Satellite C660-IHK - 'Reboot & Select good Boot device'

Similar Questions

• Satellite C660: message: reboots and select good boot device

  Hello

  I dropped the laptop today literally a few inches from the ground, it slipped from my hand as I was placing it on the ground. He fell flat.

  Now I see the message "reboot and select proper boot device."

  I tried a few different options that I read, and I see the HARD drive in the BIOS F2 thing or whatever it is called. If it is recognized, but I can't seem to move in the message. Any suggestions?

  Thanks in advance.

  PS I will need clear instructions, I'm not stupid, but I need to explain. I don't understand some of the pieces.

  Thank you

  Hello

  I think that your HARD drive is bad.
  I think that you have not checked it correctly in the BIOS.

  Please go to BIOS once more, by pressing F2.
  Now on the first page, you will see date, time, details of CD/DVD drive and you should also see the details of the disk (size, name)
  You see that?

  Otherwise, the HARD disk is not initialized by the BIOS and this means that, because of the fall, the HARD disk has been damaged.

• Satellite C50-B-13N - error "Reboot and select good boot device."

  Hi all

  My laptop recently bought C50-B-13N moving 39 updates yesterday, when it crashed.

  Get back with me stuck in a loop continuous. After what seemed like the logical approach to reset to factory settings, I have
  seem to have accidentally deleted the data on the disk.

  I have now repeatedly received the error message "Reboot and select proper boot device."

  I tried the F12 approach to , but my Start Menu does not have this option.

  I'm frustrated that the new laptop played if bad, given that I have had Toshiba devices for about 10 years.
  In addition, I am disappointed that potentially serious consequences to remove the drive were clearly deprecated for me, before you start.

  Please give us a solution.
  The laptop is 4 months old.

  In addition, how can I start the process of an application under my warranty?
  A dissatisfied customer of experience to date.

  Kind regards

  CGI

  I seem to have accidentally deleted the data on the disk.

  Obviously the HARD drive recovery procedure is not possible now because the HARD drive recovery files have been deleted.

  I guess you have not created such recovery media as recommended in the user's manual.

  Well, in this case, you have a chance to order a missing middle of recovery and recover the laptop to factory condition.

  Means of recovery can be ordered here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Reboot and select good Boot Device problem - my PC does not start!

  Hi all

  Whenever I turn on my computer I get the message "Reboot and select proper boot device or Insert Boot Media in selected boot device and press a key.

  I checked the diagonistics material and these are the results:

  Test CPU-

  Hard drive: failure of the connection Test - Error Code: BIOHD1

  Memory - past

  I don't think that the issue is a faulty connection. My reason to believe so because I think that I had a virus on my computer (I was not able to confirm) I tried to delete the last time I was able to use the computer. Then I turned off the computer to restart, but unfortunately, that's when I got this error message.

  I had this problem once before (about 3 years ago) and I was not able to solve this problem, so I just stopped using the PC. Then one day my Dad turned on the computer (a few months later) and it worked all of a sudden.

  Anyone know what this problem is? How can I solve this problem?

  Any help is greatly appreciated! Thank you very much for your time and effort!

  Additional information:

  It was originally a windows 7 PC, but I have upgraded to windows 10, which is the current operating system.

  Product: HP p6620f

  I managed to start my PC again.

  I have unplugged all connections and left it that way for about 24 hours. Then I plugged everything back in and all of a sudden the PC worked again. I don't know if it will last, but right now it works.

  I'll write another post if something changes.

• Keep having the message "Reboot and select good boot device ', but seems that there is a work around

  I've read other posts on this message in the community, but think that mine is in a different situation.

  A week ago, I started having this error message when I booted my PC (win8, 64-bit). Fortunately, I have the new bootable USB key. After that I tried everything I could think, (restore and refresh), this message always shows up when I start the PC. So I decided to do a complete reset to factory with the option State "delete all data".

  I was able to complete the procedure. However, I see new things,

  If I restart the PC, I can boot in normal mode, without the error message.

  If I turn off the PC, then turn on again, the error message is back. I found that there is something for the workaround. When the system boots, I hit 'ESC' key and 'remove' to go to the bios interface, go to the 'boot' page, change the order of boot on USB, then change it back to hard drive (so in fact that there is no change), press F10 to save and exit. Then, I can boot into normal system.

  Why is this? Anyone can help with this problem?

  Kind regards

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you get an error message when you work on your computer.

  This could happen because of changes made to your computer.

  I would like to know some information.

  1. What is the brand and model of your computer?
  2. Have you changed boot priority on hard drive?
  3. Did you change your computer before this problem?

  This problem may occur if your hard drive is not detected in the BIOS as first boot priority. You can go to the BIOS (Basic Input Output System)and change the boot drive order so that the hard drive comes first as a boot priority. You should be able to start Windows normally after you save it in this configuration.

  If you would like more information on the BIOS settings, consult the computer manual or contact the manufacturer for more information.

  Note: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I hope this helps. Please let us know the results. We will be happy to help you further.

• Getting started (Windows 8) I get the error message "Reboot and select good Boot Device."

  This problem just started a few days ago.

  I hold the SHIFT key I press Restart, that will get you into the repair environment - then try the "automatic repair" you will find.   It used to be called Startup Repair.

• Satellite M50D-A-10W - error "reboot and select proper boot device."

  I have a Toshiba Satellite M50D-A-10W passing me all nuts "reboot and select proper boot device."

  This has happened before and it was solved by ctr-alt-del and F12 to get into the BIOS where the date went back to some time in 2010 - after put so far and to change the boot device, everything worked fine... until the next day.

  Now I get the screen "reboot and select good boot device ', but the F12 key does not; I also tried F2... the message keep multiplying, no BIOS...
  Help, please!

  In some cases the BIOS is only accessible by pressing the button turn off force on the lower side of the unit.

  Info:
  http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

  After that you were able to start the windows system, its highly recommended to update the BIOS as BIOS update would solve this annoying problem.

  Info:
  http://APS2.toshiba-tro.de/KB0/TSB4903N50000R01.htm

• PC freeze/crash followed a "Reboot and select proper boot device."

  We have 11 PC running on a local area network, all currently running Windows 7 Professional. The following happened in recent weeks, on 4 of our PC 11:

  PC freezes completely, however, the mouse cursor will always pass normally, clicking on anything don't generate a result, or will be by pressing CTRL + ALT + DELETE. My first step in the fight against that had to leave the PC alone for 5-10 minutes to see if the problem resolved itself. After about 5 minutes, the PC will be closed on its own and try to reset, prompting the message:

  "Reboot and select good boot device or Insert Boot Media in selected boot device and press a key.

  When you press a key, the message again and again. The only solution I've found that this was a closed hard, leaving it for a minute and restarting, how everything seems fine.

  I'm suspicious that this may happen again, or on the PC so far unaffected, if someone could advise on what could be the cause, or how to stop from happening, I would be grateful.

  How old are the hard drives on those computers?  Is it possible that they have lack of hard drives?

  Download and run the software tester of the drive by the hard drive manufacturer to test the equipment.  Tell us the model numbers (Device Manager), readers and we'll give you links to get the correct software.

• "Reboot and select proper boot device or insert boot media" tried, still does not.

  I went into the BIOS and changed the order of Boot Drive so that the hard drive comes first as a boot priority, and nothing happened. I always get the reboot and select proper boot device error. My power supply broken so I took an old and put this one rather than broken, but I might miss some cable? I don't know because I'm not good with computers. So if you can help me please, I would be grateful. Thank you.

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing. I would like to ask you:

  • What is the brand and model of your computer?

  To diagnose this problem more, I recommend you to check and make all the cables are properly connected to the devices in the computer. For help with the same, you can either check the manual of the material that you may have received with your computer or you can contact a hardware technician to do the same.

  Once we are sure that the connection is good, we can diagnose more if the problem is with the software/operating system or if it is a hardware failure.

  If you have a Windows DVD or USB created. You can try to boot from the installation media and run a system restore or repair in recovery options. To do this, follow the steps below:

  1. Boot from the installation media.

  2. When you see the Install Windows page, press or click repair your computer to start Windows recovery environment.

  3. In the choose an option screen, Windows recovery environment, press or click on troubleshooting.

  4. Click on Advanced options etselectionnezStartup Repair.

  If the auto repair fails, try the system restore. It will take your system at the time, and when it was working fine. Follow the steps below:

  1. Boot from the installation media.

  2. When you see the Install Windows page, press or click repair your computer to start Windows recovery environment.

  3. In the choose an option screen, Windows recovery environment, press or click on troubleshooting.

  4. Click on Advanced options etselectionnezSystem Restore.

  5. Select the restore point where everything worked well and follow the on-screen instructions

  System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Hope this information was useful. Let us know the results once you have tried these methods.

  Thank you

• Cannot start the computer, the error message "Reboot and Select proper Boot device or Insert Boot Media in selected boot device and press a key any."

  Original title: can't access my BIOS, but blocked on select boot device

  I have a laptop Toshiba Satellite Pro. I gave up some time ago and removed the HARD drive to see if has been affected by the decline, as that was my first thought. "When turned on the laptop back, the error message:" Reboot and select clean boot device or Insert Boot Media in selected boot device and press a key. My HARD drive is installed correctly, that am a qualified technician. The laptop goes directly to this error message, when turned on, so cnnot access to the BIOS. Help, please.

  Hi Ryan,

  Please contact Microsoft Community. I will surely help you this question.

  To better understand the issue, let me know if you have tried pressing the F12 key or the key that is used to start the BIOS on the computer?

  Method 1:

  You may need to press the key (which is used to start-up the BIOS) as soon as you turn on your computer before Windows starts. See the article for more information.

  http://forums.Toshiba.com/T5/Windows-7-knowledge-base/how-to-enter-the-system-BIOS-on-Windows-7-computers/Ta-p/275629

  Method 2:

  If the problem persists, I suggest you to return the item and check if it helps.

  What can I do if my laptop Windows 7 or Windows Vista does not start?
  http://forums.Toshiba.com/T5/computer-troubleshooting/what-can-I-do-if-my-Windows-7-or-Windows-Vista-laptop-won-t/Ta-p/285717

  If the problem persists, I suggest you to contact the Toshiba Support for assistance.

  http://support.Toshiba.com/support/home

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• HP Pavilion A6722SC: reboot and select proper boot device or insert boot media in selected boot device and press a key

  My computer has just stopped working and when I turned it on, it says I should change my hard drive. I did, but now the message is whenever I turn on my computer: reboot and select proper boot device or insert boot media in selected boot device and press a key.

  I have Hp Pavilion A6722SC. I have my 1st drive on the driver that I bought and I have the Boot Device Priority :

  1st boot Device [hard disk group]

  2 St boot Device [CD-ROM Group]

  3rd boot device [network startup group]

  4 rd boot Device [group Floppy]

  -> Disk Boot Priority group [not installed]

  -> Group of CD-ROM boot Priority [DSK02...]

  -> Group of HDD to boot Priority [DSK00...]

  -> Group network boot priority [not installed]

  I saw that many said I should disable the floppy, or I should have hard on the boot device 1 or driver, but this doesn't work for me. Someone who have solved problems of this kind? I need help!

  Thanks in advance.

  Sorry for the bad spelling.

  I needed a new OS... I had Windows Vista and I can't install it more, so I have to buy a new OS.

• ASUS computer Unable to boot error "Reboot and select clean boot device or Insert Boot Media in selected boot device and press a key." "

  Original title: ASUS computer problem

  This morning I slammed my hard cutting computer. This afternoon, when I went to get on a black screen appears and says "Reboot and select proper boot device or Insert Boot Media in selected boot device and press a key." When I go to press the same message poping maintains and does not allow me to go anywhere else. My computer also makes a click when I try to restart. Any suggestion would be appreciated. Thank you.

  Adam

  The 'Ticking' noise is indicative of an HD program.  You can made a brick out of it.  The Message on the selection of the appropriate boot device indicates the tilt of the computer 'See' the HD.

  You see the HD in the BIOS when you start?

• Why Microsoft Virtual PC comes with Reboot and select proper boot device?

  Hello

  When that I start Microsoft Virtual PC 2007 it comes up with the following error message:

  Reboot and select proper boot device

  or insertion of the in the selected boot device bootable media

  How can I fix it?

  I am running Windows 7 Professional 32 - bit.

  Any help?

  You have installed an operating system on the virtual device?
  You have created a virtual machine. When you start it, it will try to start.
  There is nothing on the virtual drive so that the system asks to find a bootable floppy
  disk or CD/DVD.

  If you still need help, you can post in the Microsoft Virtualization forum listed below:
  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

  Sincerely,

• I get an error. "reboot and select proper boot device or insert boot media in selected boot device and press a key" while using the hard drive.

  Replace drive hard hgst with seagate and when I replaced the hard drive from hgst orignial he says "reboot and select proper boot device or insert boot media in selected boot device and press a key" and when I tried to install OS it does not display the hard drives to install operating system.please help

  Hello

  Check your cable connections. If necessary check with the manufacturer of the motherboard System Support
  and Seagate Support.

  Make sure that settings/settings (BIOS/CMOS) often F2 that you start the computer is configured to start at
  on the CD/DVD first in the boot order.

  Seagate - Support
  http://www.Seagate.com/support/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How do I repair: windows7 error reboot and select proper boot device?

  My computer is about 2 years old.  Sound works just fine.  One morning, I started it up and a black screen came with: reboot and select proper boot device or insert boot media in selected boot device and press a key.  Any key you hit it just kept announces the same message, I had to tough out.  As long as I start the computer with Del, F8 or F10, I can get the computer to boot. No matter what I change, it works for a few times then goes back to the same error.  Also it will not always wake up after he falls asleep.  I tried to do a repair of systems, but it does not work

  Hello

  1 do you have made no changes to software before this problem?

  2. you have the Windows 7 installation disc?

  3. what changes did you and have you been able to boot to the desktop after that?

  Method 1:

   

  I also suggest you to try the other options of WINRE (Windows Recovery Environment) and check.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Method 2:

  I also suggest you to check the drive for errors that it can cause a Windows to boot.

  Follow this step to do the same thing:

  1. Click Start
  2. Type: CMD, according to the results, right-click CMD-> click on "Run as Administrator"
  3. At the command prompt, type: chkdsk /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  The issue can also occur if the boot device is not correctly defined in the BIOS. Make sure that the hard drive where Windows is installed is selected as first boot device.

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  See also:

  http://support.Microsoft.com/kb/266283