEA then please call authorized Toshiba service provider in the country where you live now and ask for help. You have the new laptop and if there are some hardware related question lets fix that.

  Addresses and telephone numbers of aspic all you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

  Good luck.