Satellite C660 - no access Internet - yellow exclamation point appears

Similar Questions

• loss of internet connection on windows 7 pro 64. Says connected but no internet access with yellow exclamation point! Help, please!

  I keep losing internet connection, I have windows 7 and every time I connect it to the wireless internet works for 5 minutes, then a little ytellow icon pop up and say its connected without internet access. Its happened to me before and recently started happening to my cpu. I did a FRESH install of windows to see if it can help, but it didn't. IM literally on the point of throwing my processor through the cause of wall, I can't find a solution to this anywhere. Whenever the yellow icon pops up that I have troubleshoot and it indicates the default gateway was unavailable and that fixed it, then I have internet again for about 2-5 minutes and it does the same thing. Ive never had this problem on my cpu and the network has not been changed or anything, so I don't know what that the * could cause this. I literally wiped everything on my cpu and then do a system image to restore too. Ive been messing around with the registry, deletion of things here and there missions that I read, but only thing that happens is losing internet alltogether and must restore from system image. I'm really running out of ideas. Help, please. I have an adapter netgear wn311b wireless pci-express with the latest drivers.

  to detect new updates for network based components on intel:

  http://www.Intel.com/p/en_US/support/detect/?IID=subhdr+dnlds_detect

  You will be asked to download and install active x components.

  After the installation of the small file, click on the "expand all" button

  You can choose to update your components wired network if necessary.

  then re-install your wireless network management software.

  assuming that your wireless network is intact (connected, permits), you can surf the net.

  If the problem persists, troubleshoot more away:

  When the computer is turned off, set again you netgear pci wireless adapter.

  set of antenna for optimal orientation.

  Check if your computer is authorized by your wireless router.

  check the signal strength of your wireless router and the wireless pci adapter.

• Network of the island so no internet access remove a yellow exclamation point in the network icon in the taskbar.

  Hi, I have 10 windows 7 Enterprise workstations connected to a Windows 2008 domain and there is no internet connectivity (this is normal) but each workstation network icon displays an exclamation point yellow because she had not any internet connection. Isn't there anyway other than hide the icon which I don't want to get the yellow exclamation point to appear.

  Thanks Simon.

  I finally found the answer. If you are running Windows server 2008 R2 edition, then you can find this policy in the strategy of Group Editor and it will be effective for your Windows 7 machines. If this is not the case, as I am on Windows server 2008 standard and then, is not an option within the Server Group Policy Editor must therefore be as a change in local policy on the workstations.

  It is found on the local computer by running gpedit.msc and looking: -.

  Local computer policy,

  Administrative templates,

  Network,

  Network connections,

  Does not display the network icon "local access only".

  Select this option enabled.

  Closing of session and immediately and this will make the yellow exclamation point icon disapear.

• Code 31, Microsoft IASATAP adapter doesn't work does not correctly, the yellow exclamation point, no internet

  I have Emachines E620, Microsoft Vista and service pack 1. My PC cannot connect to the internet and stop a yellow exclamation point error message. My internet providers technical support, I lost my IP address and cannot be recovered. My PC shows that my card Microsoft ISATAP does not work, but when we try to update, it says I have the updated version of the adapter.

  I tried everything the system fixed but did not work. Can't try bugs online because I can not connect to internet. My research on the Internet, maybe I need service pack 2. Can someone tell me if this could work? If so, what is the way least costly to achieve? What does it mean that my PC is undesirable?

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/e5f8973b-0079-4E2B-8da4-7bbd345b9426

  Read the info above from Microsoft Support.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.eMachines.com/support/drivers.html

  Go to the Web site of emachine'ss to the above link > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now that you have no Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite Pro A300-22F - WLAN is listed with a yellow exclamation point

  I just bought an A300-22nd.
  WIFI does not work - in Device Manager the conroller of network (under 'other devices') has an excalamation mark on it - the problem is not installed driver.

  Laptop came with a sheet of additive of toshiba on problems with wireless connectivity - which goes through how to install the driver. Two problems - the leaflet is reserved to L300 L300D and copying is of such poor quality that I can't read the instructions!

  I know that this phone has WLAN (a, d, g and draft n), and it has a switch for him - what is on and lights up.

  At the moment I am connected to the router broadband - not much use as my PC is at the front desk even - I need a wireless connectivity!

  Help!

  Hello!

  On the Toshiba site, you can download all the drivers for your laptop and so he should t be a problem to solve this yellow exclamation point:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Download the driver the most recent and that s it! :)

  In addition, WLAN connectivity can be enabled using the hardware on the laptop switch * and * if you press FN + F8.

  Good bye

• In devices and printers, I have an icon for a laptop with a yellow exclamation point. I have a desktop computer and remove this icon of the laptop.

  A laptop once was connected to my desktop via USB cable PC; It belonged to me.  The owner wants to access its database of the company, but in vain.

  Now, in devices and printers, I have a laptop icon that is not one of my devices, but the Device Manager lists in "Other devices" with a (USB) universal serial bus controller, which is also included in the icon of the computer laptop properties under the material.  The yellow exclamation point is for troubleshooting.  The problem is: I do not own a laptop device.

  I want to remove the icon of the laptop and its inscriptions, including the (USB) universal serial bus controller.  Both are marked by a yellow exclamation point, but, of course, they do not work because they do not exist.  But this icon of the laptop has name my PC on it.

  My desktop PC should not be listed in devices and printers, does it?

  Hello.

  Open devices and printers right click on the device - remove the instrument.

• Tecra M2: XP Device Manager shows 4 yellow exclamation points

  Hello

  I had too to recharge my laptop with XP and have 4 devices in the device with the yellow exclamation point Manager.

  Ethernet controller
  Network controller
  Unkown
  Multimedia audio controller.

  I have havetried to install drivers WITHOUT success.
  I have tried loads yet joy o,

  I'm missing something.
  Can someone help

  Hello

  I'll try to identify the devices without plug & play id, but I can't guarantee anything.
  If something is wrong please post the PnP - ID (Device Manager-> properties-> details-> ID devices material).

  Ethernet controller is Intel Pro/100 VE or Intel Pro 1000/MT (both have been integrating M2) network adapter
  http://support.toshiba-tro.de/Tools/updates/LAN/LAN-XP-8790.zip or http://support.toshiba-tro.de/tedd-files2/0/lan-20070912134727.zip

  Network controller is Intel Pro Wireless 2200 GB or 2100 (same as above, both were build most of the cases. Others like too Atheros and Cisco, but not so often)
  http://downloadmirror.Intel.com/13000/Eng/11.5.0.0_xDrivers.zip or http://downloadmirror.intel.com/11918/eng/Intel (R) PROWireless21_125836.zip

  Unknown device of infrared
  http://support.toshiba-tro.de/tools/Tecra/TM2/XP/IrDA-TM2-XP-5125000.zip

  Multimedia audio controller is the SoundMax
  http://support.toshiba-tro.de/tools/Tecra/TM2/XP/sound-TM2-XP-512015160.zip

  Please allow me two questions:
  Why don't you use the recovery media. It is much easier?
  Have you tried to install any driver Toshiba driver page? http://computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Basic with yellow exclamation point features

  Hello

  My L412 supplied with Windows 7 Home Premium. I reinstalled Windows using a purchased Windows 7 ultimate DVD and I installed most of the software, but I still 3 devices basic system with yellow exclamation points on them.

  Here is a screenshot

  http://Tinypic.com/r/28j9loy/7

  Any ideas on how to fix?

  Try the driver of lenovo card reader

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-75277

• in Device Manager yellow exclamation point cannot read a cd

  Open an e-mail with an attachment. It was the power point. I haven't it. I went so far and SEEN download many things that I did not so I went out. Since

  Then, I can not read a cd and receive Assistant saying a device pci not matched with the right software. Device Manager, it shows a lite on dvd with a yellow

  exclamation point and a pci with a device also. I found the files and they show yellow exclamation point and said microsoft answers site. This led me here

  Hi, Fyodor,

   
  What is the operating system installed on the computer?
   
  I suggest you to follow the steps and check if it helps.
   
   
  Method 1: Refresh the Device Manager and check if it helps.

  (a) click Start.

  (b) right click on computer.

  (c), click on manage.

  (d) click on Device Manager.

  (e) right click on computer and click Scan for hardware changes.

   
   
  Method 2: Uninstall and reinstall the drivers for DVD player and check if it helps.
  Uninstall or reinstall a device
  Note: This link is only applicable for Windows 7 and Windows Server 2008.
   
  Method 3: Follow the link and check if that helps.
  Your CD or DVD drive cannot read or write media

• My CD drive on my Dell 2400 appears disabled (on Admin Managemnt yellow exclamation point) as this is my plugin dvd recordr/cd player recorder. How can I fix? Thank you

  My CD drive on my Dell 2400 appears disabled (on Admin Managemnt yellow exclamation point) as this is my plugin dvd recordr/cd player recorder. How can I fix? Thank you

  Locate your CD drive integrated in the device list manager.

  Do a right click on it, it should appear a window with "Disable"... 'Enable '.

  Click Activate.

  It is a possibility, the other is...

  The fact that you are also using EXTERNAL units could be the 'reason' why one integrated disabled to start with.

  The USB in the BIOS setting must be wrong... to do this.

  In addition, the "HALT ON...» ' Command, in the BIOS, will not. (It is possible that the "Halt" command is... ON "ALL ERRORS").

  Assign to this... "WITHOUT ERRORS".

  This should cure the problem of USB connection (for external use) disable your "built-in" CD player

• Point of "Unknown device" in Device Manager with yellow exclamation point

  I have a VGN-FW170J laptop.  My poster an "unknown device" Device Manager with a yellow exclamation point next to it. indicates that the driver is not installed for this device.  How to solve the problem?  Sony Firmware Extension Parser device driver "" SODFEP-00270203-0083. "." EXE"what to fix this problem, BUT NOT compatible with my computer.  Need a solution

  Hey there GEP170!

  Please provide additional information about your question. This camera is connected to your computer? To check if this feature is one that is being indicated by the Device Manager, you can try to uninstall this device. If this device still appears in Device Manager, it only means it could be another device.

  Please post here, what happens if you uninstall this device.

  Thank you

  ~ Tim

• triangle yellow-problem Internet with exclamation point

  I have a HP Pavilion g series and I always had the problem of disconnection of the internet randomly.  I'll work on what Web page all of a sudden the internet will be cut off and I'll get the yellow triangle with an exclamation point "no internet access" above wifi bars in the lower right part of the screen.  It will take 10 to 30 seconds for it to reconnect, but it is annoying because it happens quite often.  I lived abroad since I was the computer (a friend of mine he me brought States) so I always thought it was the unpredictable internet of South America.  But now I'm back in the United States and it does the same thing.  Any suggestions greatly appreciated!

  Of course, that's what I've updated and it worked!

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...

• Minor problem with the New Installation of Windows 7 on my Inspiron E1705/9400 - two entries for "Base system device" under "Other devices" with yellow exclamation point

  Hello

  First of all, let me tell you about my system.   It is of a laptop Inspiron E1705/9400 with the Core 2 Duo T7400 processor clocked at 2.16 GHZ.   It has 2 GB of RAM and a hard drive on the Hitachi Travelstar nine 500 GB (7200 RPM).   It also has the GeForce Go 7900 GS video card.    Previously, it had Windows XP Professional (32 bit) and worked well.   But, I have three computers in my home and Home Office and would they work better together on my wired home network, so I'm upgrading all three to Windows 7.   My two desktops (a Dimension XPS 420 and the other Dimension XPS 430) seem like they will be no problem to upgrade to Windows 7.   But, this laptop was not on the list of Dell Windows 7 compatibility.   However, the Windows 7 Upgrade Advisor that I have downloaded and run seemed to say that it was OK to do a clean install of Windows 7 32-bit and he had only a few minor issues, where it says search the drivers updated from the manufacturer.   Initially, the laptop came with a 100 GB hard drive.   For my use, which becomes very small, so I decided to get the exact same 7200 RPM drive 500 GB size.   This will allow me to do a clean install of the 32 bit Windows 7 OS on the new hard drive and not have to wipe the old disk to do so.   I can just keep the old HD and paste it back whenever I need to get something out of it.

  So, here's my minor problem.   After the transfer of some elements off the coast of the old hard drive, I installed the new 500 GB drive and installed a cleaning of the 32-bit version of Windows 7.    I'm happy to announce that I have not had virtually no problems with installation and everything seems to work fine.   He seems a little more zippy than before and I have not met so far that doesn't seem to work.   I went through most of features and almost everything is superb.   But there is a minor problem, showing in Device Manager.   At least, I think it's a minor problem, but maybe someone can give me feedback to know if she is or not.

  In the Device Manager list, there is a category called "other devices" now and the icon shows a little white circle with an exclamation mark.    When you expand this category, you see two identical entries that say "Base system device" and the icon has a yellow circle with an exclamation mark inside.     I know from experience that it is not a good thing to see items in the device manager that have a yellow circle with an exclamation point.   I clicked on both of them and neither one really tells you what the device is, or who did what is site you would go to a driver.    On the general tab, it has the following information:

  -Device type Other devices

  Reference of the manufacturer- Unknown

                       Location     -         Bus PCI 3, device 1, function 3

  
  

  Under device status, it says the following:

                         The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information

  To find a driver for this device, click Update driver.

  Each of the entries seem to be almost the same thing... but not exactly.   The other has the location

  list PCI Bus 3, device 1, function 2... instead of function 1.   This seems to be the only difference.

  I tried the button to update the driver, but that doesn't seem to work.   No matter if you say it looks like your

  computer or to look for a new driver from the internet, it does not find anything.     As I said at the beginning,

  the system seems to work very well... but, given that I don't know what this device is or does, I might be missing something.

  He drives me crazy just have these yellow circles with exclamation point hanging out in my device manager.

  I could really use some help here.    Any ideas or help would be greatly appreciated.

  Thank you

  Bryan Ray (Richmond, WILL)

  BTW, I just downloaded and installed the driver pack from this ftp location and it worked, even for Windows 8.1 - 64 bit.

  Thanks Steve!

  Roger

• Satellite C660 - TOSHIBA Accessibility error

  Hello

  I recently bought a Satellite C660/C660D fine, apart from one or two minor issues (which this thread is on about). First of all, the laptop was and is still littered with loads of random software from TOSHIBA, here is a list:

  + TOSHIBA Assist +.
  + TOSHIBA Bulletin Board.
  + TOSHIBA ConfigFree +.
  + TOSHIBA Disc Creator +.
  + TOSHIBA face recognition.
  + Support utility TOSHIBA Flash Cards +.
  + TOSHIBA hardware setup +.
  + TOSHIBA HDD/SSD Alert +.
  + TOSHIBA Media Controller +.
  + TOSHIBA Media Controller plugin +.
  + TOSHIBA online product information.
  + TOSHIBA Recovery Media Creator +.
  + TOSHIBA Recovery Media Creator reminder +.
  + TOSHIBA ReelTime +.
  + TOSHIBA Service Station +.
  + TOSHIBA supervisor password +.
  + Toshiba TEMPRO +.
  + Package + Toshiba value added
  + TOSHIBA Web Camera Application.

  Is there an ISO image of recovery pre made somewhere or do I have to make my own, because if I decide to unisntall some of these programs, I could need at a later date?

  The second issue is with the TOSHIBA Accessibility application which shows the FN keys, it does not seem to start. He worked the first day then I disabled all startup TOSHIBA applications and I get the following error: "registry is missing or may be broken. ', I don't know why!

  I tried cleaning the registry, as well as the registry is not broken.

  * Thanks in advance *.

  -Olivier

  Hi Olivier,.

  I'm happy to hear that you are owner of laptop Toshiba too and you've discovered the forum here. We can discuss everything on laptops from Toshiba, that s interesting :)

  I'll try to help you resolve this issue:

  1.Yes, there is a recovery image for restore factory settings with all drivers and tools on your laptop but is important burn you this image to a blank DVD using pre-installed recovery media creator. You will get a disc with an image of Windows with all the drivers and tools => settings of the case. Thus, the same parameters as you purchased the computer.

  2.i think that FN keys don t work because you have disabled some important tools Toshiba they are necessary for the FN keys. For FN keys TOSHIBA button Support and TOSHIBA Flash Cards startup items are absolutely necessary, so you should allow them and restart the computer.

• Code 31 Plug-and-Play software enumerator driver has a yellow exclamation point in Device Manager

  Hello, hope you can help.  XP sp3 Microsoft PNP driver 5.1.2600.0 streamci.dll and pilot 5.3.2600.5512 swenum.sys ESS Maestro 3i Audio Driver 5.12.01.1174.  No sound anywhere.  No sound Windows logon. Yellow exclamation mark in device next to the PNP manager.  In Device Manager, I try to update Pilot PNP and a dialog box ' device does not work because windows cannot load the drivers required for this device. Code 31. "I recently installed a new 256 MB RAM memory.  With the previous installed card 128 MB total RAM memory is now 386 mb.  My system runs faster.  I also bought a drive hard outside with the error "this device is not configured correctly code 1" let Microsoft FIXNOW or I tried a Hdwe installation with an error ' continues could destabilize your system ", I installed anyway.  Hdwe installation of HARD drive included a generic Volume with the same error.  I continued anyway.

  I tried for hours of internet research.  Can you help me

  PS. thought I had a chipset intel on this dell c600.  went intel.com and ran an intel driver update utility program to find what I had drivers.  Results: Intel Chipset Software installation utility (Inf chipset) product detect: no current Version: None

  Hi jojojangle,

  According to the support Web site Dell C600 is only supported in Windows 2000. You can check the link below:http://support.dell.com/support/downloads/devices.aspx?c=us&cs=555&l=en&s=biz&osl=en&SystemID=LAT_PNT_P3C_C600&os=WNT5

  You can try to make back the driver and check if it helps. See the link for the procedure below:

  How to roll back a device driver:http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/driverrollback.mspx

  For reference: explanation of error codes generated by Device Manager in Windows XP Professional:http://support.microsoft.com/kb/310123

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.