Satellite C660 powers, black screen and switches off the power

Hello world.

I have a C660 - 22v.Everything worked very well. An hour later, then to use the laptop again, it works, and he turned on as normal in 2 clicks, then more nothing. Just a black screen, not yet turned on, then after 5 to 15 seconds, the fan accelerates for a second or 2, then the laptop turns off.

Tried with the batteryout & just the charger pluged, just the battery, hold the power button, all sorts of ways, but it only of the switches off the power.

I think that the hard drive has failed. Any help would be welcome as its out of warranty (16 months).

A big thank you in advance, Neil.

In my opinion it has nothing to do with the hard drive. I assume that there is a problem of electronic power supply. I have a similar problem with my A300 and at the moment I put t know what to do.
Repair is probably quite expensive so I m thinking about selling on eBay as being faulty.

Problem is that we cannot do much. What should do? You can dismount, take a look inside and put the new.

Either it works or not. I'm afraid that your problem is for the service and it must be checked by the guys from the services of m.

Tags: Toshiba

Similar Questions

  • Brother MFC-7420. Usually, it works on Windows 7, it will not print and I have to unload the coil and switch off the printer before Relighting.

    I use a Brother MFC-7420. Usually, it works under Windows 7, but from time to time (maybe 1 in 20 times) he will not print and I have to unload the coil and switch off the printer before Relighting. It is not always the case, but it is enough times to be a nuisance.

    Ideas, people?

    Hello

    This problem occurs when you make changes to the computer?

    Method 1: Diagnose and automatically fix problems printing and printer

    http://support.Microsoft.com/mats/printing_problems/

    Method 2: Refer to this link: I can not print from my computer via the USB port.

     
     

    If you have problems, I haveinstall updated printer drivers, see this link:
    http://www.brother-USA.com/downloads/default.aspx?PgId=5&R3ModelID=MFC7420

    Refer to this: update the drivers for hardware that does not work properly.

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    See also: printer in Windows problems
    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    I hope this helps!

  • After logging on my Satellite Pro only black screen and the cursor are visible

    I have a windows vista pro (PSAASE-00G004GR) satellite after turn on and typing the password for windows vista, the screen goes black but I see that the cursor moves & because it seems that the hard drive also works in th background, but I can't see anything except the mouse cursor , I tried to boor with other options (LAST WORK safe MODE KNOWN FEATURES... etc) but it's still the same only black screen and the cursor...

    I do not prefer the product cause of my data recovery on this subject, any ideas?
    thnx

    Hello

    You have the Satellite Pro A100 PSAAS hmm if you want to save your personal data, I recommend to remove the portable computer HARD drive and try connecting it to another computer via an external USB HDD controller. These cases of 2.5 HARD disk are not expensive and you can buy it in every store of the computer.

    Then you could try to recover the laptop delivered together with the Toshiba Recovery CD.
    But wait; have you tried to connect the laptop to the external display?
    Check it!
    Maybe you could see something on the second screen.

    I think that this procedure could be useful to clarify what s wrong.
    To me this question looks like a small little dysfunction of the FL inverter.
    In this case the installation of the new operating system will help you not to solve this problem.

    But who knows the verification is necessary to find what could be wrong.

    Good luck and bye ;)

  • Satellite Pro L450D black screen and will not respond to any keys

    Hello

    My niece has used his Toshiba L450D for almost a year now and he really liked it, who was until last month. She turned on her laptop and when she presses the button of the mouse, the button cracked and he fell into the laptop.

    Now my brother contacted Toshiba and I was told because it is under warranty it might return for repair because it was a common fault. Then he he packed in loads of air bubbles and a box to make sure it was safe.

    A few weeks later he came back repaired but we were all shocked that the laptop was put in a very loose box and you could hear this rattling noise. When we turned on the battery was flat and we had a new boot menu.

    As she installed it Windows 7 laptop would boot directly into Windows 7, but now after the repair of the laptop shows a menu black screen with as follows:

    + Windows 7 +.
    + Recover Windows to Factory Settings [active EMS] +.

    So we started in Windows and everything went well, but now after 5 or 10 or even 20 minutes, laptop displays a black screen and will not respond to keys or mouse movement. There is nothing on the screen its just black.

    I started in SafeMode (which was more difficult with the new menu) and it does the same thing. I even managed to do a virus scan quick who took 3-4 minutes and was clean.

    I would like some advice on what my niece is very angry, and it's difficult to explain what is happening to a child in the primary school.

    Any help would be grateful.

    Hello

    Have you tried the option of HARD drive recovery?

    If this is not the case, try to set the notebook back to factory settings using HARD drive recovery.
    Turn on the device, press F12, choose repair my computer, then select Toshiba HDD recovery.

    I hope it will work!

  • Satellite C660 - 115 WLan connection only works when the power cable is connected

    Hello

    A few weeks ago, I bought a Satellite C660-115. I want to surf the internet anywhere in my house without any son/cables.
    On the first day, I had this problem: when I disconnect _power_ cable, the wireless connection will stop working.

    The Web page on my screen will always be there, but a new page loading is a problem.
    It is sometimes useful to recharge (by pressing F5), - sometimes not. It is always useful to "ip address of repair", but not for long.

    The only solution is to atach regardless of how much power the battery has still the power cord.
    When I do, it is no problem whith the connection at all.
    I went back to the store where I bought it, they related to their own wireless network and they have had the same problem after a few minutes. In the shop too attach the power cable solved the problem.

    So the problem must be in my lap top, not in my network (modem or almost).

    Doesn't this all seem familiar, and if so, how can I solve this?

    I hope that my English is understandable, I live in Holland.
    Thanks in advance!

    Here is the solution:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59177

    Change options for saving for the Wlan in Windows 7 power management

  • Satellite A200-1CR - black screen and no boot

    Model:
    Toshiba Satellite A200-1CR

    Question:
    By pressing the power button to power on the computer for a full boot, the power LED lights up but still black screen (not even of lighting). The logo led 'Satellite' in the lower left corner of the chassis remains off while the HARD drive has made a unique quick snap; DVD activity led (the device) always remains on even without any CD inserted, by pressing the eject button do nothing (status bar is locked) and no sounds of activity.
    No logo screen of boot (show stays), not of beeps dark and wide, no DVD or HARD disk activity, keyboard seems does not (all combinations that should light up an led, capslock, numlock, etc, does nothing), the fan works.

    I have already (without success) tried:
    -Unlock the tray, insert the rescue CD and power on
    -Remove the main battery and power on with AC adapter only
    -Insert a bootable USB stick/external HARD drive

    The computer worked as expected the day before and there has not been any kind of shock. Described is the situation I faced when I turned on the next time (only 24 hours later).

    What could be wrong?
    Thank you.

    > By pressing the power button to power on the computer for a full boot, the power led turns on but screen stays black

    Well, looks like hardware problem; Maybe the memory problem or something serious with the mother or the CPU. It of really difficult to say what could cause this.
    You can try to check the RAM modules.
    Trying to start using a maybe only module, it is useful in the case otherwise I fear, you will need assistance from technicians Toshiba ASP m

  • Satellite L650-1EQ - black screen and overheating problems

    Hello

    I have a problem with my laptop Satellite L650-1EQ.
    A few days ago my laptop was overheated quite often.
    I would like to start playing a video game and the computer could actually turn off after 10 minutes of playing it.

    I realized that this was getting serious so I stopped using my computer to play games and I decided that I need to clean it. However, I was looking for online on how to clean up my computer and then my screen turns white!

    I didn't know what happened and was very scared.
    I turned off the computer.

    The next day I turned on the computer to see if it was good, and the screen was black however the laptop power light comes on and I hear the vents work.

    I turned on the computer and tried to start it again, and the computer started fine.
    The image appeared and the problems disappeared.
    But I knew that something bad was about to come so I took the laptop computer repair technician.

    I told her what happened.
    He has used the vacuum to "clean" the dust of the computer and told me to go back if the computer kept a overheating.

    I restarted the computer again when I came home, and after an hour and a half the computer screen turns white but I don't think that it overheated. : s

    I tried to start the computer and the screen is black, no picture, the only light on is the power one and I hear the vents work. I tried of transformed market but now it just stays as if it were now.

    I tried on another computer for solutions such as the battery and pressing the power button for 2 minutes and other things, but nothing has worked. I don't know what to do so I decided to create a thread to get answers: s

    Please help me, thank you!

    PS: I'm sorry for my English, I know that's not the best

    Hello

    This does not sound very good boyfriend. I'm afraid that there could be some sort of dysfunction material Mr. something like the problems of graphics card or motherboard issue.

    You can try plugging the external monitor to the laptop just to see if something would be visible on 2nd screen.
    But if nothing will appear on the 2nd monitor, I think that the chip of the graphics card died :(

    Of course, this is just my personal opinion and a laptop computer technician must check the laptop to know what part of the laptop could be faulty.

  • Satellite L300D-13s - black screen and nothing appears

    Hi, I have Toshiba Satellite L300D-13 s (pslc8e-02p013en).

    I turned off my laptop as usual and when trying to turn it back on yesterday, I have NO screen. I can here it whirring and all my lights are on, my battery is showing green (paying), but all I have is a black screen, no markers, imprecateurs, whatever it is?
    Have I somehow turned off the screen?

    I was in battery saving mode if it has nothing to do with it at all?

    PLEASE HELP - I DON'T KNOW WHAT TO TRY

    Thank you

    Hey,.

    Normally the battery saving mode (stand-by) has nothing to it. On my Satellite L300, it works correctly and I often use this mode.

    In any case, it would be interesting to know if you can see an image on an external monitor. The internal monitor FL inverter is may be defective and so it does not show an image... Who knows? ?:|

  • Toshiba Satellite A215-A4757 black screen and unable to initialize

    Received the black screen after trying to download the update of the BIOS; has been logged in as administrator, but received the error 'need to be logged in as an administrator. Could not go further. Process had not begun restore point then minimized and tried to validate the connection as an administrator. Locked screen and got a black screen with errors about bad driver. Doesn't seem to be valid. In any case, I liquidated - power off. Does not power on f11 or any other key - cannot start. Keyboard seems dead. seeing lights to drive DVD could perhaps start with the startup disk. However, do not have (not too smart). Is there a way to get a system of information-based boot disk? I had a previous assignment but did not because months ago. Thanks for any help/suggestions.

    Perhaps your message to: http://forums.toshiba.com/?

  • Satellite A200 - loses the battery, switch off the power

    I have a relatively old Satellite A200, yet almost all inside is new except the battery. The battery has a very short life, but that's because its old. Recently the computer started to suddenly lose the battery, so the charge light stays on, the battery light turns off and the battery icon said "plugged in, not charging." However, the computer still work on battery power. If I see it at the time, then by removing and replacing the charger repeatedly, I can start it load again, but if I am not it switches off without warning. Since the battery life is now less than a minute which often.

    I don't think that the problem is with the charger because it always shows the charger is plugged in, and when the computer is off the battery light is always on when it is plugged. I had a problem with the power connector, but if the motherboard was recently replaced so I don't think that's it either.

    If someone could help it would save me a lot of frustration, thank you.

    Hello

    At first, I must say that you should not be frustrated. Problems with consumer products are normal, and each of us has problems with laptops, televisions or other electronic product.

    Let's see what you can do about it.
    Your description is OK, but what I want to know is follow:
    When you remove the battery can work on your laptop with no problems (start work, cut)?

    I also think that the battery is too old and I presume it's troublemaker in the history. It is not easy to explain what behavior flashing if you have a defective hardware or old coin inside.

    Maybe, you need to buy the replacement of the battery and check the features for laptop and the battery, just to see if everything will be OK again. If you will be faced with the same problem again then we can discuss what may be the problem.
    In my opinion only a reason for this could be electronic power supply.

    What do you think?

  • Reference Dell 5558, 8 beebing on startup, no black screen and works with the beebing

    Hello

    I have a problem with my Dell insipiron r15 5558, I bought it 3 months ago. But last month my laptop beep 8 times at startup. When this happens, I usually only the power out of my laptop because of the distracting noise and turn it back on. Once I powered on / off power for 3 - 4 times it don't beep plus one works very well. Anyone know what could be the problem? I ran a Test LCD and an analysis of Pre-boot system, it was running fine without any problem, I used my warranty and sent the labtop to dell here the last 2 weeks, they sent and didn't tell that it is no problem with my laptop, but it is still beebing 8 times by clicking on the power on

    BTW. I'm on Windows 10 pro 64-bit

    Hello

    8 attention beep is usually to do with the problems of LCD, as you already know.   If diagnostics are passing and the system has been returned to the warehouse for the evaluation, the only thing I think it could be is a connecting cable of the LCD screen.  You said sometimes works very well after starting several times, then maybe it's the cable.

    Have you tried to hold the screen in different positions when it turn on?   Just to see if guidance works better and maybe the cable is a better connection.  You can check if the cable is loose yourself.  Here is a link to the online manual for the Inspiron 15r 5558.  You can use it to see how a screen is normally replaced, but instead to replace it you would just check the connection of the cable to make sure it's tight.  NOTE: Make sure you follow the safety instructions and information in the section "before you begin".

    Let us know if you find a loose fitting and if the adjustment of the angle of the screen change anything when you try to turn on the system.  I hope it's something as simple as a bad connection and you can correct it.  If the ringing continues I recommend to contact Dell support again and have them send it back for repair, unfortunately.

    Todd

  • 17 e040us seeing supply and turned on WIFI light after switching off the power

    17 - e040us after HPO updates and Windows Update now when I turned off the computer, power and wifi lights stay on... have to hold the power button in get them to turn off before I turn on the back

    tried the power settings and looked in the BIOS, there is nothing that I see... any ideas?

    Solved returned to the F8 BIOS and the problem disappeared... .has been F14, the origin of the problem

  • A lot of questions on how stop and turn off the power of the computer for Windows 8 without having to use the own compiuters out button?

    I have seen a lot of questions on how do I turn off Windows 8 and stop computer but no answers?

    I use CTRL, ALT & DEL, and then click the below icon to the right, there are then 3 choices, sleep, stop, or restart.

    Is there an easier way?

    8 win there a way. 1. move the cursor to the top right of the screen

    2. click on settings

    3 be able to click at the bottom of the screen

    4. choose: sleep, Shut Down, or update and reboot

    This isn't my idea, but someone sent me.

  • PAVILLION DV6: INST W10 NO WIFI CP SWITHC DOES SWITCH OFF THE POWER AS SOON AS TURNED ON AIRPLANE TOGGLE SW HDWR MODE...

    Installed w10 CLEAN(FREE UPGRADE) WIFI NOT WORKING HARDWARE SWITCH TOGGLE AIRPLANE MODE (led does not change, but software reinforces airplan toggleing mode, WHO ALSO WORKS IN the PANEL.)  USING WIFI SWITCHES CONTROL PANEL WILL ALLOW ME TO MOVE the INDICATOR, BUT IT MOVED SIMPLY the right side BACK.  ETHERNET USING WORKS NOW.  Bluetooth not active either, but everything else works fine

    function + F12 does nothing.

    removing the broadcam wifi and restarting brings just it back right.

    update the Windows says that the best driver already installed...

    any help will be greatly appreciated-thanks in advance!

    It came from what the original hard drive started failing, replaed with a SSD and bumped the ram up to 16 GB (at a time of Crucial) and ordered HP Recovery Media kit 67889-002-cd1 and 683958-b22 and if they follow-up procedure, the result would not start as the dod kit come with a boot disk to continue with a restore bootable , I aircrcrack a free 10 WIndows upgrade-following clean install and started in windows 10 successfully with declared wifi and blue tooth issues.   BIOS has been improved in troubleshooting the original drive and see updates.  I have installed and run sp74656...

    It is a dv6-6c10us (A6Y49UA #ABA)

    Thanks for your instructions detailed, I followed each in explicit order and still no wifi or bluetooth, so everything worked fine before the hard drive has begun to show intelligent questions, I decided to give the system recovery try together, I bought one another, or ten years...  Eventually I succeeded and adds this post of my DV6 on my network wireless thanks to recovery fully functioning of Windows 7!  The question proved that the recovery program would not attribute a system partition large enough to hold all of Windows 7. He would not move (or be fixed with manipulation) that he was trying to put a gallon into a pint container.

    It took me three attempts to penetrate deeply enough in what had happened to see it happen, but the recovery media composed three partitions-a great unallocated one or two small (from memory less than 100 MB) entire system and recovery.  Although the size of partition extended in every attempt, they were never big enough to contain everything they were supposed to.  Once I used a Windows 7 Home Premium disk to initiate a clean install and then set the partiction to a blank disc size manually and then run the recovery everything falls into place!   You might wonder why I didin't simply ise Windows 7 install from disk... too many exclamation points in Device Manager! -No driver found - nothing worked (worse than windows 10)... I could not update or import from the application and driver recovery CD that accompanied the system recovery media either! Therefore, I ran through the recovery process and it worked! Number 10 Windows always is the lack of a legacy driver appropriate for the wifi equipment, but ultimately the support of Windows 7 recovery worked and the laptop is perfectly to the point!   As soon as I finished posting here and sew all of HP and windows updates I will establish a recovery image and do.  I appreciate your help and hope, which has been posted here will help someone else - and save them time!

  • Colors of widget in settings fast and put off the power to the screen

    Just bought Z3 Compact but can not get used to lack of color on these and Notification screen after using the Samsung Galaxy range. Can white and wallpapers widgets be changed?

    Fine thank you. It seems an oversight since they are already in color also. One up to Samsung.

Maybe you are looking for

  • Thunderbird unplug prior auth TLS in IMAP

    I have a laptop running Thunderbird on Windows 10 38.2.0. I have an identical, as far as I know, the installation program on a stationary machine on the same LAN. The laptop still fails connection because he chooses to terminate it. A short snapshot

  • OfficeJet 7500 a large Format

    The HP printer is HPA9485 (HP Officejet 7500 E910).  The computer indicates that the printer is not on ahd the printer has ALL the buttons and the flashing screen elements works quickly in unison.  If I push the power button, the printer through its

  • predefine the trace color palette

    Has anyone found a way to change the set of colors used by Labview for color in a waveform or xy chart?  By default, the sequence of color is white, red, green, blue, yellow, purple, orange...  I'm working on a waveform graph that trace a sequence of

  • How to create a startup win xp boot cd

    I have an amd 400-1200 mhz with 512 MB mem and a 15 gig hd.  Also a cdrom and dvd player, also a 3 1/2 diskettes.  I have windows xp home with serv pk 1 & 2 ed..  Run all diagnostic tests, but it does not start my hd or the Dominican Republic to cd. 

  • Free trail

    What is the duration of the free modified trail?